Switches window when I use the transport control

Hello
I have downloaded Audition CS5.5 trial version. When I'm in Mixer Mode and press the transport buttons in the transport panel (exept play, stop and pause) it switch the window to the Editor mode. Can anyone help? Macbook Pro 17 "- 2.5 GHz IntelCore Duo 4GB RAM, OSX 10.6.8
Bjorn

I have just checked and it is the same on a PC. There is some confusion because AA CS5.5 now calls the tabs heading the Multitrack view Editor and Mixer, whereas previously Audition called the new Waveform view the Edit view.
So, yes, clicking on any of the Transport Fast Forward, Rewind, Move to Next or Previous does switch automatically to the main Multitrack view because it assumes that if you do anything but Play, Pause or Stop then you need to see the waveform to be able to identify where you are going in the audio file. But I can see that it might be useful to be able to move between markers whilst staying in the Mixer view. However if you have the Markers window open you can double click in there on your markers to move between them without leaving the Mixer view.

Similar Messages

Using the Transport Controls of O2R96 for Logic Pro MMC

Hi guys! They have done a nice job on Logic Pro 7.1.0 with getting it to talk to the O2R96 every start up. It's a pleasure not to have to go into Control Surface Setup everytime... There are still a few issues that they haven't yet resolved with the Control Surface that used to work amazingly well on Logic 6.4.2...
Firstly, as I am really used to using the Transport Controls on the O2R96 for playback control when mixing a session down. As one's head never needs to leave the "sweet spot" you just edit till happy (never having to continually turn to the HDR, etc)... Well, on the O2R96 (I'm using version 2 of the O2R96s operating system), ever since I upgraded to Logic Pro 7.0.0, but the Transport Controls don't function at all... Not even the Suffle! They did when I was using Logic Pro 6.4.2. Has anyone else complained of this problem yet?
Also, have noticed that when mixing tracks down using the O2R96 as the main Control Surface, that the faders on screen miss out values between -0.5 and +1.2, so that the 0.0 Unity level cannot be drawn manually into the automation just using the Control Surface Faders. This is annoying, as this slight jump can cause a blip in the mix that stands out like a sore thumb and can take hours of editing to get rid of them... Again, have you had reports of anyone else finding this?
If you have any solutions, would be very obliged...

Got the transport controls working at last. Thanks Dave (from www.logicprohelp.com)! Faders still glitchy between -0.5 and +1.2. No unity level...
Tried adjusting "Control Surface" MIDI Bandwidth, and even adjusted "Controller Assignment" parameters by switching 'pan pots' on O2R96 and 'faders' on O2R96 to control 'volume faders' and 'pan contols', respectively, within Logic. Seems that this glitch still occurs while using the O2R96's pan pots to control volume fades within Logic.
Anyone at Apple that can help? Is it an error in the code you guy's have written?

Mavericks showing 3 desktops when I use the mission control

Hi Guys,
I was hoping someone could give me some advice. I have y cintiq plugged into my macbook pro. Everything works fine but when I used mission control it shows I have 3 desktops active. How can I reduce it to 2? Not only is it something I believe should not be there, I also feel it may be eating up memory.
Any advice very appreciated, Thanks.

Ah, I figured it out. As I hovered above a window whilst using the mission control action I noticed an 'x' in the corner of the display I didn't want and closed it. Hope this helps incase anyone had the same enquirey

HT4847 i am unable to sign into icloud on my windows 7 computer using the icloud control panel . keep on saying server error

unable to sign into icloud account from my windows 7 pc. keep on getting the message serwr not available

Hi,
In the Finder use the Go Menu whilst holding down the ALT key.
Select the Library that appears when you do this.
Navigate to Containers/com.apple.soagent/Data/Library/Preferences
You will notice that many of the items are Aliases (to the Originals in ~/Library/Preferences).
But there are exceptions.
Delete (Drag to Trash) the com.apple.soagent.plist and com.apple.messageshelper.AccountInfoController.plist
Restart the Mac (I have not worked out is SOAgent launches when the Mac does).
Restart Messages.
If this does not work navigate to ~/Library/Preferences
In here find and Delete com.apple.ids.service.com.apple.madrid.plist
This will need a Restart of the app.
You will be asked Again for your Apple ID
9:28 pm Sunday; January 26, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?

It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

When using the new controls of CVI 7 in my DLL it crash on the DisplayPanel call

I have a CVI DLL that was build under CVI 6. When I recompile it in CVI 7 everything works fine when I load the DLL from my application. But If I add a button on my uir file with the new CVI 7 style (no event code associated, just a plain button) my DLL crash and hang my main application on the DisplayPanel call. If I don't use the new controls (use the classic-style controls) everything works fine. I use LoadPanelEx to load my uir file. The returned panel handle is good (> 0) But when I call DisplayPanel it doesn't show me any error but just crash my DLL and jump back in the DLLMain function saying that my process is detaching and hang my main application.
I am running on Win2k. I have
LabVIEW 7 and LabVIEW 6.0.2 installed also. The main application that calls the DLL is made in Delphi 6.
I have re-installed the run-time engine from the CDs but this didn't do the trick. Is there something else that I must include with my DLL to use thoses new controls styles. The DLL is running from the same place where it was build.

Hi,
I have created another cvi DLL and it create the same behavior in my application (crash on DisplayPanel). But if I do a standalone CVI executable with thoses new buttons everything is fine. Also I have created another application(in Delphi) to load the cvi-dll and it works fine in that one. So I would tend to say that it is in my application but on the other hand everything works fine if I don't put thoses LabStyle controls...Weird I know...
In shorts It is just crashing with a specific application but for any UI project that I create. If I don't put thoses buttons everything is ok...Any other advises would be helpful because I'm kind of out of ideas...
Gilles Hache

Firefox 3.6.13 - Why, when I use the dropdown File menu to open a new window, does FF open my Home Page tabs? All I want is a blank page.

I have four tabs in my home page:
2 - https://mail.google.com/mail/;
1 - http://us.mg5.mail.yahoo.com/dc/launch;
1 - http://www.facebook.com/login.php
When I use the "File" drop-down menu I want only a blank page, but I get the four tabs. How go I get other New Windows to open as blank pages?

A new window open by default with the Home page(s), tabs open a blank page.
The only ways to avoid opening a new window with the home page is either to set the home page to about:blank (ie disabling the home page) or use a bookmark with the location set to about:blank and use Shift + left-click to open that link in a new window.

How do u turn down the tick volume when using the remote control?

how do u stop the ticking(clicking) when adjusting the volume using the remote control?

Hi philippalldino,
I understand that you do not wish to hear your volume feedback when adjusting the volume of your computer. Here is an article that will tell you how to disable this feature:
OS X Mountain Lion: Turn off the alert sound for volume keys
http://support.apple.com/kb/PH10762
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

I want to be able to use 2 different scanner machines (A4 and A3). I have installed the 2 drivers. When I switch usb cables to use the other scanner in I get the message saying there is no scanner installed. I can see the 2 machines in the printer list.

I want to be able to use 2 different scanner machines (A4 and A3). I have installed the 2 drivers.
However it seems I can only use only 1 scanner.
Because when I switch usb cables to use the other scanner and try to import in Photoshop ,I get the message saying there is no scanner installed.
I can see the 2 machines in the printer list.

I want to be able to use 2 different scanner machines (A4 and A3). I have installed the 2 drivers.
However it seems I can only use only 1 scanner.
Because when I switch usb cables to use the other scanner and try to import in Photoshop ,I get the message saying there is no scanner installed.
I can see the 2 machines in the printer list.

Running windows 7 with plenty of memory.when i use the smart brush program is fine but when i start to use detail smart brush program shuts down,PLEASE ADVISE

running windows 7 with plenty of memory.when i use the smart brush program is fine but when i start to use detail smart brush program shuts down,PLEASE ADVISE what corrective actions need done
thank you

You should post that on the Boot Camp forum, that is where all the Boot Camp and Windows guys hang out.
Good luck.

I am running Elements 11 on Windows 8. When I use the healing tool, the entire image moves with the cursor. How do I fix??? Thanks!

I am running Elements 11 on Windows 8. When I use the healing tool, the entire image moves with the cursor. How do I fix??? Thanks!

With the Healing Brush Tool selected, in the Tool Options, click on Clone Overlay and check Clipped.

Every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

I just spoke with Tesco technical support (having been transferred to them by Clubcard support), who told me that the problems people are experiencing when visiting the Tesco site via Safari aren't currently being addressed because "not enough people have called to complain about it".
I asked what percentage of people he thought might make the effort to call instead of just giving up. He replied that he would be one of those who just gave up.
So it would seem that if we would like the problem to be resolved, we each need to take a few moments to CALL TESCO and ensure our complaint is logged by the technical support team.
Every voice helps

The Transport Control Buttons on the QuickTime window

Hello every body !!!
The Transport Control Buttons on the QuickTime window in Logic 9.1.7 disappeared…
Some one could explain me why and how to recover them ?
Thank you

Re Hello
Finally I noticed that buttons are not any more there in 64 bits mode but they appear in 32 bits...
Thank you

What controls the color of the cursor that selects text when you use the "Edit Document Text" tool?

Hi, I have had a student ask me a question I cannot answer: what controls the color of the cursor that selects text when you use the "Edit Document Text" tool?
I have only seen it appear as a black semicircle over each letter, but at a different computer in our training facility, this same tool appears as an aqua-green highlight.
Is it a preference I never noticed? Thanks for any info.

What version of Acrobat? What operating system?

Switches window when I use the transport control

Similar Messages

Maybe you are looking for