Switched computers, iTunes not recognizing songs for sync. HELP!

So my mother has been consolidating content from her older laptop on to her newer desktop. Today she decided to do iTunes while I was at work. From what she told me, she uninstalled iTunes off of her laptop (which was where she was buying/syncing/etc.) and then installed iTunes in to the desktop and plugged it in. She's got a decent sized library (200-300) songs, but now every time it syncs, it only syncs 3 songs, which she said were either bought or listened to today. When you click on "iPod" in iTunes when it's plugged in, and go to "Music", the checkbox next to "Sync all Music" is checked, but in parenthesis it says "3 songs". If you go to her library, all of her 200+ songs are there and can be listened to, but the syncing process won't recognize them.
Didn't know if anyone here has had this issue and could be of help. I usually just google search this crap, but didn't know how to consolidate everything from the first paragraph in to a short google search. So if anyone can lend any help, it'd be much appreciated. Thanks in advance.

Resolved. She uninstalled and reinstalled iTunes this morning before I woke up and apparently she was then able to get all of her music. I'm guessing there was a question she answered wrongly when first plugging the iPod in to the new desktop that screwed it up, but uninstalling and reinstalling the program "reset" it.

Similar Messages

  • Downloading songs from two different computers, and not recognizing songs

    On my home computer, I downloaded about 40 songs onto my IPod from CDs. Then, I installed the program on my work computer, and purchased four songs from ITunes. When I plug my IPod into my work computer, it is not recognizing the songs I downloaded from my home computer. However, if I plug my IPod into my work computer, I can listen to these four purchased songs, but once I try to listen to them without having it plugged into my work computer, only the songs I downloaded from home are on the IPod.
    Has this happened to anyone else who has tried to put songs from two different computers onto their IPod?

    Just to elaborate a bit, you need to copy the purchased files and put them on your home computer.
    Don't burn them as an audio CD as you will lose quality when you re-import them.
    You can use the Shuffle (instead of a CD) to do this
    Check out this link.
    http://docs.info.apple.com/article.html?artnum=61131

  • Itunes not recognizing songs in Media Folder

    I have my Itunes Media Folder on an external HD.
    When I try to play some tracks in Itunes, they have the ( ! ) next to them. A dialogue comes up that says Itunes can't find them.
    But I know they're right there on the external drive.
    When I choose "locate" I can easily find them.
    But Itunes cannot.
    Help. Thanks!!!

    It's very connected. And Itunes>preferences>advanced shows the drive and media folder.
    I can play the tracks from the drive, in the finder.
    Drive has same name as always, and folder structure is same as always. thanks. what could it be?

  • ITunes not recognizing my ipod need help plz

    when i hook my ipod into my computer, the computer recognizes that my ipod is there. it makes the ding sound that windows makes when u add or remove hardware and the ipod shows up in my computer. When i go to update it with itunes 7 though, itunes does not seem to know that my ipod is there. it shows no signs of recognizing my ipod. what can i do to fix this?

    Sounds like windows confusing the ipod as a network drive try the steps here http://docs.info.apple.com/article.html?artnum=93499

  • When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync my ipod. Has anyone had a problem with itunes not recognizing an ipod?

    When I plug in my ipod to my laptop instead of my desktop, nothing pops up to sync it. Has anone had any problems with itunes not recognizing an ipod?

    Hi sarahdavis0_o,
    Welcome to the Apple Support Communities!
    If neither your iPod or iPhone are being recognized by iTunes when connected, I would recommend the steps in the following article.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Have a great day,
    Joe

  • Solution!!! (for iTunes not recognizing Nano)

    I've written this as a reply to the thread below as well - but as it seems more than just our friend below has this problem I've also posted this as a separate post
    Hi everybody,
    I have - like many of you, suffered through this frustrating process of Windows recognizing the Nano and yet iTunes not recognizing it, and after some research I think I may have found a solution (perhaps not THE solution).
    Just so you are aware, I just want to warn you that I'm not some computer science expert or anything, and this is a pretty old article (written May 2006, http://pluralsight.com/blogs/keith/archive/2006/05/26/25476.aspx), BUT I think this works on iTunes 7.0 because it is now detecting my nano. Basically I think what the problem is that the Nano is supposed to be formatted as FAT32 to work with iTunes but for many of us outdated Nano users the Nano is still formatted as FAT.
    So like the blog author has written, we need to go and run the Windows disk management tool (if you are not a computer person like I really am not, just go to Windows help and search "disk management" and it'll give you a link that brings you directly there). The disk management tool will probably show the C drive and then the iPod as well as any extraneous hardware. RIGHT CLICK on the iPod (it should be there since all of you are saying that XP recognizes it), format it to FAT32 (it will warn you that info on your ipod may be erased, but this doesn't matter since it's just info on your ipod and your music is on your C drive anyway). I didn't re-run the iPod updater like the blogger did (especially since the iPod updater is apparently included in iTunes 7.0 now and the latest one, which I believe is iPod updater 6-28-06..is now outdated and invalid)...but the next time I ran iTunes, it recognized the iPod!!!!!! HORRAY
    So in simple instruction form,
    - Open Windows disk management window (Control Panel --> Administrative Tools --> Computer Management)
    - Once you have this window open, click on Disk Management (under Storage)
    - If like you say, your XP recognizes your iPod (but iTunes doesn't), then your iPod should be listed under that window along with your C drive (and maybe others). Under File System, it might say FAT.
    - If it does, RIGHT CLICK your iPOD and choose Format
    - Change the Format from FAT to FAT32. (It will warn you that everything will be erased but that's ok)
    Btw I also restored the nano (to factory settings).
    I hope this helps...was glad to find there were other people suffering through the same thing. Misery loves company! Please let me know if it worked for you and if you have questions

    I too am a victim of upgrading to iTunes 7.0 I reformatted my nano per instructions, even though it already was FAT32. I reset the nano as well, still no joy. What's interesting is that if I restart the computer with the nano plugged in, it recognizes it and tells me that I need to update to 1.2. As soon as I do this, however, it says that it's updating, but the ipod goes from 'do not disconnect' to the normal menu. iTunes says it’s updating, but it never does. I need to kill the process through task manager to get it to quit.
    Additionally, if I choose not to update, the nano shows up in iTunes just fine and I can move songs to the nano. (I have it set to manually update the nano as I have more songs in my library than the nano can hold.)
    However, as soon as I ‘eject’ the nano, reconnecting it does not show the nano, whether I stay in iTunes or close iTunes and then unplug and plug in the nano. The nano shows ‘do not disconnect’, and windows sees the nano, but still no joy in iTunes.
    FYI, I have also uninstalled and reinstalled the software and tried all the directions at:
    http://docs.info.apple.com/article.html?artnum=93716
    Which I was directed to when doing the diagnostics on the iPod through iTunes.
    This is a total crock. Some upgrade.

  • ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, NOT ABLE TO SYNC

    Hi Everyone, just noticed an anomaly with my devices
    ITUNES NOT RECOGNIZING IPHONE 4S DEVICE, AND NOT ABLE TO SYNC. ANY IDEAS WOULD BE HELPFUL, THANKS

    Open Device Manager and Right click Apple Mobile Device and choose Update Driver
    Select BROWSE My Computer For Driver Software
    Select Let me pick from a list of Device Drivers on my Computer
    Click Have Disk button---NOTE if the have disk option is not available. Choose a device category
    such as mobile phone or storage device if listed then Click Next the have disk button should appear.
    Click the Browse button and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    Double click the "usbaapl" file or "usbaapl64" or if there is no driver folder look in
    C:\program Files (X86)\ Common Files\Apple\Mobile Device Support\Drivers. instead
    Click open in Have Disk Window  Then Click NEXT and then FINISH Windows will install the Drivers
    GOT THIS FIX FROM AN EARLIER POST BY J F FOURIE and it worked for me
    Hope this helps

  • I'm in the process of switching computers. Is it necessary for me to back up my itunes music library somehow, or will my library come up when I install itunes on my new computer?

    I'm in the process of switching computers. Is it necessary for me to back my itunes music, or will my library come up when I install itunes on my new computer?

    Hello,
    I would recommend taking a look at the article below for more information about migrating your iTunes library.
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1364
    -Griff W.

  • ITunes Not Recognizing/Reading iPod

    Hello!
    I've recently had trouble with iTunes not recognizing/reading my iPod. I've plugged it in, but iTunes fails to recognize that it's been plugged in. It does charge, but that's it. I've been trying to sync my iPod, but I'm now unable to. This problem only began a few weeks ago, rather suddenly, and has not yet worked since then. I'm hoping I don't have reinstall iTunes, as I've purchased some new songs and those are what I'm trying to copy over, and I don't wish to lose those.
    I'm currently running Windows Vista, and I'm not sure which versions of iTunes I'm using. I know I was using 7 at some point, but I don't remember if I've updated beyond that. I'm also using a 2nd Generation iPod Nano.
    Any suggestions as to why this is happening and/or what I can do to fix it will be eagerly waited for!
    Thank you.

    Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem. Here are various ‘generic’ solutions that you can try in an effort to correct your problem. One should work. These are listed in simplest to more involved order (usually). Read through them all, and see if one specifically matches your observed issue(s).
    First, make sure that the iPod is fully charged.
    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. However, it may take several attempts.
    Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
    Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
    Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
    Your iPod may be conflicting with other USB peripherals or network drives. If your iPod shows up in Explorer under 'my computer' try changing the drive letter:
    -- Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
    -- Right-Click on the iPod and select “change drive letter”
    -- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
    -- Safely eject the iPod
    -- Reboot the PC
    -- Open iTunes &/or Connect the iPod
    If you do find that your Device Manager is blank, you should probably check up on this issue first: No Items Appear in the Device Manager List When You Open It
    If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
    Your PC may have difficulty with the USB2 protocol and the iPod. See this Article for a possible solution: iPod not Recognized Correctly
    Also try these hints (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
    Try using another PC if you have access to one. Even a Mac may help. Try Restoring it on the other computer and moving it back to yours.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes
    “Strange iPod Behavior within Windows”

  • ITunes not recognizing iPhone 5 iO7 on Windows 7

    I have exhausted myself dealing with this problem. My iTunes will not recognize my iPhone 5. I am running Windows 7 64 bit and my computer recognizes the phone when i plug it in, however, my iTunes does not so I am not able to sync any music. I have tried practically everything I have found on the internet to fix this problem and even the people at the Apple store could not help me with my problem. I have uninstalled and installed all Apple related programs, I have insured that the Apple Mobile Device USB Driver is working correctly but nothing seems to fix the problem. I just don't know what to do anymore because nothing seems to work. I have followed the suggestions contained in the following discussions but nothing seems to work. Thank you for your help.
    Referenced discussions:
    https://discussions.apple.com/thread/3121604?start=0&tstart=0
    http://support.apple.com/kb/ts1538

    golds04
    Re: iTunes not recognizing iPhone 5 
    Feb 16, 2014 7:45 AM (in response to oryyx)
    Had this problem this morning.
    Once in the past had to erase my iphone and reload it.That was unpleasant.
    This morning had the problem,too.
    Plugged in my iphone directly into the Imac (not hub) then clicked shut down on the imac.
    Pressed the button in the back while the iphone was still plugged in-and when rebooted iphone was visable in itunes.
    Hope this helps.
    Thanks so much for your suggestion. I'm using a MacBook Air and I just tried this with my laptop - shutting down the computer all the say (not restarting it) and then booting it back up with the phone plugged in. It didn't work but it was worth a shot! Thank you!
    Jen912 wrote:
    I had this exact same problem and just figured out how to fix it. I had to reload the driver on the iphone5 in order for itunes to recognize the device. Follow the steps here to see if you might need to do the same thing. Once I reinstalled the driver, everything works fine and I'm now able to sync with itunes again.
    http://support.apple.com/kb/TS1538
    Thanks for the suggestion, I have seen a TON of posts like mine where this is the solution. Unfortunately, I am on a Mac not Windows so the driver isn't the problem.

  • Itunes not recognizing 1st gen nano?

    itunes not recognizing 1st gen nano?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4. Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • ITunes Not Recognizing my iPod Touch after Upgrading from Tiger to Leopard

    After upgrading from Tiger (10.4.x) to Leopard (10.5.0=>10.5.6), my iPod Touch is no longer recognized by iTunes 8.0.2. The iPod Touch no longer appears in iTunes' "source list" (left side pane in iTunes' GUI).
    Immediately prior to that upgrade, my iPod Touch was working great with Tiger (10.4.x). iTunes 8.0.2 recognized it (listed it in sources) and always synchronized with it successfully.''
    My iPod Touch is also not shown in the Finder. However, it does show up as recognized in iPhoto.
    Any ideas on how to get the iPod recognized again in iTunes under Leopard?

    Thanks to a posting by Jim in a different Apple Discussions (forum), my problem is now resolved. Read on for the details.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Jim's posting set me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to Jim's posting, I had already read the article that Jim referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to Jim's posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • ITunes not recognizing original IPod touch after new one installed

    I tried to set up new IPod touch but itunes wouldn't recognize it. Downloaded latest version of itunes. Was able to set up new IPod touch but now old touch not being recognized by itunes. Went through the troubleshooting guide with no positive results. Old (unreconized) touch is fully charged. Restarted computer. Restarted itunes. Changes usb ports. Nothing working. Any ideas?

    Hi Jim,
    Thank you for your reply to my posting about iTunes not recognizing my iPod Touch after upgrading to Leopard.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Thanks for setting me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to your posting, I had already read the article you referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to your posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent you referenced was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

  • TS1410 i can't see the songs in my  iTunes. These songs were synced from my iPod classic.

    I can't see the songs in my  iTunes. These songs were synced from my iPod classic before the i tunes updates.

    I would suggest as this is not Apple software you are using, you might want to look here.
    ephpod support.

  • Itunes not recognizing my ipod after restoring it

    My ipod decided to go crazy on me, so I followed the 5 r's. After restoring the ipod it is no longer being recognized. I have restarted my computer, downloaded the latest software, used different usb ports but to no avail.
    There is no icon in devices that pops up. When i run a diagnostic is states that an ipod is connected.
    Any helps?

    Hi Jim,
    Thank you for your reply to my posting about iTunes not recognizing my iPod Touch after upgrading to Leopard.
    iPods & Finder. Some other postings incorrectly lead me to believe that the iPod would show up in the "Finder". Thanks for setting me straight on this.
    iTunes Not Recognizing iPod Touch. Prior to your posting, I had already read the article you referenced (to remove and reinstall the Apple Mobile Device Service per article "http://support.apple.com/kb/HT1747").
    Prior to your posting, I had also read other articles in various "Apple Discussions" (forums) that suggested this recognition problem could be resolved by uninstalling/re-installing iTunes 8.0.2. Some implied that you could just re-install iTunes 8.0.2 right over the currently installed one without bothering to uninstall it.
    Based on those postings, I "gambled" last night and simply downloaded and re-installed iTunes 8.0.2 (without uninstalling it first). I noticed during the installation that the Apple Mobile Device agent you referenced was also re-installed. Well, my gamble paid off! After the installation (and a reboot?), iTunes onces again RECOGNIZED my iPod Touch.

Maybe you are looking for

  • Hi, why can´t I see my transparent basic vector after saved?

    Let´s say I draw a circle with the vector tool, stroke 3, white, transparent background, all good until I save. I save as gif or png. If I upload to the website the background is not transparent. It is white. But when I bring a bitmap, edit and save

  • Is my Hard Disk about to fail?

    I am scared that there is something seriously wrong with my Hard disk or something because the following keeps happening: I was trying to get a picture from my pictures folder to show on my wife's Desktop (same Mac). I copied the .jpg file to the sha

  • Certain website items are not loading in firefox. could be a javascript issue?

    i am not able to click on certain links on websites. expedia.com is one of them. if i search for a flight it comes up with a few flights but when i click on one to see more information it doesnt go anywhere. also if i try to change the date via the c

  • Populating of the data automatically from one jpanel to other jpanel

    Two different panels are there,for suppose if i give customer id in one panel it should automatically populate or display customer name in a textfield which is present in other panel. This can be done using database easily,but i wanted to know how it

  • Displaying errors of idocs in a report

    i want to display errors of idoc along with the status in a report. can any suggest me the correct method?