Switch WS-C3750X-24 Auto Restart

Dear Cisco Team,
My switch-02 mostly auto restart which running as switch stack with switch -01.
I checking found that the Last reset from power-on
Please share me the solution.
SFSW-B#sho switch stack-ports summ
Switch#/ Stack Neighbor Cable Link Link Sync # In
Port# Port Length OK Active OK Changes Loopback
Status To LinkOK
1/1 OK 2 3 m Yes Yes Yes 30 No
1/2 OK 2 3 m Yes Yes Yes 30 No
2/1 OK 1 3 m Yes Yes Yes 1 No
2/2 OK 1 3 m Yes Yes Yes 1 No
SFSW-B#sh version
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 02-Dec-10 06:08 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02800000
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
SE-B1-SVRM-SFSW-B uptime is 6 weeks, 6 days, 7 hours, 28 minutes
System returned to ROM by power-on
System restarted at 01:14:45 UTC Sun Feb 8 2015
System image file is "flash:/c3750e-universalk9-mz.122-55.SE1/c3750e-universalk9-mz.122-55.SE1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750X-24 (PowerPC405) processor (revision A0) with 262144K bytes of memory.
Processor board ID FDO1636R2EG
Last reset from power-on
2 Virtual Ethernet interfaces
1 FastEthernet interface
56 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 6C:20:56:66:55:00
Motherboard assembly number : 73-12530-08
Motherboard serial number : FDO16361JPB
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750X-24T-S
Daughterboard assembly number : 800-32727-03
Daughterboard serial number : FDO16360SLN
System serial number : FDO1636R2EG
Top Assembly Part Number : 800-31327-07
Top Assembly Revision Number : A0
Version ID : V04
CLEI Code Number : COMJV00ARD
Hardware Board Revision Number : 0x04
Switch Ports Model SW Version SW Image
* 1 30 WS-C3750X-24 12.2(55)SE1 C3750E-UNIVERSALK9-M
2 30 WS-C3750X-24 12.2(55)SE1 C3750E-UNIVERSALK9-M
Switch 02
Switch Uptime : 8 hours, 6 minutes
Base ethernet MAC Address : C8:9C:1D:E0:F5:80
Motherboard assembly number : 73-12530-05
Motherboard serial number : FDO15070S7P
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750X-24T-S
Daughterboard assembly number : 800-32727-01
Daughterboard serial number : FDO1505182W
System serial number : FDO1506R1CL
Top assembly part number : 800-31327-02
Top assembly revision number : A0
Version ID : V02
CLEI Code Number : COMJV00ARB
License Level : ipbase
License Type : Permanent
Next reboot licensing Level : ipbase

can you please share config?

Similar Messages

Premiere CC 2014 causing auto-restart?

I have a MacPro 3,1 with 10.10 and 32GB RAM.
During editing in Premiere CC 2014, the computer has auto-restarted twice in the past hour. Both times, I was doing something different in Premiere (dragging several clips forward in time & rendering all video) so I'm unsure as to what triggered it. The footage is stable and on a clean, problem-free external RAID. I also noticed that now, two of my 4GB DIMMs are not recognized. (note: all DIMMs have tested positively with Rember, and are of the same manufacturer) In the meantime, I have removed the two DIMMs in question and now have four DIMMs on the top riser, two on bottom. The two slots that have caused problems seem to be fine now, but with every restart, things changes—that's why I do not believe the issue to be the actual DIMMs themselves.
I have the crash report and need to rule out issues in the crash report if there are any. I will post the report if the smarter people out there believe it to be necessary. I HOPE the problem is with Premiere, the RAM and not one of the risers.

I had a similar problem with Arri Amira Prores 4444 footage and found out the cause from the Arri website:
"When AMIRA footage is ingested into Premiere Pro, the appropriate LUT from the camera is automatically applied as a Lumetri effect, which can be toggled off if necessary."
The way to switch it off is to right-click the imported master clip(s) and go "Remove Masterclip Effects" , the cause of the baked-in look.
Hope that helps.
Kris
editing.dunked.com

Iphone 5 auto restarts

Hi,
I have had my iphone 5 for 2 months, and as of yesterday, the battery all of a sudden has started draining ridiculously fast, and I can't switch the phone off. every time I try it auto restarts.
I have tried the reset by holding down the two buttons for 10 seconds, and it still restarts.
Any ideas?
Thanks

Try Restoring it in iTunes. If that does not work you will probably need to get it serviced.

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help.

Front end and console ports are down for switch WS-C3750X-48PF-S

We have a switch WS-C3750X-48PF-S in the stack and front end and console ports stopped working and are down.
I have tried to replug power cable but this didn't help, please let me know if I could replug stack power for this switch without outage of other switches in the stack, since switches are connected into the ring
Please let me know what might be the possible root cause
#sh switch stack-ports
  Switch # Port 1 Port 2
    2 Down Ok
    3 Ok Ok
    4 Ok Down

Hello,
There is a problem with the stacking connection between switch 4 and 2. Can you try replacing the stacking cable between these switches?

Auto Restart Issue with Mac Book AIR

Have been using a Macbook PRO for sometime, no problem with Parallel installed. Due to frequent traveling, light and compact is my priority now, so I bought another AIR (11" i7 chip w/ Parallel installed as well). It was working flawlessly for few weeks, used it to download a couple of updates when I was in China (approx. 4Mbit/sec line speed) still no issues. UNTIL when I get back to my office and using WIFI updated another few stuffs, the AIR started to behave strangely with "your computer needs to restart due to problem ..." the last few days it happened at least 10 times daily, so I did what I know with the usual Mac way, reset PRAM, repair permissions blah blah blah ..problems persists so I called the service centre and the technician I talked to suggested the issue could be from 'your moderate internet speed causing incomplete system updated files.' ; half convinced but I followed / reinstalled ...with no CD, it has to press option to select to reinstall -- only then I realized a big problem, originally it states requires 27 hours to reinstall a fresh LION in my AIR but finally it completed and restated in still about MASSIVE 7-1/2 hours time.
As I have bought a USB network connector now (a convenient gadget when stays at hotels with different levels of facilities offered), this is not so troublesome and I think fellow users should consider using network and avoid using WIFI for this purpose. I notice once the left USB once was used (without turning off the WIFI) it keeps breaking the connections, as I read some articles from this forum the left USB could has some stability issues. After all the time spent, the computer freezes at times and auto restarts again. What the heck has this causes the AIR to behave this way ?
NEXT, I also read on the Power issues, I bought it without realizing one of the technical highlight is on high performance battery management but you can chop my head off and sit on mine if the AIR can last 3 hours (probably the suggested time is with computer power on but without using it at all). I don't want to sound un-nice as I have been using Mac for many many years: 1) if AIR is entirely basing on internet (VERY HIGH SPEED) for support is not a really very friendly method for users if there is reliability issues via internet line support, says what if we are caught in remote area with 30k/sec line speed then we are totally dead ... ; 2) the recent scare makes me dare not using the software updates now, as technician suggested, write down what is required to update, find it from apple and do it manually ...Goohs, my Mac Book Pro using side by side doesn't has this issue. Since when was the last time I have to suffer maintaining a Mac myself ? ... @%#&@*!(!
Anyone has clue to these or simply return to service centre to handle for me ?
Thanks in advance (first time user in this community).

Hello!
I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
Any sugestion? Big houses are a problem...
Best regards, and once again thank you!
Antonio

Please Help! My MB pro 2010 quit and auto restart when I upgrade my MB Pro with a SSD

Hi all!
Please let me know what's happen with my Mac & help me to solve this problem pls?
Since my Mac is on normall working but a little bit slow. So that's why I update it to SSD. But from that day, when I'm working, it suddenly quit & auto restart without reason, just only appear the warning " Your Mac have problem" & restart.....
Attached here is which appeared on my screen after it auto restart, please go throught it & let me know what I should do for avoiding this problem, pls!
And here is my MAC info :
Macbook Pro 15-inch, Mid 2010
Processor 2.4 GHz Intel Core i5
Memory 8 GB 1067 MHz DDR3
Graphics Intel HD Graphics 288 MB
Software OS X 10.8.5 (12F45)
My SSD info:
Total Capacity                       : 256.1 GB (256,060,514,304 Bytes)
Model                                   : V4-CT256V4SSD2
Firmware Version                  : S5FAMM22
Drive Type                           : Crucial SSD
HDD info:
Total Capacity                       : 320.1 GB (320,072,933,376 Bytes)
Model                                    : Hitachi HTS545032B9SA02
Firmware Version                   : PB3AC60W
Drive Type                             : HDD 5400 rpm
Please Help me!
Thank you!

Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton

HI .. I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet. used the power switch, when I tried to restart I got audible 'beeps' from it.

HI ....I have a new macmini 2.5 Ghz 10.7.3 Lion, had a problem today ,it froze so I could not shut down using mouse or tablet pen. used the power switch, when I tried to restart I got audible 'beeps' from it. I managed to restart it but kept getting a message come up on one ot the dual screens ' restart using the power swich to turn it off , then press it again to restart.'
This worked okay , but now it just keeps freezing whenever I start it up. I thought the issue could be my old Epson Expression 1680 scanner not being compatible , so I have unplugged it. I also had a look at the new memory I installed when I got it, but this seems not be the problem.
It is connected up to an Eizo Flexscan S2231W using a cable straight into the HDMI input , the other monitor is a small Acer using the VGA into Thunderbolt port.
When I turn the Eizo screen on first and then press the power button on the mac-mini, I hear the chime then the screen flahes the 'Digital no signal' message on and off for about 30 seconds , then the monitor comes on as normal. But it is still freezing up on me after using it for a while and I am having to use the power switch button to turn it off again.
Can anyone help please.

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

Ios 6, my wifi doesnt work, even after switching wifi on and off, aswell as removing saved wifi spots and switching from manual to auto

ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!

You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all)

I-Tunes Auto-Restart After Closing Program

My i-Tunes began automatically restarting when I close the window on my desktop. It is pretty annoying.
It only restarts after I have had it open. If I have not opened i-tunes it behaves. But, if I open i-Tunes to listen to music on by desktop, and then close the program when I am done, it will restart within 10-seconds.
I am using Windows 7 and i-Tunes 10.2.2.12
I can't find a solution and sfter 15-minutes of trying to find a link to submit a help request, I gave up and am trying this avenue.
Thanks
Walt
PS: In the Product selection below, i-Tunes is not one of them. Hope this gets where it needs to go.

Thanks!
Shall I create de novell partition on the new\replaced HD?
Will Novell recreate the mirrored volumes automatically or shall I rebuild them manually?
TIA
Nanu
>>> Marcel Cox<[email protected]> 07/01/2007 20:47:06 >>>
Nanu Kalmanovitz wrote:
>
>Can be the "auto restart after abend" during the loading of NLMs be caused
>by the second HD dos (drive d:) partition?
Yes. FATFS.NLM tries to mount all FAT partitions it finds, not just the
boot partition. So any problem FAT partition may cause trouble.
>I tried the "FORMAT D: /s /x" command but it display the "Bad track in
>system space, disk unusable" error.
This sounds like your disk is physically broken. As a short term solution,
you can probably delete the DOS partition on D: but not create it again.
That way, FATFS.NLM will not try to fix the broken part of your disk. Of
course, you should as soon as possible replace your disk.
For this, you should first create and copy your DOS partition manually on
the new disk and then start your server and use NSSMU.NLM to manage the
mirroring of the NetWare partition(s).
Marcel Cox (using XanaNews 1.18.1.6)

My ip5 auto restarting itself lately, how to stop this problem?

My ip5 auto restarting itself lately, how to stop this problem?

It cannot just change itself. If it has not been changed by someone using the phone, then the only other thing I can think of is that the phone is on a corporate Exchange account, and the passcode has been changed by the administrator. If that is not the answer then the phone will have to be restored.

[SOLVED] NetworkManager auto restart even though I stop it.

Hi,
I enable NetworkManager at system boot.
# systemctl enable NetworkManager.service
After I stop NetworkManager manually, and run chromium/firefox, it restart NetworkManager again.
# systemctl stop NetworkManager
> Active: inactive (dead) since Fri, 12 Oct 2012 12:37:51 +0800; 24min ago
$ chromium
! NetworkManager auto restarted.
# sysetmctl status NetworkManager
> Active: active (running) since Fri, 12 Oct 2012 12:44:13 +0800; 17min ago
After a little dig by myself, I found out the restart was called by D-Bus.
$ journalctl _SYSTEMD_UNIT=dbus.service -f
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Oct 12 12:44:13 -- dbus[566]: [system] Activating via systemd: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Oct 12 12:44:13 -- dbus[566]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Oct 12 12:44:13 -- dbus[566]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Oct 12 12:44:13 -- dbus-daemon[566]: dbus[566]: [system] Successfully activated service 'org.freedesktop.NetworkManager'
Oct 12 12:44:13 -- dbus[566]: [system] Successfully activated service 'org.freedesktop.NetworkManager'
So, my problem is, How can I stop NetworkManager permanently?, so that I can use both netcfg and NetworkManager side by side, but I don't want to disable NetworkManager at system boot.
Thanks for any help.
Last edited by GutenYe (2012-10-13 00:59:23)

I finally found same issue and solution at https://bugzilla.redhat.com/show_bug.cgi?id=815243
If you want to disable NetworkManager auto-restart feature, follow bellow
# cp /usr/lib/systemd/system/NetworkManager.service /etc/systemd/system
# vi /etc/systemd/system/NetworkManager.service
#Alias=dbus-org.freedesktop.NetworkManager.service # comment it.
# rm /etc/systemd/system/dbus-org.freedesktop.NetworkManager.service
Thanks for the helping.
Last edited by GutenYe (2012-10-13 00:59:04)

PSWATCHSRV does not auto-restart causing app server domain instability

Current environment:
- Solaris 10
- Oracle 10.2.0.4
- PS HRCS 9.0
- PTools 8.49.19
- Weblogic 9.2
- Tuxedo 9.1
We have two PIA web sites that reside on the same PIA web domain. They each interact with a different app server domain residing on csapp81. One is assigned a jolt listening port of 9060 (CS90SBX) and the other uses 9030 (CS90UNT). Recently, after patching the PTools to 8.49.19, we discovered that occasionally the PSWATCHSRV in one of the app server domains will shut down and not restart. The domain continues to run without the WATCHSRV but then erratic behavior in the PIA is observed:
- Users attempting to access worklists are logged off
- Reports stop posting from PSNT and PSUNX
- Users attempting to navigate to reports already posted are logged off with "An Error Has Occurred" message
- Some users are unable to log in and see a message in red on the signon page: bea.jolt.ServiceException
Re-booting the app server domain will solve the problem temporarily until the PSWATCHSRV shuts down again. We have noticed that in the app server that is not affected, the PSWATCHSRV restarts one second after shutting down whereas in the affected domain it never auto-restarts. We have tried re-building the web server and app server domains but this does not affect the problem. There appears to be no difference between the two domains. In fact a couple of weeks earlier SBX was working fine and UNT was affected. Now it's the exact opposite and we have another environment (CFG) showing the same behavior.
The proof the problem exists:
Verified the issue by the application server log file <APPSRV_0602_SBX.LOG>, which displays that PSWATCHSRV has been shutdown and never restarted:
PSAPPSRV.11610 (3) [06/02/09 12:48:40 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=124840_11610.3, Token=PSFT_HR/2009-06-02-05.48.40.000003/PS/ENG AAAAmwECAwQAAQAAAAACvAAAAAAAAAAsAARTaGRyAgBOZQgAOAAuADEAMBTG0ddiK9wa09fTauVpwsrNvqJDmwAAAFsABVNkYXRhT3icPcZNDkAwFEXh02oM7YS8VAkL8DMSwdzILi3O6xu4J/lygcf5IuDQ+Tcb2DlLJjaWKn9mLm5WjkREtJFa7c1odjQkBlNU+Wv5APmFCio=
PSWATCHSRV.11609 (0) [06/02/09 12:52:38] Shutting down
PSAPPSRV.11612 (29) [06/02/09 12:55:45 [email protected] (NETSCAPE 7.0; WINXP) ICPanel](3) (PublishSubscribe): PublicationManager::Publish(): publication a18e2838-4f31-11de-9268-83dc49eeb5cf.USER_PROFILE published in 0.0900 seconds
My question is: Has anyone else ever seen this behavior in an 8.49.19 environment? If so, how was it resolved?
We are now conducting UAT and the occasional disruption of having to restart the app server just so people can login to the system is not making a good impression on the customer.
We have an open SR ticket with Support but as yet they have not been able to help us...

Looks like Tuxedo is not doing he's job. You should double check the Tuxedo version and rolling patch installed.
And also the configuration of AppServer, section "PSWATCHSRV", if the interval is set to 0, then it is disabled.
Moreover, from your output it is difficult to understand what's going wrong.
Nicolas.

"...reverting changes.": I get this in VISTA 64 bit vm and always auto restart prior start complete, without let me do anything... well?

Updates were not configured correctly. reverting changes.
I get this in VISTA 64 bit vm and always auto restart prior start complete, without let me do anything... well?

I pause vm --- what else can do?
I tried apply vista updates... initially

Windows Media Player keeping Automatic Maintenance window/Windows Updates from doing auto-restart

I have a system that is connected to a domain, and it runs a video playlist in Windows Media Player for digital signage upon bootup (and auto-login). WMP is set to loop the videos over and over again, but it also is preventing automatic updates from
installing and/or auto-restarting at 3:00AM in the morning (and yes, the system power management is set to keep the computer on all the time).
How can I fix this?
I have a GPO set up to install updates and restart automatically (option 4). I tried the GPO option to use the Windows 8 maintenance window to install updates, and also tried turning that option off and just using a 3:00AM restart period. Neither
option seems to work, so it looks like Windows Media Player is preventing an auto-restart to finish the update installation. Is there any way around this, so that Windows Media Player doesn't stop Windows Updates from doing its job? I don't care
if that means the video stops playing because it just starts up again on the next bootup.
I looked at the WMP GPO's and the only option that sounds like it's related is the option to turn on or off the auto-updating of media info for WMP, but it has nothing to do with what I'm trying to accomplish. If I missed something, let me know.
If there is some other way to accomplish this, such as associating and launching the playlist file with the Xbox Videos app, I would be fine with that, but I need it to loop the playlist continually (I also use the Shuffle option
in WMP - ***see note below for another question). I still want the system to automatically install updates and reboot on a regular schedule despite the video playing in the foreground.
***Side question: is there any way to turn Repeat and Shuffle options on in WMP without having to load the GUI (for scripting a playlist)?
Just FYI: this system is actually using Windows Embedded 8.1 Industry Enterprise (from a MAPS account), but it isn't customized aside from not having the standard WinRT apps from a stock Win 8.1 install loaded - it is a stock install from the ISO.
From what I understand, it is the same as Windows 8.1 Enterprise, except that it is only licensed to be used as an "appliance" machine for a single role - which it is. So I'm assuming that there are no actual differences from a "regular"
Windows 8.1 SKU that would cause this issue. If I am completely mistaken about this, please notify me on it. The reason I'm making this statement is in case there are any differences in Embedded 8.1 Industry Enterprise that I am not aware of.
Otherwise, I welcome any assistance that would target a "regular" version of 8.1 Enterprise. NOTE: Someone said to post this into the Windows Embedded forum, but the only one that exists is the one for POSready - and this is HARDLY the
POSready version of Windows Embedded that I'm using.

Hi,
Did you use the policy Local Computer Policy\Administrative Templates\Windows Components\Windows Update\Always automatically restart at the scheduled time?
I noticed an description "restart with logged on users for scheduled automatic updates installations" policy is enabled, then this policy has no effect." it means if system installed some updates which unneeds restart computer, this policy would has no effect.
In my opinion, your problem should not caused by WMP setting. please check your installed updates whether they need restart computer.
In addition, Power Managment in Control Panel also can prevent the schedule task running.
Control Panel\System and Security\Power Options\Edit Plan Settings\Change advanced power settings\Sleep\Allow wake timers
Please make sure this option is enable.
Roger Lu
TechNet Community Support

Switch WS-C3750X-24 Auto Restart

Similar Messages

Maybe you are looking for