Switching Backend System

Hello everybody
We've setup SRM 4.0 with SRM Server 5.0 SP08 and CCM 2.0 SP03 on a development/customizing machine called DIM. We connected it to temporary devel./customizing SAP R/3 4.7 backend system called RIS.
Why a temporary devel./customizing backend system? Well, that's a complete other story...
However, we now have to change this connection to the definitive devel./customizing SAP R/3 4.7 backend system.
The problem / question is: after having changed all customizing settings (changed logical and/or RFC destinations everywhere) we are able to replicate DNL_CUST_BASIS3, DNL_CUST_PROD0 but not DNL_CUST_PROD1 from the new backend system.
In R3AM1 it hangs with a yellow status, in SMQ2 it stays in the inbound queue with an error message ":COM_PRODUCT_CUSTMSG:028 R3PRODHIER RISCLNT200".
RISCLNT200 is the logical system name of the old backend system.
Is this error message araising because we already replicated from this (old) backend system? Does anybody out there know this issue? Anyone having a solution to it?
Other question:
Is it somehow possible to wipe out all repliacated data (hierarchies, categories, material, ...) from an SRM server instance without having to reinstall everything from scratch? We're still on development/customizing level and not in production yet!
Thanks in advance for some help. Would be happy to reward with points!
Renaud
EDIT: looking at COMM_HIERARCHY I can see that the product categories were replicated. Any ideas, why I get above error in the inbound queue SMQ2 then?
Message was edited by: Renaud Desarzens

Hi Christophe
Thanks for the tip. Just tried it out, went to COMM_PRAPPLCAT and deleted the entry with application 01 and its assigned hierarchy id (R3PRODHIER). Then went to the pending queue entry in SMQ2 and restarted it.
Now the system returns another error in the inbound queue (SMQ2). It tells me that the hierarchy id R3PRODHIER already exists.
Tried to delete it in COMM_HIERARCHY but of course the system says it may only be maintained in the backend system. This backend system is no more of interest for us. We want to replace it by another one.
What else can I do? Is there a way to wipe out all replicated hierarchies and all products just to be able to redo an initial replication from a new (NOT additional!!!) backend system?
BTW: In the actual R3MATCLASS hierarchy I have some categories from our old backend system and some additional new ones from the new backend system. How can I make sure to have only categories from 1, the new one, backend system?
I'm kind of lost here...
Best regards,
Renaud

Similar Messages

Connect to a backend system with the BI connector via Visual Composer

Hi all,
I set up a system landscape on my notebook with the NW2004s ABAP as NSP and with the NW2004s JAVA SP7 as J2E. Both systems are integrated in the SLD, this is set up. Furthermore I installed a BI system alias as NSP_XMLA in the portal with the URL for the backend system: http://localhost:8000/sap/bw/xml/soap/xmla.
I have the same user on portal and backend system NSP. Both have admin previleges.
When I try to logon to the backend system with this URL I get this error:
"No switch to HTTPS occurred, so it is not secure to send a password"
" Choose "Logon" to continue A dialog box appears in which you can enter your user and password"
Then I can logon to the server and get a lot of XML.
But I have to manually logon to the system.
From the portal I cannot logon to the backend system with the test function. I get the error:
Alias is found, but connection failed.
I guess there must be an automatic logon preconfigured.
How can I do this?
Is SSO necessary?
thanks for any help

Hi Gregor,
thanks for your answer, which was intersting but could not solve the problem. In the meantime I discoverd the reason for it.
You have to insert the connection URL to the BW system at 2 points in the system.
1. You have to configure the XMLA connector with the Visual Administrator.
2. You must implement a system in the portal where you configure all necessary information, also the URL to the BW system.
This seems somewhat strange to me because you will then not be able to connect with two or more BW systems to the portal and VC what is centainly necessary in a real world scenario. Anyway I can now see all Infoproviders of the BW system in the VC, and SSO isn't necessary because you configure the information to login to the BW system directly in the configuration of the XMLA connector in Visual Administrator.

Syndication of merged records to multiple backend systems (MDM 7.1)

Hi all,
I have setup an MDM scenario with >1 ECC systems connected to MDM via PI. Everything works fine in terms of end-to-end process from ECC to MDM or MDM to ECC (creation, update, syndication). I have also merged records in MDM from the same backend system and am able to see the remote key information under 'edit key mappings' and when I update the merged records in mdm the data is olso updated in ECC.
BUT the update in ECC does not work for merged records where the keys are from different backend systems.
Example:
Remote system: RS1 and RS2
I have merged two records, one from RS1 and the other from RS2. The newly created record has two key mappings (RS1/RS2). Also the newly created record shows - let's say - RS1 in MDM and the the RS2 informaion is attached as remote system information. When modifying the record in MDM, only RS1 is updated but not RS2.
Remote Systems RS1 and RS2 are set up in the Cosole. Also I have setup a port for each remote system. Syndication in general works perfectly without any problem. I know that I have to trigger syndication for each port but still does not work. Any ideas?
Thanks!!!
BR,
Erdal
P.S. I am using MDM 7.1

Hi Erdal,
OK, I assumed a setup like this.
> in 5.5 there was "Output Remote Systems" whereas in 7.1 we don't have
You have this one in 7.1, too. "Output Remote Systems" was renamed to "Remote Key Override". I don't know why, but the functionality is exactly the same.
> "Supress Unchange Records" is checked
This explains the behaviour that you are facing. "Supress Unchanged Records" is used to distribute only these records that have been changed. What happens inside MDM is the following.
MDM Server creates kind of a change pointer for the changed record AND for each remote system that record belongs to:
Imagine you have a record A with a key for RS1 and RS2 each. You change this record. MDS creates two change pointers A-RS1 and A-RS2.
Now you switch to Syndicator and distribute the records with the port for RS1, but with "Remote Key Override" for both RS1 and RS2. Syndicator creates a single message and includes both the remote keys for RS1 and RS2. Furthermore it deletes BOTH change pointers A-RS1 and A-RS2 as the record was distributed for BOTH systems!
If you then connect with Syndicator to the port for RS2 and start the syndication, Syndicator cannot find any change pointers and thus won't create a message.
If you want to send the golden record to different systems, I'd suggest to add each system to MDM Console. Create a syndication map & port FOR EACH system. Within the map use the target system only as "Remote Key Override". Use "Supress Records without key" to exclude those records, that do not have a remote key for the target system. Use "Supress unchanged records" if you want to distribute only the changed records.
If you need a message having all keys of all systems (e.g. to update a BI system with grouping information), create a specific remote system for this purpose. Create a map & port, the map shall now use the "Remote Key Override" for all systems. The "Supress" settings can be made as above, but especially for BI we're recommending to syndicate always all records (do not "Supress unchanged records").
Best regards
Michael

JCo Scenario with multiple Backend Systems

Hello @ all,
Is it possible to use multiple Jco destinations to multiple Backendsystems in one WD application?
The scenario is as following: I want to call different function modules on different SAP Backend systems?

Hi Mehmet
Alternatively you could try switching the destination through URL parameters
http://<Host-Name>:<Port-Nummer>/webdynpro/dispatcher/local/Example_Project/Example?sap-wd-arfc-useSys= WD_MODELDATA_DEST:SyB&sap-wd-arfc-useSys=WD_RFC_METADATA_DEST:
SyB
Check this link (I havent tried it though)
http://help.sap.com/saphelp_nw04/helpdata/en/f4/651741f163f023e10000000a155106/frameset.htm
Regards
Pran

One adaptive RFC Model and Multi Backend System.

Hi All,
I am trying to fetch data from multi backend system by using an adaptive RFC model.
It is not tidy to create multi model for a RFC function to fetch data from multi SAP system, because we have dozens of SAP systems.(over 40)
So, I would like to switch to multiple SAP systems with an adaptive RFC model at runtime.
1 model(Same Function) -
> System A
> System B
> System C
Is there any sample or tutorial about this sort of senario?
Thanks in advance.
Message was edited by: JeongEog IM
Message was edited by: JeongEog IM

JeongEog,
You may use SAP java Connector for doing that. Refer the following links for the step-by-step approach.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/561106b8b3bc449f890cddfdc8d3e2/content.htm">Example program 1</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/eedf3d0eb8af5ee10000000a114084/content.htm">Open Connection</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/24/efdf3d0eb8af5ee10000000a114084/content.htm">Calling a Function and Closing a Connection</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/14e13d8ee4535ee10000000a114084/content.htm">Example program 2</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/bc/eedf3d0eb8af5ee10000000a114084/content.htm">Connection Pool</a>
Bala

AE 5.2: Roles get provisioned to backend system but profiles randomly not

Hi,
we are currently switching from profiles to roles and therefore created user request containing the roles to be assigned and the profiles to be removed. The roles are assigned successfully to the user but the some profiles are not removed randomly. The backend user used by AE has the correct authorizations.
Had anybody such a problem before?
Thank you for your answers
Marco

Hi Hersh,
we did a user role comparison several times before and users had the profiles already for a period of time. Also the request get submitted radomly meaning we can't monitor all the requests because the last approvers approve the request sometime and the the request gets provisioned. Further, AE should provide any message in such a case.
Could it be if the user to be changed is logged on to the system that such a scenario could happen.But when changing user authorization in the backend system itself this doesn't have any impact and this also applies for the GRC backend user.
Regards.
Marco

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

Error while reading PO in backend system Inform system adiministrator

Hi All,
I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
Also I could not find any logs in RZ20 nor a dump.
When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
I am on SRM version BBPCRM 4.0 SAPKU40007
R/3 version 4.6 C SAPKH46C47
Thanks in advance,
Rgrds,
Raj
Message was edited by:
Raj Malhotra

Hi
Have you tried out this ?
There are two BADIs which might help you in achieving the job.
BBP_EXTLOCALPO_BADI [Control Extended Classic Scenario ]
and
BBP_GROUP_LOC_PO
[Exit Grouping of Items for Local Purchase Orders]
Read the documenatation first, using transaction - SE18
before implementing them for your requirement.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Error while reading the PO in the Backend system   !

Hi all,
We are working on SRM 5.0(SP12) and Extended classic scenario.
The problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" .
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
In RZ20,i find the log:
The error ocurred by processing event SENT_AGAIN with GUID 490F3C0834351AC6E10000000AE48838 and object_id= 3000000307
The R/3 System Version is 4.6C.
Any help is highly appreciated.

Hi,
Thanks for the response.
This problem is hapeening for all PO's in the system.
The no range is smae in both the systems.In SPRO ,howevre we have not maintained the no range in SRM for R/3 system.
Here is the config details:
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Number Ranges>SRM Server Number Ranges-->Define Number Range for Local Purchase Orders
EC     3000000000     3999999999     3000000320
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Number Ranges>SRM Server Number Ranges-->Define Number Ranges per Backend System for Follow-on Documents
SAPE02_050     EC            RS
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings-->
Define Transaction Types
ECDP     PO: Direct Material     03     02
ECPO     Purchase Order     EC
I have already gone thorugh note Note 1258634 - Certain events cannot be de-activated.
This note is however valid for SRM 6 and 7.
PO is not reaching R/3 system.
No error in sm58/sm12.
The status in BBP_PD for the PO is :
Stats:
           Status         Description                    Inact
HEADER     I1009          Held                           X
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1043          Ordered
HEADER     I1080          In Transfer to Execution Syst. X
HEADER     I1180          Document Completed
Awaiting your inputs.

Error while posting return delivery to backend system

Hi All,
We are facing problem when we are posting return delivery. Currently we are in ECS implementation. Our SRM is 7.0 EHP3.
Scenario goes as, SC is created then PO is created then further confirmation is created and on creating return delivery of this confirmation, this return delivery goes error in process.
Now on further analyzing, I found out that outbound IDoc in SRM is getting posted successfully but when ECC receives this IDoc it is saying please enter reason for movement 122. This reason for return is already entered while creating the return delivery. But this reason is not flowing in IDoc (Message Type MBGMCR and Basic Type MBGMCR01) in SRM and further to ECC. This field MOVE_REAS in IDoc is populating blank.
Can anybody help me resolving this problem? Any pointers or SAP notes related to can also be suggested.
Thanks
Siddarth

Hi Siddarth,
Please implement the note below, which is included in SP05.
2007628 - Return delivery cannot be posted in backend system as reason for return delivery is empty
Regards,
Wendy

Unable to create a PO(in backend system) in ECS

Hello all,
I used the FM BBP_PD_SC_CREATE, BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE to create a shopping cart in ECS scenario.
The problem is I am unable to create a PO in the backend system for the shopping cart. I am also getting the message 'Vendor 3000014598 not intended for purch. org. Ref: MM Purchasing Org'.
Please help me in this context.
Thanks,
Vishnu

Hi,
The problem with organization structure , Please check your organizaiton structure.
Change company code /Pur.org Separatlly it will work.
while replicating vendor please select the flag 'with out reference to back end pur.org' and choose local purchasing organization.
refer this link
Vendor xxxxxxx not intended for purch. org. xxxx Purchasing Organization
Thanks
prasad .s

How to find out Shopping Cart created in backend system or ECC system

Hi All,
I am new to SAP SRM7.0. The Client has implemented "Extended Classic Scenario". i.e. SC>Approval>PO>Confirmation>Invoice process in ECC.
We created few SC with "Free text" i.e. Describe what you need option in SC.
The SC is created with 4 digit number 2690. Also, the Status " Approved". since its low value.say 5 GBP.
I have like 25 to 30 SC created like this: I need to know the following:-
1. When i open SC and look for Related document, i see only SC number , but no Follow on document. not sure why ?
2. How can i know the list of SC in backend system. i.e like ECC of the SRM backend system. Please let me know the table name it get stored.. I searched EBAN and found only those which has PO is stored.
also can you please advise if by creating the SC in SRM.. will get replicated in ECC system ?. or only if Follow on doc gets created it will get replicated in ECC system?.
Thx
MJ

Hi,
SC is never replicated to backend.
Extended scenario document flow is SC -> SRM PO(Main) -> ERP PO(Copy).
Please go to BBP_PD transaction and navigate to SC item detail. You see what is the follow-on document.
Regards,
Masa

Automitic source of supply assignment in backend system for SRM

Hello Experts,
I am facing one issue regarding source of supply for SRM purchase Requisitions in backend ECC system.
When we create a shopping cart in SRM 5.0, a purchase requisition is created in backend and has source of supply assigned to it.
I donu2019t want to assign source of supply to purchase requisitions created for SRM.
Can you please suggest how to achieve this?
Also I think, SRM is internally using BAPI u201CBAPI_REQUISITION_CREATEu201D from backend ECC system for creation of requisition. This BAPI has an importing parameter u2018AUTOMATIC_SOURCEu2019, and if we pass space to this parameter, it creates requisition without assigning source of supply.
If this is correct, then can I use any BADI or customization in SRM to set the value of this parameter as space when SRM calls this BAPI?
Thanks in Advance.
Thanks and Regards,
Sanjay

SPRO--> SRM > SRM server> cross application basic settings --> Define objects in backend system (PR,RS,PO)
waht is the settings you maintained for your product category / purchase group - external procurement .
the above setting determines your follow on documents in the backend systems.
as discuused in the thread are you using any BADI ?
Unable to create PO in backend system for a text material in Shopping cart
peter offers how to debug to ..in the above link.
br
muthu

Goods Receipt not transferred to the Backend System R/3

We are currently using BBPCRM4.0 & SAP R/3 4.7 (extended scenario)
For a particular Purchase Order which has a material number, We cannot transfer GR to the Backend System R/3 successfully.(The shopping cart of unsuccessfully transferred GR is created by using material)
When I check R/3 using WE05, I can find the message "The plant data of the material G09002202 is locked by the user MRP_RFC". This must be the reason why GR is not transferred successfully to the Backend System, but I do not know what this message mean.(As you see, MRP_RFC is the user name that connects SRM and R/3. + That moment the material is not locked by any user in R/3)
If we try to create the GR document again in SRM, the message "Item is already being processed" is shown, so cannot make BUS2203 Docs.
To sort out this, we remove the GR Transfer Error Information in
BBP_DOCUMENT_TAB.
After removing the information of this error in BBP_DOCUMENT_TAB, surprisingly we can make GR successfully.
Weird!.
Only for a particular PO which has a material, but not everytime.
Sometimes this problem happens.
At the first time, it doesn't work, but after removing the data from BBP_DOCUMENT_TAB, when we try GR again it works.
Could you help me why this symptom happends..?
Edited by: Hyangsook Moon on Feb 28, 2008 6:44 AM

Hi Hyangsook Moon,
The system is allowing you to create Confirmation again in SRM because the status is not yet updated in SRM since the G.R is not created in the backend successfully.
Since the confirmation is created in SRM and could not able to create G.R in R/3 through IDOC the system is giving you message as " Document is being processed".
So the system is allowing you to create confirmation again once you delete the table entry.
Hope this makes you more clear.Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Automatic Replication of Vendors from SAP R/3 Backend System to SRM System

Hi All,
I am searching for any existing standard configuration in SRM V 4.0 System for replicating Vendors of selected Purchasing Organizations from SAP R/3 Backend System to SRM System.
I have checked in the SPRO settings of SRM System and found/could make out from the documentation avalable in help itself, that there is a standard configuration by which you can automatically replicate the Vendors created in SAP R/3 by activating the following in SPRO: By putting a tick mark against the Check Box existing against "Create New Vendors also" under Vendor Synchronization with Make Global Settings I hope.
If the above statement is correct, then I hope we have to schedule a job ,since the above configuration is based on a job based execution which should run at least once a day.
In that case,which would be the relevant job which has to be created WITH A VARIANT in order to filter the Purchasing Organizations desired for.
Please help me out since we have to implement this asap.And if the above solution is not at all feasible,then please do reply at the earliest.
Awaiting for your early reply .
Regards
Annette

Hi
Please try this ->
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/5e/88ef3bc8821d0de10000000a114084/frameset.htm
Regards
- Atul

Switching Backend System

Similar Messages

Maybe you are looking for