Switching between text SMS messages and iMessage

When receiving text messages while on a wifi network my message client responds with iMessages.The recipient us not on a wifi network and does not revive the iMessage replies. Why isn't the iPhone smart enough to respond using the protocol that will guarantee the recipient will most likely get the message?

DCmuseum,
Hi,
You have low free memory left on your device.
Do you have a lot of third party applications on your BB weather, icall,bbalerts etc?
I do not know your experience level, so if you know this I'm sorry but please read and let me
know if this applies.
Most people close the applications by pressing the escape or red key. This does not close the applications.
Each application has a CLOSE option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom CLOSE is listed. Go through each application and press close. Go into the browser press menu and options select cache operations clear all categories and hit escape it will say cleaning memory.
Go to options - security - memory cleaning - enable it. The BB will now clean memory when idle for 5 minutes.
you will have an icon on you screen for memory cleaning make sure you press it. Make sure you use the CLOSE button each time you are done with an application.
Read the link below and follow each step that Tanzim outlines,
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=9225#M9225
If you follow these steps and keep up with your memory your phone will operate smoothly.
Please let us know if you need help with any of the steps.
Thanks
Message Edited by Bifocals on 09-07-2008 11:58 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

Blackberry 8310 Curve randomly deletes text/sms messages and phone logs

Why does this keep happening to me?
There are times that my phone goes over a week without it happening and then there are times like today it has happened three times.
I will have maybe 5 ot 6 text messages in my inbox and maybe 2 or 3 emails and I get a phone call and POOF the text messages and phone logs are gone!
I have repeatedly lost important text messages and numbers from my call log.
The tech support excuse for it is that I have too many messages in my inbox which causes it, but 6 sms messages and 3 emails is too much?
I have tried everything (updating the desktop software, updating all of the settings NOT to delete messages until i delete them, hard booting my phone once a day, etc..) and it still does it.
This also used to happen with my Blackberry Pearl.
If I can't get it resolved, I will just switch to the iPhone. I can deal with the randomly dropped calls, but constantly loosing my call logs and text messages is BEYOND frustrating and Blackberry tech support has been no help!.
Solved!
Go to Solution.

DCmuseum,
Hi,
You have low free memory left on your device.
Do you have a lot of third party applications on your BB weather, icall,bbalerts etc?
I do not know your experience level, so if you know this I'm sorry but please read and let me
know if this applies.
Most people close the applications by pressing the escape or red key. This does not close the applications.
Each application has a CLOSE option. For instance if you are in the calendar hit the menu key (spotted key) and scroll down to the bottom CLOSE is listed. Go through each application and press close. Go into the browser press menu and options select cache operations clear all categories and hit escape it will say cleaning memory.
Go to options - security - memory cleaning - enable it. The BB will now clean memory when idle for 5 minutes.
you will have an icon on you screen for memory cleaning make sure you press it. Make sure you use the CLOSE button each time you are done with an application.
Read the link below and follow each step that Tanzim outlines,
http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=9225#M9225
If you follow these steps and keep up with your memory your phone will operate smoothly.
Please let us know if you need help with any of the steps.
Thanks
Message Edited by Bifocals on 09-07-2008 11:58 AM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problem sending text messages and imessages

Hi,
I have been having some problems with my iphone 5 when sending and receiving text messages and imessages. When i go to send a text or imessage it will take a long time for the message to try to send through, then it comes up with message failure. I have full reception and internet connection and the phone is runing on the lastest ios7.1.2, everything is working in that respect. Sometimes it will freeze my whole inbox and i end up having to turn my phone off and on again to unfreeze it. It has also started taking a long time to receive messages, i will get a message and it will say that it was received 30mins ago when its only just shown up on my phone. I am also having problems deleting messages, as it freezes whenever i try to delete them.
Any suggestions on what to do?

See if anything in this article helps: iOS: Troubleshooting Messages

HT204388 how do I switch between my mac mini and iMac using iMac screen?

how do I switch between my mac mini and i mac using i mac screen? I thought it was using F2 but that does not seem to work.

To switch between your Mac mini and iMac, you just have to turn on or off Target Display mode. To do it, press Command and F2 keys in your iMac, not only F2

Switching between the firewire connection and USB 2.0 Connection

Is it possible to switch between the firewire connection and USB 2.0 Connection on a portable external hard drive? I've tried unsuccessfully to use the firewire connection on my external hard drive after using the 2.0 connection. No machine will read the drive if it is connected via the firewire port. Using USB 2.0 it works as intended.

Hello Grizzly Marmot,
Thank you for the feedback. So probably my old MAXTOR enclosure is playing me tricks ....
Last night the backup on my USB 2.0 was terribly slow ??? The incremental duplication of my hard drive (372.9 MB of data from 35GB of complete data) gave me these stats:
Copied : 6232 files, 372,9 Mo
Average : 8,8 Mo/minute (4,5 copying, 148,1 verifiying)
Just to analyse the drive it takes ±45 minutes ??? Also could the energy saving mode be a slow down factor (the suspension of the computer is NEVER) ???
I still wonder what speed I could experience for a wireless backup to a NAS drive ??
Thanks for helping.
Robert

Switching between the Classic View and the Tree View in transaction FEBA

Hi All
I would like to know how to switch between the Classic View and the Tree View on transaction FEBA for post processing of bank statements. I have a scenario where in the DEV client the transaction is calling up the Tree View and in my QA environment it calls up the Classic View, and I would like to know if there is a way to easily switch between the two views.
I'd appreciate your assistance.

Hi,
I think you can do the same using transaction codes FEBA and FEBAN.
Thanks
Aravind

Why is finder switching between my old username and my new one?

After changing my username finder keep switching between my old one and my new one rapidly. I've tried logging out and back in and rebooting, but other than that, I have no idea how I might fix this. A video of the issue can be found here: http://www.youtube.com/watch?v=oU661gxKtqY

I think you have Fast User Switching switched on, and it's causing your user name to toggle like you were logged into both accounts at the same time.
Try and turn it off, just to see if that cures the problem. Go to System Preferences>Users&Groups>Click on lock to unlock, then on Login Options. Check off Fast User Switching. I have no clue if this is a cure, but let's see.

I need help. I need a KVM to switch between my Mac Pro and my IBM ThinkPad (docking station).

I need help. I need a KVM to switch between my Mac Pro and my IBM ThinkPad (docking station).
Best Buy (only local option) has only a VGA / USB from iogear that scroll lock doesn't work on the Mac and low and behold I'm a d.a. and didn't notice VGA, ie: want/need DVI.
I don't game on my Mac or do high-end video editing but don't want to step down the video quality too much.
Appreciate all of the forthcoming advice.
Jason

I guess I should have clarified and said "can you please share what you've used and been successful with"
Two that I have been considering are:
ConnectPRO
http://www.connectpro.com/prod_kvm_usb12plusDvi.html
IOGear
http://www.iogear.com/solutions/kvm/?view=displayDVI
If you do the Belkin KVM wizard, as soon as you reference a Mac, they only support VGA and I am not sure why. http://www.belkin.com/kvm/
Thanks for the effort.
Jason

Switch between frontpanel of MainVI and frontpanel of SubVI

Everybody,
I want to Switch between frontpanel of MainVI and frontpanel of SubVI.Detailedly,when i call the subVI in the MainVI,hide frontpanel of the MainVI,And show the frontpanel of the MainVI when i close the subVI.Like LV.I have a unsuccessful example.
Using LabVIEW 8.0.0 on Windows XP
Attachments:
HidePanel.zip ‏19 KB
HidePanel_MainVI2.JPG ‏39 KB
HidePanel_SubVI1.JPG ‏21 KB

Hello Richar,
instead of 'FP.Open' you can use the property 'FP.State' to hide the main vi. You only have to set this property in the subvi. To show the subVi you have to set the properties in the vi properties dialog (right click on icon): window appearance-> show when called & close afterwards.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Difference between a persistent messages and non persistent messages in JM

Hi
This question is with respect to persistent messages , and non persistent messages .
As per the docs it says that for persistent messages the QueueSender.send() blocks until it recivies an acknowledgement .
Here my question is what is the difference between a persistent messages , and non persistent messages
Thanks in advance .

The exact behaviour depends on the JMS provider being used. But since non-persistent messages are defined to be unreliable, the provider may indeed decide that it's not necessary for the server to acknowledge the receipt of a non-durable message from a producer.
Nigel

Does anyone know what triggers the switch between text and iMessage in the middle of a conversation? Are there any differences in billing between text and iMessage?

In the middle of a text conversation between another iOS 5.0 iPhone user and myself, the conversation elements switched back and forth several times between Text and iMessage. The phone actually tracked it and put little lines indicating the switch, and my comments changed from green to blue and back again. I can't think of anything I changed in the middle of the conversation. I was outside WiFi range, using the Cell network at the time. Now I tried it again, while i'm on WiFI and the messages are Text (green) again.

1. Windows 8.1 Enterprise w Update is the best. It allows you for sideloading in corporate environment without additional tools and licenses.
http://technet.microsoft.com/en-us/windows/jj874388.aspx
2. N series is for EU (without IE).
3. Profesional is fine, but you will need some tools to achieve the same functionality that you have in "pack" Enterprise.
4. VL is volume license, a type of license for multiple computers (to say it simply)
5. MSDN forum is better alternative for problems like this.
6. Attached to MSDN are licenses or at least references to web resources. Read license agreements carefully and let your installation and use follow the license.
Rgds
Milos

Text messages and imessages marked as delivered yet not received since last update. I cannot make sense of the troubleshooting page, why does this complex machine not just work?.

I updated my iphone -again, and now my girlfriend (and who knows who else) is not reliably receiving messages. I try sending as iMessage and as SMS and have iMessage checked in my options and send as text message if iMessage doesn't work also checked. It was working fine, I updated, now it's patchy at best and although messages are marked as delivered they aren't and I don't know unless I phone the recipient up. Have tried restarting, resetting and digging through the trouble shooting pages... Apple products used to just work, now my phone is like a puzzle that I have to solve. I'm ditching apple in October when my contract is up but would like to send texts in the meantime, any ideas?

Awesomez. Thanks apple support community, very helpful indeed. About as helpful as a phone that stops sending texts after the manufacturers update it. No worries though, I got a HTC yesterday, put my sim in and guess what? It works. Close this thread down thanks mods.

Not able to send or receive SMS messages on iMessage on mac

When I first updated to Yosemite the new SMS feature on iMessage was working. I had to replace my home button and screen on my iPhone 5s and after that it stopped working. I am not sure if having that repair done on my phone has anything to do with my above problem. Please help

Hi Ralph,
Thank you for your reply.
Ok, I will try to explain myself better.
When I say:
- Messages, I am talking about the software to send and receive iMessages and SMS.
- iMessage, is the blue bubble
- SMS is the green bubble
Facetime is because if someones callsme and I do not answer quickly on iPhone, and the Macs are using the same network as iPhone, the VoiceCall pops ups and rings, and usually I activate the Facetime option (when is a iPhone). Sorry about this confusion.
So basically, a week ago, I could send and receive SMS, iMessage on my Macs to/from anyone.
Now, I just can send iMessages (blue bubbles with blue name/contact on top [TO:]) and I can't send SMS (text messages, green bubble), I receive error (red exclamation point) and the name/contacts on top [To:] are red.
And as I told, I think it might be because of the new iOS update with iTunes recovery. Because it is the only similar thing I can relate with "loyalchiver" (when an iPhone goes to repair, the restore it.) That's why I tried signout/in in all Macs, but still not working.
About the Text Forwarding function, I had searched and what I was getting was to go to Settings > Messages > Text Message Forwarding, but this last option didn't appear, so I thought this was because the pages/foruns that I was reading was for the version 8.1 and not 8.1.1 (Apple could change it, I don't know). But while I was trying to put this working, I had rebooted some where and when I saw your reply, I went again there, and I had the Text Message Forwarding option, so all I had to do was activating it. Thank you!
To "labelchiver", I am not sure how I did it, but try this:
1. close all applications running on background.
2. reboot your iphone.
3. go to Settings > Messages > Text Message Forwarding .
4. If you can enter there and your mac is linked, unlink it and link it again.
5. Hope it works for you
Once again, thank you for your help and I apologize for my confusions about the labels. Cheers!

[AS-CS5] Comparison between text style range and character style

Hi,
It's been a while since I'm not coming on this forum ...
I'm looking to make a comparison between a "text style range" and a character style.
I have no problems, except for the comparison of "fonts".
myCurrentText = text for char…
theStyle = character style id…
I try:
       if (applied font of myCurrentText ≠ applied font of theStyle) then set theCharDifference to 1
The selected text give me:
       font "Minion Pro        Italic" of application "Adobe InDesign CS5.5"
and the character style:
       "Minion Pro"
I try "set theTextFont to font of applied font of myCurrentText" -> Error
This is my script (it's too long to post here) <http://db.tt/BLoGPiN>.
Loot at the "on CheckCharacterDifference(myCurrentText, theStyle)"
TIA.
Oli.

I've written this, but I do not know if it covers all cases ...
Someone?
Thanks.
Oli.
set theText to item 1 of selection
set theStyleChar to properties of character style 2
-- analysis of the properties of the text
set myTextFontApplied to applied font of theText
set myTextFontFamily to font family of applied font of theText
set myTextFontStyle to font style of theText
-- analysis of the character style
set myStyleCharFontStyle to applied font of theStyleChar
if myStyleCharFontStyle = "" then
     set myStyleCharFontStyle to font style of theStyleChar
     if myStyleCharFontStyle ≠ myTextFontStyle then set theDifference to true
else
     if myStyleCharFontStyle ≠ myTextFontFamily then set theDifference to true
end if
Message was edited by: OlivierBerquin

Not Receiving Text (SMS) Messages (On Rogers Network)

I have recently been experiencing trouble with my iPhone 4s. I would send text messages, however, the recipient would receive them, text me back and I would not get their texts back. After a few days or so, I would receive all the texts I did not receive in bulks. This has happened a few times already. My friends/family members who own a Blackberry have been receiving a notification that there is network congestion. (However, iPhone or Android users do not receive the same notification). No one I know is experiencing the same problem as I am.
I am on the Rogers network, texting phones (Blackberrys, iPhones, Androids) on the Fido, Rogers, Telus and Bell networks.
Is this a network problem or a phone problem?

I am having the exact problem - also a Rogers Customer with an iPhone 4S.   The rest of my family have Blackberrys (on Rogers, and Koodo).    When they text or BBM each other they each receive each others messages immediately.    When I try to text them, most times they receive the text after a delay which can be several minutes or up to a few hours.   Oddly, when they respond to the text, I receive the response immediately.
I believe this to be a hardware related issue, and am trying to isolate when it happens.    BTW - I get a similar problem with email - where it will not send and eventually goes to the outbox.    I have to resend and sometimes have to disconnect from the network (by turning on Airplane Mode) then re-connect before the emails get sent.
BTW, I am not running IOS 6 yet because I do not want to lose Google maps.   Running - 5.1.1

Switching between text SMS messages and iMessage

Similar Messages

Maybe you are looking for