Switching between 64 and 32 bit modes?

Are there any known issues with rebooting from 64 bit to 32 bit mode in 10.6.4 Server? Has anyone noticed broken services as a result of changing this?

The iSCSI initiator for Drobo products is very buggy under 64bit. Switching to the 32bit mode has drastically improved the speed.

Similar Messages

  • Using Automator or Applescript to switch between 32 and 64-bit modes

    I'd like to use applescript or automator to create something that would switch logic in and out of 64-bit mode (yes, I'm lazy). I've been fooling around with automator to no avail...anyone have any solutions?
    Thanks in advance.

    As a Launchbar devotee, it's pretty easy for me - to run Logic I hit command-space (to activate Launchbar) then "l" (lower case L) to select Logic and return to run it.
    If I wanted to change mode I do command-space (activate Launchbar) l (to select Logic) then command-I to do a get info, untick the box and go.
    None of this tedious open finder windows and locate the application bundle etc... I do a huge amount via Launchbar, it's about the quickest most efficient way of doing many things.
    Not sure about Applescripts, my guess is it would be quite clunky and slower than the way I do it...

  • Automatically switching between Visualization and Music Video modes

    While playing back a mixture of both music (mp3s) and music videos is it possible to automatically have the video output switch between the visualizer for mp3s and the music videos themselves?
    Any help would be appreciated.
    Eric.

    I see about 30-80 MB memory usage increase while switching to fullscreen and it is falling back while switching back to normal mode.
    I think the "freeing" of the memory is to agressive and produces such "lags."
    @Adobe: This should be optimized with the next versions.
    Update:
    With the Plash Player plugin (Firefox Nightly/Opera Next) it is worse and with Active-X (IE9) it seems to be ok.

  • Two Second Skip Switching Between Windowed and Full Screen Modes During Playback YouTube videos

    I am finding that every video I watch skips two seconds every time I switch back and forth from Full Screen mode. Happens mostly with 720p videos in YouTube.
    Can be replicated by pausing the video (also possible during playback, pausing it was just to determine how long the skip is), switching to Full Screen and back, noticing the two second change on the timer.
    Main operating environment is Opera browser on Windows 7 (x86), Flash ver.  11.1.102.55 and 12beta. I have also been able to replicate the problem on Internet Explorer ver. 9.0.8112.16421

    I see about 30-80 MB memory usage increase while switching to fullscreen and it is falling back while switching back to normal mode.
    I think the "freeing" of the memory is to agressive and produces such "lags."
    @Adobe: This should be optimized with the next versions.
    Update:
    With the Plash Player plugin (Firefox Nightly/Opera Next) it is worse and with Active-X (IE9) it seems to be ok.

  • 7344 servo motion switching between open and closed loop operation

    I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
    In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
    I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
    I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
    Bob

    Jochen,
    Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
    My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
    Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
    Bob

  • Automatic switch between personal and business mod...

    Hello,
    I appreciate particularly the personal / business home screen content differentiation on the E55. My wife uses E75 and appraises it as well. We have a problem though: it is quite boresome to have to switch manually when you leave or come home.
    Does anyone know that can be done automatically, for example during business days and hours ?
    Thanks
    Daniel

    Unfortunately no.
    My suggestion is to try both and stick with the one that looks best on the most channels that you regularly watch. I have a 720p LCD but the 1080i setting in my DVR provides the best HD picture by just a little bit.
    Also, you have an option you can set for the SD channels (SD Override). I prefer OFF, which means that the SD channels are sent to my TV also using 1080i. This results in a slightly worse SD picture than using 480i or 480p, but eliminates the extremely annoying 2-4 second delay (HDMI re-sync) when switching between HD and SD channels. Again, I suggest you try the various settings and pick the one that you like best (or hate less?)
    Justin
    Verizon FiOS TV, Internet, and phone
    QIP6416-P1, IMG 1.7C, Build 09.83
    Keller, TX 76248

  • Can't switch between  fill and outline.

    Here's the problem: I'm on an iMac, new, trying to use illustrator CS5. after using CS3 for a few years. In CS5, if I draw a shape, flat, in the illustration, then try to give it an outline, or change the outline, or do anything with the outline, I can't. If I click on the Shape tools in the toolbox and draw out an oval, for example, I can switch between outline and fill without any problems. Select shape, go to toolbox, select curved arrow for switching from one to the other. That's it. But if I draw a freehand shape, then try it, i can't do it. THIS IS A BIG CHANGE FROM PREVIOUS VERSIONS OF THE APP. GET IT? What is the problem? If it's something I have done, fine, tell me and I'll fix it. I tried calling Adobe support in Bangalore, and it took 30 minutes just to get the problem thoroughly appreciated by the techies. They just couldn't get the idea for half an hour! I had to go over it 4 or 5 times. And they couldn't come up with an answer. they were no help at all. I'm hoping the forum will yield better results. This is pathetic, guys. Your 90-day tech support is a worthless piece of crap, guys. The only tech support we have is this catch-as-catch-can forum. I've been using Illustrator since 1987, (illustrator 88) believe it or not, it's true. And I've always been able to get tech support to cure the ills. Not any more. Is that the way Adobe plans to offer tech support? if there were a way to contact Adobe Tech Support by going around Adobe Bangalore, i would use it. But, alas, I am stuck with this.

    Dear Monika and Mylenium: I figured out part of the problem, but not the solution: The shape I had drawn -and coudn't  switch between fil and stroke on-is one I had already done a gradient mesh on, too. I had later abandoned the gradient mesh by using the option key to delete mesh lines, but that didn't take the shape all the way back to its original flat state. So it wasn't a plain drawn shape any more. So how do I release the gradient mesh  to get back to  a flat shape? I'm also having trouble keeping the shapes in RGB or CMYK mode-they keep defaulting back to greyscale. Could that also be a symptom of using gradient mesh? Note: I'm using gradient mesh for the very first time now; I've never used it before. It seems to leave a lot of unexpected baggage behind. I would send a screen shot, but if I start up Grab or Voila, all the AI pallets go away, and that's half the information.  So how do I control gradient mesh?

  • Docked T500 - Switch between headphones and speakers

    Hey guys,
    I am using my T500 with an Advanced Mini Dock at work. I keep the headphones (with microphone) plugged into the docking station. 
    Sometimes I want to listen to the audio on my laptop's speakers rather than inside the headphones. Is there any way I can make this switch without unplugging the jack from the docking station. 
    I know that above the volume bar for some systems you are able to switch between headphones and speakers and also, up until ~1 month ago I was able to do this from the SmartAudio utility, but now I can't. I can just switch between SPDIF and headphones. 
    I am using Windows 7 64-bit and I have all the latest drivers and apps that come using the "System Update" utility.
    Please let me know if you have a solution for this.
    Thank you,
    Ciprian

    I'm pretty sure that the blame for this lies entirely with Microsoft and their stupid hardware-detecting W7 OS. Yes, it actually detects when you unplug the headphones, tells you what you just did, and promptly resets all sorts of things. The most sensible thing you can do (apart from reverting to XP, which doesn't do this) is to plug an external stereo jack to stereo jack socket extension lead, and plug either your headphones or speakers into that instead, whilst leaving the plug end permanently in the laptop. Microsoft can't pull that stupid stunt on an external connector, so you should be okay with that.

  • Switching between https and http requests

    Hi,
    Our application is built using ADF 10.1.3
    This application need to be integrated with an in house built single sign on system. ( SSO system is built in C# and .NET)
    This single sign on system only understand https request. Once user is validated against single sign on system, our application's authorization page is called in HTTPS mode. Once the user is authorized, he is forwarded to home page. While forwarding to home page, we want to convert the HTTPS request to HTTP.
    Currently once the user is authenticated, all requests are happening in HTTPS mode.
    We do not know how to make http request from existing https requested page.
    Any help is appreciated.
    Thanks
    Ranajit

    Hi,
    the way to do this is by redirecting the call from a PhaseListener or command button. The solution Avrom refers to is a PhaseListener that uses XML configuration file to determine whether or not the page you are navigating to requires https or http. The code that handles the protocol switch is printed below
      * Determines if the requested page requires SSL and if the current protocol
      * meets this need. If not the protocol is switched between http and https
      * @param viewId
      * @param pageRequiresSSL
      public void handleProtocolSwitch(String viewId, boolean pageRequiresSSL)
        ExternalContext exctx = FacesContext.getCurrentInstance().getExternalContext();
        boolean isSecureSSLChannel = ((HttpServletRequest)exctx.getRequest()).isSecure();
        // pages that require SSL and SSL is on, or pages that don't require
        // SSL but SSL is on and should be kept
        if (pageRequiresSSL && isSecureSSLChannel || !pageRequiresSSL && isSecureSSLChannel && isKeepSSLMode) {
        printDebugMessage("Page requires SSL = "+pageRequiresSSL+", channel is secure = "+isSecureSSLChannel+", is keep SSL = "+isKeepSSLMode);
        printDebugMessage("No protocol change required");
        // page requires SSL and SSL is not active. Switch to SSL.
        if (pageRequiresSSL && !isSecureSSLChannel) {
          printDebugMessage("Page requires SSL = "+pageRequiresSSL+", channel is secure = "+isSecureSSLChannel);
          printDebugMessage("Protocol change required to use https");
          switchToHttps(viewId);
        // switch to HTTP is page doesn't require SSL and channel isn't secure
        // and isKeepSSLMode is false
        if (!pageRequiresSSL && !isKeepSSLMode && isSecureSSLChannel) {
          printDebugMessage("Page requires SSL = "+pageRequiresSSL+", channel is secure = "+isSecureSSLChannel+", is keep SSL = "+isKeepSSLMode);
          printDebugMessage("Protocol change required to use http");
          switchToHttp(viewId);
        if (!pageRequiresSSL && !isSecureSSLChannel) {
          printDebugMessage("Page requires SSL = "+pageRequiresSSL+", channel is secure = "+isSecureSSLChannel);
          printDebugMessage("No protocol change required");
      * Switches from https to http using a redirect call
      * @param viewId
      private void switchToHttp(String viewId) {
          FacesContext facesContext = FacesContext.getCurrentInstance();
          ExternalContext exctx = facesContext.getExternalContext();
          ViewHandler vh = facesContext.getApplication().getViewHandler();
          String pageURI = vh.getActionURL(FacesContext.getCurrentInstance(), viewId);
          //redirect to http URL
          String remoteHost = getHostNameFromRequest();
          printDebugMessage("Switch to http on host "+ remoteHost);
          try {
              String port = httpPort.equalsIgnoreCase("80") ? "" : ":" + httpPort;
              String url = "http://" + remoteHost + port + pageURI;
              printDebugMessage("Redirecting to http URL "+ url); 
              //TODO check request Map
               this.printDebugMessage(" Content size of RequestMap before redirect "+exctx.getRequestMap().size());
              exctx.redirect(url);         
          } catch (IOException e) {
              printDebugMessage("Redirect to http port failed "+ e.getMessage());
      * switches to https using a redirect call
      * @param viewId
      private void switchToHttps(String viewId) {
          FacesContext facesContext = FacesContext.getCurrentInstance();
          ExternalContext exctx = facesContext.getExternalContext();
          ViewHandler vh = facesContext.getApplication().getViewHandler();
          String pageURI = vh.getActionURL(FacesContext.getCurrentInstance(), viewId);
          //redirect to https URL
          String remoteHost = getHostNameFromRequest();
          printDebugMessage("Switch to SLL/https on host "+ remoteHost);
          try {
              String port = httpsPort.equalsIgnoreCase("443") ? "" : ":" + httpsPort;
              String url = "https://" + remoteHost + port + pageURI;
              printDebugMessage("Redirecting to https URL "+ url);       
              //TODO check request Map
              this.printDebugMessage(" Content of RequestMap before redirect "+exctx.getRequestMap().size());
              exctx.redirect(url);         
          } catch (Exception e) {
              printDebugMessage("Redirect to http port failed "+ e.getMessage());
      * @return the hostname of the page request
      private String getHostNameFromRequest() {
          ExternalContext exctx = FacesContext.getCurrentInstance().getExternalContext();
          String requestUrlString = ((HttpServletRequest)exctx.getRequest()).getRequestURL().toString();
          URL requestUrl = null;
          try {
              requestUrl = new URL(requestUrlString);
          } catch (MalformedURLException e) {
              e.printStackTrace();
          String remoteHost = requestUrl.getHost();
          return remoteHost;
      }If your container doesn't support session sharing between http and https then the session is renewed. In OC4J you will have to configure this.
    Frank

  • Switch between speakers and headset on X-

    I've got X-Fi Fatalty FPS edition and desperately need to find a way to switch between headset and speakers. Especially since I use teamspeak a lot in games and don't want my speakers to echo while I'm talking.
    There is an option to mute speakers when the headphone jack is connected, but that requires me to reconnect the headphone plug each time I want to use them.
    There must be a switch to turn only the speakers off manually as well?
    With Soundblaster Li've! Digital, this problem was easily solved by switching between digital mode on and off, as my speakers were connected digitally and my headset on analog.
    But with X-Fi, there's no way to turn off the digital speakers alone.
    Please help.

    Plug your speakers into the soundcard as usual.
    use the front mounted headphone socket on the fromt of the X-Fi I/O unit to connect your headset and set the control panel to automatically mute your speakers when the headset is connected. Your speakers will mute when the headset is plugged in and all you have to do is plug or unplug the headset at the front to switch modes!...Now please do not ask about doing the same with your mike connector!! see other thread by me!! p.s creative do ship a /4" to 3.5mmm adapter with the card.
    Hope I have understood your post
    AndyMessage Edited by slef2003 on 0-4-2006 03:54 AM

  • Sapmmc -  jstart.exe keeps restarting, switching between green and yellow

    Hi Friends,
    I installed the SAP core server ( as part of SAP convergent charging) , but jstart.exe and dispatcher-1 process in sapmmc are noticed keep switching between yellow and green. when the jstart.exe turns green (all process running) , dispatcher-1 turns yellow (waiting to start) and when dispatcher-1 turns green (restart-yes) , jstart.exe turns yellow (some processes running). Only for a small duration , they both remain green (may be during transition).
    Trace File is as below: Iam not sure as what is missing here to be installed, as it is complaining about JEE directory in
    C:\usr\sap\C06\CCD09\j2ee\cluster\bin, which is not present., which was never installed as part of the installation.
    trc file: "dev_jstart.new", trc level: 1, release: "711"
    sysno      09
    sid        C06
    systemid   562 (PC with Windows NT)
    relno      7110
    patchlevel 0
    patchno    92
    intno      20020600
    make       multithreaded, Unicode, 64 bit, optimized
    profile    C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
    pid        3596
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      All, egi
    Wed Oct 26 04:53:47 2011
    trace logging activated, max size = 52428800 bytes, 2 versions
    arguments :
      arg[ 0] : C:\usr\sap\C06\CCD09\exe\jstart.EXE
      arg[ 1] : pf=C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
    trc file: "C:\usr\sap\C06\CCD09\work\dev_jstart", trc level: 1, release: "711"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      All, egi
    F 
    F [Thr 3600] Wed Oct 26 04:53:47 2011
    F  [Thr 3600] *** ERROR => SfCheckJeeVersion: Cannot find JEE binary directory C:\usr\sap\C06\CCD09\j2ee\cluster\bin. [sfxxmain.cpp 848]
    trc file: "C:\usr\sap\C06\CCD09\work\dev_jstart", trc level: 1, release: "711"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      All, egi
    F  [Thr 3600] *** ERROR => SfCheckJeeVersion: Cannot find JEE application directory C:\usr\sap\C06\CCD09\j2ee\cluster\apps. [sfxxmain.cpp 857]
    F  ********************************************************************************
    F  Java environment properties (C:\usr\sap\C06\CCD09\work\jstart.jvm)
    F    root directory    : C:\usr\sap\C06\CCD09\exe\sapjvm_6
    F    vendor            : SAP AG
    F    version           : 1.6.0_24
    F    cpu               : amd64
    F    java vm type      : server
    F    java vm version   : 6.1.027 1.6-b07
    F    jvm library name  : jvm.dll
    F    library path      : C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin\server;C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin
    F    executable path   : C:\usr\sap\C06\CCD09\exe\sapjvm_6\bin
    F  ********************************************************************************
    F    SAP extensions    : available
    F  ********************************************************************************
    I  [Thr 3600] MtxInit: 30002 0 2
    dispatcher trace
    trc file: "C:\usr\sap\C06\CCD09\work\dev_dispatcher-1", trc level: 1, release: "711"
    sysno      09
    sid        C06
    systemid   562 (PC with Windows NT)
    relno      7110
    patchlevel 0
    patchno    92
    intno      20020600
    make       multithreaded, Unicode, 64 bit, optimized
    profile    C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
    pid        428
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      All, egi
    Wed Oct 26 06:22:16 2011
    trace logging activated, max size = 52428800 bytes, 2 versions
    arguments :
      arg[ 0] : C:\usr\sap\C06\CCD09\exe\jstart.EXE
      arg[ 1] : -appTrc
      arg[ 2] : -nodeId=0
      arg[ 3] : pf=C:\usr\sap\C06\SYS\profile\C06_CCD09_W2K8-Sap-01
      arg[ 4] : -hostvm
      arg[ 5] : -nodeName=dispatcher-1
      arg[ 6] : -file=C:\usr\sap\C06\CCD09\config\jstart.config
      arg[ 7] : -jvmFile=C:\usr\sap\C06\CCD09\work\jstart.jvm
      arg[ 8] : -traceFile=C:\usr\sap\C06\CCD09\work\dev_dispatcher-1
      arg[ 9] : -javaOutFile=C:\usr\sap\C06\CCD09\work\jvm_dispatcher-1.out
    F 
    F Wed Oct 26 06:22:16 2011
    F  ********************************************************************************
    F  Java environment properties
    F    root directory    : C:\usr\sap\C06\CCD09\exe\sapjvm_6
    F    vendor            : SAP AG
    F    version           : 1.6.0_24
    F    cpu               : amd64
    F    java vm type      : server
    F    java vm version   : 6.1.027 1.6-b07
    F    jvm library name  : jvm.dll
    F    library path      : C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin\server;C:\usr\sap\C06\CCD09\exe\sapjvm_6\jre\bin
    F    executable path   : C:\usr\sap\C06\CCD09\exe\sapjvm_6\bin
    F    SAP extensions    : available
    F  ********************************************************************************
    I  [Thr 3828] MtxInit: 10000 0 2
    M  [Thr 3828] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=202;cur=2048)
    M  [Thr 3828] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    M  [Thr 3828] CCMS: Initalized shared memory of size 60000000 for monitoring segment.
    M  [Thr 3828] CCMS: Checking Downtime Configuration of Monitoring Segment.
    M 
    M [Thr 3828] Wed Oct 26 06:22:17 2011
    M  [Thr 3828] CCMS: AlMsUpload called by wp 1004.
    M  [Thr 3828] CCMS: AlMsUpload failed for C:\usr\sap\C06\CCD09\log\ALMTTREE.DAT.
    M  [Thr 3828] CCMS: CCMS Monitoring Initialization finished, rc=0.
    F 
    Please help.
    Thanks.
    Edited by: Zain Ahmed on Oct 26, 2011 9:07 PM

    HI,
    Import the SAP profiles in SAP transaction RZ10: Utilities - Import profiles - of Active Server
    OR
    Check what messages do you have in jvm_server0.out, dev_server0.out and bootstrap traces,
    also have a look at the note 142100.
    The first problem is that in the SCS instance there are no running enqueue server as its starting line have no line break at the end in the start profile. Without this NT cannot parse the line. After adding the line break the enqueue server could start.
    The second problem is that in the global dispatcher configuration for the LockingManager the en.port was set to 3201 instead of 3200 (which is correct as the SCS instance has the intance number 00).
    After correcting these problems the J2EE engine could be started fine.
    see similar threads
    Dispatcher - Running but Dialog Queue info unavailable
    /thread/96588 [original link is broken]
    logon710
    Message server not starting
    Thanks
    Swarup

  • When I set black point on windows, the image switches between blank and full image, why?

    when I set black point using windows, the image switches between blank and full image, why?

    I set black point with alt button down while I move sllider. When black
    dots show, I stop and back off a bit.  That's the normal result. Normally a
    white screen appears until I release the alt key. In my case, sometimes the
    screen goes from white to full image. It's not all the time. I view my
    power and ram use as I work and it doesn't spike when this happens.  It's
    as if the alt key command is not holding.  I've used both alt keys with
    same results.
    Thanks for responding.  I hope you have some ideas.

  • Automatic switch between 720p and 1080i

    I just got FiOS installed today and as I was going through the menu, I noticed that for the video resolution, you are forced to pick a format. Is there a way to set it up so that the STB automatically picks the resolution that the broadcaster has chosen? I don't want to watch everything in 1080i or 720p. I'd like to watch it as the channel has chosen to send the signal
    Solved!
    Go to Solution.

    Unfortunately no.
    My suggestion is to try both and stick with the one that looks best on the most channels that you regularly watch. I have a 720p LCD but the 1080i setting in my DVR provides the best HD picture by just a little bit.
    Also, you have an option you can set for the SD channels (SD Override). I prefer OFF, which means that the SD channels are sent to my TV also using 1080i. This results in a slightly worse SD picture than using 480i or 480p, but eliminates the extremely annoying 2-4 second delay (HDMI re-sync) when switching between HD and SD channels. Again, I suggest you try the various settings and pick the one that you like best (or hate less?)
    Justin
    Verizon FiOS TV, Internet, and phone
    QIP6416-P1, IMG 1.7C, Build 09.83
    Keller, TX 76248

  • NetworkManager - switching between wired and wireless

    Hello!
    I’ve set up a new laptop with Arch and now have a question concerning NetworkManager. Is it possible in NM to switch between wired and wireless connections like it is with Connman (https://wiki.archlinux.org/index.php/Co … d_wireless)?
    So far it appears that NM only disables the wired connection when wireless is used but keeps the wireless alive when switching to wired.
    I have already looked for a corresponding configuration but couldn’t find anything that helps.
    Thanks in advance.

    Easy Mode:
    You can install the tlp-rdw package and edit the /etc/default/tlp configuration file which has an option that does that.
    Hard Mode:
    If you don't want to install a package and its dependencies, you can write your own script and put it in /etc/NetworkManager/dispatcher.d and have the NetworkManager dispatcher hook run the script (which is actually what tlp-rdw does but you don't have to install the tlp package as a dependency)
    Note: tlp is a power manager and if you have any other power managers installed it might conflict with them so be wary of that.
    Here is the wiki page on tlp https://wiki.archlinux.org/index.php/Tlp
    Last edited by fungle (2014-08-05 23:05:00)

  • ADSL keeps switching between 'fast' and 'interleav...

    Hello
    I wonder if you could tell me if there is some reason why my line profile / ADSL latency keeps being switched between 'fast' and 'interleaved'. Everytime it is switched from interleaved to 'fast' I lose download speed. It has just changed again today and as a result my download speed has (according to my BT Home Hub Manager) dropped from 6.3MB (yesterday) to 3.2MB (now). Is it possible to have the line profile left as 'interleaved' so that I can enjoy the extra download speed ?
    Thanks for your help.
    Fortinbras
    Solved!
    Go to Solution.

    Hi
    I am sorry to see you are having problems with your BT Service
    I suggest you contact the forum mods they should be able to get interleaving turned on  for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
    They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
    They are a UK based BT specialist team who have a good record at getting problems solved
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Maybe you are looking for