Switched computer cases and now I hang at the MSI splash screen.

Hey guys. I've never had any problems with building my PC until yesterday on the simplest of tasks.
I decided to buy a new case and switch everything over but when I did it decided to hang on the MSI motherboard splash screen.
Specs:
* MEM 4Gx2|G.SKILL F3-12800CL9D-8GBXL + one more stick.
* Processor = AMD Phenom II X6 1055T Thuban 2.8GHz Socket AM3 125W Six-Core Desktop Processor HDT55TFBGRBOX
* Graphics Card = HD 7950
* Motherboard = MB MSI| 880GM-E41 880G R
* PSU = CORSAIR CX series CX500 500W ATX12V v2.3 80 PLUS BRONZE Certified Active PFC Power Supply
* OS = Windows 7 64Bit
* No overclocking.
So far I've done the following. 
* Removed battery/Jumped the bios. 
* Checked and rechecked each RAM stick. 
* Removed all connections. 
* Removed graphics card etc. 
Any help would be greatly appreciated, Christmas has kind of killed my budget for a new build.
Thanks!
These are as far as I can get before everything stops working.

Really strange.
Have you made sure that there was will be/was no contact between mobo and case (apart from spots where the contact should be made) ? This could've break the motherboard.
Check ALL of the power supply cable connections between it and mobo.
Now something weird which doesn't seen to make any sense... Try to put your motherboard back to the old case.
That's all my suggestions, apart from that, if you're still able, then get it on a warranty and RMA it.
Good luck.

Similar Messages

  • I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

    I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

    Reinstall OS X:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Upgraded to osx lion via bootable USB stick but start up now just hangs on the grey apple screen

    Hi.  I've just recently upgraded from snow leopard to osx lion 10.7.3 on my laptop and it works perfectly! However I then tried installing on desktop and problems......
    1. I got the 'the error can't install message' so after researching' I made a bootable USB stick with lion on it.
    2. Installed on start up from bootable USB stick, no problems their.
    3. Restarted and it just hangs in the grey apple screen.
    I've reset the PRAM, started in safe mode, fixed disk permission etc, Even done this (http://hints.macworld.com/article.php?story=20070204093925888).
    I'm going to leave the grey screen over night to see if it does start up, but then we have the problem of an extremely slow start up.
    So.... I am posting this to find out if anyone else has this problem and fixed it without having to do a full clean install as some data like email lists etc I never backed up (I know stupid).
    Hope someone can help as i am lost on what else to try.
    HELP!?!?!?
    Dan.

    Update 01.03.12
    Computer is starting now but.... It takes 10 minutes and that is without my sound card, hardware and external hard drives plugged in, gonna test that now.
    Are their and fixes for slow start ups?
    Dan.

  • I restarted my macbook and now is stuck in the start up screen, what can I do?

    I restarted my macbook and now is stuck in the start up screen - grey screen, with apple logo and spinning wheel. It's a late 2008 model. Please help?!!

    Follow these directions:
    http://support.apple.com/kb/ts2570
    Ciao.

  • My mbp froze when I was trying to swipe to desktop. I did a manual restart and now it's on the apple loading screen for an hour. What should I do? :/

    It is still on the apple loading screen for an hour already. Does anybody. Know what I can do?

    Hold down the power button and restart whilst holding down the Command and R keys. This should take you to the Recovery partition. Use Disk Utility to both verify and repair permissions and your hard drive (if needed). See if this will get you started again.
    Clinton

  • I just restarted my phone, and now its frozen on the apple logo screen it shows when it restarts! anyone know how to get it to work?

    My phone is frozen on the apple logo screen that shows when restarting. I tried to restart it again, but it still freezes and stays on that screen . I really dont want to reformat! Does anyone have any idea how to fix it?  THANKS!

    You have to put it in dfu mode, when its plugged into itunes reset it by holding the home and the power button, when it starts back up let go of the power button and just hold the home button it should find your phone and say its in restore mode. from there you just have to restore it

  • Hi, I reset my iphone 3G and now its stuck on the apple logo screen. Ive tried doing quick restore. Any ideas would be appreciated.

    Hi, reset my

    Apple considers jailbreak a violation of terms of use.  Doing it voids your warranty with Apple and you give up your right to support from this forum.

  • Switched startup disc and now can't start...

    i tried to boot up from an old disc warrior cd, and couldn't. i switched the startup disk in sys pref, and now can't start the computer at all (i keep getting the message "you need to restart your computer...") now i know i need a new version of DW, but how do i start up from my hard drive??
    Thanks.

    Here's something that should work:
    Restart the computer in single-user mode by pressing and holding down COMMAND-S immediately after the chime until the computer starts to a black screen with white print. At the prompt enter the following commands pressing return after each:
    prompt> /bin/df
    (to get the /dev name of the drive)
    prompt> /usr/bin/hdiutil eject -force /dev/drivename
    (where you got drivename from df)
    If you are successful you can restart the computer by entering "reboot" at the prompt (without the quotes) and pressing return.
    If you are not comfortable using the command line you can also eject the disk manually by inserting a straightened large paperclip into the small eject hole located on the side of the optical drive slot.

  • Own OSX 10.6.8 Snow Leopard. MSOffice 2004 was taken out because of computer repair and now can't find disc to reinstall. But WANT the Office 2004, not Office 2011. Where can I find one and are all Officew 2004 the same

    I own a OSX 10.6.8. IMAC with Snow Leopard. my MSWORD Office 2004 was taken off when computer was repaired and now can't find the disc to reinstall. Do not want the Office2011.. Where do I find the Office 2004 and are all Office 2004 choices the smae.

    Hi Martha - Amazon offers office 2004 on their website.
    http://www.amazon.com/Microsoft-Office-2004-Standard-VERSION/dp/B0001WN0M2
    That will be your best bet if you want to have office 2004 on your computer. Also, there are some different versions want to come to office. The link above gives you the standard version, but there's also the professional version. Now it sounds like that you do not want to upgrade to the latest office because you're most likely comfortable with how 2004 works. So in that case I would not spend the extra money and pay for the professional version unless you really need it. I see on the website there that if you buy a used copy it will only cost you around $10.
    Hope this helps!

  • I recently upgraded toSnow Leopard, after that I was given a continual message that I had to reinstall my Internet Cleanup. So I did. Then I turned my computer off and now it will not turn on at all. Help!

    I recently upgraded toSnow Leopard, after that I was given a continual message that I had to reinstall my Internet Cleanup. So I did. Then I turned my computer off and now it will not turn on at all. Help!

    See if your Mac will boot from the install DVD.
    Then uninstall Internet Cleanup.
    Allan

  • I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos?

    I just updated my iTunes, and I need to delete photos from my iPod 4, and there is a Photo Library that synced to my iPod when i plugged it into my computer, and now it doesnt have the option to delete them off my iPod. How do I get rid of these photos? I have read other questions that say to plug the iPod into the computer and like un-sync it, but I downloaded the new iTunes and it doesnt have a photos tab. Does anyone know how to solve my problem? Please and Thank You, Megan!

    Just what did you do to the computer?
    It sounds like the iPodf is seening the iTunes libary as a new libary.

  • HT1459 I have burned numerous cd's onto my old computer.  Many of these songs cannot be purchased on Itunes (Garth Brooks for example).  My old computer died and now I can't transfer these songs from my ipod onto my new computer.  How can I retreive my da

    I have burned numerous cd's onto my old computer.  Many of these songs cannot be purchased on Itunes (Garth Brooks for example).  My old computer died and now I can't transfer these songs from my ipod onto my new computer.  How can I retreive my data?

    What options do you have enabled from under your iPod's Summary and Music tabs for syncing preferences?
    B-rock

  • I previously had itunes on my computer uninstalled and now I want to reinstall but it won't install it keeps trying to install to a J drive? instead of the C drive

    I previously had itunes on my computer uninstalled and now I want to reinstall it on my computer now and it keeps trying to install to a J drive instead of the C drive I have plenty of room on my computer but not on this "J" drive how can I change where it installs I tried to click change before it installed and it would not let me.

    See the further information area of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Had to restore my computer and now have music on the iPad that I would like to transfer back to the computer. How do I do this?

    Had to restore my computer and now have music on the iPad that I would like to transfer back to the computer. How do I do this? (Operating system is Windows Vista)

    This depends, if the music was purchased on the iTunes store you can transfer purchases. If it was not then you would need a 3rd party program in order to rip these files to the computer.

  • I installed Adobe Photoshop Elements 11 in my computer before. Right now I'm not using that computer anymore and want to re-install the software to a new computer. I still have the redemption code. Can you please provide me the download link or which ever

    I installed Adobe Photoshop Elements 11 in my computer before. Right now I'm not using that computer anymore and want to re-install the software to a new computer. I still have the redemption code. Can you please provide me the download link or which ever way I can re-install the software to the new computer? Thank you.

    Hi,
    Please go to the link below to download Photoshop elements 11
    http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    To get your serial number from redemption code click on the link below
    https://redeem.licenses.adobe.com/getserial/s/redeem
    Thank you,
    Mohd. Naseem

Maybe you are looking for

  • My iPhone 3GS & iPad 4 wont connect to my Macbook

    Hello, my name is Dave. I have two problems with Apple products. I've been trying to upload music to my iPhone 3GS and iPad from my Macbook.      - iPhone 3GS problem           I have a 32GB iPhone 3GS with 6.1.6. I want to upload music to my phone,

  • How to working with BI in Visual Composer 7.1

    Hi. I want to work with BeX Query using Visual Composer 7.1 I created BI system in EP System configuration. http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm http://help.sap.com/saphelp_nwce10/helpdata/en/4

  • Synch bombs WinXP  Pro SP2 on two different iPods

    OK, here's my issue and I haven't seen anyone report anything quite like it. I have two different iPods: a 60GB and a very new 160 GB Classic. Both "fail" synch test in iTunes but the test output is not helpful in explaining "why." I have about 40 GB

  • 135k only + speedtester can't complete test

    Our line has dropped to 135k as a result of a faulty extension. That was over a week ago and the line is still at the slow speed. (Hub 2.0 connected to main socket since then) I've tried to run the speed test a few times but it can't complete the tes

  • Can't use mouse cursor to select windows buttons from XFCE panel

    The problem is weird but the behaviour is as follow: let say I have sultiple copies of the same software (Firefox, for instance) or when the software has multiple windows (for example Pidgin main windows and its other chat windows). Wwhen I try to cl