Switch WS-C2960+24TC-L not recognized by CNA

Switch WS-C2960+24TC-L not recognized by Cisco network assistant. Switch is running on IOS 15.0(2)SE5, CNA 5.8(8.9). CNA show switch as wireless klient.
I tried upgrade but not help.

Yes 6.1 supports it , 5.8 does not
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html
With Cisco Network Assistant 6.0, you can manage these devices:
Catalyst 2960-Plus switches
– WS-C2960+24PC-L
– WS-C2960+24LC-L
– WS-C2960+48TC-L
– WS-C2960+24TC-L
– WS-C2960+48PST-S

Similar Messages

  • Can i upgrade this switch WS-C2960-24TC-L with lastest IOS 15.0(2)SE6.

    Can i upgrade this switch WS-C2960-24TC-L with lastest IOS 15.0(2)SE6. 

    Yes I see that this is supported on this switch. Upgrade to this switch should not face any problem.
    Suggested
    12.2.55-SE9(MD) 
    Latest
    15.0.2-SE6(MD)
    12.2.58-SE2(ED)
    http://software.cisco.com/download/release.html?mdfid=279963375&flowid=2547&softwareid=280805680&release=12.2.55-SE9&relind=AVAILABLE&rellifecycle=MD&reltype=latest
    HTH
    Regards
    Inayath

  • My Iphone 4 only charges when is switched off and it's not recognized by Itunes and Mac

    Hello guys!! Please help me if someone knows what should I do. My iphone was working perfectly so far but a couple of days ago it stopped charging, its not charging neither with the a/c adapter and with the usb through my pc. It says device not recognized.. Today I had my iphone switched off and tried to see if it was charging and actually it was! But it didn't show that it was actually charging (the battery icon with the bolt didnt appear..but after 3 hours it was fully charged..but this happens only when its switched off..so i cant connect on itunes and i cant charge it while its turned on!! If someone knows please help!!!!!
    I tried different cables and different computers and nothing. I can't restore because it's no recognized...
    Thanks a lot!!

    Hi, my iphone 4 was working fine a couple of days ago, but suddenly i plugged the device to my laptop and after a while i realized it wasnt charging, i have tested on a lot of computers but i got the same issue, even on a mac but its not detected.
    So finally i turned off and after a while i realized the phone was fully charged, at least i found a temporary solution to this problem but its really anoying to switch off to charge the phoen, if you solve this problem please let us know, apple should fix this problem.
    As you can see there is no charging logo when the phone is connected

  • Cannot switch after restart because bluetooth not recognized

    I am having a problem switching from OSX to windows because my bluetooth keyboard is not recognized during restart. So i am not able to hit the Alt(option) button while restarting to get the option of switching. Is there a way to fix/go around this?
    thank you.

    Not really - that would be the easiest option; I also have an older keybord nearby (also because Bluetooth is not as 100% troublefree as a wired connection). So, yes buy a third party keyboard or borrow one from a neighbor...

  • Can not config full duplex on Gi0/1 of WS-C2960-24TC-L

    Hi,
    I have a problem when connect two modules GLC-FX-100FE to two switch WS-C2960-24TC-L as below:
    When I plug each SFP module like above to each switch WS-C2960-24TC-L to SFP slot (gigabit 0/1: dual purpose port), then the duplex become to Haft.
    So, I can not configure them to full duplex as other copper ports.
    But when I use two switch WS-C3560G-24TS-S, I can do this.
    OS version of WS-C2960-24TC-L I am using is: c2960-lanbasek9-mz.122-55.SE7.bin, I think it is new.
    Please help me solve this problem.
    I have to explain to our customer in the next morning. You know, I am Vietnamese and in Vietnam, the time is 22:40 pm,
    Thank you so much.

    Hi,
    in interface configuration mode you have to configure
    media-type sfp
    Afterwards you can configure media-specific parameters like the duplex mode.
    Note: Changing the media-type will cause an outage for a couple of seconds.
    Hope that helps
    Rolf
    http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_55_se/command/reference/cli1.html#wp13646909

  • Cisco WS-C2960-24TC-S switch connectivity problam

    I configured my cisco WS-C3750X-12S-S with ip routing and it is working properly. i configured  a cisco  WS-C2960-24TC-S  switch and connect both switches via Fiber. each switches can communicate with other end. i can connect to C3750X from my local WAN, all interfaces are working properly but i cant connect to L2 switch from WAN. please help me.
    (test result pages attached)

    Dear
    the fast Ethernet interface on the switch is meant only for OOB (out of band management) so this way you will not be able to route traffic. It will not communicate to any other subnets apart from the connected subnet. Its better you create a SVI in the switch and use that SVI for management purposes.
    regards
    Najeeb

  • Why choose Cisco Catalyst WS-C2960-24TC-L Switch ?

    As the new family of fixed-configuration standalone devices, Cisco 2960s series intelligent Ethernet Switches provide desktop 10/100 Fast Ethernet and 10/100/1000 Gigabit Ethernet connectivity for entry-level enterprise, mid-market, and branch office networks
    to enable enhanced LAN services.
    Why choose cisco WS-C2960-24TC-L ?
    The Cisco Catalyst WS-C2960-24TC-L has hardware enhancements for network managers, including configurations featuring dual-purpose (alternatively wired) uplinks for Gigabit Ethernet, allowing the network manager to use their Cisco switches as either a copper
    or a fiber uplink.

    Agreed! WS-C2960-24TC-L has hardware enhancements for network managers, and if you want to buy it, here 3anetwork.com  64%
    off, USD 460 ! 

  • WHEN I CONNECT MY IPOD SUFFLE 2ndGENERATION 1 GB THE PC SAYS DEVICE NOT RECOGNIZED ,MOREOVER WHEN I SWITCH ON MY IPOD FIRST GREEB=N THEN ORANGE LIGHT BLINKS

    WHEN I CONNECT MY IPOD SUFFLE 2ndGENERATION 1 GB THE PC SAYS DEVICE NOT RECOGNIZED ,MOREOVER WHEN I SWITCH ON MY IPOD FIRST GREEN THEN ORANGE LIGHT BLINKS

    Hello Ateev Juneja,
    Thanks for using Apple Support Communities.
    Please follow the 5 R's of troubleshooting your iPod shuffle in the link below to help resolve this issue.
    iPod shuffle (2nd generation) Troubleshooting Assistant
    https://www.apple.com/support/ipod/five_rs/shuffle2gen/#
    Take care,
    Alex H.

  • Ipod Nano2 is not recognized by PC/itunes.  After restarting the iPod and switch to disk mode "ok to disconnect" appears instead on "do not disconnect".

    Can nayone help.  thank you in advance.

    So even in Disk Mode the iPod is not recognized by your PC or iTunes software?  Are you plugging the iPod into a high powered USB 2.0 port?  Have you tried a different USB sync cable to verify that your current cable isn't faulty or damaged?
    I assume you are using the latest version of iTunes correct?
    B-rock

  • WS-C2960-24TC-L - %PLATFORM_PM-3-HOSTACCESSFAIL - error

    Hello,
    I have issue with 3 ports on the switch.
    Once I put he following commands under the port I got error message : 
    authentication control-direction in
    authentication host-mode multi-auth
    authentication port-control auto
    authentication periodic
    authentication timer restart 240
    authentication timer reauthenticate server
    authentication timer inactivity server
    mab
    *Jun  7 06:45:18: %PLATFORM_PM-3-HOSTACCESSFAIL: Unable to configure hardware to restrict host access on Fa0/17.  Port may not behave as expected.
    *Jun  7 06:45:18: %PM-4-ERR_DISABLE: port-mode-failure error detected on Fa0/17, putting Fa0/17 in err-disable state
    I have the same configuration under other ports and I don't have any issue.
    When I remove these commands , these 3 ports are working fine.
    What's going on ?  Can you help me to find the root cause ? 
    The device is WS-C2960-24TC-L, Version 12.2(58)SE2
    The current configuration of port is here : 
    interface FastEthernet0/17
     switchport access vlan 274
     switchport mode access
     switchport nonegotiate
     switchport voice vlan 1293
     speed 100
     duplex full
     mls qos trust dscp
     spanning-tree portfast
    Thank you,
    Jan

    Hi Kartnik,
    I found some bugs related to these error message and one is describing our issue : 
    CSCui14520
    Symptom:
    Several ports which are 802.1X-enabled port go into err-disable intermittently.
    Jan 21 13:56:09: PLATFORM_PM-3-HOSTACCESSFAIL Unable to configure hardware to restrict host access on Fa0/9. Port may not behave as expected.
    Jan 21 13:56:09: PM-4-ERR_DISABLE port-mode-failure error detected on Fa0/9, putting Fa0/9 in err-disable state
    Workaround:
    "shut" / "no shut" the port
    Last Modified:
    Apr 7,2014
    Status:
    Terminated
    Severity:
    3 Moderate
    Product:
    Cisco Catalyst 2960 Series Switches
    Known Affected Releases: (1)
    12.2(53)SE2
    Known Fixed Releases: (0)
    No release planned to fix this bug

  • IPod nano does not charge & is not recognized by computer or iTunes

    I have a 1st generation nano 1 GIG.
    It appears "dead."
    It is not recognized by My Computer, iTunes or the Ipod Updater (The updater asks that I connect the iPod, which I do). The iPod diagnostics through iTunes also reports that my iPod is not connected.
    I have tried my iPod on 4 different machines, with one of them having USB 2.0.
    I tried the following from Jeff Bryan. (I don't know if the links from his post have carried over into this post.) So I will list the things I have tried near the end of this post.
    - My iPod won't turn on.
    - iPod battery doesn't charge.
    - iTunes 7 doesn't recognize the iPod.
    - Your Windows PC doesn't recognize iPod.
    - iPod appears in Windows Explorer but does not appear in iTunes.
    - iPod does not appear in iTunes.
    - Fast user switching in Windows XP is not supported.
    I tried resetting my iPod by switching the Hold button on and off and then pressing Menu and the Select button for 6-10 seconds. I have done this over and over and over.
    I have uninstalled the latest iTunes, reboot, reinstall - same problem.
    I have stopped the iPod service, plugged in the iPod, but it isn't recognized by My Computer as stated in the Apple Do-It-Yourself Help. I launched iTunes - same problem.
    I used the window cleanup utility, reboot, reinstall iTunes, connect iPod - same problem.
    I have used the Windows ipconfig utility to change my boot parameters, but still nothing.
    If anyone has any ideas, I would greatly appreciate them.
    My iPod is just shy of 6 months.
    I do have a replacement contract with Best Buy - but I would like to cover all the bases before I succumb to defeat.
    Thanks
    XP Home with USB 1.1   Windows XP   4 machines, all XP, 2 XP Pro, 2 XP Home, 3 have USB 1.1, 1 has USB 2.0, 2 machines have latest iTune

    I'm having the same problem, my ipodnano is about a year old and I can't figure out what to do. I just installed the new itunes on my new laptop with vista premium. I'm desperate for a resolution, do you have any suggestions at all. Any help is greatly appreciated. Thank you

  • Ipod nano not recognized by itunes and won't charge

    Ipod nano is about 3 months old, worked fine before with itunes, but now ipod doesn't start itunes, doesn't show up in finder, and doesn't charge.
    I have switched usb ports, reset the ipod, downloaded itunes 6. I downloaded ipod update, but computer doesn't recognize ipod so it isn't updated. I tried "restore", but again not recognized. I tried Isync but it can't find ipod.
    Do I need a new cable that attaches ipod to computer?
    powrmac   Mac OS X (10.4.6)  

    Hello,
    The cord might be the case, but first, try these suggestions:
    Try putting your iPod into disk mode, then try connecting it to your computer again...
    <a href="How to put your iPod into disk mode</a>
    Do you have a wall charger? If so, then try connecting your iPod to that, and does it charge, or not?
    Have you checked this link out?:
    <a href="http://docs.info.apple.com/article.html?artnum=60941">iPod doesn't charge correctly
    Does your iPod appear in "My Computer"? If so...
    iPod shows up in Windows but not in iTunes
    If not...
    iPod missing in "My Computer" or in iTunes
    Post back on what happens when you try these things out. I hope this helps!
    ~~Kylene

  • XP Prof installation on Tecra A9 PTS52E - SATA HDD is not recognized

    Hi all,
    I have a brandnew Tecra A9 (PTS52E) with Vista Business installed. However, I need XP Prof and have a slipstreamed XP-SP2 CD. The SATA Disk is not recognized from XP setup, so I need a 'F6' driver.
    There are a lot of howtos about doing this for the 945 chipset, but I couldn't solve this on my A9 (Mobile 965 Express Chipset). I don't want to buy a USB-Floppydisk drive just for one-time-installation. So I have to build the driver (iastor.sys and more) in the XP setup disc.
    Some problems: there seems to be no easy way to do this, because intel only provides *.inf files for the ICH8R (=RAID) controller, which doesn't exist in the A9. So I have to edit the *.inf files, correct?
    Another thing: I saw in another posting here the discussion about switching from AHCI to compatibility mode in BIOS. I can't find a way to change this setting.
    Aargh, I need this Notebook for my work, on a A8 (which also is mine) I installed XP without any problems.
    Can anyone help?
    Thank you,
    Michael
    Message was edited by: michael-cologne

    Hi,
    now i have a new problem: the last reboot after installation finished leads to bluescreen and immediately reboot (so I can't see the stop-message)
    During installation the reboot from Harddisk works.
    But so far:
    you need the latest Intel Chipset Driver:
    http://downloadcenter.intel.com/T8Clearance.aspx?url=/13499/a08/infinst_autol.exe&agr=N&ProductID=2800&DwnldID=134 99&lang=deu
    Next you must extract the files in a temp directory:
    IATA75 _ENU.exe -a -a -pC:\temp\AHCI
    Now edit the file iaahci.inf:
    you have to change all the ICH8R related entries (R means RAID, which isn't supported in that A9 version of the chipset) to ICH8. Also change the related PCI-device IDs from 0x8086h/0x2821h (Vendor/Device ID) to 0x8086h/0x2824h.
    The best way I think is to copy all ICH8R related sections and replace "ICH8R" with "ICH8" and "2821" with "2824".
    As you need the driver during installation, you also have to change these settings in txtsetup.oem.
    The next steps I found in a ASUS forum (they have similar problems):
    create a new (personalized) installation CD for Windows XP
    STEP 1: Modify the original XP installation files
    a) Copy all the files and directories of the XP installation disk to your hard drive
    Ex: form D:*.* (your installation CD) to C:/XP/*.* (your HD)
    b) Create the following directory path:
    XP\$OEM$\$1\drivers\SATA
    c) Copy all the files of the Intel Matrix Storage Manager (see solution I) to that directory: XP\$OEM$\$1\drivers\SATA
    iaAhci.inf, iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and TxtSetup.oem.
    d) Copy iaStor.sys to XP\i386 directory
    e) Modify the file TXTSETUP.SIF located at: XP\i386
    => You can read and understand what you are doing reading Adding OEM drivers to Windows Setup at http://www.windowsserverx64.com/CSK/technical_articles/hardware/56.aspx (really nice article form Robert. Thanks)
    Use: notepad.exe to edit it.
    e.1) Under [HardwareIdsDatabase] add the following lines
    right after GenFloppyDisk = "flpydisk"
    PCI\VEN_8086&DEV_2821&CC_0106 = "iaStor"
    PCI\VEN_8086&DEV_2824&CC_0106 = "iaStor"
    and before PCI\VEN_8086&DEV_1230 = "intelide",
    Note: dont touch any other line. Be carefull, the name iaStor => is case sensitive.
    e.2) under [SourceDisksFiles] add
    iaStor.sys = 1,,_x,4,1
    Note: There are several [SourceDisksFiles] sections. I added the line in all the existing sections.
    e.3) under [SCSI.Load] add
    iaStor = iastor.sys,4
    e.4) under [SCSI] add
    iaStor = "Intel(R) 82801HEM/HBM SATA AHCI Controller (Mobile ICH8M-E/M)"
    Note: If your controller is a different one, use the right one. Read the contents of the TxtSetup.oem file for more information.
    f) Create a new file called (use notepad) WINNT.SIF and locate it at: XP\i386
    [Data]
    AutoPartition=0
    MsDosInitiated=0
    UnattendedInstall=Yes
    [Unattended]
    UnattendMode=ProvideDefault
    OemPreinstall=Yes
    OemSkipEula=Yes
    NoWaitAfterTextMode=1
    NoWaitAfterGUIMode=1
    WaitForReboot=No
    TargetPath=WINDOWS
    DriverSigningPolicy=Ignore
    OemPnPDriversPath="driversSATA"
    [GuiUnattended]
    OEMSkipWelcome = 1
    [UserData]
    ProductKey=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
    FullName=EnterYourName
    OrgName=EnterYourOrgName
    Note: Use your own product key
    Now use a tool to create a bootable CD. I prefer "AutoStreamer" because I also have to slipstream SP2 into my XP Prof. CD.
    With it you generate an iso image. Burn it to disk and that's it.
    Like I've said: installation works well, just the last reboot from disk creates a bluescreen and therefor a bootloop.
    Regards,
    Michael

  • Problem on Ebay that Firefox 5 is not recognized?

    Hi, I just updated my browser to Firefox 5 yesterday (I used to have Microsoft Explorer) and today I tried to list a classifed ad on ebay.co.uk and the ebay system generated an automatic error message saying that I need to update above Firefox 1.5 so it is not recognizing Firefox 5 and I was not able to input the information on the ebay system. I contact Ebay help and there only suggestion was to switch over to Microsoft Explorer. I would prefer to keep using Firefox - do you have any suggestions. Please let me know if you have any questions.

    In case you did not get why Ed gave you that link, you appear to be posting with a Firefox 3.5.5 useragent . It was not until Firefox 4.0 and newer that Mozilla made it so extensions could not tack stuff on end and potentially make the UA get stuck at the version one had when a the extension that affected it was installed.
    Your useragent.
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5 FBSMTWB

  • Logic/Mackie Control not recognized in Logic 8

    Logic Control problem with Logic 8. Apparently the Logic/ Mackie Control should work with Logic 8, but since I installed Logic 8 the Control is not recognized when scanned in the setup. I am using a AMT8 interface and everything worked fine with Logic 7 before. The Mackie Control is running version 1.02 in "Logic Control Mode". It is recognized in the Midi/Audio Setup of my mac, but not in Logic 8...

    Update: I discovered the cause of the problem: My Apogee Ensemble audio interface. Only after I switched it off Logic 8 would recognize the Logic/Mackie Control. I switched the Ensemble off , launched Logic and voila: Logic Control is scanned and works. The next thing was switching on the Ensemble while Logic was running, now both the Logic Control and Ensemble worked, but quitting Logic and starting it again while Ensemble is running can cause Logic Control to not work properly as I discovered e.g. no display and no fader movements. So this is a bug and Apple's claim: The Logic/Mackie Control is fully compatible is not entirely true as long as you are using the Ensemble interface by Apogee which is a co-production between Apple and Apogee. So I'd say this isn't very well tested by Apple. I hope they fix it soon

Maybe you are looking for