Switching between license servers

Hello,
We have two SBO 8.81 installations on two different servers in same network.
Each server has own licence manager running.
SBO clients are installed on the client PCs.
Client PC's are accessing these servers directly.
No terminal service client (WTS or Citrix) platform exist.
In this case, from a client PC, how can I switch between different companies installed on different servers? Do I need to stop licence manager on server1 so that licence manager on server2 is the only licence server running and clients can switch to that server? "Chose Company" screen on client is remembering the last licence server. I can not change entry on "the field "Current server".
Please share your ideas if you have any.
Thanks in advance,
Savas Ertugrul

Hi,
In addition to Gordon's comment, the main purpose is to have no intervention in stopping the license server.
If you want to connect to the Server 1 you can connect through LAN directly and
if you want to connect to Server 2 you connect through Terminal Service in this way it will avoid confusing
and manual connection.
Better yet use Terminal Service for both license server.
THanks.
Clint

Similar Messages

Move CALs between license servers on different domains

Hi,
We have two domains, Domain-1 and Domain-2. All servers 2012 or 2012R2. Formerly we only had RDP services on Domain-1 but now we need a limited number of clients on Domain-2 too. Domain-1's RDS licensing server contains a number of CALs
never used. How can we disable or transfer these never used CALs to the new Domain-2 RDS licensing server?
regards Tor

Hi Tor,
Thanks for your comment.
You can use license manager to find the License server ID. Because let see “If the source license server is not available on the network when the Manage RDS CALs Wizard is run, you need to provide the license server ID for the source license server.”
For finding License server ID. Open RD Licensing manager. Right-click the license server for which you want to view the license server ID, and then click
Properties.
Click the Connection Method tab. The license server ID is listed in the
lower portion of the dialog box.
The migration of your license server requires three stages. First, you must activate the new license server. Next, you need to deactivate the old server. Lastly, you need to move all the licenses from the old server to the new server. To do this, you
will need to contact Microsoft Clearinghouse over the telephone. You should to be prepared with the paperwork for the original TS licenses, as this data needs to be provided to clearinghouse personnel. If the original paperwork is lost, then you need to contact
your Microsoft TAM (Technical Account Manager) to obtain copies. (Quoted from below link)
More information:
Migrating a Windows Server 2003 TS License Server (For reference)
http://blogs.msdn.com/b/rds/archive/2009/03/06/migrating-a-windows-server-2003-license-server.aspx
Remote Desktop Licensing Manager
http://technet.microsoft.com/en-us/library/cc732684.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

*Solved* Appliction to switch between running X Servers

Hi all
I am looking for a command application, which allows me to switch between running X Servers. Similar to ctrl+alt+Fx. I do need this, because I need the source how this is done.
THX
Last edited by ying (2011-08-30 20:36:31)

karol wrote:
Shark wrote:
You can use "chvt" commnd. For example, command:
chvt 4
will switch to console 4
Not exactly, I get
[karol@black ~]$ chvt 4
chvt: VT_ACTIVATE: Operation not permitted
when running inside X. OP wants to switch between running X servers, not VTs.
If you are inside X, then you have to do:
sudo chvt 4
Running X servers can be switched via chvt. For me to change from display 0 to display 1 i just do "chvt 8" as root.
Last edited by Shark (2011-08-30 14:14:54)

Why can't I use command+alt+arrows to switch between tabs correctly anymore?

I used to be able to use the method of command+alt+left or right arrows to switch between tabs. For example: I could be playing an online game, and be clicking things inside of the box on the screen that the game was on, use the method, and easily switch to another tab. Now, however, it doesn't let me switch between tabs unless i click outside of the game area.

Don't forget that there are many "pieces" to internet access that must all be set to make manual IP selection work, namely:
1) Your IP address
2) The addresses of your DNS servers
3) The default route via which packets leave your network ("router" in Network->TCP/IP)
4) Your subnet mask
As mentioned above you also need to assign an address from outside the DHCP pool that is on the same subnet, as at least some routers will refuse to route traffic that seems to originate from IP addresses that fall within the DHCP pool over which it has control if it did not yet assign that IP address to a client.

Configuring Nexus 5k for SAN switching between UCS 6100s and NetApp storage

We are trying to get our UCS environment setup to do SAN boot to LUNs on our NetApp storage. We have a pair of Nexus 5Ks with the Enterprise / SAN license on them and the 6-port FC module installed. What needs to be done to configure the Nexus 5000 to operate as the SAN switch between the storage target and the UCS environment?

I'm still not seeing the LUN on the NetApp device from my service profile. Here are the outputs from the two
commands you referenced here along with a few other commands if they help at all.
Port fc2/1 is the conneciton to the UCS 6100 with FCID 0x640004 being the vHBA in my Server profile.
Port fc2/5 is the NetApp target. I have the LUN masked to the vHBA port name 20:00:00:25:b5:01:00:ff
I have just the wwpn from the vHBA in my server profile and the wwpn of the NetApp target port zoned together. I'm not seeing any FC traffic at the NetApp though from looking at the statistics. Do I need to include something else in my zoning?
Again, any assistance would be appreciated. This is obviously our first venture into FC...

Oracle XE switching between instances

Hi,
I've installed oracle XE and created second database. Currently, I have two databases, can switch between them and have 8GB of user data available, even in separate DBs. I wonder, if this is license agreement complient. Only one instance is running at a time, have only one instalation...
Thanks in advance Jakub
Edited by: user11108056 on 25.5.2010 5:16

There is one more reference about licensing in instalation manual:
On a single computer, only one installation of the Oracle Database XE software can be performed. This does not affect any existing installation or new installations of Oracle Database 10g Standard Edition, Oracle Database 10g Standard Edition One, or Oracle Database 10g Enterprise Edition. In addition, users can run only one instance of the Oracle Database XE database on each individual computer. To run more than one Oracle Database server instance or install more than one copy of the database software, upgrade to Oracle Database 10g Standard Edition, Oracle Database 10g Standard Edition One, or Oracle Database 10g Enterprise Edition.
But even this does not look like a problem to me...
Jakub
Edited by: user11108056 on 25.5.2010 7:10

Concerns over switching between new Azure SQL Database Service Tiers

Windows Azure's new SQL Database
service tier pricing model will be put into effect in less than 12 months. We currently have SQL Databases on the Business and Web Edition pricing models.
We recently asked Azure Support a number of questions around the scalability and ability to switch between these tiers. The responses so far have been far from encouraging:
Q: If we exceed the criteria for a given tier (see http://msdn.microsoft.com/library/azure/dn741336.aspx), how will Azure respond? For example, if we are on the S1 service tier, and we exceed the maximum number of sessions (200), will any new sessions be
blocked until we manually increase the service tier? Or will you automatically move (and bill) us to/for the next tier level?
A: If you exceed the criteria of the existing tier, you shall be notified of performance issue like throttling. Users may experience slowness and blocking. There will not be any automatic upgrade.
Q: So to confirm, if we suddenly experience increased, unanticipated client activity overnight due to our web site becoming more popular, you will be blocking any user sessions over and above our performance level limit, until we manually make the transition
to the next level? Is there no “overdraft” facility/scalability in this respect? If this scenario took place within a short space of time, how would we have time to react? Simply blocking new sessions and preventing customers from using our site is not acceptable.
A: I’m sure you understand that SQL Azure database is a shared resource and hence we cap the resources for individual subscription so that a fair service is provided to all the concurrent users. If you feel that you cannot compromise on the user experience
then you shall think of an edition that best suits you. Please refer to the following document to best understand the throttling and its impact. http://social.technet.microsoft.com/wiki/contents/articles/1541.windows-azure-sql-database-connection-management.aspx#Throttling_Limits
Q: Since the changing of the performance level could take several minutes/hours depending on the size of the database, would we experience any downtime/degradation of performance of the database during this period?
A: You might
Q: If downtime/degradation of performance are a possibility whilst we switch service tiers, what do Microsoft recommend we do to safeguard against this? Should we create a second database on a higher tier level and then export the data from the lower tier and
import to the higher, before switching over? How do Microsoft recommend we switch tiers in a production environment with minimal disruption?
A: If you want to upgrade the tiers due to degradation of performance, you will have to create another database on a higher tier and import the data.
One of our key reasons for moving to Azure hosting was the seamless scalability it appeared to offered. As you can imagine, the responses above are a major concern for our production environment. Does anyone else have any thoughts or concerns in this respect?

James,
I reviewed the support incident you referred to and believe that the questions you asked may have been answered later in the interaction you had with the engineer. For the benefit of others viewing this forum I want to reiterate the answers
to your key questions here as well.
Q. What is the behavior when you reach the limits for the service tier?
A. Each service tier currently has limits on 4 different dimensions (CPU, physical reads, log writes and memory) of resource consumption. When you reach one of the limits, the behavior depends on which resource limit you are hitting, but
generally speaking is consistent with the behavior you would see with a similar hardware limit in the SQL Server box product. For example, when you reach the CPU limit your queries will start showing more SOS_SCHEDULER_YIELD waits,
the memory limit will cause a higher percentage of pages to be read from disk instead of the buffer cache (PAGEIOLATCH_xx waits), etc. This set of limits does not directly abort any of your queries--they just run longer as they
vie for the fixed set of resources made available to your database. In a system where the load greatly exceeds the resources, queries may start to time out.
The new service tiers continue with the Web/Business edition behavior of limiting the number of sessions and concurrent requests (worker threads) you can have. When you exceed these limits you'll get error 10928. Note that
each tier in Basic/Standard/Premium have different values for these limits (http://msdn.microsoft.com/en-us/library/azure/dn369873.aspx) than Web/Business and thus may encounter the errors at different usage levels. The key is choosing the appropriate
service level for the application, and to facilitate that the sys.resource_stats view shows historical usage information so you know where you stand as far as reaching any of the limits. This resource consumption data is also available in the portal.
Q. Is it possible to switch service tiers, and is there any disruption when you do so?
A. Yes, you can change between service tiers as described in this MSDN documentation (http://msdn.microsoft.com/en-us/library/azure/dn369872.aspx). This can be done through the portal, powershell, or REST APIs. [The preview currently has a restriction
where legacy servers don't support switching to Basic/Standard which is expected to be removed in the near future.] The link above outlines the limits on the number of tier changes you can do in a 24 hour period, expected time to perform the change, and
the client disconnect that occurs.
If you have further questions, feel free to re-engage on the support incident or reply to this forum thread.

Switching between CC accounts on one PC

Hi everyone,
I have my own private Creative Cloud subscription - everything works great. Recently I've got the corporate account for teams from my work. Is there any way to switch between accounts smoothly? Especially I'd like to have both Creative Cloud folders on my PC available to synchronise, without uploading/downloding files through web browser.

Moving this discussion to the Creative Cloud forum.
Are you planning on continuing your current personal subscription to the Creative Cloud? If not then you can deactivate your current license by selecting Help>Deactivate. You can then relaunch the software and choose the option to License this Software and enter the Adobe ID for the subscription you are wishing to use.
Regarding your inquiry for the Creative Cloud Connection you can sign out and sign in with the other account. I would recommend just utilizing the web interface at https://creative.adobe.com/ if you only need occasional access to files on your personal computer.

Audio Menu MOtion continue play when switching between menus?

How can encore continue playin the same background music when the user is switching between main menu and submenus? and not having to restart the song when you choose a submenu.

There is plenty about Encore to be frustrated about, but you should spend a bit of time investigating Scenarist or DVD Lab Pro (authoring programs that provide scripting). They are also missing some "features" (that are related to limitations of the DVD spec). And their price tags indicate why Adobe licensed the sonic authorcore only, and not "Scenarist" itself for the Adobe authoring component.

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

Can I have two or more JVMs in one mashin and switch between them?

Hi all,
I want to have two JVMs in one mashin and switch between them via a httpListener. If I can, could you please guide me to do it?
Thanks in advance,
Orod Semsarzadeh

may be my question is not fully clear. I mean, I want to have an bottun in my JSP when I click on it, 1 thread will be created and work in another JVM.

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

How can I switch between apps without going to home screen?

Is there anyway to switch between apps with one tap? (ie. without going to home screen first). Kind of like a command-tab feature.
Steve

Well, you can have one app that you can get to with a double push of the home button (set in settings which you want), but I think it's only your contacts list, or your ipod app. Still useful though.

Graphic distortion when switching between external and built-in display (rMBP)

Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

Do you have intel gpy as well as other graphic card? You may be viewing document on different gpu's. PS does not like multiple gpu's.

How to make my application programmatically switch between English and Russian

Greetings from Colorado...
My application needs to be switchable between English and Russian. Future languages to add are Spanish and Chinese. The user selects a language
from a control before starting the program and then the program changes the Captions, Boolean Texts, Graph Labels, and Enum Type Strings to the
chosen language. For Russian, this requires a different set of characters. I have made substantial progress by:
Control Panels>Region and Language>Keyboards and Languages>Change Keyboards added Russian>Keyboard>Russian on my development
computer.
In the LabVIEW.ini file, I added UseUnicode=TRUE (thanks to a suggestion found in this forum)
Made property nodes for controls and used properties such as Interpret As Unicode (True for Russian, False for English), Text, Font Name, Font Size, etc.
I have used fonts Arial and Arial CYR for Russian and MS Sans Serif for English
Set the keyboard for Russian and enter Cyrillic characters into text constants that are set for Arial or Arial CYR font. Sometimes one works and
sometimes the other works. As long as I set the font name in the property node the same way the text went into the text constant, it generally
works. I wish I could understand why one works sometimes and the other works other times!
I have had trouble with the Boolean Text going off-center when changing fonts and languages and it seems that by setting the Lock Text In Center
property to False and then True again, it seems to work. Often changing Boolean texts between short and long texts causes some of the long text
to be non-displayed; I have remedied this by explicitly setting the width of the Boolean text in a property node.
Often, the Russian text appears as gibberish with strange right-angle characters, :s, =s, and tiny numbers. I have been able to remedy this on my
development computer by ensuring that the text constant on the block diagram has the same size as the caption is supposed to have. This
is not necessary for normal programming in English, but it seems to help here. But it doesn't always solve the problem.
Sometimes the English text appears as Chinese gibberish in an Enum Type selection list or in a graph label. On my development computer,
it seems that making the text the last property to change helps here.
By changing the sequences of assignments to a single property node with a long list of properties, I have been able to make some of these
controls to switch between languages without gibberish showing up.
A few hours ago, I had the Russian strings in the Enum Type control working, except that when selecting from the available items, only the first
word of the Russian string was displayed. Two of the items start with the same word, so the user can't distinguish them.
At that time the English strings were appearing as Chinese gibberish while the list during the selection process displayed in English. As soon
as I changed the selection, future attempts to change the selection gave Chinese gibberish during the selection process, too. But this was only
a problem in the executable version; the source-code version worked fine.
In an attempt to get rid of the Chinese gibberish, I made new constants and retyped the items into them. This worked! But then, the Russian
stopped working and gave gibberish angles and tiny numbers, even though I didn't touch any of the code that sets the properties in Russian mode.
After trying a few sequences of setting the properties for the graph X label on page 2 of my tab control, this label started working correctly for both
languages. But the text of that label comes through on page 1 of the tab control, partly obscured by other controls on that page. After the
program runs a few more seconds, these shadows disappear.
Most times I restart LabVIEW, I get an error message saying there was a crash due to fontmgr.cpp, line 7494. But there actually wasn't a crash.
My computer has Windows 7 64-bit. Deployment Computer has Windows 7 32-bit. LabVIEW version is 8.5.
I have probably 50 or 100 more controls and indicators to change to language programmability and figuring out all this stuff for each one is
terribly time-consuming and there is no assurance that all of them will ever work.
At this point, I'm hoping that I am on an entirely wrong path and someone will send me a clue to get me on a path that is more predictable.
Thanks in advance to all who post ideas!
Cheers
Halden

Hi All,
I've made a lot of progress on this translation, but it's been really hard. There are lots of weird things going on that must be logical because they're in a computer, but I can't figure out what the logic is. When changing a font on a caption using the front panel, it sometimes changes the font on the caption and sometimes doesn't although the indicator always indicates the new font. Removing the first character of the unicode font string being sent to the caption seems to help...huh? Anyway, tabs still can't change language programmatically, and niether can ring controls (some kinds will take the new list of strings, but when selecting, they only display the first word of the string!). Boolean text can be reprogrammed, but only if the boolean text is set to be the same for both true and false states. When reprogramming captions on a non-displayed page of a multi-page tab-controlled user interface, the new text appears on the current page until I change pages back and forth. What a pain!
Sooo, NI....does LabVIEW 2011 have support for unicode fonts? Or, is there anything else in the new control style that will support programmatic language changing?
Halden

Switching between license servers

Similar Messages

Maybe you are looking for