"Switchboard (reagiert nicht). "Switchboard does not answer" HEEEEEElllllllPPPPP !
Hallo,
Bin auf Power Mac.
Adobe Photoshop Version: 2014.2.2 20141204.r.310 2014/12/04:23:59:59 CL 994532 x64
Betriebssystem: Mac OS 10.9.5
Aktivitätsanzeiger zeigt immer wieder die Meldung "Switchboard (reagiert nicht) (Rot)
Habe das Dossier SwitchBoard bereits einige Malen aus die Preferences gelöst
und auch ein neuer User angemeldet.
Problem bleibt bestehen.
Konnten anfänglich Mini-Bridge in CS6 anklicken ... bliebe aber hängen.
Kann heute Mini-Bridge in CS6 überhaupt nicht aufrufen.
Und sonst ist Bridge CC sehr langsam im Vergleich zum früheren Bridge CS6
Hat irgend jemand eine Ahnung was los sein könnte ?
Viel Dank im Voraus.
JM
Hello,
Working on a Power mac.
Adobe Photoshop Version: 2014.2.2 20141204.r.310 2014/12/04:23:59:59 CL 994532 x64
Betriebssystem: Mac OS 10.9.5
The activity mesure of my engine always figures: Switchboard (does not answer) (in red).
I deleted "Switchboard" from the preferences (like the Support proposed me to do) and
tried a new user ... Does not matter: I always get the same failure mention.
At the beginning of the trouble, I could click on Mini-Bridge in CS& but it let me hang on.
Now I can not use mini-Bridge in CS6 at all. No answer at all !
And Bridge CC ist very slow compared to Bridge CS6
Anybody an idea how to fix this ?
Thank you in advance.
JM
Hello John T Smith,
I had contact with two people oft this so called "support".
The both told me the same ... and I did follow their instruction strictly,
helped by a very good Mac technician.
Nothing helped !
So I wrote them again ... and, you know what ?
They send me AGAIN, exactly the SAME useless ANSWER.
That's why I am here, asking for help.
And now, I suppose, they will erase my post ... ?
Sorry ... I am loosing patience ...
Best regards,
JM
Similar Messages
-
2811(NM-8AM) does not answers incoming call from PC
Dear friends,
We are planning to setup an out of band management connectivity, in our test setup we have a Cisco 2811 ISR (with IOS 12.4(9)T5 ) with NM-8AM (Analog modem module) installed.
Test Setup:
1. One Analog line (PSTN) connected to PC via built-in modem
2. Second Analog line (PSTN) connected to Cisco 2811 (NM-8AM) terminated on the analog modem module
3. Both the analog lines are working fine.
Test Scenario:
1. The router should accept the incoming call from PC. And from the PC we should be able to telnet into the router via dial up connectivity (Out of band)
Test procedure:
1. The Cisco 2811 router is configured as follows:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Dial-Up-CPE
boot-start-marker
boot-end-marker
logging buffered 16384 debugging
enable password cisco
ip cef
voice-card 0
no dspfarm
username cisco password 0 cisco
interface Loopback0
ip address 10.10.10.1 255.255.255.255
interface FastEthernet0/0
ip address 20.20.20.1 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Group-Async1
ip unnumbered Loopback0
encapsulation ppp
dialer in-band
dialer idle-timeout 600
dialer-group 1
async mode interactive
peer default ip address pool DIALIN
ppp authentication pap chap
group-range 1/0 1/7
ip local pool DIALIN 172.16.16.1 172.16.16.5
ip http server
no ip http secure-server
dialer-list 1 protocol ip permit
control-plane
line con 0
exec-timeout 0 0
line aux 0
exec-timeout 0 0
password cisco
modem InOut
transport input all
stopbits 1
speed 38400
flowcontrol hardware
line 1/0 1/7
modem InOut
transport input all
stopbits 1
flowcontrol hardware
line vty 0 4
password cisco
scheduler allocate 20000 1000
2. With the above configuration, the router is not able to answer the incoming call from the PC.
3. And from the PC we are able to dial to a PSTN number at the router side, PC gives a proper dial tone and once the number is dialed, the call is landed on the other side (router end) and it rings continuously. But, the router does not answer this incoming. The analog line at the router end is terminated on async interface 1/0.
As I am new to dialup connectivity with NM-8AM, Could some please suggest the proper configuration in our router configuration OR Are missing any commands?
Any links/references would be of great help.
Thank you
PradeepHi,
I guess I'm having exactly the same setup. The integrated modem on the other end does pick up the call but soon disconnect after displaying "Waiting for carrier".
Any clue?
Thanks,
Eyad -
When I try to import a movie from finder, iMovie does not answer.
when I try to import a movie from finder, iMovie does not answer. The system will freeze and stay this way up to when I force imovie to stop. I cannot solve the problem myself. Any help? Thanks
the movies I tried tio import are .mpg and .avi
Imovie started to show this after I tried to import the movie from the finder, but from the camera it is OK.
I was makin a project movie with imovie when this happened.
from the console:
10/09/13 10:45:00,880 com.apple.launchd.peruser.501: ([0x0-0x90090].com.apple.iMovieApp[1163]) Exited: Terminated: 15
10/09/13 10:45:07,147 spindump: Saved hang report for iMovie version 9.0.9 (1795) to /Library/Logs/DiagnosticReports/iMovie_2013-09-10-104507_iMac-de-Michel.hang
10/09/13 10:45:30,880 com.apple.usbmuxd: stopping.
10/09/13 10:45:30,923 com.apple.usbmuxd: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit -
After registration of 6 divices/apps I bought two readers. Now I cant not use them because of no free license. What can I do? Adobe does not answer my questions.
Thanks too all the people who responded. . . . (noone)
Got it sorted though. Seems that Apple has issues with multiple apple id's.
Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
Even after that it was extremely hard to get my apps back on my PC.
If anyone else has the same problem. . . .email Apple. Cya. -
My router does not work with my computer but it works with my external driver. Also I have a PC conected to the router and it works...
My router does not work with my computer but it works with my external driver.
I don't understand the second part of that sentence.
As far as your computer is concerned,
1. Change the ethernet cable.
2. Open a browser on your Mac, and enter the router's ip - the manual will tell you what it is. Usually something like 192.168.1.1. You may have to wait for a response. If you do get a response. it will be a log-in window asking for a name and password. This info too should be in the manual.
3. Follow the instructions to set up your Mac to communicate with the router.
If this does not work, post back with a description of what happened. -
IPhoto8.1.2 does not answer
When I try to open my iPhoto, the page is blank and it keeps spinning. I have to force the program to close. It happened all of a sudden, and has been like this for a couple of days now. What can I do?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I bought a new IPad on Mrarch 29 in Atlanta, the following week when In Jacksonville, Florida owner to the St. Thomas store ther and request an exchange, the battery was never charged at 100%, and it was not lasting more than 6 hours. They exchanged the IPad . Last Friday I traveled back to Europe, and the iPad was lost, or stolen. I'm not sure if it was taken from my carry over or it dropped from the exterior pocket, that I found open. I do not have the serial number of the one that was given to me in Florida. I did try calling the store, but When requesting to talk to an specialist, no body answers the phone. what can I do to find the serial number?
YoldsThese links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Cheers, Tom -
Verizon does not answer customer service issues
I filed a customer service report two months ago, and received a response stating that the issue was indeed a Verizon error, however I have yet to hear a follow-up.
My issue is that the coverage map indicates I should have consistent voice and text service at my home address, however this is not the case. I have to drive more than a mile to make any calls and have my SMS inbox sync.
I’m sorry to hear about the service problems you are having at your home. As a consumer, I certainly understand wanting to go with a company that can provide service in your area. My name is Donna and let’s investigate this.
You are correct! I do show that our coverage map indicate that there should be signal in your area. Since there is not, I have taken the steps to open a trouble ticket with my Network Team to have them investigate this matter. Typically, the turn around time for a trouble ticket is 48-72 hours, so once a solution has been provided for this problem, you will hear back from me personally.
In addition, you should have received a separate email with the ticket number, but if you didn't, the ticket number is XXXXXXX.
I look forward to writing you with some good news, so we can retain your business.
I have been attempting to communicate with live support, who assured me that the ticket would be looked into and they would email me the status of the ticket. Another week has passed and still no followup by Verizon.
I can't not have service at my house, and Verizon has been entirely neglectful with handling this issue.
Note to moderator: If this discussion is deleted, I will be cancelling my service and will strongly dissuade others from using the service. Thanks.>Duplicate post deleted. Follow this posters thread at the following link:<
Phone is NOT delivered; my bill made it. (Imagine going to a restaurant not eating and being given a bill.)
Message was edited by: Verizon Moderator -
I have a new iPhone 5. Cannot get Siri to answer questions verbally. I only get a text response on screen - not a verbal response.
Have you reset the device? Hold power and home buttons until it shuts down, then power it up again.
-
I have a PowerBook G4 that I would like to use exclusively for my online banking. It may be infected with the Flashback malware virus. If I disable Java, will this effectively block the malware? Or must I completely remove the malware from my computer?
You need to remove the malware. Java is only used to inject the code.
I didn't think the flashback stuff was for G4's.
But if it was, first look in your ~/Library/LaunchAgents since that was one of the more common injection points (not the only one).
Look here for a cookbook of some other places to look. -
Download Link for HP Smart Web Printing does not answer
Since 4PM GMT + 1 on Thursday the 19. of November 2009
Any solution on the situation ?
Regards
Thomas
This question was solved.
View Solution.Thanks for your quick answert, I tried your link but to no previal, I sut sit and wait for the browser (IE & Firefox) to answer, the green line just runs slowly to the right, nothing else happens.
http://www.hp.com/global/us/en/consumer/digital_photography/free/software/smart-web-printing.html?ju...
I'm beginning to suspect my firewall/AV to play a rolle here, just down't know how wnad why.
Thomas -
There is an FAQ, "On how many computers can I install Final Cut Pro X?", but the answer doesn't really say. Is it 5?, 10? I read various interpretations elsewhere and am trying to find the correct answer.
ThanksThis is the language from the Software License. Full text available here.
http://www.apple.com/legal/sla/docs/FinalCutPro.pdf
to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
(ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library. -
I set FaceTime up under the wrong address. How can I change it to the correct one?
On the menubar, Facetime > Preferences > Account
Regards,
Captfred -
Mi iphone 3G tiene una falla en una linea de la pantalla multi tactil, esto hace que no responden algunas de las letras del teclado, necesito ayuda que puedo hacer?
Hola,
I don't think there's much you can do on your own, I think it needs repair & likely screen replacement. -
I've gone through the setup about a billion times (at least that's what it feels like) - but I've never been able to successfully have Exchange 2013 UM answer any phone calls to either the mailbox service or any configured auto-attendant.
To make sure I wasn't crazy, I have reinstalled Exchange 2010 in a 100% identical configuration, and she answers with absolutely no problems what-so-ever. Users are led to their mailbox, the autoattendent routes calls accordingly, etc.
. . . But moving back into a 2013 environment, in a 100% identical configuration, the server itself never actually answers any of the calls.
Would anybody happen to have any ideas on where I could go to check out the issues here?Thank you very much for the assistance. Here are the results of the testing:
//=======================================================
Test-UMConnectivity:
RunspaceId
: b4dc7de0-cac6-437b-bb5f-74a0b442c111
UmserverAcceptingCallAnsweringMessages : True
TotalQueuedMessages : 0
CurrCalls
: 0
Latency
: 1650.438
OutBoundSIPCallSuccess : True
UmIPAddress
: 10.0.2.199
EntireOperationSuccess : True
ReasonForFailure
Identity
: 25bbb3e9-909d-4e9d-b09e-edd65c9d1c6a
IsValid
: True
ObjectState : New
//=======================================================
Enable a UM Auto Attendant:
Yes - Already done. Double-checked just to be sure.
//=======================================================
User is UM Enabled:
***Username***
User mailbox
***@***.com
Title:
Office:
Work phone:
Phone and Voice Features
Unified Messaging: Enabled
Unfortunately, all the tests come back positive.
Maybe you are looking for
-
Overclocking ATI Radeon xpress 1270
Hi guys I have an msi notebook ER 710 with ATI RADEON XPRESS 1270 and i wonder if I can overclock the vga card. If any body knows how i can overclock it please give me some information and how can it be done? 10x
-
Where does iCloud put videos?
I have my phone set up to automatically sync over the air my photos and videos with my Mac. The photos show up in iPhoto but where do the videos go? They don't show up in iMovie. Is there some other place I should be looking?
-
I have a mystery comment bubble appearing on my PDF.
The document shows no comments but when i highlight fields the yellow box appears on the document saying 'marked set by (me)' - i click on it and i cant delete it, and it doesnt appear in the comment section on the left of the screen in edit mode. Wh
-
ABAP : Screen Painter - Graphical layout
Hi Experts , I am doing an assignment for the screen painter. but when i click on the layout of it , I am not getting the graphical input. kindly advise. is there some new setting to made. thanks & regards , M.S
-
Why does the iPad 2 not have Siri when the iPad mini does, and they both have a A5 chip