Switching Adobe country store after using Muse trial?

I have worked with the Muse trial version, using my old Adobe ID from Germany, although I have moved to  Denmark since creating this ID. Now I'd like to buy a Muse subscription, and pay with my Danish credit card. The subscription form says that I have to buy from the German store, or make a new ID.  I don't want to lose the work on the sites I have done with the trial version, so what should I do? Just keep the Adobe ID with the associated wrong German address?

Hi Jules,
Please refer to the following link http://forums.adobe.com/message/6009549#6009549
Regards,
Aish

Similar Messages

  • Aperture 2.0 Activation Key does not work after using older trial version

    I was using the installed trial version of Aperture 1.5+ in my recently purchased MacBook Pro Duo (December 2007). After using the trial version for 30 days I debated whether to take the plunge ...and then within a few days recieved word that v2.0 was out at 199$. That motivated me ...however, here I am nearly one week later without ability to activate a full blown version of 2.0.
    I recieved the activation key, but it doesn't accept it in the dialog to upgrade in the trial version. Hint seems to be that it is not a serial number I am entering but an activation key.
    I did not order a boxed version, so what do I do now? Support is not too helpful as I have searched Apple's website and have no clue as to where to go.
    Last resort ... I want my $199 back!

    did you download the trial for Aperture 2

  • I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

    I have been trying to get the full version of lightroom after using a trial version but it says something about "GB" ? And i need to log into different account or set up a new one? Please help?

    I would love to give you more information but i cannot access that page again? i can add Lightroom to my cart but when i go into my cart it says there is nothing in there? I have a red bubble above "my cart" with a number 4 in it to show there is something there but there is not? It just wont let me buy anything?

  • Installing Team client after using a trial version of Indesign

    When installing Team after using a trial version the cloud client won't let me install a full version of anything. All it shows is trial versions.
    The Mac is successfully registered with the Team. Any ideas?

    Hi macserver,
    Have you assigned the seats to user by logging into the admin console. If yes please sign out and sign in back to Creative Cloud Desktop. Also check the installed application language from preferences.
    Regards,
    Romit Sinha

  • I recently downloaded Adobe Premiere Element after testing the trial version...now I am having difficulty registering the program...please help...

    I recently downloaded Adobe Premiere Element after testing the trial version...now I am having difficulty registering the program...please help...

    Premiere Elements is not part of the Cloud, I will move this to that forum
    Premiere Elements Forum http://forums.adobe.com/community/premiere_elements
    Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
    -http://helpx.adobe.com/contact.html?step=PRE

  • How to use Purchased software after using CS4 trial...

    My issue is probably easy but I'm not sure how to convert back to my purchased Adobe Acrobat. 
    I have a disk for Adobe Acrobat 8.0 Professional but I downloaded a trial of Adobe Design Premium CS4 which includes Adobe Acrobat 9.0. The trial is now over and it keeps giving me this message "Adobe Acrobat was downloaded as a part of a suite, please open another application (such as Photoshop) to continue" or something like that.  Well the trial is over so this does not matter...it will not open even if I open something else - it's waiting for me to enter a purchase key. 
    Lord help me, I can open my documents in Adobe Acrobat 7.0 - which I do not even know how I have that on my computer but as you know it does not have the same functions. I cannot create a PDF and I cannot use the mark-up tools.  How do I use the ‘my’ 8.0 Professional for now without uninstalling the Design Premium Suite - or do I have to uninstall it for now? I am planning on purchasing the Design Premium, just cannot afford it right this minute but I do need the Adobe Acrobat up and functioning.
    Hope this is not confusing!
    *Cannot "open with" Adobe 8.0 at all.

    Use the CS4 cleanscript, then re-install Acrobat: http://www.adobe.com/support/contact/cs4clean.html

  • Should I switch my iPad off after using or lock off is enough?

    Hi. After use iPad should I switch it off or lock off is enough? When I cover my iPad it locks off. Does iPad work while it is locked off? Thanks.

    You can leave your iPad locked without any problem. Furthermore, it's recommended instead of turning your iPad off.
    Your iPad, when it's locked, can receive mails, updates..., but it doesn't take a lot of battery, so it doesn't make sense to turn the iPad off

  • I can't login tomy Adobe ID for After Effect CS6 Trial

    After Effects CS6 Trial won't let me login, it says i'm either not connected to the internet (which obviously, I am connected), or my computer time is incorrect (which i double checked already)....help?
    I'm currently in Shanghai, China, and my computer uses Window 7

    Change your System clock to PST (Pacific standard time) and then check.

  • My serial number will not work after using the trial, I purchased the software from Best Buy.

    Adobe Premiere Elements 11  I have uninstalled and reinstalled, but still will not accept serial number.  Please advise

    lindawhitssitt
    Please use the following link to reach Adobe Chat with your serial number issue. You should get immediate and effective resolution to your issue. After the link opens, click on "I still need more help." and the Adobe Chat pop up will appear.
    http://helpx.adobe.com/contact.html?product=premiere-elements&topic=serial-number-issues-o r-activating-my-product
    Please let us know the outcome.
    Thanks.
    ATR

  • Keyboard keeps switching to foreign keyboard after using diction/voice control

    Whenever I click the little mic button when typing in text (no matter in what application it is), my iPhone keeps switching it over to a foreign keyboard and I can only switch back by reopening the app or quitting the text frield and clicking it again. It is very annoying. I switched my keyboard to Kanji a while ago to test something out, but I turned off that keyboard right after I didn't need to use it, now it keeps switching back to it. Is there any way to fix this?

    I found the same problem. My (Australian) keyboard has { and [ on the same key. The shortcut for "History, Back" is cmd+[ . This conflicts with the shortcut cmd+{ , and going back takes priority it seems.
    What does work for me to shift between tabs (even though it doesn't show in the menu shortcuts) is:
    cmd + shift + { (to move tab to the left)
    cmd + shift + } (to move tab to the right)
    See if that works for you. Regards JD

  • Adobe Reader X - after using the spell checker words run together

    Hi,
    I am using Adove LiveCycle Designer ES 8.2 to design electronic forms that are filled out in Aobe Reader X. However, when the spell checker is used in Adobe Reader X, all the words that were corrected by the spell checker become one word. For example "Together is better" becomes "togetheris better." This is preventing my company from using electronic forms and I really want to convert my company to electronic forms. Does anyone know when the next version of reader will be available and if this will be fixed? Is there a workaround?
    Thanks

    Hi,
    This is the exact issue I am having. It would open then self terminate within seconds. I was suggested to un-install the program. Now I cant get any visual, and there is an error message. AAARRRGH! So frustrated.

  • I had to reload my InDesign 5 after using a trial version of Indesign5.5-now missing plug-ins

    I am unable to open any of my existing indesign projects after downloading my original  version of Indesign 5.
    It gives the message of missing plug-in's and says to upgrade to the latest version of adobe InDesign.
    How do i do this?
    These are the missing plugins's
    SharedContent.IndesignPlugin
    formfield.IndesignPlugin
    xml.IndesignPlugin
    generic page item.IndesignPlugin
    text.IndesignPlugin
    dynamicdocuments.IndesignPlugin
    hyperlinks.IndesignPlugin
    documentdFramework.IndesignPlugin
    geaphics.IndesignPlugin
    thanks

    It sounds like ytou saved all those projects in CS5.5. Those files are not backward compatible -- you need to export to .idml from 5.5 be able to open in CS5 (and there are still some potential Gotchas).

  • Just purchased lightroom 4 after using the trial version....

    ...... why does the product have to be sent to me by post? I mean why can I not just get the serial number when purchasing it which would be much faster, easier and also cheaper....why do I need the product on a disc etc.... I guess I will receive now a disc in some days but I guess I have to wait until I receive it?

    Looks like I got two separate emails, a confirmation and then the SN, but they came within moments of each other.  On the confirmation email I saw this:
    You can log back into 'My Adobe' in the future to re-download your product or retrieve your serial number. Please refer to the download policy for terms and conditions.
    http://www.adobe.com/go/ols_en_download_policy
    I downloaded mine, so you may not have that option, but perhaps it's worth checking it out. 
    Edit:
    I just went here:
    http://www.adobe.com/go/ols_ww_login/
    My LR purchase was listed, I clicked on it, and it shows me details of the purchase, including the SN.  Again, not sure if it'll work for you, but worth checking.

  • Should you turn off power switch to a charger after use?  Is it drawing much electricity?

    Is it safe to leave a iphone charged plugged into a wall socket and electricity switched on.  Will it draw much electricity and is the metal end of the cord live if you do so? My son does this and I would live to clarify safety concerns I have.  Thanks.

    Yes. It has an automatic shutoff once charging is complete. There are no real safety concerns anymore than there are leaving your TV plugged in.

  • Do I need to buy the full version of lightroom 4 after using the trial

    I am not sure if I purchase the full version or the upgrade

    If you have owned a previous qualifying version then you would purchase the upgrade.  If this is your first purchase of Lightroom then you would want to purchase the full version.

Maybe you are looking for

  • Unable to install BootCamp 3.1 on Windows 7

    Hello, I have had a MacBook for a long time now, it is an IntelCore2Duo. I have recently installed Windows 7 and the CD with the drivers included with the laptop only works for XP. I downloaded BootCamp 3.1 which, in theory, works with Windows' new O

  • Error in Broadcaster - An Active RFC Server could not be found

    Hi all, I am trying to broadcast a workbook to my mailbox through Information Broadcasting, i am trying this in BI 7.0 system.  In the Broadcasting wizard, I gave my mailid & the other required credentials.  But when i click on Schedule, i am getting

  • Updatable report error: "Error in mru internal routine: ORA-20001"

    Hi all, i have a updatable report with a Multi Row Update process. The report has 6 display column and 1 Select List column. When i try to save any changes, the application shows this error: "Error in mru internal routine: ORA-20001: Error in MRU: ro

  • Oracle Financials Functional Situational Interview Questions

    Hello Oracle Fin Brothers, For Oracle Financial Functional Consultant I am new in Oracle Financials, Just completed my training and I am having my first interview Thursday; the recruiter tell me the first step will be Situational Interview and I real

  • Price adjustment manually in FI module

    Hello Friends. Please guid me where we adjust the material prices in FI module and under what circumstances, and will there be any impact on MM module with this adjustment. Please reply to me as early as possible. With regards KRISHNA