Switching Between Sessions Problem ...
Dear all,
I am using SGD 4.3 and I am experiencing the following problem ...
When switching between puTTY sessions using ALT and TAB or Suspend and Resume it is messing up the keyboard mapping.
When I begin to type within the puTTY session the text is prefixed with the ESC Character � ^ [ �
Does anyone know of a fix??
Thanks for any advice :)
Hi carmelomtta,
I am launching thepuTTY sessions via SGD. The puTTY executable resides on the same Windows Termiinal Server. The puTTY sessions that I open are pointing to the same IP address.
I launch one session from my Webtop and the keyboard input is fine. I launch another puTTY session via SGD and the keyboard mapping is fine.
I switch between the two sessions using ALT TAB and then begin to type and every character is prefixed with an ESC Character.
The problem is intermittent. It does not happen all the time.
Thank you for your help.
Similar Messages
-
I have an mdi applicaton in Visual studio 2010 (.Net framework 4.0). I'm having a flickering problem when user switch between an MDI Child form. I'm declaring the child form then setting the borderstyle.none at design time and dock property to fill
through programming and make them a MDIChildren before I show them so that it takes up the entire space of the MDI Parent window without being maximized (client request).
i don't want to display control box(minimize, maximize,close) of child form in mdi parent form. (client request)
The problem is that when the child form is being displayed it is briefly shown in it's default size with icon and control box before being resized to fill the available area on the MDI Parent form. When a Child Form loads, you can see it in it's original
size (the size from Design-time) then all this flickering while maximizing .
In other words, child form show up in the client area of the MDIForm, not maximized, with a caption, very shortly, before they are finally filling the client area. there is a short flicker when a new form is created and displayed. This process is most noticeable
with a not-so-powerful PC or there are lots of control inside child form.
below is my code to show child form
MyChild1 c1 = new MyChild1();
c1.MdiParent = MdiMainParent;
c1.Dock = DockStyle.Fill;
c1.Show();
how can i solved the problem of flickering issue?
I tried many options which i have described below
1.double buffering.
2.set style property to child form
this.SetStyle(ControlStyles.UserPaint, true);
this.SetStyle(ControlStyles.AllPaintingInWmPaint, true);
this.SetStyle(ControlStyles.DoubleBuffer, true);
3. override below method in each child form
protected override CreateParams CreateParams
get
CreateParams cp = base.CreateParams;
cp.ExStyle |= 0x02000000;
return cp;
4. override below method in each child form
const int WM_NCPAINT = 0x85;
const int WM_SIZE = 0x05;
protected override void WndProc(ref Message m)
if (m.Msg == WM_NCPAINT)
if (this.WindowState == FormWindowState.Maximized)
return;
if (m.Msg == WM_SIZE)
if (this.WindowState == FormWindowState.Maximized)
return;
base.WndProc(ref m);
but I didn't see any effects. please someone help me to resolve flickering issue. thanks in advance.Hi hardikvaishnav,
This is a known issue which has been reported to Microsoft Connect. Unfortunately, this issue will not fix due to stability issues around MDI. For more details, see
https://connect.microsoft.com/VisualStudio/feedback/details/97787/border-of-mdi-child-form-flashes-up-despite-formborderstyle-none.
You might use a user control or panel instead.
Best Regards,
Bob Wu [MSFT]
MSDN Community Support | Feedback to us -
I've noticed this especially when I youtube or video stream for a while. Switching between tabs takes 3-4 seconds.
Definitely a memory leak! Is it a general problem or addon specific?
Also, when I try to close firefox and restart it, the process doesn'y get killed with the normal Command + Q in Mac.
I need to use Force Quit instead.Try updating Flash. You appear to be running an older version dating from September 2010 which might be the cause of the problem. Download from http://get.adobe.com/flashplayer/
If the problem persists after updating, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit. -
I m having ipad 4 and after upgrading to ios7 I m facing continuously rebooting problem while switching between apps can any buddy help or facing same problem
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use.. -
Excel 2011 problem: windows resize automatically when switching between workbooks
I am facing a very annoying problem when opening several workbooks in Excel. When shifting from one workbook to the other (either by selecting the workbook from the menu list, or by cycling through using 'cmd + ~'), the workbook jumps to a smaller size automatically. I have to click the green + button twice before it stays on the maximum window size again. Very frustrating experience when you have to switch between workbooks regularly.
Anyone experiencing the same problem? Is there a solution to this?
I am using Excel for Mac 2011. Just upgraded my MacBook Pro to Yosemite 10.10.1, but was facing the same problem using Mountain Lion.
Hope someone can help me out!3/1//2015
Hello. Thank you for posting your questions. I followed the suggestions and found that nothing worked on my computer. So I tried clicking around and found 2 solutions.
1. On the top tool bar, Click on "View" and scroll down to " Enter Full Screen". The tabs were easily accessible.
My Favorite now:
2. On the top tool bar, Clck on "Window" and scroll down to "New Window". This will duplicate your desired window in a "complete with tabs- window". I then Exited/Clicked out of the "offending" window.
I think clicked back in the "good" window and clicked "Save".
I was able to close out the document and re-enter it from my Finder Window.
Problem Fixed.
I hope those of you out there can have this work on your machines.
I am running OS X Yosemite 10.10.2 on a Mid 2014. -
O.K. I found 3 issues on my iPad 3 after ios update:
1. iPad does not go to black after non-use
2. iPad is slow to switch between some catagories in control panel
3. Speaking of control panel; have I lost my mind? I can't find time adjustment responsible for iPad going to black.Outside of the contact number for that you've already used I don't know another way of direct contact. Here are some things that they may or may not of had you try that might help you. If you will go to the settings app and pick general on the right-hand side you will see accessibility. Within that you can adjust a text size make the text bowl you can also increase the contrast. You can also adjust the brightness and control panel.
As for Siri again in the settings app under general you should see Siri on the right-hand side with the switch to turn it on. If that is turned on and you're still having issues
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/ -
JSF / Switch between HTTP and HTTPS
Hello!
I want to switch between HTTP and HTTPS using JSF.
Under Apache Struts framework I can use struts extension "sslext.jar" to configure switching between http and https in one web application.
e.g. Login-jsp should be secured, all other jsp's should run unsecured.
Any ideas?
regards
Harald.Thanks,
I made the necessary enhancement for the second phase, password confirmation required when return to SSL zone after leaving it after a succesful login.
I did the following:
1) create a class in the application scope and/or singleton class with the servlet paths that require SSL
2) create a plugin that reads ActionConfigs from the ModuleConfig
3) create a filter that sets a request scope flag that says that password must re-entered.
Code Extracts:
1) MainshopContainer application level parameter singleton class:
private static HashMap sslZoneMap = new HashMap(50); // key = servlet path of request, example /login.do
public boolean isInSSLZone(String servletPath)
return this.sslZoneMap.containsKey(servletPath);
public void addToSSLZone(String servletPath)
this.sslZoneMap.put(servletPath,null);
public int getNumberOfActionsInSSLZone()
return this.sslZoneMap.size();
2) Struts plugin
add a call to loadSSLZoneMap in plugin init method:
loadSSLZoneMap(config, mainshopContainer);
private void loadSSLZoneMap(ModuleConfig config, MainshopContainer mainshopContainer)
throws ServletException
try {
ActionConfig[] actionConfigs = config.findActionConfigs();
for (int i = 0; i < actionConfigs.length; i++)
if (actionConfigs.getParameter().indexOf("/jsp/account/") < 0) // /account/* = URL path for SSL zone
// not found = not ssl zone
System.out.println("loadSSLZoneMap, following actionConfigs excluded from SSL Zone: "+actionConfigs[i].getPath());
else
// found = ssl zone
String servletPath = actionConfigs[i].getPath()+".do";
mainshopContainer.addToSSLZone(servletPath);
System.out.println("loadSSLZoneMap, following servletPath added to SSL Zone: "+servletPath);
System.out.println("loadSSLZoneMap, number of actions in SSL Zone: "+mainshopContainer.getNumberOfActionsInSSLZone());
catch (Exception ex)
ex.printStackTrace();
throw new ServletException("Exception caught in loadSSLZoneMap: "+ex.toString()+" Initialization aborted.",ex);
3)
public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain)
throws IOException, ServletException {
HttpServletRequest req = (HttpServletRequest) request;
HttpServletResponse res = (HttpServletResponse) response;
String servletPath = req.getServletPath();
boolean secure= this.mainshopContainer.isInSSLZone(servletPath);
The wole picture:
The filter adds a RequestDTO object that includes all request parameters, one of them is the secure flag.
I have a session scope class UserContainer that includes all the session parameters, one of them is the lastRequestDTO.(last made request)
At the end of all my jsp's I set the lastRequestDTO variable.
In that method I set the passwordConfirmationRequired flag if needed:
public void setLastRequestDTO(RequestDTO _lastRequestDTO)
if (this.lastRequestDTO != null && this.lastRequestDTO.isSecure() != _lastRequestDTO.isSecure())
this.setPasswordConfirmationRequired(true);
this.lastRequestDTO = _lastRequestDTO;
I read the passwordConfirmationRequired in all my jsp's in the SSL zone that allow editing or deleting and if that flag is true, a valid password must be re-entered in order to make the updates.
When the password is OK I reset the passwordConfirmationRequired to false.
I need some help for the first phase, that is SSL setup for all actions related to jsp's with url path /account/*
I tought I could define it in the web.xml:
<security-constraint>
<web-resource-collection>
<web-resource-name>All Account Related Pages</web-resource-name>
<url-pattern>/account/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
but that doesn't work and finnaly understood why:
Example: /WEB-INF/jsp/account/login.jsp corresponds to /login.do
The url pattern /account/* at the container level is never encountered.
Is it allowed to declare the following action path: /account/login instead of /login?
If yes I could add following prefix /account to all my action paths and forward paths and this could resolve my problem.
What's your opinion?
If no, would your library resolve this?
Will all the Struts/JSP/JSTL url generating tags pick-up the required protocol (http/https) according to your configuration file?
Regards
Fred -
*I have a 3GS 16GB iPhone which will be a year old in August. When I had it, I was syncing it on my old Macbook Pro which is about 2 and a half years old. No problems there.*
I now have a 13 inch Macbook Pro 2.66GHz, only about a week old. My iPhone will plug into my laptop and charge, but it does not get recognised in iTunes and the program does not automatically open when I plug it into my laptop. I have done the trouble shooting on here, including uninstalling and reinstalling iTunes and it did sync once, but it hasn't done that since. If anyone is experiencing or has experienced the same problem and knows how to fix it, I would be grateful if you could respond to this message. Thank you.Hi carmelomtta,
I am launching thepuTTY sessions via SGD. The puTTY executable resides on the same Windows Termiinal Server. The puTTY sessions that I open are pointing to the same IP address.
I launch one session from my Webtop and the keyboard input is fine. I launch another puTTY session via SGD and the keyboard mapping is fine.
I switch between the two sessions using ALT TAB and then begin to type and every character is prefixed with an ESC Character.
The problem is intermittent. It does not happen all the time.
Thank you for your help. -
Switching between multiple takes?
Hi,
I am having a problem. I am recording multiple passes of drum tracks on top of each other. Is there any way to switch between them, so I can compare? I cannot figure this out. Any help? Thanks.I'll second mr loops suggestion of using folders. It's absolutely the best way to take advantage of the multiple tracks in Logic, while maintaining some form of organization.
Especially when a typical drum tracking session can range from 8 to as many as 16 (or God forbid more) tracks, per take.
I like to throw take one into a folder, name it take 1, and even color code the folder. So now, all the drum tracks within that folder have taken on that color.
Record take 2, pack those tracks into a folder, name it "Take 2", and color that folder something different.
After you have recorded all your takes (for sanity's sake, let's say there's 4 takes). You can then make cuts on all those folders, over the various sections of the song, and place all the different sections of the different takes into a "Master Folder".
When you find the various sections from the various takes that you want to use, simply merge that master folder. Then, when you double click into that folder, you'll see all the various colored tracks, from the multiple takes, that were used to make the final comp.
From within this folder, you can add your cross fades, and fine tune your edit points.
Lastly, when your satisfied with it all, you can utilize the "Export All Tracks as Audio Files" function. Since you're doing this from within the folder, only those tracks will be exported.
You then have continuous audio files to bring back into the song, if you prefer to work that way. You can always keep the original folder takes around, should you later decide to re-address a section. -
IChat Screen Sharing Stops when Switching Between Displays
Hi. Have been doing iChat quite nicely with my Dad for years and now I have a problem. Running current Snow Leopard 10.6.2 on both Macs, iChat 5.0.1. I usually hop onto his screen to help him solve problems, answer questions, do updates, etc. Until very recently, I have been able to switch between his desktop and mine by clicking on the small alternate display window. I could work on his computer and mine by simply switching between them in this manner. Now, suddenly, iChat screen sharing stops when I click on my display in the small window. This action returns me to my display, but the screen sharing session ends and I need to request it again. Any idea what might be going on here? I'm stumped. Thanks.
Hi,
Is there any chance you are clicking on the top left hand corner (where the red blob would be) as this will Quit Screen Sharing ?
10:13 PM Friday; January 15, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
I wonder why it is not possible to swtich between users witout entering a password. I have a test user and often have to switch between my account and that of the test user. Now, if there were a way to exchange certificates like in SSH the switching would be possible without tedious entering of passwords. Has nobody thought about that?
Here is another way to approach the problem. Instead of Fast User Switching, use Screen Sharing. But I did have to play some tricks to get the Screen Sharing client to allow me to access a testaccount on the same Mac.
System Preferences -> Sharing -> Screen Sharing. Enable AND Allow the testaccount to use Screen Sharing.
System Preferences -> Sharing -> Remote Login. Enable AND Allow the testaccount to be accessed via ssh.
Applications -> Utilities -> Terminal (this is where I play a trick on Screen Sharing)
ssh -L 59222:localhost:5900 localhost
You are using ssh to create a tunnel that will trick Screen Sharing into thinking it is NOT connecting to itself. When ssh prompts for a password, it expects your own password.
Finder -> Go -> Connect to server... -> vnc://testaccount@localhost:59222
You will be prompted for the 2nd account's password.
You will then be asked to "Share Display" or "Log In". Choose "Log In" and a new Fast User Session will be started, and you will have access to it via Screen Sharing.
No need to actually Fast User Switch, Just use the Screen Sharing session to access your testaccount's session.
You can also attach a Screen Sharing session after having started the testaccount via Fast User Switching.
The 2 key items above (besides making sure System Preferences is setup correctly) 1) creating an ssh tunnel to trick Screen Sharing, 2) using the vnc://testaccount@localhost:59222 from Finder -> Go -> Connect to server.
Bonus points. From "Another" Terminal session (NOT the one running ssh), you can start Screen Sharing WITHOUT using the Finder via 'open' command:
open vnc://testaccount@localhost:59222
The -L 59222:localhost:5900 syntax has rules. The 5900 is the Screen Sharing server port number (aka the VNC server port number). The 59222 is a number I picked out of the air. It is less then 65535 and larger than the low numbered well known port numbers, so it is not going to interfere. The 59222 is the port number you tell Screen Sharing, via the Finder or 'open' command, where Screen Sharing can find the Screen Sharing server it is suppose to use. -
Enforcing commit when switching between windows
Today our OracleForms application is built using the call_form built-in. The end user can navigate from FormA to FormB but he must close formB in order to continue work in FormA. This is the expected behavior of the call_form built in. We also ensured that all changes are committed when navigating between forms; posting is not used. This architure/technique ensures that end-users commit frequently; with 400concurrent users we must ensures locking is kept to a minimum. Consequence of this architecture is that we do not have a full MDI application.
In order to have a full MDI application I have to use the open_form built-in but if possible i want to keep 1 session for each application user, not 1 session for each form opened. This in order to prevent an explosion of database sessions. Oke lets use the no_session parameter.
Now what's my problem ? I order to keep locking to a minimum I want to enforce the end user to commit changes when switching between windows. Does somebody has an advice which trigger(s) would be the most appropriate one ?
Note : that the "raise form_trigger_failure" has no effect in the "when-window-deactivated" trigger.
Note : post-form does not fire since I'am not actually leaving the calling form
Note : if possible I would like to program the validation in the calling form instead of the called form; this in order to prevent switching between windows - can cause screen flikkering.
chrisnote the when-window-deactivate does not always fire when switching between windows of different forms !!!
I simply want to keep the focus on the calling form when there are pending changes and throw a message to the enduser saying 'please commit before continuing...'
I tried to program the when-form-navigate trigger but in this trigger I'am not able to retrieve the form_status of the called form.
any other help would be appreciated. -
Dreamweaver 6.1 - JavaScript error when switching between open tabs
When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :
<!-- Browser nav toolbar -->
<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> <!-- Browser nav toolbar -->
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
> -
Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?
Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
How to make my application programmatically switch between English and Russian
Greetings from Colorado...
My application needs to be switchable between English and Russian. Future languages to add are Spanish and Chinese. The user selects a language
from a control before starting the program and then the program changes the Captions, Boolean Texts, Graph Labels, and Enum Type Strings to the
chosen language. For Russian, this requires a different set of characters. I have made substantial progress by:
Control Panels>Region and Language>Keyboards and Languages>Change Keyboards added Russian>Keyboard>Russian on my development
computer.
In the LabVIEW.ini file, I added UseUnicode=TRUE (thanks to a suggestion found in this forum)
Made property nodes for controls and used properties such as Interpret As Unicode (True for Russian, False for English), Text, Font Name, Font Size, etc.
I have used fonts Arial and Arial CYR for Russian and MS Sans Serif for English
Set the keyboard for Russian and enter Cyrillic characters into text constants that are set for Arial or Arial CYR font. Sometimes one works and
sometimes the other works. As long as I set the font name in the property node the same way the text went into the text constant, it generally
works. I wish I could understand why one works sometimes and the other works other times!
I have had trouble with the Boolean Text going off-center when changing fonts and languages and it seems that by setting the Lock Text In Center
property to False and then True again, it seems to work. Often changing Boolean texts between short and long texts causes some of the long text
to be non-displayed; I have remedied this by explicitly setting the width of the Boolean text in a property node.
Often, the Russian text appears as gibberish with strange right-angle characters, :s, =s, and tiny numbers. I have been able to remedy this on my
development computer by ensuring that the text constant on the block diagram has the same size as the caption is supposed to have. This
is not necessary for normal programming in English, but it seems to help here. But it doesn't always solve the problem.
Sometimes the English text appears as Chinese gibberish in an Enum Type selection list or in a graph label. On my development computer,
it seems that making the text the last property to change helps here.
By changing the sequences of assignments to a single property node with a long list of properties, I have been able to make some of these
controls to switch between languages without gibberish showing up.
A few hours ago, I had the Russian strings in the Enum Type control working, except that when selecting from the available items, only the first
word of the Russian string was displayed. Two of the items start with the same word, so the user can't distinguish them.
At that time the English strings were appearing as Chinese gibberish while the list during the selection process displayed in English. As soon
as I changed the selection, future attempts to change the selection gave Chinese gibberish during the selection process, too. But this was only
a problem in the executable version; the source-code version worked fine.
In an attempt to get rid of the Chinese gibberish, I made new constants and retyped the items into them. This worked! But then, the Russian
stopped working and gave gibberish angles and tiny numbers, even though I didn't touch any of the code that sets the properties in Russian mode.
After trying a few sequences of setting the properties for the graph X label on page 2 of my tab control, this label started working correctly for both
languages. But the text of that label comes through on page 1 of the tab control, partly obscured by other controls on that page. After the
program runs a few more seconds, these shadows disappear.
Most times I restart LabVIEW, I get an error message saying there was a crash due to fontmgr.cpp, line 7494. But there actually wasn't a crash.
My computer has Windows 7 64-bit. Deployment Computer has Windows 7 32-bit. LabVIEW version is 8.5.
I have probably 50 or 100 more controls and indicators to change to language programmability and figuring out all this stuff for each one is
terribly time-consuming and there is no assurance that all of them will ever work.
At this point, I'm hoping that I am on an entirely wrong path and someone will send me a clue to get me on a path that is more predictable.
Thanks in advance to all who post ideas!
Cheers
HaldenHi All,
I've made a lot of progress on this translation, but it's been really hard. There are lots of weird things going on that must be logical because they're in a computer, but I can't figure out what the logic is. When changing a font on a caption using the front panel, it sometimes changes the font on the caption and sometimes doesn't although the indicator always indicates the new font. Removing the first character of the unicode font string being sent to the caption seems to help...huh? Anyway, tabs still can't change language programmatically, and niether can ring controls (some kinds will take the new list of strings, but when selecting, they only display the first word of the string!). Boolean text can be reprogrammed, but only if the boolean text is set to be the same for both true and false states. When reprogramming captions on a non-displayed page of a multi-page tab-controlled user interface, the new text appears on the current page until I change pages back and forth. What a pain!
Sooo, NI....does LabVIEW 2011 have support for unicode fonts? Or, is there anything else in the new control style that will support programmatic language changing?
Halden
Maybe you are looking for
-
Hi Experts, None of the ODS objects gets activated and following are the error messages that i get when i try to activate a ODS object : Object ZRSMODS could not be activated <b> "</b> Message no. R7I028 Transfer structure prefix for source system T9
-
Extremely dark screen for no apparent reason
Hi All, I've just bought a MacBook, it's great except for the following issue. Suddenly, while I was browsing using Firefox under MS Windows Vista with Boot Camp (OK, I'm a heretic but let's discuss it another time), the screen went extremely dark. F
-
Renaming session restore backup doesn't work, how do I restore old session after a crash?
Computer crashed and Firefox didn't remember my session. It happened a couple weeks ago so I had looked up how to fix and I learned from my mistake and saved the sessionstore.bak file before restarting Firefox. I closed Firefox, deleted sessionstore.
-
Hi, I am creation reports .But it is taking more time to display reports and data is more in my system. Is there any reporting tool in Oracle So, It gives performance while reports display? Thanks in advance.
-
When I go to close my Firefox browser, I am no longer given the pop-up box & choice to "Save and Quit" (my tabs or open programs), as I had before upgrading to Version 4. I need that feature in the new version. I've looked everywhere I can think of t