Switching audio between front and back speake

I have an audigy 2. I was wondering if there was a quick setting you could change back and forth that would make the 2 back speakers the front speakers and the front speakers the back speakers.

Not familiar with the iMac, I'm afraid - if that's what you have - you could check here
http://discussions.apple.com/category.jspa?categoryID=132
but as far as the [Power Mac] G5 is concerned...
Not as far as I am aware. If you explain what you are trying to do, perhaps someone will know another way of achieving it.

Similar Messages

  • Difference between front and back camera on iphone 4s

    want to know the difference between the front and back camera on my new iphone 4s the pictures don't look the same the back camera seems to take a better picture than the one facing me.

    Back camera is 8 mega pixels and allows more light. Front cam is not different.

  • Switching audio between jack on back and jack on front

    hey all, kind of a minor-importance question here, but just wondering... i know there's apps and menu bar items that allow you to switch between, say, line out and usb audio, but is there any way to switch sending audio from the line out in the back of the machine to the front and vice versa so that only one is outputting?
    thx!
    20"2GHz iMacG5; 15"1.5GHzPowerbook;AirportExpress;WacomIntuos3;MotorolaRAZR.   Mac OS X (10.4.4)   TiVoSer.2;WestinghouseHDTV;iSight;iPod5G,Nano,Shuffle;Vonage;LaCieLightScribe.

    Not familiar with the iMac, I'm afraid - if that's what you have - you could check here
    http://discussions.apple.com/category.jspa?categoryID=132
    but as far as the [Power Mac] G5 is concerned...
    Not as far as I am aware. If you explain what you are trying to do, perhaps someone will know another way of achieving it.

  • Possible to change the front and back speaker volume ?

    Hello, as it says in the topic, i was wondering if it is possible to change the volume of the front and the back speakers (the same way it is possible to change the volume of the center speaker).
    If anyone could tell me wether this is possible at all i would largely appreciate.
    Specs:
    Creative Inspire T5900 speaker system
    Creative SoundBlaster Live! 5.1 Digital
    Windows XP

    The older Mac Pros had a separate board for the front panel connectors. Looking at pictures of the 2009 Mac Pro back-plane board I can't see any soldered on connectors. Based on the link below for an older Mac Pro it looks like it could be as easy as making a cable to replace the front panel board USB cable with one that could connect to a USB PCIe card (when they are available for Macs).
    http://ep.yimg.com/ca/I/lovemacs2113427757506
    Edit: Assuming that there is no additional circuitry on the front panel board that has to be USB3 compliant.
    Edit (again): I missed the fact that USB3 uses a different connector so you would have to replace the entire board with one that has USB3 connectors on it. It is unlikely Apple or even a third party would make one.
    Message was edited by: Martin Pace
    Message was edited by: Martin Pace

  • Does the 1 year warranty cover a crack between the front and back casing?

    Does the 1 year warranty cover a crack between the front and back casing?

    No, I don't think so if it's through mishandling.

  • How to print page in front and back in scripts

    hi,
    I want to know to know the how to print a page in front and back.

    HI Ragavendra
    set this
    <b>Print mode is D</b>
    With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
    <b>D </b>The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
    and other Print mode options are
    <b>Print mode</b>
    With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
    <b>' '</b> Currently active printing mode continues unchanged.
    <b>S </b>The page is printed in simplex mode. That is, the printer should print on only one side of the paper. If another mode was previously active, then the printer is switched to simplex mode with the start of the page.
    <b>D</b> The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
    <b>T </b>The page is printed on the first side of a sheet in tumble duplex mode. That is, the printer prints on both sides. The page on the second side is always inverted, so that the footer of the second page is printed opposite the header of the first page.
    If another mode was previously active, then the printer is switched to tumble duplex mode with the start of the page and continues printing in this mode.
    Print modes are currently supported for printers that use the PCL-5 language. These are printers that are defined with the following SAP device types: HPLJ_II, HPLJIIID, HPLJ4, LX4039, SNI20XX8.
    See the spool system (transaction SPAD) to check on how your printers are defined.
    The print controls for these functions are SPMSI (begin simplex printing); SPMDU (begin duplex printing); SPMTU (begin tumble duplex printing); SPMFS (print on first side of sheet in duplex or tumble duplex mode); and SPMBS (print on second side of sheet in duplex or tumble duplex mode).
    Regards Rk

  • Creating a web based book publication with front and back covers

    I have created a book in Indesign which is 12 pages inclusive of front and back covers, the problem I'm having is that when I convert the file into an SWF file the front cover has an extra page to the left of it and the back cover has an extra page to the right of it (these pages are not in my Indesign layots) I don't want these pages as I want the document to look like a book when I send it out.  I'm assuming I haven't set the document up correctly?  I have been on a number of tutorials but none of them seem to go into this.  Some pointers would be really helpful.
    Thank you.

    You can do this in Elements. It will require planning for the layout, viz. height, and width of front & back covers, and space allocation in between for the spine area. Be sure that your printer can handle the document size.Once you have figured this out, you need to open a new, blank file of appropriate size and resolution.
    There is available a grid which I find very helpful  to facilitate alignment.
    Each of your pictures, and the blank file (#1 above), should have a resolution of 240--300px/in for good result with printing.
    The text can be produced with the type tool - optionally horizontal or vertical.
    The pictures and text will each be on their own layers, and the move tool can be used to position these components

  • How to change the capture resolution of CaptureDevice and toggle between front and rear camera

    Hi. I'm using Visual Studio 2013, and the Windows Phone App template. I'm using the Microsoft.Devices / CaptureVideo API to capture video. I now want to set the resolution to capture the video in a specific(available) resolution. How do I do that?
    Code snippet reference to API:
    CaptureVideo vcDevice = CaptureDeviceConfiguration.GetDefaultVideoCaptureDevice();
    and I also want to put a button there to toggle between front and rear camera. If I click the button, and the rear camera is currently active, the front camera must become active and vice versa. How do I do that with this API?
    Thank you.

    visit this page to know how.
    http://stackoverflow.com/questions/25466088/how-to-switch-to-front-camera-in-windows-phone-8-1-winrt-jupiter

  • Still waiting on Apple to come up with front and back camera for laptop.

    The Ipad, Iphone and Ipod have front and back camera.  Why can't the laptops have front and back camera? I have a mac pro and it would be great if I don't always have to turn the laptop for people to see what I'm trying to show them. 

    You would like to be looking at something while using facetime (for
    example) and switch over to a different camera while continuing the
    conversation without moving the computer.  That way you could see what
    you are showing them without having to look sideways at the display.
    So basically he wants a rear view camera.
    There is a issue with this because computers are stationary and thus the rear view camera could be used as a covert monitoring device.
    At least with a iPod or iPhone when someone holds it a certain way you know they are taking a video or picture, with a desktop/laptop one wouldn't know.
    For instance say your a pretty girl in coffee shop using your laptop, so now instead of a bunch of rabid geeks trying to catch your eye you have all their laptop rear view cameras pointed at your direction and streaming it online.
    Creepy.
    If one wants a rear view camera, buy a third party one and mount it on the top. It comes with a swivel base and thus can be pointed at any direction. Thus people can see your video recording and it's not covert.
    A rear mounted camera requires the entire Mac to be moved, which in the case of a large iMac is impracticable. Laptops being moved increasing their chances of being damaged, even more so if they have hard drives.
    Also there are laws about covert video recording/taping in many States and countries, you have to do so with the persons consent so things are not taken out of context.
    I'll have to vote no on this, especially since not many people will use it and we will all have to pay for it.

  • Setting up SSO between EP and back-end SAP systems

    Can anybody give me some insight about setting up SSO between EP and back-end SAP systems. If possible some links to write up would be great.
    Thanu

    Hi,
    This link gives you a detailed information on setting up SSO : http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
    Some How-guides:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/77378b3d-0b01-0010-ffa5-c6941e286c43
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
    Regards,
    Sunil

  • Role mapping between Portal and Back end systems

    I am new to SAP EP.
    I just want to know how the mapping between portal and back end system happens.
    Scenario : There is a role in ECC system...say FI India. Now there is a request by the FI team that they want to access this role from Portal. In this case, please tell me how the security team will do it. Because I guess, it has to be done by the security team.

    Hi,
    Usually the role from backend is uploaded to portal then it will be seen as Group and we need to assign our portal roles to this group. Please refer [this|http://help.sap.com/saphelp_nw73/helpdata/en/d6/7859ec80df46738e23ccb4f4c8c502/content.htm].
    Regards,
    Samir

  • How do I print front and back with two pages per sheet? (OSX Lion)

    I can't find a simple solution to my situation...
    I'm using Max OSX Lion 10.7.3 and Adobe Reader X 10.1.2. 
    I want print two PDF pages onto one printed sheet, and I want to print front and back.  When I go to the print settings and select two pages per printed sheet, the sample window shows me what I'm looking for.  But when I tell it to print odd only or even only, it changes the print selection.  Here's what happens...
    Let's say I have a PDF document that is 20 pages long.  When I tell it to print two PDF pages per sheet, it shows me that the first pages printed will be PDF pages 1 and 2.  When I tell it that I want it to print odd pages only, it tells me that the first printed page will contain PDF pages 1 and 3.
    In other words, Adobe Reader wants to print the odd PDF pages instead of the odd pages of the printed document (PDF pages 1 and 2, then 5 and 6, then 9 and 10, so on).
    So that I'm being clear...
    This [  ] is a printed page.  The numbers inside the brackets represent the page numbers in the PDF document...
    What I want to print is this...
      FRONT   ||  BACK
    [1,2]    ||  [3,4]
    [5,6]    ||  [7,8]
    [9,10]   ||  [11,12]
    [13,14]  ||  [15,16]
      [17,18]  ||  [19,20]
    What would end up printing is this...
      FRONT   ||  BACK
      [1,3]    ||  [2,4]
      [5,7]    ||  [6,8]
      [9,11]   ||  [10,12]
      [13,15]  ||  [14,16]
      [17,19]  ||  [18,20]
    Aside from telling it exactly which PDF page numbers to print (this would be a taxing job because I'm working with a 273 page document), is there an easy and simple way to print how I'd like?

    I would suggest to use Adobe Ilustrator. Also I get an error message when I try tp access the sample document.
    You can download Illustrator using Adobe Creative download - http://www.adobe.com/products/illustrator.html
    ~Deepak

  • I have an iphone 4 . A new screen has been fitted front and back. It suffered a bit of a bang. Now when the phone is turned on the apple logo appears but nothing more  . Could there be a problem elsewhere ? Other than smashed screen? Any ideas welcome

    I have an iphone 4 . It's had a new front and back screen fitted after a bit of a bang . Now when turned on the apple logo appears on the screen and then goes off. Then appears again etc etc etc .
    It won't go any further . Any ideas as to what else may be an issue or has anyone else had the same problem and what was the outcome . If I back up to iTunes will I be able to back up my information without any activity showing on the screen !! I'm lost without all my information . I haven't backed up to iCloud for at least 5 months. Can anyone help me PLEASE?????

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • Front and back inside covers?

    I just submitted my first book to be printed. I am concerned that the pages will not come out correctly, in as far as odd-even. In the iphoto book, the system automatically puts an inside cover at the beginning and at the end allowing those pages to print double sided for the front and back cover. However, when the pdf file is generated and viewed, no blank pages are created for this purpose. When the book gets printed, does the Apple printer allow for this? Will my odd pages start as odd or come out even as they did in the pdf file?

    RG:
    As I recall (all of my books were given away as gifts so I don't have them handy for reference) the odd pages did come out on the right with the even on the left as they should be.

  • HP Laserjet 4P has a 1" toner stain that runs down the left side of page.(front and back)

    Hello all,
    This is my first post here and I hope someone can help me. 
    We have a HP Laserjet 4P that we have used for a few years and recently have had a problem of a 1" toner stain that runs down the left side of the printed page(both front and back side). I have replaced the cartride and cleaned everything I know to clean. When I remove the cartridge, there is a little pile of toner on the left side just in front of the horizontal silver bar that is behind the roller. I have cleaned it up several times. Each time I try to print, The toner stain appears on the printed page again and leaves a new pile of toner in the same place.
    Does anyone have any experience with this problem? I am not sure if it is a worn part or a maintenance issue.
    Thanks in advance for any help.
    Fish

    Hi ProspeorusCE,
    The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Maybe you are looking for