Switching between OS 10 and Windows 8 using VMware

Using an earlier version of Mac OS, I always used a Spaces window to load VMware Fusion. I could easily switch between OS and Windows by pressing the command and arrow keys. With Spaces no longer available, is it possible to switch between OS and Windows using only the keyboard? Thanks.

What version of the OS are you running. If 10.7 or later, Spaces have been replaced by Desktops, which can be added just like Spaces.
Mission Control - Mac Basics
Mission Control Preferences

Similar Messages

Using a KVM switch between the Mini and a PC

I've just bought a Mini to try out the whole Mac experience.
I'm having trouble getting a KVM switch to work with the Mac.
I have a Tripp Lite B034-002-R KVM switch to share between the Mini and my WinXP PC. The switch changes over to the other computer when you press NUM LOCK twice within 2 seconds. This is working in the PC (i.e. switching from the PC to the Mac is fine) but is not working in the Mac (i.e. the switch doesn't change from the Mac to the PC).
I have a MS "Natural Keyboard Pro" USB keyboard.
Is the NUM LOCK key somehow disabled or something on the Mac? I'm hoping there's some knob I can turn to get this working.
Thanks for your help,
Tom

I bought an IOGEAR GCS632U KVM switch to move between my Mini and Windows XP Pro PC. The keyboard is an Apple Pro. The switch was perfect for several days, then every attempt at invoking the hot key mode would fail; resetting the switch would not correct the problem. IOGEAR Support had me try another keyboard, which is the current standard Apple wired keyboard (the $30 one); it had the same problem as the Pro keyboard. Also we tried other things, but all failed. Sent the KVM switch to IOGEAR and they sent me a new one. After two days using the new switch, the keyboard malfunctioned; this time it was the backward delete key that failed. Same problem using other Apple keyboard. IOGEAR Support, after going through the same previous routine in which nothing succeeded in correcting the problem, tells me to return the switch and they will send me another. Based on my experience, apparently the GCS632U model has an incompatibility problem with (some?) Apple keyboards. This is confirmed by two posts on other discussion groups sites. Also, IOGEAR Support would almost admit that to be the case. They suggested that I use a generic keyboard, but I refuse to buy one just to use that KVM switch. IOGEAR should post the potential problem on their website as a warning.
Does anyone out there know from experience that a particular IOGEAR model does work with an Apple keyboard? IOGEAR Support says that they will send me a different model if I pay the difference. Or can anyone give me the brand name and model number of any KVM switch known to be compatible with Apple keyboards (particularly one that costs less thatn $75)? A ConnectPro 2-port USB KVM switch will work, according to another discussion group post. Any advice or information will be much appreciated.

Timeline window missing button to switch between frame mode and timeline mode

I'm using Photoshop CS6 Extended.
This is what my timeline looks like now.
In tutorials they refer to a button that should be to the left of the drop menu that says "forever". The button is supposed to allow you to switch between frame mode and timeline mode.
this is what the timeline window looks like in timeline mode and with the button that allows you to switch.
I've already tried reinstalling and upgrading to CS6 extended, as some forums suggested.
Please help. Animation is the core reason that I need photoshop and without this button I'm extremely limited. Thanks.

OK. This should work. Copy and past the below script into Script Editor, save it as an AppleScript application to the Desktop. Double-click it and it should change to grayscale. Double-click it again and it'll toggle back.
tell application "System Preferences" to activate
delay 1
tell application "System Events"
tell process "System Preferences"
click the menu item "Universal Access" of the menu "View" of menu bar 1
click the radio button "Seeing" of the first tab group of window "Universal Access"
click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
end tell
end tell
tell application "System Preferences" to activate
delay 1
tell application "System Events"
tell process "System Preferences"
click the menu item "Universal Access" of the menu "View" of menu bar 1
click the radio button "Seeing" of the first tab group of window "Universal Access"
click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
end tell
end tell
tell application "System Preferences" to quit

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also.

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?

I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office. How easy or difficult is it to transfer data files between the iPad and Windows? Are there obvious problems or the need for some form of conversion programs?
Many thanks for any advice.
David

You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

Connect as sysdba between Linux and Windows without using password

hello
Hello
I need to connect as sysdba between Linux and Windows without using password for the sys user
Sqlplus /@string_connection
Plz help me

Duplicate post:
Connect as sysdba between Windows and Linux
Actually you have been given the answer in your above thread. You need to read the Oracle documentation. Search password file at tahiti.oracle.com
regards

Switching between OS X and Win7 on MacBook Pro

Is there an app or some process to easily switch between OS X and Win7 on my MacBook Pro? Thanks.

If Windows is installed in BootCamp then reboot from one OS to the other.
If it is install to be used by an emulator that start your Windows applications.
Allan

Sharing files between mac os and windows on same computer???

I am going to get a new Intel based mac. Is there a way to share files between the mac and the windows os?
Example: I would like to share my iTunes music library from mac os so it is also available in Windows iTunes.
Is there a way to do this without having to mirror the entire library within Windows?
Thanks!!!!

It also depends on how you want Windows to be working on your PC - do you want to have a dual boot system (i.e. you choose whether you want to use OS X or Windows when you turn the computer on) or do you want to use a 'virtualization' program like Parallels (i.e. Windows loads up as a window on your OS X desktop).
Depending on how you want to do things will affect the ease of integration between OS X and Windows. Via the virtualization route, what you want to do can be done in a couple of clicks - you go into network neighbourhood (in Windows) and set up a Network shortcut to the files you want. You can do the same trick via OS X using the 'Network' functionality in Finder.
Martin Bradford-Gago
Life as an Apple Switcher: http://aurora7795.blogspot.com

Icloud sync only works between mac pro and windows outlook, not with iphone and ipad anymore

Hi
Can anyone help me with my problem?
I do have icloud installed on my MacBookPro, on my Windows Outlook computer, on my iPad 2 and on the iPhone 4S.
Now until yesterday everything synchronized perfectly well.
Then I created some groups on my MacBookPro address book and since then (I believe that was when it started) icloud no longer synchs from and to the ipad and the iphone. It still works between the Mac and Windows Outlook.
On the iPad/iPhone I have tried everything but it still won't do. I have even reset the whole iPad and obviously lost all data and tried again. I all sometimes get is a few contacts back into the address book on the ipad. But only a limited number, not all.
Also, to delete the icloud account on the ipad/iphone is sometimes not possible. It just hangs and I can see the message "Deleting..." for ever.
Anyone an idea?
Thanks in advance!

One more comment. Wired connection seem to be stable neither. I have ping running to the Windows computer and after a couple of minutes, it gets broken.
However if I have both WiFi and cable connection to the home router and disconnect from cable (after ping is broken), I get the network to the Windows comptuer back. Nothing serious on the network change, I just get 192.168.1.x instead of 192.168.1.y as IP).
During this network switch I do nothing with the Windows computer.
This is not valid if I want to connect to the Windows computer via Microsoft sharing (smb://192.168.1.x), then it immediately breaks the connection. Can't get it back until Windows is restarted.
Getting lost...

Can you move files back and forth between an iPad and a PC using iTunes?

If I read this article correctly, http://support.apple.com/kb/ht4094 I should be able to connect my iPad to my PC, fire up iTunes and then on the Apps tab in iTunes I should be able to click on an app, Pages for example and then just drag files onto the Pages Documents column from a Windows Explorer window.
This is great. I was hoping to use DropBox but it is such a hassle I don't know why people are so thrilled with DropBox on iPad. If I can just move files back and forth using iTunes that should be fairly easy. I wish there was a way to just upload my files to iCloud from my PC but the iCloud control panel app for Windows only seems to connect Outlook, Photostream and Bookmarks. I want to be able to just carry my iPad and not have to deal with a computer.
I thought that they said that you didn't need to have a computer to have an iPad. I guess if you have a computer and then GET an iPad its a different story, unless you have a Mac of course.
Anyway my question is: can you move files back and forth between a PC and an iPad using just iTunes?

I still need to do some trial and error testing with DropBox and my iPad. But can I link my iPad to my DropBox account so that I can always see the files on DropBox when I open Pages on my iPad? I just want one place to store my documents, and iCloud doesn't seem to be up to the task when it comes to opening a fil;e, editing it and then saving it back to iCloud. I just want a networked storage location that works like a networked drive on my LAN.
I realize that hollywood and the music industry are up in arms about file sharing on the Cloud which is why so many things are made more difficult than they need to be.

How do i set a peer to peer network between my iMac and windows machines?

I want to set up a peer to peer network between my iMac and Windows based computers in my house. I also want it to a wireless set up. Mostly being done to share videos, pictures, and music. Any insight would be appreciated.

I'm trying to connect my MacBook Pro to Wifi using internet sharing
Why?
Just connect the MacBook to the same internet as your iMac.
MacBook > Wi-Fi router > Internet.
You are connected to the internet with your iMac.
iMac > Wi-Fi router > Internet
Why do you want to go MacBook (via Wi-Fi) > iMac > Wi-Fi router > Internet?

Switching between page layout and word processing

I can't seem to switch between page layout and word processing view. I've read all the posts on this and still can't figure out why I can't just type a document into Pages. The only option I have in page layout view is to type into text boxes, which is not what I want. I just want to type a letter for crying out loud.
Before I get all the rants about reading User Guides, etc. *I have*. I've also searched on here and in-app help and just don't understand the fuzzy/non-existant answers. Obviously, I'm a newbie, so please don't jump all over me for this. If it was Word - I could do this in NO time. I just find it incredibly frustrating that inputting a normal document should be so difficult.
Is "Pages" *not* a word processing program? Is it just a cut and paste application? Sorry for the tone - I mean no disrespect - it's just that I've been fooling around with this for DAYS and I just don't have time to spare anymore. I really need to get this done.
Can somebody give me a straightforward answer on how to just type a normal document into pages without using text boxes?
Thanks and I apologize for not being mac-savvy. It took some of us a lot longer to see the light =)

Here is a script doing the conversion task for you.
Open a Page Layout document
run this script:
--{code}
set p2t to (path to temporary items from user domain) as text
set path_2_doc to p2t & (do shell script "date +_%Y%m%d_%H%M%S.doc")
tell application "Pages"
save document 1 in path_2_doc
open file path_2_doc
end tell
--{code}
that's all folks.
Yvan KOENIG (VALLAURIS, France) lundi 20 juin 2011 18:03:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

MacBook Pro won't automatically switch between internal speakers and display audio

I have a MacBook Pro that connects to a LED Cinema display. It used to automatically switch between internal speakers and display audio when plugged in to the display but won't anymore. I have to manually change it in System Preferences --> Sound. Does anyone know how to make it do that again?
thanks,
Ben

I just want to add, I have the same problem, and just want to help raise awareness of it.
1st, the problem only started recently (have been using the Thunderbolt display since it was released), I did not have this problem, and noticed it beginning only in the last month. (since January)
2nd, My particular setup, includes a hard drive attached to the firewire port on the back of the Thunderbolt Display (so, I am wondering if anyone else experienced this problem with a firewire drive being connected).
     My full setup:
          Macbook Air (2011)
         Thunderbolt display
          Western Digital drive (attached to firewire of display)
3rd, If I go into settings, what I will see is the "Display Audio" is selected (but no sound coming out),
If I then select "Internal Speakers," a buffered "history" of all the sounds I did not hear is then played (pretty funny actually) - for example, if I sent mail, adjusted the volume, and started playing a song.... it immediately plays all those sounds when selecting "Internal Speakers"
4th, If i then select "Display Audio" - it does nothing
5th, what I have to do, to resolve this is: eject all my hard drives, disconnect the thunderbolt cable, then reconnect the thunderbolt cable, and everything works as normal.

My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker

My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker so I can listen to my music and games. Is it hardware or software problem?

I was told by a friend that sometimes when you use a 3rd party charger that the connectors are not the same size and so it can affect the sensors in the phone and make it seem like it is in a docking station and so changes the output for dock speakers. With that said, I didn't take my pohone in to be serviced at the appple store because it was a 3GS and over 2 years old and so not covered by any service plan. Since then my phone is back to normal and I can use my headphones and listen with the speakers on the phone. I stoped using the suspected cheap 3rd party charger and maybe that's what did it, but not sure if it was or wasn't the cause of my problem. I'm glad that my phone is better I was kinda holding out for the Iphone 5 when i comes out later and hope my phone lasted until then.

Could I configure local switching between sub-interface and global interface on ASR9k?

Could I configure local switching between sub-interface and global interface on ASR9k?

For 2 interfaces it is probably best to use an xconnect. It is faster and saves system resources (eg mac learning doesnt apply to xconnect).
Config example:
l2vpn
xconnect group link
p2p link
interface Bundle-Ether100.4321
interface Bundle-Ether500.4321
EFP config:
interface Bundle-Ether100.4321 l2transport
encapsulation dot1q 4000
rewrite ingress tag pop 1 symmetric
interface Bundle-Ether500.4321 l2transport
encapsulation dot1q 2000
rewrite ingress tag pop 1 symmetric
This example shows that you can link 2 EFP's with different vlan's together if you'd pop the tags.
If the EFP's are of the same vlan, then popping the tag can be done but not a must. In general it is recommended to always pop vlan tags so there is a standard EFP design, but not for any technical reasons.
When you use a bridge domain and using a BVI, you MUST pop the tags as the BVI has no notion of a vlan tag and wants to see "plain ethernet".
regards
xander

Switching between OS 10 and Windows 8 using VMware

Similar Messages

Maybe you are looking for