Switched Data Pkg. and data not working.

I upgraded my data package yesterday from 5GB to 4GB with a mobile hotspot and we are shortly into the billing period but my data is still not working. Right when I selected accept to make the switch final, I got a text message that said I had used my data allowance for the month which it previously said 1.2. What do I do?

Can i suggest using a slightly different color that fluorescent Pink is a bit to much to read: Back to your Question it has been that some has had the Same issue your Describing when you Got to 2GB of data your Connection Probably dropped and as you say your getting what's on the Screen So this is what i would Suggest.
Do a Soft Reset So you can Get your phone Back to the Main Screen and From there i Wold Do a Factory Reset As one said that even thought the Set Mobile Data Limit is Unchecked it Still can cause the Issue. And i had a Rep that i Know that was using a Razr Maxx had the Issue Here and He Done the F.R. And it Took Care of the issue. So you might Give this a Try And i was just given you a hard time on the Colors it's not that bad once i got use to it. Welcome to the Forum b33

Similar Messages

FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow.

FireFox auto updated to 6.0 this weekend and has not worked properly since. I have uninstalled and reinstalled. Made sure all windows componets were up to date and still no joy. Any idea? Windows 7, 64 bit, normal configfuration. It is extreamly slow and never finishes loading ANY page.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

If you have iOS 5 installed on it, you don't need a PC. simply turn it on and set it up.
if you don't have iOS 5 then you'll need a computer.

HT6162 Hi i tride to up date my phone and did not work can i get some help to try again please and thank you, Debra Walker

Hi I tride to up dat my phone did not work.

Hello Litlemelt,
Thank you for the details of the issue you are experiencing when trying to update your iPhone. I recommend reviewing the following article:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Thank you for using Apple Support Communities.
Best,
Sheila M.

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

[svn] 4377: Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey

Revision: 4377 Author: [email protected] Date: 2008-12-22 16:16:25 -0800 (Mon, 22 Dec 2008) Log Message: ----------- Bug: BLZ-292 - Data Push sample does not work in BlazeDS Turnkey QA: Yes Doc: No Checkintests Pass: Yes Details: * Regression due to some refactoring of user-agent handling that was failing to set up defaults if no explicit <properties> were defined for the <channel-definition>. This meant that for IE, no kick-start bytes were being pushed down the streaming connection at setup time... Ticket Links: ------------ http://bugs.adobe.com/jira/browse/BLZ-292 Modified Paths: -------------- blazeds/trunk/modules/core/src/flex/messaging/endpoints/BasePollingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseStreamingHTTPEndpoint.java blazeds/trunk/modules/core/src/flex/messaging/util/UserAgentManager.java

Hi,
Thanks for your feedback!
This feature has been going through a lot of changes with the BlazeDS and Flash Builder builds.
We request you to pick up the BETA2 build of Flash Builder and BlazeDS 4.0.0.10654, hopefully you should see things working fine.
Kindly let us know if you still encounter problems.
Thanks,
Balaji
http://balajisridhar.wordpress.com

Hey, I wanna download Lion for free, so i need UP-TO-DATE , but it do not works , please help

Hey, I wanna download Lion for free, so i need UP-TO-DATE , but it do not works , please help

I think you misunderstood the guy. The up-to-date program isn't working for a lot of people. I'm eligible for the free upgrade but it fails to recognise my serial. From what I've read, this is affecting a lot of people who purchased their computers online. Apple seems to be fixing the issue though, so my advice would be to keep trying. Alternatively, click on the manual verificaton link so they can check your order for you and send the redemption code after they do.

I have had my Iphone 5s for 2 months and all the fotos and data (fotos and data were not backed up) that I had were erased after I restored it with my old Iphone 4s backup, can I get my unsaved fotos and data back? and if I can, how?

I have had my Iphone 5s for 2 months and all the fotos and data (fotos and data were not backed up) that I had were erased after I restored it with my old Iphone 4s backup, can I get my unsaved fotos and data back? and if I can, how?

If you never backed up your phone to iTunes and never backed it up to iCloud all of your content is gone forever.

When I receive e-mails w/ attachments in PDF they show up as win.dat attachments and will not open w/ Acrobat

When I receive e-mails in Mail w/ PDF attachments they appear as win.dat attachments and will not open w/ Acobat Reader or Professional.

Search....
http://lmgtfy.com/?q=winmail.dat+mac

Difference b/w DATA TYPE and DATA OBJECT & differences b/w TYPE and LIKE

hai
can any one say the differences between Data type and Data Object.
And also differences between TYPE and LIKE
thanks
Gani

hi,
_Data Types and Data Objects_
      Programs work with local program data that is, with byte sequences in the working memory. Byte sequences that belong together are called fields and are characterized by a length, an identity (name), and as a further attribute by a data type. All programming languages have a concept that describes how the contents of a field are interpreted according to the data type.
      In the ABAP type concept, fields are called data objects. Each data object is thus an instance of an abstract data type. There are separate name spaces for data objects and data types. This means that a name can be the name of a data object as well as the name of a data type simultaneously.
Data Types
   As well as occurring as attributes of a data object, data types can also be defined independently. You can then use them later on in conjunction with a data object. The definition of a user-defined data type is based on a set of predefined elementary data types. You can define data types either locally in the declaration part of a program using the TYPESstatement) or globally in the ABAP Dictionary. You can use your own data types to declare data objects or to check the types of parameters in generic operations.
     All programming languages distinguish between various types of data with various uses, such as .. type data for storing or displaying values and numerical data for calculations. The attributes in question are described using data types. You can define, for example, how data is stored in the repository, and how the ABAP statements work with the data.
Data types can be divided into elementary, reference, and complex types.
a. Elementary Types
These are data types of fixed or variable length that are not made up of other types.
The difference between variable length data types and fixed length data types is that the length and the memory space required by data objects of variable length data types can change dynamically during runtime, and that these data types cannot be defined irreversibly while the data object is being declared.
Predefined and User-Defined Elementary Data Types
You can also define your own elementary data types in ABAP using the TYPES statement. You base these on the predefined data types. This determines all of the technical attributes of the new data type. For example, you could define a data type P_2 with two decimal places, based on the predefined data type P. You could then use this new type in your data declarations.
b. Reference Types
Reference types are deep data types that describe reference variables, that is, data objects that contain references. A reference variable can be defined as a component of a complex data object such as a structure or internal table as well as a single field.
c. Complex Data Types
Complex data types are made up of other data types. A distinction is made here between structured types and table types.
Data Objects
      Data objects are the physical units with which ABAP statements work at runtime. The contents of a data object occupy memory space in the program. ABAP statements access these contents by addressing the name of the data object and interpret them according to the data type.. For example, statements can write the contents of data objects in lists or in the database, they can pass them to and receive them from routines, they can change them by assigning new values, and they can compare them in logical expressions.
       Each ABAP data object has a set of technical attributes, which are fully defined at all times when an ABAP program is running (field length, number of decimal places, and data type). You declare data objects either statically in the declaration part of an ABAP program (the most important statement for this is DATA), or dynamically at runtime (for example, when you call procedures). As well as fields in the memory area of the program, the program also treats literals like data objects.
        A data object is a part of the repository whose content can be addressed and interpreted by the program. All data objects must be declared in the ABAP program and are not persistent, meaning that they only exist while the program is being executed. Before you can process persistent data (such as data from a database table or from a sequential file), you must read it into data objects first. Conversely, if you want to retain the contents of a data object beyond the end of the program, you must save it in a persistent form.
Declaring Data Objects
      Apart from the interface parameters of procedures, you declare all of the data objects in an ABAP program or procedure in its declaration part. These declarative statements establish the data type of the object, along with any missing technical attributes. This takes place before the program is actually executed. The technical attributes can then be queried while the program is running.
     The interface parameters of procedures are generated as local data objects, but only when the procedure is actually called. You can define the technical attributes of the interface parameters in the procedure itself. If you do not, they adopt the attributes of the parameters from which they receive their values.
ABAP contains the following kinds of data objects:
a. Literals
Literals are not created by declarative statements. Instead, they exist in the program source code. Like all data objects, they have fixed technical attributes (field length, number of decimal places, data type), but no name. They are therefore referred to as unnamed data objects.
b. Named Data Objects
Data objects that have a name that you can use to address the ABAP program are known as named objects. These can be objects of various types, including text symbols, variables and constants.
Text symbols are pointers to texts in the text pool of the ABAP program. When the program starts, the corresponding data objects are generated from the texts stored in the text pool. They can be addressed using the name of the text symbol.
Variables are data objects whose contents can be changed using ABAP statements. You declare variables using the DATA, CLASS-DATA, STATICS, PARAMETERS, SELECT-OPTIONS, and RANGESstatements.
Constants are data objects whose contents cannot be changed. You declare constants using the CONSTANTSstatement.
c. Anonymous Data Objects
Data objects that cannot be addressed using a name are known as anonymous data objects. They are created using the CREATE DATAstatement and can be addressed using reference variables.
d. System-Defined Data Objects
System-defined data objects do not have to be declared explicitly - they are always available at runtime.
e. Interface Work Areas
Interface work areas are special variables that serve as interfaces between programs, screens, and logical databases. You declare interface work areas using the TABLES and NODESstatements.
What is the difference between Type and Like?
Answer1:
TYPE, you assign datatype directly to the data object while declaring.
LIKE,you assign the datatype of another object to the declaring data object. The datatype is referenced indirectly.
Answer2:
Type is a keyword used to refer to a data type whereas Like is a keyword used to copy the existing properties of already existing data object.
Answer3:
type refers the existing data type
like refers the existing data object
reward if useful
thanks and regards
suma sailaja pvn

Data Integrator and Data Quality

Hi,
I worked on BI 7.0 and now exploring Business objects. I wanted to know how Data Integrator and Data Quality products relate to SAP BI 7. What is the purpose of using them. Is this integration and quality features not embedded in SAP BI 7.

BI and Data Services share many integration features, but Data Service provides better connectivity to third party data sources. The data quality features of Data Services are not available in BI.

Is there a way to manually custom-edit the "Date created" and "Date modified" attributes of files in Mac OS 10.6?

In "List View" in a Finder window, among the many column options are "Date created" and "Date modified." In "View Options" (command-J) for any folder, one can add these columns, along with the standard ones "Size," "Kind," "Label," etc.
A user can alter a file's name, and a file's "label" (i.e. its color). On the other hand, a user can NOT arbitrarily edit/alter a file's official "size" -- other than by physically altering the contents of the file itself, obviously.
But what about a file's "Date created" and "Date modified"? Can either of those be manually edited/changed, just as a file's name can be changed -- or is a file's creation-date an immutable attribute beyond the editorial reach of the user, just as a file's "size" is?
And yes, a person can "alter" a file's "Date modified" by simply modifying the file, which would change its "Date modified" to be the moment it was last altered (i.e. right now). But (and here's the key question) can a user somehow get inside a file's defining attributes and arbitrarily change a file's modification date to be at any desired point in the past that's AFTER its creation date and BEFORE the present moment? Or will so doing cause the operating system to blow a gasket?
If it is possible to arbitrarily manually alter a file's creation date or modification date, how would it be done (in 10.6)? And if it is NOT possible, then why not?

sanjempet --
Whew, that's a relief!
But as for your workaround solution: All it will achieve is altering the created and modified dates to RIGHT NOW. What I'm looking to do is to alter the modification/creation dates to some point in the past.
I'm not doing this for any nefarious reason. I just like to organize my work files chronologically according to when each project was initiated, but sometimes I forget to gather the disparate documents all into one folder right at the beginning, and as a result, sometimes after I finish a job, I will create a new folder to permanently house all the files in an old project, and when that folder is places in a bigger "completed projects" folder and then is organized by "Date created" or "Date modified" in list view, it is out-of-order chronologically because the creation and modification dates of that particular project folder reflect when the folder was created (i.e. today), and not when the files inside the folder were created (i.e. weeks or months ago).
The simplest solution would simply to be able to back-date the folder's creation or modification date to match the date that the project actually started!

TS1702 I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!

I just bought a new iphone 5S and once turned on and pushed the button restore from Icloud, I'm stil stuck in this section i can't do anything plus i turned it off and on again and still not working, please provide me with a solution very urgently!!
Kindly note also that i did not work on this iphone before, i just turned it on and i cannot connect it to the itune and restore it as the itune cannot read the device since i'm not able to reach my home screen, I am stuck in my restoring screen.
Please help!!!!

You dont have any data on your phone yet right?
If you dont connect your device to the computer and
Press and hold the Sleep/Wake button and the Home button together for at least 15 seconds, until the Apple logo appears.
after that click okay when it says itunes has detected an iphone in recovery mode. Then click restore
after that try again

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!

An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support

Switched Data Pkg. and data not working.

Similar Messages

Maybe you are looking for