Switching between multiple numbers on same Skype a...

I have 3 skyp numbers, , do i have to go to profile to change which number i want to show on the receiving phone when i call them? and if a receiving phone has a block, will changing the number pass the block?

Caller ID setup is done in your account settings, not your profile
Regards,
Neil

Similar Messages

Switch between fullscreen windows of same app

I have Safari open and have multiple windows that are opened as fullscreen. I want to be able to switch between the fullscreen windows of Safari with a keyboard keystroke. When not in fullscreen I can use Cmd-` to switch between windows of the same app but I am unable to do this in fullscreen mode and perfer to use the keyboard as much as possible. Any help would be great.

So far I've found that I can use ctrl-left and ctrl-right to switch back and forth between widgets, desktop, and fullscreens but I would rather use cmd-tab to switch to the app and then switch between windows in that app.

Switching between multiple input languages.

I use English, Korean and Google Japanese. I used to use Windows with the same set of languages and it was even more difficult than in OS X, because each IME may have multiple languages (for example, Korean IME has both Korean and English mode). Now in OS X it is better than Windows because each IME has only single language, but still there are some troubles.
I use long command + shift. It shows the list in the middle of the screen, but the order is change depending on the current IME. And it only has text, no flag icon, so it is difficult to get the IME I want without carefully watching the screen.
It looks like OS X does not support assinging a shortcut for each langauge. For example, if I could assign F1 for English, F2 for Korean and F3 for Japanese it would be much easier. Or if only the popup language screen had flag icons...
Is there any third-party app that helps switching between multiple IMEs?

If you stop holding down the keys so long, the list should not appear. Instead, use the flag icons at the top right of the screen to tell which keyboard is active. If you don't see those icons, go to system prefs/language & text/input sources and check the box for Show Input Menu in Menu Bar.
I don't know of any way to use keyboard shortcuts in general for this, but the app Nisus Writer has preference settings that let you set that up for that app.

Fastest way you switch between multiple images (CS3) ?

I'm originally a Fireworks user (from 2001) and am starting to learn Photoshop as it is in my CS3 set and it's superiority in image editing.
BUT, I was suprised/shocked/P.O.-ed to notice Photoshop doesn't have tabs to easily switch between images like Fireworks has had for the last 7 years.
(Yes, I realize CS4 has that option now, but I'm not willing to dole out another $600 bucks for another upgrade )
Anyway, enough ********.
My question is:
"Can you tell me how you switch between multiple images opened in Photoshop CS3?"
I'm assuming there must be a keyboard shortcut I can't find, or something besides having to shrink down the images and routing through them . . .
Thank you for your time and help,
Brad

Hi again My,
Thanks for the reply on my other post as well.
Ctrl+Tab
Got it. Thank you.
Quick and easy enough. I'm happy :-)
Brad

HT1343 how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme.

how do I switch between windows in the same programme? I know that I can use Command tab, however this takes you through all of the programmes that I'm using. What I need to do is have a shortcut to switch between windows in the same programme. For example if I'm in Excel and have 5 windows open I want to be able to scroll between each window of Excel only with a shortcut.
Please help!

Command and ~ keys to tab between open windows.
Technically it is the Grave Accent ` (aka reverse quote) under the tilda ~ key. Tilda ~ is shifted, and Grave Accent ` is not.
Command-Grave Accent

Switching between multiple tabs?

I am currently running Safari 3.2.1, haven't updated to 4 yet...Does anyone know a keyboard shortcut to switch between multiple tabs? Like you can "command+tab" to switch between multiple applications...If I have 2,3,4, etc tabs open in a single window, is there a command to switch between those multiple tabs without using my mouse???

Simpatico wrote:
it´s such a pity that Safari cannot abide by industry practice (IE, Chrome, Firefox) some command key + no of tab, instead of associating that to bookmarks.
What happens after 9 tabs? I regularly have 15+ open.

How can I switch between multiple windows of the same application (e.g. Safari) over several desktops ?

Hi All,
I have one application, for example safari, open and running with multiple windows (with or without tabs) spread over several desktops.
How can I switch between the windows only via keyboard? CMD+> and CMD+< let me only swicht between windows open on the one desktop I am currently looking at.
thanks for your replies,
equi

Barney,
many thanks for your efforts and your time (preparing and posting the screenshot, answering to this question,...).
Unfortunately, moving the focus to the next window only works with windows on the same desktop.
btw, using a german keyboard layout and german language settings the shortcut is "cmd+<".
I can switch with this shortcut between different windows of my Safari which reside on the same desktop, but I cannot swith between different safari windows distributed over several desktops.
Thanks,
equi

Switching between multiple desktops while using VNC

Hi All,
Encountering a minor inconvenience with switching between desktops while VNC-ing. I frequently telecommute and VNC into my work imac, which has parallels + windows 7 installed. My personal machine is a retina macbook pro, and both my macbook and the imac have the newest mavericks installed. I will frequently have multiple desktops open on my imac, but I find that when I am VNC-ing into the imac and then open up parallels in a full window that I am then unable to switch back to my other OS X desktops unless I completely shutdown my windows VM. Normally hotkeys works for me to switch between desktops (and still works when switching from OS X window to OS X window), but it just doesn't do the trick here. I know could just configure my imac so that parallels doesn't open up in full screen mode, which would solve the issue, but I feel like there's gotta be a way to switch desktops while VNC-ing! All tips appreciated!
Thanks,
KP

Hi,
This is possible using access restrictions in Universe designer based on user login.
For eg. there is user A,B and C and three connections C1,C2 and C3.
In Manage access restrictions you have to create a three restrictions(R1,R2 and R3): one using C1,second C2 and third C3.
Apply these three restrictions to corresponding to the users. i.e. R1-->A,R2-->B and R3-->C.
So based on user login the instance will be used for same report.
In IDT , I think this can be done using Data Level Security, but the concept wil be same.
Thanks
Gaurav

Switch between 2 numbers to make outward calls

I have 2 skype numbers - one for Ireland and one for UK, both linked to the same account and for business purposes. If i want to call Ireland i want to use the Irish number and to call the UK i want to use the UK number. Firstly, is there any difference in the charges or does it not matter which number is used. Secondly, for caller ID i want the UK customers to get the UK number etc. Therefore, how do i switch beween the numbers when making outward calls. Thanks

Hi, limbodan,
I still have not described how this works well; please forgive me.
Skype Numbers are for receiving incoming calls only.
People who wish to call you, who are not using Skype, will decide which number they want to use, if you have provided both numbers to them. You will receive their call on Skype, as if they were on Skype, too.
You can call out anywhere, using your credit (or a subscription) to pay for toll charges and connection fees.
Does this help clarify better?
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Switching between multiple takes?

Hi,
I am having a problem. I am recording multiple passes of drum tracks on top of each other. Is there any way to switch between them, so I can compare? I cannot figure this out. Any help? Thanks.

I'll second mr loops suggestion of using folders. It's absolutely the best way to take advantage of the multiple tracks in Logic, while maintaining some form of organization.
Especially when a typical drum tracking session can range from 8 to as many as 16 (or God forbid more) tracks, per take.
I like to throw take one into a folder, name it take 1, and even color code the folder. So now, all the drum tracks within that folder have taken on that color.
Record take 2, pack those tracks into a folder, name it "Take 2", and color that folder something different.
After you have recorded all your takes (for sanity's sake, let's say there's 4 takes). You can then make cuts on all those folders, over the various sections of the song, and place all the different sections of the different takes into a "Master Folder".
When you find the various sections from the various takes that you want to use, simply merge that master folder. Then, when you double click into that folder, you'll see all the various colored tracks, from the multiple takes, that were used to make the final comp.
From within this folder, you can add your cross fades, and fine tune your edit points.
Lastly, when your satisfied with it all, you can utilize the "Export All Tracks as Audio Files" function. Since you're doing this from within the folder, only those tracks will be exported.
You then have continuous audio files to bring back into the song, if you prefer to work that way. You can always keep the original folder takes around, should you later decide to re-address a section.

Switching between multiple libraries

So heres the deal. I have a 30G Video and my father has a 30G Video also. He likes his music the way it is and I do too. I have heard that you can create multiple libraries so you dont have to create different Login names (windows, we both share one computer.) So the thing is, how do you switch between those libraries? I tried just opening the library but all that does is add my library to the current one.
How can I swith between multiple libraries with ease and without messing any of the music in them up.

I downloaded a program that allows me to use it, thanks

Need Help - Palm Pre Switching between EVDO & 1X from same location

I recently bought Pre and it seems everything is fine on phone except most critical thing, the Wireless Radio. My Pre switches between EVDO and 1X without any reason. My other phone is HTC Touch Pro2 and HTC Touch Pro and neither of those phones switch out of EVDO while I'm online. It seems PRe is doing this without any notification. To run a test I've done this test of visiting same website at same time from same location and my HTC Touch Pro and HTC Touch Pro 2 will hold EVDO without any issue but Pre will keep juggling between EVDO and 1X. Anyone else experienced this on their Pre ?
I've already applied latest firmware to Pre as well as I checked PRL and I'm on same PRL as my Touch Pro 2 but for some reason Pre is the one which has issues trying to remain in EVDO.
I took it to local Sprint store and the storyline after 1 hour of waiting was that phone is working as per design and all radio signals are fine. But because phone size is small it doesnot have as powerful radio as HTC Touch Pro 2, what a piece of BS. HTC Touch Pro is same size or even smaller in certain dimensions than Pre and still it has no issues with EVDO. Probably I'll wait for a week to see if anything changes before sending this one back.
Also one more thing I noted was when I started phone, out of box it was super fast. I was really happy to see the speed of phone but when I updated firmware 1.3.5.1 it seems after that phone takes second or two to respond from the time you tap on it. Which is bit surprising considering that phone is brand new and it got latest firmware update.
Thanks
M
Post relates to: Pre p100eww (Sprint)

My Pre has never gotten stuck in 1XRTT data mode. Eventually, it goes back to EVDO. There's just no way to know when it will happen in either direction. Though, I have noticed that when the connection is previously inactive, and then I need to use it for something, it will often make the switch between the two network types/speeds at the time that it needs to go from dormant to active state. When the switch happens upon going from dormant to active, my Pre will also very often say that it cannot establish a connection to whatever I'm trying to get to, whether it be a web site in a browser or a "client" application of a web site. Most of the time, I will have to hit the appropriate refresh or retry button in the app.
In the Phone preferences, I updated its network settings and PRL just yesterday. Then I completely shut down my Pre to a powered off state via the standard power button menu shut down option. Upon power up and watching it for a while, my Pre still switches back and forth between 1XRTT and EVDO data connections at random for no reason. This happens even while sitting still on its Touchstone on my desk at work.
I agree that the Pre radio might not be up to par, but there is also another possibility - the software. Do we know how the 1XRTT and EVDO connections are driven by software on the Pre? Perhaps the software driving the data connection behind the scenes has issues?

Switch between multiple quicktime movies on a single page

I want them to play in a single window but use clickable links to switch between .mov files. I am working in DW CS5.

It depends on the code you are using to play the movies but it could be done with javascript. Although unless you are streaming the Quicktime movies, like a youtube, you will be forcing the user to download all the movies to load the page. If they are not setup to stream then you might want to load a separate page for each movie. If you show us the code you are currently using to play the movie we can help you through the process.

Why does my screen blank and need to be refreshed when I switch between multiple open tabs and is there a fix to this?

If I have one tab open at a site, and then open a new tab to a different website, when I click back on my other tab the screen is a blank gray color and I have to refresh it to get the site back. This happens almost every time I switch between my open tabs, no matter which tab I am going back to. I am not having this problem in any other browsers. This has only started happening in the last couple of months and it has gotten really annoying. Does anyone know how I can stop this?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Crystal Reports - Switch between multiple databases at runtime (esp. DB2)

Hi,
we are currently developing a reporting application in .NET (C#) with an integrated Crystal Viewer. We want to be able to change the databse dynamically at runtime, especially between different DBMS.
We encountered no problems when switching between a SQL Server and an Oracle DB, but we ran into big trouble if trying to connect to a DB2 db.
In the report itself we have a SQL Server connection defined that is used during the design phase.
In our application we change the connection at runtime using the following code:
CrystalReportViewer viewer = new CrystalReportViewer();
ReportDocument document = new ReportDocument();
document.Load("<<path>>");
Tables tables = document.Database.Tables;
foreach (Table t in tables)
    ConnectionInfo info = new ConnectionInfo();
    info.UserID = "<UserId>";
    info.Password = "<Password>";
    info.ServerName = "<DSN of DB2 DB>";
    info.DatabaseName = "<DB2 DB Alias>";
    TableLogOnInfo tableInfo = t.LogOnInfo;
    tableInfo.ConnectionInfo = info;
    t.ApplyLogOnInfo(tableInfo);
// ... Setting parameter values ...
viewer.ReportSource = document;
We also tried to add the following lines of code after the "ApplyLogOnInfo" call without any success:
t.LogOnInfo.ConnectionInfo.UserID = "<UserId>";
t.LogOnInfo.ConnectionInfo.Password = "<Password>";
t.LogOnInfo.ConnectionInfo.ServerName = "<DSN of DB2 DB>";
t.LogOnInfo.ConnectionInfo.DatabaseName = "<DB2 DB Alias>";
Especially we are wondering because we don't get any error message. The Crystal Viewer just opens and shows an empty report without any data records. The TestConnectivity method called on each table (we are only using one table at the moment) also returns true.
Furthermore it seems that whenever we call ApplyLogOnInfo, the UserID, password, server name and database name is resetted to the values defined in the data connection within the report (SQL Server, used in the desing phase as mentioned above).
Any ideas, what we are doing wrong?
Kind regards,
Markus
Edited by: X-Giesi-X on Feb 10, 2010 4:53 PM

Hi Markus
OK. Make sure you have the latest updates. First apply SP 2:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Than FP 2.4:
https://smpdl.sap-ag.de/~sapidp/012002523100001024152010E/cr2008_fp24.zip
Next, open the report in the CR designer and enable the "Verify on first refresh" option (File | report Options)
If that does not help, export the report to rpt file format and try to view the exported report in the CR designer. What do you see?
Ludek

Switching between multiple numbers on same Skype a...

Similar Messages

Maybe you are looking for