Switched from lxde to e17 now Deluge won't work?

Hi all,
I've been playing with different Windows Managers and a few Desktop Managers lately.
Today I installed e17 from a fully working lxde setup and now deluge won't load.
I installed e17 as suggested in the wiki:
pacman -S e17-svn desktop-file-utils e17-extra-svn
I still haven't removed lxde, I just edited my .xinitrc.
I've tried selecting deluge from the application menu and nothing happens.
I've tried running it (as user) from the terminal and all it does is spit that python2.6 deprecation warning before going back to a blinking cursor.
I've tried running it via sudo (and gksu) and it spits out the same error as above but never progresses to the blinking cursor.
I've tried opening a root shell (via su) and get the same as above.
I've tried reinstalling deluge, no change.
I've only been playing with enlightenment for a few hours now, any ideas?
edit:
Oh, I've also replaced the default file manager with pcmanfm.
When I try to access /home/"user"/.config/deluge it freezes the whole computer and I have to restart x.
I noticed this because according to the permissions my normal (non-root) user doesn't have write privileges and that doesn't seem right.
Last edited by ctarwater (2009-03-08 02:06:53)

ctarwater wrote:When I try to access /home/"user"/.config/deluge it freezes the whole computer and I have to restart x.
I noticed this because according to the permissions my normal (non-root) user doesn't have write privileges and that doesn't seem right.
I can't help you with your main problem, but for this one, just do:
sudo chown -R $USER:users /home/$USER/.config/deluge

Similar Messages

Switched HD to new computer now ethernet won't work [SOLVED]

Had an old Dell desktop in which the motherboard failed (capacitors leaked), but was able to move the HD into another Dell with a similar architecture (Dell Optiplex GX270 ->Dell Dimension 8400). Everything seems to work fine except the wired internet.
When I boot up ip link shows the eth0 as "DOWN". Performing a
ip link set eth0 up
seems to correct this except when I run
dhcpcd
(or dhclient) "DISCOVER" packets are sent out with no response (dhcpcd keeps sending out discover packets until it times out).
lsmod
shows that the correct module is loaded. Which is tg3 according to lspci -v which states the model as a
Broadcom NetXtreme BCM5751 PCIExpress
I've played around with the configurations in dhcpcd.conf, with unplugging and re-pluging the ethernet cable, unloading and reloading the kernel module, and any other possibly related suggestions I could find in the forums (which I've speant a few days search through).
Any advice?
EDIT: Since I've had this problem I've disabled the [email protected] from systemctl (which was how I origionally was autoconnecting in the old computer) and have just been trying to connect manually.
SOLUTION: needed to register the new MAC address with the IT administrators of the network in order to be whitelisted.
Last edited by punk_physicist (2014-05-06 19:39:27)

dmesg|grep eth
gives
[ 11.175315] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:11:11:eb:db:03
[ 11.175325] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 11.175331] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 11.175336] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 157.193110] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 158.886100] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[ 158.886117] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[ 158.886150] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
EDIT: I believe that everything after 157 above is after I give the 'ip link set eth0 up' command.
Last edited by punk_physicist (2014-05-05 23:00:21)

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I have a iphone 4s with ios 8.3 and I used to be able to sync only a week or two of emails from outlook email. Now it won't let me do that and it syncs all my inbox. How can I change it back to sync less. I can't find the right place.

I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available? Any idea why that would be?

My USB CF Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore. It was last week and worked fine to get pictures from my camera. Now it won't mount. I have tried another card reader and the same problem exists. Also tried different cards..

Hi
My USB CF (Compact Flash) Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore.
Last week it worked fine to get pictures from my camera but now it won't mount at all.
I ejected it in the correct way rather than just disconnecting it but now i cannot get it to remount!
I cannot even see it in the disk utility or system profiler.
I have tried another card reader (a brand new one bought today) and the same problem exists. I've also tried different cards to see if that made a difference and they still arent being picked up on the Mac.
I have done all the usual things like rebooting, unplugging all other USB devices and then trying but nothing has worked.
I'm a photographer and I'm at my wits end here. I know the cards are fine as i have been using them without issue and they are also new.
Note: If I plug the camera in directly to the Mac, the Mac picks it up just fine as it always has done. Its just the card readers that it wont pick up anymore.
If anyone has any ideas at all other than the following (my so called friends advice) you'd earn my undting love:
Buy a PC
Use the camera (Thats why i bought the reader in the first place - importing RAW files from the camera is SLOW!)
Replace your CF cards (I have three 8GB cards two of which i had never used til today and they dont work either!)
Buy a new card reader (this is the 5th one in two days - none work on the Mac)
Many thanks in advance!
LIsa

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

My ipod has been accessed from another ipod and now it won't let me download anything what do i do

my ipod account has been accessed from another ipod and now it won't let me download anything...What Do I do?

Not sure what you are talking about.
Your ITUNES account can be accessed from any device or computer that has itunes, as long as you have your username and password. Using your itunes account from another device does not affect your ability to use the account from your device.
What is the issue?
You tried to do what?
And what was the result?
Error message?
What did it say?
What have you tried?

I tried to download iOS 6 on my iPod 4 and I disconnected my iPod from my computer and now it won't load. I even tried reconnecting my iPod to the computer. Help Please!

I tried to download iOS 6 on my iPod 4 and I disconnected my iPod from my computer and now it won't load. I even tried reconnecting my iPod to the computer. Help Please!

I was trying to update my iTunes, so the computer asked me to restart my computer. After I selected shut down. I knew it was a mistake. What should I do?

I had to change a password, so I deleted the site from remembered passwords, and now firefox won't remember my new one

I changed a password, so I went to tools and deleted the password from saved passwords. Now Firefox won't remember this password for the site.

See:
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*http://kb.mozillazine.org/Password_Manager
Your above posted system details show outdated plugin(s) with known security and stability risks.
# Adobe Shockwave for Director Netscape plug-in, version 11.0
# Java Plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Shockwave|Shockwave for Director]] plugin to the latest version.
*http://www.adobe.com/shockwave/welcome/

HT2396 I quit iTunes while voice memos were importing from an ipod. Now iTunes won't import the memos. What do I do?

Hello. I quit iTunes while voice memos were importing from an ipod. Now iTunes won't import the memos. What do I do?
Thank you very much,
Roger

I have the same problem!! only thing is that i have the ipod touch 5th generation and a mac. I've been trying to find a way to get all my music to play cuz it will only play on itunes but when i try to play it on my ipod it'll just show a circle with a red square in the middle next to the songs i cant play.

HT201628 I accidentally removed some components from itunes (uninstalled) and now it won't function. If I uninstall and reinstall, will my data be recovered...downloads, etc?

I accidentally uninstalled some components of itunes when i repaired my PC. now itunes won't work. If I uninstall and reinstall, will I lose all my data?

Your data will remain as is. Back it up anyway.
(88923)

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please?

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

Did the iTunes update & now it won't work at all!

I downloaded the iTunes update 2 days ago, and now iTunes won't work because it needs 10.4.9+ & all I have is 10.4.8
I tried to download the 'Combo' 10.4.11 but it crashed my system (the 'Restart' hung with turning wheel for over 2 hours) & I had to reboot from disk at the cost of several hours.
I only use iTunes for listening to the radio worldwide, nothing else. I have no iPod, have no purchased music.
Is there any way to uninstall the update? iTunes was just fine for me before the update.
Or, is there any way to install the 10.4.11 from a friend's disks? - since it's just an 'Update' which is available online, it doesn't sound like it would be illegal, but I want to keep "Kosher". I am assuming that even though the downloaded update crashed my system, loading from disk should work.
Any help would be appreciated - I am not very computer literate, so the simpler the better!
-Erik

Finally solved the problem by going back to an older version of iTunes, which I found on FileHippo.com - I chose version 7.0 since I had no idea what older version I used to have.
The uninstall was the hard part, but these instructions did the trick:
http://www.oldapps.com/forum/showpost.php?p=925&postcount=34
Even then, when I got the "iTunesSetup.exe", clicking on it got the message:"iTunes library cannot be read because it was created by a later version of iTunes". Apparently some fragment of the "update was hiding somewhere.
I finally solved this by right-clicking (option+click) on it.
So now I have iTunes back & have no need for the "Combo Update"
At this point, having had a week of frustration from that worse-than-useless "Update", I have no intention of messing with any more "Updates". This computer is, and will remain a 10.4.8 machine.

I just upgraded to Snow Leopard 10.6.8 and now Safari won't work. What version of Safari do I need?

I finally got around to updating to Snow Leopard 10.6.8 and now Safari won't work. It was version 4.0.5. I know I should of upgraded prior but didn't need to because everything was working. Any suggestions how to fix this?

Are you opening Safari directly from /Applications rather than using a Dock shortcut ?.
If the one in /Applications won't work either - what happens exactly... if there's a crash report, please post it here.
Also, check Software Update, and/or manually install Safari 5.1.9 for Snow Leopard

Downloaded Yosemite this AM on blind faith. Now printer won't work.

Now printer won't work. "Epson not supported" Have a Artisan 730. In middle of job. So sick of updates that are not ready, eating my hours and hours.
Is solution to buy a new printer? Can I "System Restore" on an iMAC and get rid of this "update"?
I have tried to reset WiFi, rebooted, tried to reload CD setup, nothing works. Meanwhile will go plug printer into XPS One2710.

Your printer is supported, according to OS X: Printer and scanner software available for download - Apple Support (Epson drivers) and About AirPrint - Apple Support (AirPrint). Don't use the cd that came with the printer to install the drivers, those are out of date.
Delete the /Library/Printers/EPSON and /Library/Caches/Epson folder, delete the printer, and then add it using AirPrint (without installing any drivers) or download the Epson drivers from Software Update or Epson Printer Drivers v2.18 for OS X.
Hope this helps.

Changed phone number, now phone won't work properly

After weeks of calls for the former phone owner the last @4AM, I initiated a number change. As soon as I hung up, the phone began to work differently. Bad signal, voice calls say dialing, but never go through. IE browsing doesn't work. A tech yesterday had me switch from Global mode to CDMA, which made things work better, but not like the phone used to be. My wife bought the same phone same time and hers still has the right number of bars and 3G on. Mine now goes to 1X or 3G one bar. It is a little disconcerting to think something as simple as a number change could make a nice phone all but a paperweight...obviously if the phone was great before, then not working right afterwards, there is an issue. Tech went through all the settings on the phone. *228 etc. Suggestion was to leave in CDMA mode...yet again, phone didn't need this before and it didn't restore signal and speed that was present proof to number change.
Help please!

While I unfortunately have no idea how to fix it, I just wanted to let you know I feel your pain. I am in college, and last year I was living in the same apartment complex I lived in the year before, just a different apartment. I had the exact same phone both years, the original Droid. Yet for some reason, last year there was a 2 block radius around my apartment where I had absolutely no service whatsoever. I had to buy a network extender, and this only worked half the time. I went through EIGHT Droids, before they finally gave me a Droid 2. This Droid 2 worked with the network extender, but it made no sense to me why this was even an issue. My roommate had the HTC Incredible with Verizon, and his phone worked just fine. I went through so many tech support guys at Verizon, made it to level 3 numerous times, and they never could figure out why in the world this was happening. Go figure. They suggested changing phone numbers, but I did not do this, because I didn't want to and it made no sense why this would fix the issue. Heck, they only said it might fix the problem anyway.
Now I have the HTC Trophy and I am living in a different apartment complex. It works fine here and I ventured over that way just to test it out and it worked fine there. Makes absolutely no sense. But yeah, I feel your pain and I hope you solve your issue.

Switched from lxde to e17 now Deluge won't work?

Similar Messages

Maybe you are looking for