Switched ISPs and Mail Won't Send

Just switched internet providers (Time Warner Cable to AT&T). Internet and incoming mail work fine, but outgoing messages won't send. My outgoing mail server is my sever at work. How do I get my messages to send?

AT&T might be blocking all network traffic destined for port 25 of any destination, except for their smtp servers (I don't have them, so am unfamiliar with their policies -- but if you used to be able to send, that's what I would suspect). Talk to your I.T. guy at work and see if your work's server can accept incoming on a port other than port 25, like port 465 or port 587.

Similar Messages

  • Leopard and Mail won't send emails, same exact setting working on my PC

    I am trying to set up my new MacBook to use the Mail app (or Thunderbird, or any mail program at this point). I can get mail, but can't send mail. I've read lots of discussions on here about port numbers, etc. Here's my problem - all my setting work on my PC laptop in all locations. Same settings don't work on my MAC with mail or with Thunderbird. And Eudora on my Mac just freezes...I can't test the same settings on my desktop mac cause it's a company machine. Ideas?

    Did Earthlink have you try using their authenticated SMTP server?
    If not, try changing Earthlink's SMTP server settings to the following:
    SMTP Server: smtpauth.earthlink.net
    Server Port: 25 or 587. Assuming Earthlink is your ISP, 25 should work.
    Use Secure Sockets Layer (SSL): Off or not selected.
    Authentication Type: MD5 Challenge-Response. Not sure if this authentication type is available with 10.2 and if not, select Password.
    User Name: Your entire Earthlink email address.
    Password: The password for your Earthlink email account - the same password used to check the incoming mail server for new messages.

  • HT1338 mail icon not in dock mail won't send a pop down dox appears and when message placed a black dot appes=ars on red dot appears and then the message will go into draft ?

    mail icon not in dock-  mail won't send - a drop down small box appears and when a message is typed in to sent the send icon goes grey and a black dot appears on the red dot in top left side of box and the message will be sent to drafts only

    Hello Bill,
    Who is your eMail provider, the part after the @ sign?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.
    Mail: Can't send messages, "Cannot send message using the server smtp.xxxxx.com" alert appears...
    old: http://support.apple.com/kb/TS1482

  • Apple Mail won't send invitations when initially closed

    I just started using iCal to send invitations for appointments through Apple Mail. When Apple Mail is opened already when I create the appointment and click Send in iCal, it works fine. The mail is sent and delivered to the appropriate address.
    But if Apple Mail is closed initially, the application starts and the invitation is queued up in the Outbox but is never sent. I can manually open up each invitation in Mail and send them individually, but why is the behavior different? Whether Mail is opened or closed when I send an invitation, it ought to deliver the invitation automatically. By not being sent, I may not realize the invitation hasn't been delivered, making the process very error-prone. Is there a way to guarantee the invitation actually gets sent without having to check the Outbox every time?
    Is this an iCal bug or an Apple Mail bug? I saw no settings in Apple Mail for sending messages at shutdown or any other setting like this. Instead, these invitations may end up being buried in my Outbox for a very long time before I notice and by then, it may be too late.

    ronright wrote:
    Since I bought a new modem/router (Netgear n600), my Apple mail won't send e-mails. It will receive. My ISP is AT&T & the email accounts are via yahoo. I have a Macbook Pro with a recent OSX.
    The most recent OS is currently OS 10.8.3.  Your system profile confirms you are still using Mac OS X (10.7.5).  If this is incorrect, please correct your profile so that you will get the correct troubleshooting suggestions/solutions. 
    Also, post in the OS/Mail forum of whichever OS is currently installed on your MBP.  It's where the OS/Mail expert helpers hang out at. 

  • Mail won't send but Connection Doctor says smtp account OK.

    Mail won't send but Connection Doctor says smtp account OK.
    I can receive mail but can't send it from Mail 3.5. Same problem on a wired G5 and on a wi-fi MacBook (using the same account), so not hardware related. Worked fine 'till today - I didn't change anything in between times. Incoming mail no problem. Tried mail rebuild, keychain first aid, deleting the account, repair disk permission - doesn't help.
    Mail's connection doctor says "smpt.xxxxxx - connection to server succeeded, no login required."
    Anybody any ideas? Thanks, N

    Been having the same problem for a few weeks now. This has been working just fine, and all of a sudden - nothing. The update to 10.5.6 didn't do anything to fix this either.
    I've spent numerous hours on the phone with the Apple support. Seeing as the two other accounts that I have configured work with no problem, they say that this is a problem with the provider which is also the ISP. I then called the support line for the ISP and informed them of this and they say that it's a problem with the software.
    Interestingly, if I send a message to somone with the same ISP, the message will go. But I can't send a message outside of the provider. Does anyone else have this problem?
    Also, from another forum, they suggested rebuilding the LaunchServices database. The Apple support didn't see what that would do. But I tried it anyway and the problem still exists.
    Another intesting thing is certificates. It's only happened twice, but I've received the message saying that Mail can't verify the certificate XXXXX which validates the identity of the smtp. Anyone else get this? I thought perhaps I could delete the certificate and it would magically reappear. But when I go into KeyChain, the certificate is listed only under System Root and I can't delete it.
    ideas?

  • Mail won't send mail when in wireless mode but works fine when wired

    Ok, this happens all the time. I have several pop email accounts, all of which work fine when I am hooked in to an ethernet cable, but Apple Mail won't send any of my outgoing mail form any of my accounts when i'm am working wirelessly.
    I always get a message like:
    Cannot send message using server smtp.name.net
    I try to switch servers and I cycle through all of them, getting them same message, followed by things like:
    The server response was: 5.1.2 Bad or missing RCPT domain k39sm5757680wah
    Any advice.

    Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
    You may use “network locations” to more easily switch between network settings if necessary, as described here:
    Using network locations in Mac OS X

  • TS3276 Mac Mail won't send emails with signatures

    My Mac Mail won't send emails with signatures. I get the "whoosh" sound and they show in sent mail, but the recipient doesn't receive them until I take off the signature and resend the email. Without a signature, it is received. It never used to be a problem, but started this past month. Please advise!

    Did Earthlink have you try using their authenticated SMTP server?
    If not, try changing Earthlink's SMTP server settings to the following:
    SMTP Server: smtpauth.earthlink.net
    Server Port: 25 or 587. Assuming Earthlink is your ISP, 25 should work.
    Use Secure Sockets Layer (SSL): Off or not selected.
    Authentication Type: MD5 Challenge-Response. Not sure if this authentication type is available with 10.2 and if not, select Password.
    User Name: Your entire Earthlink email address.
    Password: The password for your Earthlink email account - the same password used to check the incoming mail server for new messages.

  • Mail won't send from photos in iOS 7

    Mail won't send from photos or from notes in iOS 7

    What did you do to fix it. My email that I create goes immediately to drafts and won't even show in the outbox. Could you let me know what you did to fix it ... please???

  • My mail won't send...

    Hi,
    My mail won't send on my laptop.  There is spinning next to "Send" but the message remains in the outbox.
    I deleted and readded all email accounts.  This did not solve the problem.
    I started a chat with Apple Express support and they said that Lion doesn't support Apple mail so they couldn't help.
    I can send via webmail.
    I can receive mail.
    One error message I receive after it has tried to send the message for awhile is:
    Connections to the server “mail.smtp.me” on the default ports timed out.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
    My password and username are correct; however, the following error message appears in the Connection Doctor window:
    Trying to log in to this SMTP account failed.  Verify that the username and password are correct.
    Does anyone have a real fix for this issue-it doesn't happen all the time, but has been happening every day for the past week and I need a reliable program to send mail.
    Thanks.
    lsb

    Becky,
    Check your smtp server and check if your password is added. After ungrading Mail might have lost the password. 

  • Mac mail won't send to aol addresses any advice?

    mac mail won't send to aol addresses any advice?  i can't figure this one out!  thanks.

    Hello, mrselisec. 
    Thank you for visiting Apple Support Communities. 
    I would need more information regarding exactly what is happening when you attempt to send to an AOL email address to better assist you.  However, he are a couple basic troubleshooting guide that may help with this issue. 
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    iCloud: Troubleshooting iCloud Mail
    http://support.apple.com/kb/ts4002
    Cheers,
    Jason H. 

  • Mail won't send.  dotMac SMTP server Issue?

    Using 10.4.8 and Mail. Mail won't send. Says to try a different server, but I don't have anything other than dotMac. Others are having the same problem. Anyone know a solution?

    Who is your Internet Service Provider? What is your current SMTP setting?

  • Mail won't send to Yahoo Japan

    When I try to email my boyfriends PC, Apple mail will not send the message. It tells me to ensure I have entered the address in correctly, which it is, but it will never send the email.
    His PC address ends with @yahoo.ne.jp
    but I can email his phone address, which is @d8.dion.ne.jp
    Anyone know why Apple mail won't send to yahoo?

    For some reason, Mail prevents sending to multiple
    addresses (if they're in a group) if you've indicated
    in "preferences" (under "composing") that you do not
    want addressees' names to be shown in the "to" field.
    The only way to send to a group is to allow the names
    to be shown.
    I, and others, have mentioned this ever since Mail
    arrived. Apple has not yet fixed the
    bug.
    This royally bites! I had this same problem before, and was told that by upgrading to Mail 2, (Tiger), it would fix this!
    I sure as heck don't want all the names listed, that is very unprofessional.
    Will it work if the addresses are "shown", but are in the BCC window?

  • Mail won't send says no outgoing server

    I changed my passwords for mail....
    Now my mail won't send
    I did go in and change my passwords
    but still won't send
    Says my connection offline
    I go to connection doctor and says they are connected.....
    Any ideas?

    Hi bearbean!
    Here is an article that will help walk you through some troubleshooting steps for this issue:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Mac mail won't send Button is greyed out

    I can't send emails Mac Mail won't send The Send button is greyed out. Seems to be receiving OK & I have checked with my provider all settings are OK

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

  • Mac Mail won't send .mac mail

    All of a sudden Mac Mail won't send mail from my .mac account through it's mail server even though the MobileMe sends mail just fine.
    Anyone know what may be up?
    I hate using the mobile me mail.

    I experienced the same problem--unable to SEND mail using MobileMe server. Changed to port 587, now seems to work (cross fingers).
    I also noticed that I cannot change the incoming mail server name from "mail.mac.com" to "mail.me.com." When I try to change then save, it reverts to "mail.mac.com."
    By the way, under the "Advanced" menu, can anyone explain "IMAP Path Prefix"? It's blank by default, I gather. Why might someone use a prefix here? Also the default port is 143 and the "Use SSL" block is unchecked.
    Merely curious.

Maybe you are looking for

  • Date calculation in OBIEE

    Hie my requirement is: I want to apply a filter on the the column 'reported_date'. Filter should be display all the rows with reported_date within last 1 year. any help on how to write it? Vik

  • 1920x1080i AVCHD to DVD!

    I am not found of "avchd" format at all. very messy codec, I shot a wedding film In AVCHD 1920x1080i results are fine but clients are not demanding for BLU-RAY they want DVD. Should i create AVCHD project in PPRO5.5 (i dont want to) very heavy to wor

  • Deletion of QUery view via Query Designer or via Web interface

    Hi, We have deployed SAP BI 7 with Web access only for user. Only some Key users are allowed to use Query Designer. In fact, all users can create view through Web analyzer. However, they have no way to delete these views. It appears that view deletio

  • Unable to use action blocks in xMII 12.0.2

    Hi, We recently started working on MII 12.0.2 and migrated our xMII 11.5 transactions using the migration tool provided by SAP with MII 12.0 version. In MII 12.0.2, when i open the migrated transactions all the action block images are shown as yellow

  • How do I sync my Nexus 5 ( Android 4.4 Kitkat ) with iCloud ?

    How do I sync my Nexus 5 running android 4.4 kitkat with icloud. I mean the calenders, reminders etc. The remimders that i set on the nexus 5, I recieve on my ipod and mac....but the opposite doesnt happen unless i set it in the gmail calendar.... Ho