Switched to external monitor lost access to Diagnostic Policy, Basic Filtering Engine, cannot print from interenet explorer

Laptop running windows 7
I switched to an external monitor (broke the LCD) and lost all sorts of things
1) Diagnostic Policy was not running, and could not be started via services.msc - I received "Access Denied" Error.
Fixed with
net localgroup Administrators /add networkservice
net localgroup Administrators /add localservice
2) Base Filtering Engine was not running, and could not be started via services.msc - I received "Access Denied" Error.
Still not running - tried all the usual suspects
a) virus scan
b) SFC
c) registry entry looks fine
d) adding "Everyone" with full access to the ControlSet/services/BFE registry key
3) Cannot print from Internet Explorer
There are probably other issues .. I suspect there is a common underlying problem, but have no idea of where to look
Thanks
Jonathan
JonW

I dropped the unit on the floor on 6/11 around 1PM, and then tried to turn it on. I hooked the laptop up to an external monitor at 9:34PM.
This is a trimmed down subset of the log (I do not see any way to attach files to this post)
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Dhcp-Client        1004
Service State Event
Error      6/11/2014 9:35:13 PM
Dhcp-Client        50038
Service State Event
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7023       None
Error      6/11/2014 9:35:13 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
Dhcp-Client        1004
Service State Event
Error      6/11/2014 9:35:13 PM
Dhcp-Client        50038
Service State Event
Error      6/11/2014 9:35:12 PM
Service Control Manager
7001       None
Error      6/11/2014 9:35:13 PM
DistributedCOM
10005    None
Error      6/11/2014 9:34:52 PM
Service Control Manager
7024       None
Error      6/11/2014 9:34:52 PM
Service Control Manager
7001       None
Error      6/11/2014 9:34:49 PM
Eventlog
1101       Event processing
Error      6/11/2014 9:34:47 PM
Service Control Manager
7001       None
Error      6/11/2014 9:34:45 PM
Service Control Manager
7023       None
Error      6/11/2014 9:34:45 PM
Service Control Manager
7023       None
Error      6/11/2014 9:34:41 PM
Service Control Manager
7001       None
Error      6/11/2014 9:34:41 PM
Service Control Manager
7023       None
Error      6/11/2014 9:34:41 PM
VSS        8193
None
Error      6/11/2014 9:34:40 PM
Service Control Manager
7023       None
Error      6/11/2014 9:34:40 PM
Dhcp-Client        1004
Service State Event
Error      6/11/2014 9:34:40 PM
Dhcp-Client        50038
Service State Event
Error      6/11/2014 9:34:38 PM
Shell-AuthUI      5007
None
Critical   6/11/2014 9:34:27 PM
Kernel-Power    41
(63)
Error      6/11/2014 9:34:37 PM
EventLog
6008       None
Critical   6/11/2014 1:15:48 PM
Kernel-Power    41
(63)
Error      6/11/2014 1:16:06 PM
EventLog
6008       None
Error      6/11/2014 1:07:22 PM
WMI      10
None
Error      6/11/2014 1:07:14 PM
DistributedCOM
10016    None
Error      6/11/2014 1:05:59 PM
Eventlog
1101       Event processing
Error      6/11/2014 1:05:58 PM
Shell-AuthUI      5007
None
Critical   6/11/2014 1:05:38 PM
Kernel-Power    41
(63)
Error      6/11/2014 1:05:58 PM
EventLog
6008       None
Error      6/11/2014 1:02:17 PM
Diagnostics-Performance
300         Standby Performance Monitoring
Error      6/11/2014 1:02:15 PM
WLAN-AutoConfig
8002       AcmConnection
Error      6/11/2014 1:02:15 PM
WLAN-AutoConfig
11002    MsmAssociation
JonW

Similar Messages

Switch to External Monitor?

Am a new Mac user...trying to switch to my external monitor from the Mac Pro screen....any suggestions? thanks.

When you open System Prefernces/Displays do you see two panels, one called LCD and one named after the make of the external device ?
If so you can then configure the external as either a Mirror of the current screen or as an Extended Desktop.
If you want to use the external only and close the lid of the MBP then you need an external keyboard and mouse so you can set up 'Clamshell Mode' - this way you can then put the MBP to sleep by closing the lid and then wake it again by touching a key on the keyboard or moving the mouse.

IMAC screen dead.. Switch to external monitor?

Mu son's iMac has a dead screen. Black after startup... The computer is running, but he needs to switch the startup screen to the external monitor so he can make any additional backups he needs before chucking it into the garbage. Actually, it is under warranty, but he has files that need to come off it.
SOOOO, is the a keyboard shortcut to switch the monitors???
Help.

HI Mike,
you could try command command + f1 (the key next to escape)
if that dose not work try fn + command + f1.
Alternatively if you have another mac and a firewire cable. you could plug the imac into your other mac, and boot the iMac into Firewire target disk mode; and copy the files to the other computer. Firewire disk mode makes your imac act like it's an external hard drive.
-tt

Trayer does not Adjust correctly when Switching to External Monitor

Hello
I use a laptop with xmonad and xmobar and trayer. When i connect my external monitor via VGA, i set it to primary. My xmobar moves perfectly to the top of my external monitor, with a width of 90% of the screen, as specified in my xmobarrc. However, trayer acts differently. It does move to my external monitor, however, its position overlaps with xmobar, and does not move correctly to the remaining 10% of the screen left by xmobar which i would like trayer to occupy.
How can i make trayer move correctly?
Thank you!
Last edited by fawkes5 (2013-01-09 19:10:51)

Hello again. If i start my external monitor when i startx (i.e through .xinitrc) then it sets correctly. So its just the dyanmic changing of resolution that trayer has trouble adjusting with.
Last edited by fawkes5 (2013-01-11 00:35:28)

Quickly switching to external monitor

Does anyone know of a way or any 3rd party apps that allow you to quickly switch between mirror, extended, internal only, and external only for a monitor like the windows + P function on windows 7? I think its a really useful feature that should be on mac too

I'm looking for similar solutions, and may try this (haven't yet, so grain of salt): http://www.macupdate.com/app/mac/8355/switchresx
It seems spendy at $19, but maybe it's worth it if you use it a lot?

How do I use an external Monitor to access files on my iMac with a broken screen?

I have an 20 inch desktop iMac with a broken screen. It is the files on the computer that I wish to recover, after that, I can be on my merry way. Unfortunately, VileVault was on (Not my choice), and for some reason, when I target the disc image of the broken mac with a new one, ONE of the accounts "appears" to be completely empty. All of the accouts were running FileVault, but only one (mine) failed to be transferred because it is "empty". I refuse to believe that my files are actually all gone, because theoretically there should be nothing wrong with the CPU itself, just the screen.
Thus my goal is to use a monitor on my broken screen iMac and simply log in and access my files normally, and perhaps pull them out with a USB or something. I have a DELL monitor, and a DVI (The big hairy plug with screws I think) converter that works with my old iMac, along with the male/male DVI cord. However, when I hook it up, nothing happens. I have tried booting the old CPU while holding F7, and option as I read on a forum, and neither produced results.
Does anyone have any ideas on how to 1. Get the monitor to simply show what's going on on the mac? or 2. Pull out my files through some other means?
Thank you.

If you have a second Mac computer, you may want to try to copy over as many files you can. One way is to use target disk mode.
http://support.apple.com/kb/HT1661
http://lowendmac.com/misc/06/0710.html
You need to follow this procedure to recovering a filevault id. Mac OS X 10.3, 10.4: FileVault - How to verify or repair a home directory image ... http://support.apple.com/kb/HT2631?viewlocale=en_US
Robert

Print out size lost control after upgrade to osx 10.9, cannot print 100% document original size, why?

As subject said.
I'm using Xerox 1450GA, before upgrade to OSX 10.9, printing Adobe file could be in 100% real size. After upgrade, lost control, even checked setting in 100% in setting, come out image still auto reduce few percents, that make me confuse and cannot complete digital printing jobs, someone have same problem? Please help to solve...

I've spent hours on the phone going in circles with HP's "support" (I use the term loosely here) and can confirm that it's a driver issue. The best part is, HP and Apple claim that neither of them have a copy of the v2.14 driver that actually worked, and I can't seem to dig one up online anywhere. I've tried everything under the sun and just gave up... ordering an Epson and selling both of my HP's. I think the only other option is to wait for HP to release working drivers, but since they don't even seem to understand that their driver is the source of the problem, I wouldn't hold my breath.
It seems really crazy to me that neither the manufacturer nor Apple keep a copy of the previous driver, but that's what I've been told. HP did release what they're calling a new 10.9 raster driver (available on their site), but it didn't fix the problem for me. If you have a timemachine backup from before the 2.16.1 driver was released, I'd restore to that and turn off automatic updates. If you don't (like me) seems like your stuck.

Cannot print from my computer, windows denies access to add printer, can copy and scan

dell laptop, wireless, will not let me add printer, altho it shows the printer scan and copy...........

Hi flalady,
Thank you for your response!
What happened when you tried the guide I had posted?
Do you see any error messages on the printer's display screen?
Are you able to print a test page? Video: Printing a Test Page - HP Photosmart 6520 e-All-in-One Printer.
In the meantime, please try the guide I had posted earlier, as well as the HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can't get F7 external monitor switch to work on 3000 N100

I am trying to connect an external monitor to my Lenovo 3000 N100 but I can't get Fn-F7 to switch monitors. It does nothing at all. Can anyone help me? Running XP SP3.

Hi Guys. Thanks for your help. I've had a little success but still not fully working. I've done a complete update, including BIOS, Power Manager, Power Management Driver, System Interface Driver, Hotkey Driver and finally Presentation Director. Presentation Director wasn't working at all before, and now it is. It comes up when I press Fn-F7 and gives me the option to switch between "Notebook Only", "Same Display on notebook and monitor", "Extended display across notebook and monitor" and "Extended display with "Presenter View Enabled" (I don't understand the last one, it seems to be the same as the next-to-last).
However if I click "Fn-F7 settings" and select "Switch display output from the Notebook LCD to external monitor to both (and then repeat)" then subsequent Fn-F7 presses do nothing at all.
It has given me what I need, which is the same display on both monitors, but it would be nice if the Fn-F7 toggle worked as well.
It would also be nice if I could switch to external monitor only, which I still can't do.
Any more suggestions?

Lost Firewire connection to external monitor??

I cuurently use a CanopusADVC110 to firewire from FCEHD to my external monitor.
Everything was fine until yesterday having captured some footage from VHS via the ADVC110 to my project, i then unplugged the VHS and since i have no visuals or audio on my external monitor?
I have tryed unplugging everything,restarting,shuting down, and still i don't even have the option to go firewire in the RT options on the timeline?
Any suggestions most welcome and thanks to all in advance.
Ali

Ali,
Check how you have your monitor connected to your ADVC; did you accidently disconnect your monitor when you disconnected your VHS deck/cam.
Also, the ADVC toggles between DV-in and Analog-in, sometimes on its own. It had to be in Analog-in mode when you captured from your VHS deck; it may still be in that mode. Use the AV/DV button on the top left of the case - make sure it is set for DV-in if you want to view on your monitor.

External monitor goes blank

The backlight went out on my Toshiba laptop so I hooked up a new(er) flat screen monitor to it. The Windows XP startup windows _begins_ but never gets _to_ my desktop. Windows XP startup runs for about 20 seconds and then the monitor reads 'no signal.'
I simply want to access information (files, folders or photos) on the Toshiba before I sent it to laptop paradise forever.

Hi
Usually you should be able to switch to external monitor using the key combination FN + F5.
I think this key combination would not work in safe mode since safe mode loads only some essential system processes.
So if you are able to boot the Windows OS in normal mode then check FN + F5
You could also try to change the display settings in graphic display properties -> last tab Settings (to get the display properties click right on desktop and choose Properties )

T410 won't recognize external monitor on KVM

I have a ThinkPad T410 with Windows XP SP3. I've installed the latest Presentation Director (4.55) and the latest Intel HD drivers (6.14.10.5273). If I hook up my external LCD monitor (an HP L2045w) directly from the VGA port on the monitor to the VGA port on the laptop, I can extend my video display to this monitor. However, if I attach the monitor through a KVM switch (a Belkin Omniview E series), I can't. I don't have a dock for this laptop.
The weird thing is that if I set the BIOS so that the external display is the boot display, the external mointor shows the boot screens even when on the KVM switch. I can even get the external display to work on the KVM switch if I boot into Safe Mode. But when I boot into Normal mode while on the KVM switch, the external monitor goes dark as soon as Windows switches video modes, and after I log in I can't extend my display onto the external monitor.
Any ideas?
BlueBearr

I'm having exactly the same problem.. I'm thinking it might be a power issue (the power adapter for the omniview series was optional) - but I've never seen this before, and I'm seeing other external monitor issues crop up... let me know if you find a solution.
Oh, my keyboard and mouse work fine, just not the monitor.

Connect my macbook pro to 2 external monitors

I want to connect my macbook pro up to 2 external monitors. Anyway to do this?

Yes the power cable from the monitor 1( apple thdb) goes into the laptop and the monitor 1 (apple) to the Lacie and then a short HDMI /Thuderbolt to the Monitor 2 and the lacie and it powered up ok .
I had tried earlier to daisy to Monitor 2 (acer) off the Monitor 1 apple but that did not work and was surprised when it worked off the Lacie.
The only issue is that I try and switch off Monitor 2 first and properly eject the lacie before powereing off the laptop if that makes sense but there is an apple script to do this which I am going to try

Macbook Pro 15 Late 11 extreme fans noise when using external monitor

Dear Apple, recently I bought Macbook Pro 15 Late 11. I really love it's speed and new OS X Lion, BUT this Macbook really noisy when I use external monitor and keyboard. I work on external monitor all the time. I don't care about how hot my Macbook is when I'm on external monitor. Let it just be hot and quiet.
P.S. Example. I run Ableton Live and have 6200 RPM working on external monitor (awfully loud!). CPU 90% idle. When I switch off external monitor and use internal one, RPM drops down to 4500 with the same Ableton work session. By the way, I don't need cool graphic card. Apple, let our work days be quiet.

I did that and it didn't help. It's common problem with an external monitor. Here are some links:
http://forums.macrumors.com/showthread.php?t=1162550
http://www.ivy-rose.co.uk/Articles/Macbook-Pro-Cooling-Issues

Extern monitor only when connected?

hi, i have a big problem, i have a macbook pro 3,1 running arch with nvidia driver, and i have an extern monitior, which i want to use, if plugged in on dvi.
i want to use the extern monitor only, no macbook screen, i know i can enable the monitor with nvidia-settings, but when i shutdown, disconnect the monitor, and for example have a journey with the train, then my macbook cannot be used, because the configured screen is the extern monitor, and the macbook screen is black. no hotplugging here
if theres no clean solution for this problem, maybe there is a cmd to switch to external monitor only, which i can enter manually every time i need the extern screen, and after reboot it switches back to macbook screen?
i hope someone can help me....
regards chief

You can try something like this in your .xinitrc
xrandr | grep DVI | grep " connected "
if [ $? -eq 0 ]; then
xrandr --output LVDS1 --off
xrandr --output DVI --auto
fi

Switched to external monitor lost access to Diagnostic Policy, Basic Filtering Engine, cannot print from interenet explorer

Similar Messages

Maybe you are looking for