Switching apps when using safari repaint issue

I can't seem to find whethere or not this has already been discussed in the forum. When using safari if I switch to an underlying app window that is covered by safari then sometimes the app window has the portion of safari that was over it painted onto the app. I have to minimize the app and restore it for it to repaint normally. This happens often if iTunes is behind the safari window and only sometimes on other apps.
I am using the latest nvidia drivers for 8x00 series cards. No other apps cause this problem with underlying windows.
Sorry for not explaining it clearly.
Thanks for any help.

It's up to Windows GUI to update your skin/theme/windows for your apps when you move windows around, and it will rely on your drivers.
The latest Nvidia drivers are beta drivers. Try the WHQL drivers.
Have you seen this on XP or Vista, or just Windows Server 2003?

Similar Messages

IOS Stop asking to install apps when using Safari?

HOW DO I STOP WEBSITES FROM ASKING (ANNOYING!!!) TO INSTALL APPS on Safari? As seen below...

It's up to Windows GUI to update your skin/theme/windows for your apps when you move windows around, and it will rely on your drivers.
The latest Nvidia drivers are beta drivers. Try the WHQL drivers.
Have you seen this on XP or Vista, or just Windows Server 2003?

TS1702 I installed ios6.0.1 in I pad mini. When using Safari, G mail, Facebook,Mail the Apps stalls for quite sometimes and application is no perfect as other Apps. I don't know it is the cause of new processor in ipad mini or ios 6.0.1.

I bought Apple I pad mini by on line on 28-10-2012 and my Shipment notification is W270720457. The serial no is DLXJN5F9F193. I installed ios6.0.1 and when using Safari, Facebook, G mail. Mail, icloud it hang sometime and cease. Very slow in using application Facebook and G mail comparing to my previous i pad 2 with ios5. I don't know its the new processor in i pad mini or i0s6.0.1. Please give suggestion what to do.

One suggestion would be to post in the iPad forum. This is the iPhone fourm.
D'oh!

Pasted image into gmail disappears when using Safari

Pasted image into gmail disappears when using Safari
I recently upgraded to Mavericks (after having a lot of seemingly unrelated trouble with my Macbook Pro (early 2011))
Since then, when I create a new message in gmail, and paste in a screen shot (captured with command-control-shift-4), the image shows up nicely. But after I hit send, the image disappears. It doesn't show up to the recipient, and when I look at my sent mail, it doesn't show up there either. There's nothing, no icon showing where the image should be, just empty space in the message. This seems to happen in Safari, but seems to works fine when creating the message in Chrome. (please, restrain yourself from telling me "Duh. Use Chrome." I know it's tempting, but my computer has some issues and Chrome doesn't always work.) If I create the same sort of message in Chrome, and then go to Safari gmail, I can see the image just fine. So it appears to be something about keeping the image attached to the content of the message while sending (vs. a viewing problem).
I know when Mavericks was installed, I had to install something in Safari for Adobe docs to show up again. Is there something I need to install so that images will stay attached to the content of gmail messages again?
Thanks

After you click Download (the attachment) from your Safari menu bar click Window / Downloads.
Right or control click the file in the Downloads window then click: Show in Finder
I'm not sure if you can designate another folder for downloading web based attachments to, however, instead of accessing your Gmail
account using Safari, you can set up the Gmail account from the Mail app on your hard drive. Mail preferences allow you to choose the
folder you want to use for downloaded files.
To add an account:
Choose File > Add Account or click the Add button in the Accounts pane of Mail preferences.
Enter information about the user.Mail searches for the information it needs to finish setting up your account. If it can’t find the information, continue to the next step.
Enter information about the incoming and outgoing mail servers, review the account summary, and then click Create.For information about options, click the Help button (looks like a question mark).If you don’t want the account to be active immediately, deselect the “Take account online” checkbox. You can take the account online later.
If you aren’t sure about the information to enter, contact your email service provider before you begin. When you talk with your provider, you can use the Mail settings “cheat sheet” available using the link below to record settings you might need to set up an account. If you’re switching from another application to Mail, use the cheat sheet to record information for each account you want to switch.

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Podcasts airplay streaming stutters when using safari. Worse on ios 7.

When streaming audio from the podcasts app on my iPad 4th gen to an AirPort Extreme using Airplay, the audio tends to block, stutter and freeze when using safari. Especially when safari is loading pages, the stream freezes for about 2/3 seconds.
I'm using an AirPort Extreme router.
Everything has the latest firmware.
Thanks.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this.

Proxy Password Disabled When Using Safari

I have been successfully using my iPad at work for the past 3 weeks. We utilize a proxy and I manually entered my credentials in the wi-fi settings. Each time Safari opened, I was still required to enter my proxy credentials. Annoying, but not a big deal...
Last week I was required to change my password. After my password was changed, I immediately went to my iPad and also updated my credentials. When I opened Safari it requested by credentials, I typed in my new password and my 1st page loaded. I went to another page and was immediatly asked for my credentials again. I entered them, and was prompted over and over again for my credentials... It ended up that my user profile had been disabled.
This only occurs when using Safari. I can use the mail app and app store without issue. Once I log in to Safari, my profile is disabled.
I have tried clearing Safari's cace, passwords, & history. But nothing seems to help.
Has anyone else seen this?
Thanks!
Mike

niall1111 wrote:
It is,and always was, the return key that did this in snow leopard and other operating systems!
??? I have two Macs that can run Snow Leopard & in neither of them does the return key take me back a page. Also, nowhere in the lists of keyboard shortcuts for OS X or any of the browsers I use (Safari, Firefox, & Chrome) is the return key mentioned as providing this shortcut.
Some web pages may have been programmed to respond to the return key that way, but not many I have ever encountered are. I guess it is possible some extension or other third party add-on might provide that function, but itis definitely not something that has ever been built into OS X or any of the common browsers used with it.
In Safari (on Snow Leopard, Lion, Mountain Lion, & Mavericks) two keyboard shortcuts are provided by default to go back a page: one is the CMD-[ combination Barney already mentioned. The other is CMD + the left cursor key. Likewise, CMD+] or CMD + the right cursor key will take you forward a page (if you have previously gone back to a previous page).

QuickTime Content Does Not Load When Using Safari

For the past week or so, I've noticed that when using Safari, any QuickTime content fails to display, but instead, the QuickTime logo is displayed with a question mark in the center. That would indicate to me that Safari is not seeing that QuickTime is installed, but of course, it is. I tried actually reinstalling QuickTime, but that did not resolve the issue.
Again, this has only started in the last week or so. I'm new to the MAC world, so my troubleshooting skills are more limited with OSX. I also have Firefox installed, and QuickTime content opens as normal when using Firefox.
Any help would be appreciated. Thanks.
iMac (Intel) Mac OS X (10.4.7)

I have had the same problem for some time now. As well as this problem, some QT movies load into QT but the sound does not play.
This all started when I loaded various other players such as VLC to run Windows Media Player stuff before Flip 4 Mac became universal. I have tried dumping prefs, turning off plug ins and a dozen other things between QT and Safari, including resetting Safarai and losing all my log ins etc.
Nothing runs on say www.youtube.com We just get the big Q with a question mark over it. The keynote address released yesterday does not play with sound.
I suggest we all look back and list what we did/installed just before the problem started and then we can compare and look for a common element.
As to checking "block pop ups" I never had that on to begin with.
We need to see if the problem is in Safari or Quicktime - or both. There are too many variables at the moment to narrow down the problem.
Our other iMac which is identical does NOT have the problem - because I didn't try to load any other software on to it.

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

See if the following help.
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Turning off iCloud and multitasking gestures on the iPad might also help.

No Data retrieved with AJAX Call HTMLDB_GET when using Safari Browser

In my apex (4.0) app i have certain page a which uses JS AJAX htmldb_get to pull some data from an on-demand process using xml structure
var get = new htmldb_Get(null, $v('pFlowId'),
'APPLICATION_PROCESS=get_markerdata', $v('pFlowStepId'));
if (!MEBMarkerdataXML) {// Tabelle mit Kunden leer? Dann aus DB abfragen
MEBMarkerdataXML = get.get('XML');
l_Count = MEBMarkerdataXML.getElementsByTagName("Kunde").length;
I ran into a strange behavior when using Safari Browser (Mac and Windows) when opening the page.
As long as the process retrieves less than 50 rows everything works fine. The data is pulled from the OnDemand Process and delivered to the browser; the XML Data can be selected in JS for further processing
<<<<<<<<<<<<<< HTTP Traffic taken from Safari <<<<<<<<<<<<<<<
Anfrage-URL:http://80.149.218.10:8080/apex/wwv_flow.show
Anfragemethode:POST
Status-Code:200 OK
Anfrage
Content-Type:application/x-www-form-urlencoded
Origin:http://80.149.218.10:8080
Referer:http://80.149.218.10:8080/apex/f?p=41107101:43:1599514482232751::
User-Agent:Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3
Formulardaten
p_request:APPLICATION_PROCESS=get_markerdata
p_instance:1599514482232751
p_flow_id:41107101
p_flow_step_id:43
Antwort
Cache-Control:no-cache
Content-Type:text/xml;charset=UTF-8
Date:Thu, 03 May 2012 10:19:35 GMT
Pragma:no-cache
Server:Apache-Coyote/1.1
Transfer-Encoding:Identity
X-DB-Content-length:53329
X-ORACLE-IGNORE:IGNORE, IGNORE, IGNORE, IGNORE
<<<<<<<<<<<<<<<<
When calling for more then 50 rows Safaris shows a POST Error -1001 and no Data is delivered.
This occurs only on some Mac's and my Dev WIN-XP PC using SF Browser; never on iPad/iPhone . Never when using FF on Mac or PC.
I googled a lot of different Sources, it seems to be a Timeout Problem when making a long runing AJAX Call. But i did not find any useful hint.
Any Ideas from the APEX & HTTP Gurus?
Regards
Peter

It's just that in my experience htmldb_Get.get() is troublesome for browsers, due to the fact it performs a synchronous request. The browser can do nothing else while it waits for the response. I've seen Firefox really struggle with it in the past couple years. Also, I've seen no good reason to use synchronous XMLHttpRequest calls. As you can see, it's simple to refactor a call to htmldb_Get.get() into a call to htmldb_Get.GetAsync().
For your case in particular, I was just guessing Safari have implemented a timeout to ensure that they don't end up waiting indefinitely for a request that never returns as this would be fatal. You're probably hitting that timeout.
I don't think htmldb_Get is officially documented anywhere, but you can find the source here... http://apex.oracle.com/i/javascript/uncompressed/apex_4_0.js
There is also a pure jQuery way to perform AJAX request, I recommend using this because at least it's documented. Here's a snippet of a typical APEX AJAX request done the jQuery way:
apex.jQuery.ajax({
dataType: "xml", //supports text, xml, json, jsonp, script, or html
type: "post",
url: "wwv_flow.show",
traditional: true,
data: {
    p_request: "APPLICATION_PROCESS=get_markerdata",
    p_flow_id: $("#pFlowId").val(),
    p_flow_step_id: $("#pFlowStepId").val(),
    p_instance: $("#pInstance").val()
success: function (data, textStatus, jqXHR) {
    // Do your thing in here
error: function (xhr, ajaxOptions, thrownError) {
    // Handle error in here
});Then you can refer to great documentation here... http://api.jquery.com/jQuery.ajax/

Why does my phone direct me to the william hill app when browsing safari?

why does my phone direct me to the william hill app when browsing safari?

It's an advert from a (dodgy) website. Some advertisers use these rather unscrupulous ads.
All you can do to avoid such obtrusive advertising is to stop using the websites that do it. Maybe then they'll learn not to be so blatant.

Why does my iMac screen flicker only when using Safari? It doesn't happen with Firefox.

Yesterday, I had an issue with OS X, causing my screen to go black upon waking up my pc. Come to find out through the Apple Forum, that when the OS X was originally installed, it was not a complete install. Once I received the fix solution, completing the OS X install, (10.9.3) everything was back to normal, so it seemed.
Now, when using Safari, the whole page flickers and so forth, including the address bar. I never had problems with the screen prior to this. Also, it doe not occur when using Firefox.
Is there a fix for this? or an adjustment that can be made. This never happened prior to the OS X install, which was about 2 months ago.

Troubleshoot Safari extensions ..
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

In Firefox (latest version) on Craigslist the text font is a very funky super bold angular font I can barely read. When using safari it's ok using times. is this a firefox problem?

In Firefox (latest version) on Craigslist the text font is a very funky super bold angular font I can barely read. When using safari it's ok using times. is this a firefox problem?

You can do a check for corrupted and duplicate fonts and other font issues:
*http://www.thexlab.com/faqs/multipleappsquit.html - Font Book 2.0 Help: Checking for damaged fonts
*http://www.creativetechs.com/iq/garbled_fonts_troubleshooting_guide.html

Cannot print anything when using safari

Cannot print anything when using safari. OSX is Mavericks. Printer is Canon MP620. Have downloaded Mavericks software for printer, but still will not print. I have also repaired the disk hoping that would solve the problem, but to no avail. Can anyone help me please?

Hey ivorfromborehamwood,
Thanks for using Apple Support Communities.
For more information, take a look at:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Have a nice day,
Mario

Switching apps when using safari repaint issue

Similar Messages

Maybe you are looking for