Switching between the Classic View and the Tree View in transaction FEBA

Hi All
I would like to know how to switch between the Classic View and the Tree View on transaction FEBA for post processing of bank statements. I have a scenario where in the DEV client the transaction is calling up the Tree View and in my QA environment it calls up the Classic View, and I would like to know if there is a way to easily switch between the two views.
I'd appreciate your assistance.

Hi,
I think you can do the same using transaction codes FEBA and FEBAN.
Thanks
Aravind

Similar Messages

HT4623 after the ios 7.0 update my iphone 4s and ipad keep switching in between the home screen and the apple loading screen, can anybody help?

Can anybody help with the above?
i.e
both my iphone 4s and ipad switch in between the home screen and the apple loading screen
Many thanks

I would connect each device to a power source, and then reset them by holding the power button and the home button until they turn off.
If it keeps happening, I would put the devices in recovery mode and restore them with iTunes.
This article will help with that if needed:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808

What is the differenec between 'sap list viewer' and 'abap list viewer'

hi
what is the differenec between 'sap list viewer' and 'abap list viewer'

Hi,
There is no difference between them.SAP List Viewer (ALV) is the new name of the ABAP List Viewer (ALV).
The SAP List Viewer unifies and simplifies the use of lists in the R/3 System. A uniform user interface and list format is available for all lists. This prevents redundant functions.
The SAP List Viewer can be used to view both single-level lists and multilevel sequential lists.
Single-level lists contain any number of lines that have no hierarchical relationship to each other.
Multilevel sequential lists consist of any number of lines that have two hierarchical levels. Multilevel lists have header rows and item rows; the item rows are subordinate to the header rows. For each header row there can be any number of subordinate item rows.
You can view subtotals and totals rows in both single-level lists and multilevel sequential lists
From End User Point it is SAP LIST viewer , From Developer Point of View it is ALV .
Check the Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/66/bc7aab43c211d182b30000e829fbfe/frameset.htm
Regards,
Satish

I switched to the classic 'landscape' and when i reboot, it just stays at the greay screen, with the macintosh logo, and a blinking question mark. ive tried several methods of key combinations with rebooting etc.. i just bought this. please help.

i switched to the classic 'landscape' and when i reboot, it just stays at the greay screen, with the macintosh logo, and a blinking question mark. ive tried several methods of key combinations with rebooting etc.. i just bought this. please help.
I bought this off of craigslist with my christmas money, TODAY. i really need help, i have OS X experience from school, just not OS 9x. I need to reboot back to OS X asap. anything that may help is very appreciated. Thank You.
Chris.

Are you able to start up in Safe Mode?
http://support.apple.com/kb/HT1455?viewlocale=en_US
If this works you will see the normal desktop Once completely started up in Safe Mode, try to restart normally and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless it has been renamed). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if you are able to do a little hard drive maintenance to help things out.

Ipod nano 4th generation switches between the Apple logo and the menu

I have a 4th generation 8 g iPod Nano that probably has about 1 hour of use since my wife won it in a raffle over a year ago. When I went to recharge it yesterday, the only thing that happens is that the display, when connected to the computer, flips back and forth between the Apple logo and the menu screen. Whenever either one of them appears, it will disappear in a few seconds, then repeat the sequence. I have done a reset and restore,and installed the latest software version but the same thing happens over and over again. If the iPod is detached from the computer, ie, its power source, NOTHING happens on the display. It black and you can't get it to show anything. My theory was that the battery needed to be replaced even though it wasn't used much in the year since she got it. In fact. the absence of use and recharging it and discharging it may have lead to this problem in the first place. However, my one issue with that theory is that, when connected to a power source, like the computer, I would think I could get it to function normally, which I can't. I was able to get to the "service menu" which won't disappear when I move about different choices, as long as its connected to the computer. Again I can get nothing if its not connected to a power source.. does anyone think that this problem could be solved by replacing the battery or does it seem like that is only part of the problem? Thanks for any help and suggestions you may have to offer.
Geoff

Despite the Nano only being used for an hour or so, the battery needed to be replaced= problem solved!!

Is it possible to use booleans to build a VI that uses buttons to switch between screens (3 only) while the other screens disappear?

As a beginner, I need help figuring out how to build a simply VI that uses boolean logic to switch between three different screens. I need a "Home" screen, the next screen which has a button to go back "Home" and a third screen which has two buttons to go "Home" and "Previous Screen". Can someone help me with a simple block diagram?

Hi,
Or put the data in three tab controls. The tabs itself are hidden. The
program switches between the tab sheet if one of the buttons is pressed.
The buttons are best not copied, e.g. the same buttons are used in every tab
sheet (buttons hover above the tab, a black shadow will apear). If the first
sheet is shown, button 2 and 3 are hidden, sheet two: only button 3 is
hidden, sheet three no button is hidden.
Showing the tabs allows the user to choose the views directlly. The button
logic is not needed anymore. But you'll have to live with a simple tab
sheet, instead of a fancy button system!
Regards,
Wiebe.
"Jason R" wrote in message
news:[email protected]...
> Another solution if you want to avoid property-node hell...
>
> Divide your screen into 1/4ths. That is, make your FP 4x larger than
> your desktop.
>
> Place screen 1 on the upper left quadrant.
> Place screen 2 on the upper right quadrant.
> Place screen 3 on the lower left quadrant.
> Screen 4 (lower right quadrant) is unused.
>
> Disable the ability to scroll at run time.
>
> As the user clicks buttons, use the properties of this vi to move what
> the user can see on the front panel.
>
> Cheating? yep. Easier? yep.
>
> Hope this helps! =)
>
> btw - be sure not to update the FP controls when they are not visible,
> or this will eat processor cycles.
>
> Sincerely,
> Jason G Richmond
> Project Engineer II and LVAAD Instructor
> VI Engineering
> [email protected] (domain should be vieng.com (no A's))
>
>
> missileman wrote:
> > Is it possible to use booleans to build a VI that uses buttons to
> > switch between screens (3 only) while the other screens disappear?
> >
> > As a beginner, I need help figuring out how to build a simply VI that
> > uses boolean logic to switch between three different screens. I need a
> > "Home" screen, the next screen which has a button to go back "Home"
> > and a third screen which has two buttons to go "Home" and "Previous
> > Screen". Can someone help me with a simple block diagram?
>
>

What are differences between the target tablespace and the source tablespac

The IMPDP command create so manay errors. But the EXAMPLE tablespace is transported to the target database successfully. It seems that the transported tablespace is no difference with the source tablespace.
Why create so many errors?
How to avoid these errors?
What are differences between the target tablespace and the source tablespace?
Is this datapump action really successfull?
Thw following is the log output:
[oracle@hostp ~]$ impdp system/oracle dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
Import: Release 10.2.0.1.0 - Production on Sunday, 28 September, 2008 18:08:31
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "SYSTEM"."SYS_IMPORT_TABLESPACE_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_TABLESPACE_01": system/******** dumpfile=user_dir:demo02.dmp tablespaces=example remap_tablespace=example:example
Processing object type TABLE_EXPORT/TABLE/TABLE
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
CREATE TABLE "OE"."CUSTOMERS" ("CUSTOMER_ID" NUMBER(6,0), "CUST_FIRST_NAME" VARCHAR2(20) CONSTRAINT "CUST_FNAME_NN" NOT NULL ENABLE, "CUST_LAST_NAME" VARCHAR2(20) CONSTRAINT "CUST_LNAME_NN" NOT NULL ENABLE, "CUST_ADDRESS" "OE"."CUST_ADDRESS_TYP" , "PHONE_NUMBERS" "OE"."PHONE_LIST_TYP" , "NLS_LANGUAGE" VARCHAR2(3), "NLS_TERRITORY" VARCHAR2(30), "CREDIT_LIMIT" NUMBER(9,2), "CUST_EMAIL" VARCHAR2(30), "ACCOUNT_MGR_ID" NU
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
ORA-39117: Type needed to create table is not included in this operation. Failing sql is:
CREATE TABLE "IX"."ORDERS_QUEUETABLE" ("Q_NAME" VARCHAR2(30), "MSGID" RAW(16), "CORRID" VARCHAR2(128), "PRIORITY" NUMBER, "STATE" NUMBER, "DELAY" TIMESTAMP (6), "EXPIRATION" NUMBER, "TIME_MANAGER_INFO" TIMESTAMP (6), "LOCAL_ORDER_NO" NUMBER, "CHAIN_NO" NUMBER, "CSCN" NUMBER, "DSCN" NUMBER, "ENQ_TIME" TIMESTAMP (6), "ENQ_UID" VARCHAR2(30), "ENQ_TID" VARCHAR2(30), "DEQ_TIME" TIMESTAMP (6), "DEQ_UID" VARCHAR2(30), "DEQ_
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SH"."CUSTOMERS" 9.850 MB 55500 rows
. . imported "SH"."SUPPLEMENTARY_DEMOGRAPHICS" 695.9 KB 4500 rows
. . imported "OE"."PRODUCT_DESCRIPTIONS" 2.379 MB 8640 rows
. . imported "SH"."SALES":"SALES_Q4_2001" 2.257 MB 69749 rows
. . imported "SH"."SALES":"SALES_Q1_1999" 2.070 MB 64186 rows
. . imported "SH"."SALES":"SALES_Q3_2001" 2.129 MB 65769 rows
. . imported "SH"."SALES":"SALES_Q1_2000" 2.011 MB 62197 rows
. . imported "SH"."SALES":"SALES_Q1_2001" 1.964 MB 60608 rows
. . imported "SH"."SALES":"SALES_Q2_2001" 2.050 MB 63292 rows
. . imported "SH"."SALES":"SALES_Q3_1999" 2.166 MB 67138 rows
Processing object type TABLE_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."REGIONS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."REGIONS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."COUNTRIES" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."COUNTRIES" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."LOCATIONS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."LOCATIONS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."DEPARTMENTS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."DEPARTMENTS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOBS" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOBS" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."EMPLOYEES" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."EMPLOYEES" TO "EXAM_03"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'USER1' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOB_HISTORY" TO "USER1"
ORA-39083: Object type OBJECT_GRANT failed to create with error:
ORA-01917: user or role 'EXAM_03' does not exist
Failing sql is:
GRANT SELECT ON "HR"."JOB_HISTORY" TO "EXAM_03"
ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type OBJECT_GRANT:"OE" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/INDEX
ORA-39112: Dependent object type INDEX:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_LNAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"OE"."CUST_EMAIL_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type INDEX:"PM"."PRINTMEDIA_PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_CREDIT_LIMIT_MAX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMER_ID_MIN" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"OE"."CUSTOMERS_PK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type CONSTRAINT:"PM"."PRINTMEDIA__PK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type CONSTRAINT:"IX"."SYS_C005192" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUSTOMERS_PK" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_ACCOUNT_MANAGER_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_LNAME_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_EMAIL_IX" creation failed
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"PM"."PRINTMEDIA_PK" creation failed
Processing object type TABLE_EXPORT/TABLE/COMMENT
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type COMMENT skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/CONSTRAINT/REF_CONSTRAINT
ORA-39112: Dependent object type REF_CONSTRAINT:"OE"."CUSTOMERS_ACCOUNT_MANAGER_FK" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39083: Object type REF_CONSTRAINT failed to create with error:
ORA-00942: table or view does not exist
Failing sql is:
ALTER TABLE "OE"."ORDERS" ADD CONSTRAINT "ORDERS_CUSTOMER_ID_FK" FOREIGN KEY ("CUSTOMER_ID") REFERENCES "OE"."CUSTOMERS" ("CUSTOMER_ID") ON DELETE SET NULL ENABLE
ORA-39112: Dependent object type REF_CONSTRAINT:"PM"."PRINTMEDIA_FK" skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
Processing object type TABLE_EXPORT/TABLE/TRIGGER
ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."SECURE_EMPLOYEES" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
ORA-39082: Object type TRIGGER:"HR"."UPDATE_JOB_HISTORY" created with compilation warnings
Processing object type TABLE_EXPORT/TABLE/INDEX/FUNCTIONAL_AND_BITMAP/INDEX
ORA-39112: Dependent object type INDEX:"OE"."CUST_UPPER_NAME_IX" skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_AND_BITMAP/INDEX_STATISTICS
ORA-39112: Dependent object type INDEX_STATISTICS skipped, base object type INDEX:"OE"."CUST_UPPER_NAME_IX" creation failed
Processing object type TABLE_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"OE"."CUSTOMERS" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"PM"."PRINT_MEDIA" creation failed
ORA-39112: Dependent object type TABLE_STATISTICS skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Processing object type TABLE_EXPORT/TABLE/INDEX/DOMAIN_INDEX/INDEX
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCACT_INSTANCE
ORA-39112: Dependent object type PROCACT_INSTANCE skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39083: Object type PROCACT_INSTANCE failed to create with error:
ORA-01403: no data found
ORA-01403: no data found
Failing sql is:
BEGIN
SYS.DBMS_AQ_IMP_INTERNAL.IMPORT_SIGNATURE_TABLE('AQ$_ORDERS_QUEUETABLE_G');COMMIT; END;
Processing object type TABLE_EXPORT/TABLE/POST_INSTANCE/PROCDEPOBJ
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_V" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_N" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE_R" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."AQ$_ORDERS_QUEUETABLE_E" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
ORA-39112: Dependent object type PROCDEPOBJ:"IX"."ORDERS_QUEUE" skipped, base object type TABLE:"IX"."ORDERS_QUEUETABLE" creation failed
Job "SYSTEM"."SYS_IMPORT_TABLESPACE_01" completed with 63 error(s) at 18:09:14

Short of trying to then reverse-engineer the objects that are in the dump file (I believe Data Pump export files contain some XML representations of DDL in addition to various binary bits, making it potentially possible to try to scan the dump file for the object definitions), I would tend to assume that the export didn't include those type definitions.
Since it looks like you're trying to set up the sample schemas, is there a reason that you wouldn't just run the sample schema setup scripts on the destination database? Why are you using Data Pump in the first place?
Justin

How can I return to the Classic address book 3 pane view?

How can I return to the Classic address book 3 pane view & get rid of the stupid fake leather and same for iCal?

I asked the same question at the Apple Genius Bar a week or so ago and they said there was no way to change it. I am with you - do not like this new format at all and would love it if Apple would offer both -maybe when they do an "fix" next? This was one change in Lion that should not have been made from Snow Leopard. I am really sorry I upgraded at this point.

Is there a way to switch between workspaces in Spaces from the command line? I want to write a script to set up certain applications in certain workspaces (without having to do it manually each time)...

Is there a way to switch between workspaces in Spaces from the comnand line? I use several workspaces from Spaces, each workspace having a certain number of fixed applications running. Rather than set all this up each time I log on, I'd like to write a script from the command line (I use gawk) to automate this. Currently I have a gawk script that, given a directory, opens a few xterms whose working directory is the given directory, and opens "preview" applied to a certain file in that directory. However, at present I have to manually move an xterm through each workspace and run my gawk script in each workspace (applied to each directory that I'm working on).
There must be a better way...

Addendum: Can this be done via: open -a Spaces --args xxx , where xxx is some set of arguments (or something like this)?

HT3964 I am not able to reboot my Mac desktop. When I switch on the Mac, I get a white screen with the Apple logo and the little wheel below that goes round and round but the computer refuses to boot.

Hi, I am not able to reboot my Mac desktop.
When I switch on the Mac, I get a white screen with the Apple logo and the little rotating circle.
The system refuses to boot.
What can I do?
Marcus

We need to get you moved. This forum is for mini-tower Macs built between 1998 and 2005 and doesn;t get as much traffic ("eyeballs on the problem") as the forums for newer Macs.
Please do "About this Mac" from you Apple menu and tell us what that says for "processor" and Mac OS version. Looks like this:
or this for later Mac OS versions:
With that we can figure out which of the two iMac forums you need and get the Hosts to move your post.

Why doesn't the rotate gesture on my trackpad behave as it used to for switching between tabs when it works the same with all other programs besides Firefox?

Why doesn't the rotate gesture on my trackpad behave as it used to for switching between tabs when it works the same with all other programs besides Firefox?
I changed the about:config to make the rotate gesture move between tabs, and it worked great for well over a year. Now it behaves erratically as described here:
https://bugzilla.mozilla.org/show_bug.cgi?id=877598
It used to be very controllable to move one tab over, now it is erratic and moves quickly and to unexpected tabs regardless of how slow I do the rotate gesture. This is the main reason I use Firefox over Chrome and I would like to continue to do so unless there is no fix to this.

Just set the browser.gesture.twist.threshold to something around 15-25.

What's the difference between the triangle icon and the square icon on the

What's the difference between the triangle icon and the square icon on the Bookmarks Bar, and how do you make the square thing happen?

Both mean that the bookmark is a group or folder of multiple addresses.
The triangle is the default setting, meaning that usually you click and choose a single address to open in the group. You can also right-click on the group name to select "Open in Tabs" to see ALL the addresses open in individual tabs.
The square is this behaviour (open all addresses in tabs) fixed, so that it ALWAYS opens that way, even with a left click. If you want to access an individual address now, you have to use option-click.
To switch between triangle and square, open your bookmarks screen (the book icon on the far left of the bookmarks bar, or Bookmarks menu - Show all Bookmarks, select the group you want to change, and tick the box marked "Auto-Click". You can of course switch back to triangle (default) behaviour in the same way.
Matt

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

Getting Error The trust relationship between the primary domain and the trusted domain failed in SharePoint 2010

Hi,
SharePoint 2010 Backup has been taken from production and restored through Semantic Tool in one of the server.The wepapplication of which the backup was taken is working fine.
But the problem is that the SharePoint is not working correctly.We cannot create any new webapplication ,cannot navigate to the ServiceApplications.aspx page it shows error.Even the Search and UserProfile Services of the existing Web Application is not working.Checking
the SharePoint Logs I found out the below exception
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.78 WebAnalyticsService.exe (0x06D4)        0x2D24 SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Database
8u1d High    Flushing connection pool 'Data Source=urasvr139;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
11/30/2011 12:14:53.79 WebAnalyticsService.exe (0x06D4)        0x12AC SharePoint Foundation         Topology
2myf Medium Enabling the configuration filesystem and memory caches.
11/30/2011 12:14:55.54 mssearch.exe (0x0864)                   0x2B24 SharePoint Server Search      Propagation Manager
fo2s Medium [3b3-c-0 An] aborting all propagation tasks and propagation-owned transactions after waiting 300 seconds (0 indexes) [indexpropagator.cxx:1607] d:\office\source\search\native\ytrip\tripoli\propagation\indexpropagator.cxx
11/30/2011 12:14:55.99 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    The SPPersistedObject with
Name User Profile Service Application, Id 9577a6aa-33ec-498e-b198-56651b53bf27, Parent 13e1ef7d-40c2-4bcb-906c-a080866ca9bd failed to initialize with the following error: System.SystemException: The trust relationship between the primary domain and the trusted
domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection
sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()
at Microsoft.SharePoint.Administration.SPAcl`1.Add(String princip...
11/30/2011 12:14:55.99* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
75dz High    ...alName, String displayName, Byte[] securityIdentifier, T grantRightsMask, T denyRightsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider
persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Topology
8xqx High    Exception in RefreshCache. Exception message :The trust relationship between the primary domain and the trusted domain failed.
11/30/2011 12:14:56.00 OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable The following error occured while trying to initialize the timer: System.SystemException: The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection
sourceSids, Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, Byte[] securityIdentifier, T grantRightsMask,
T denyRightsMask)     at Microsoft.SharePoint.Administrati...
11/30/2011 12:14:56.00* OWSTIMER.EXE (0x1DF4)                   0x1994 SharePoint Foundation         Timer
2n2p Monitorable ...on.SPAcl`1..ctor(String persistedAcl)     at Microsoft.SharePoint.Administration.SPServiceApplication.OnDeserialization()     at Microsoft.SharePoint.Administration.SPIisWebServiceApplication.OnDeserialization()
at Microsoft.SharePoint.Administration.SPPersistedObject.Initialize(ISPPersistedStoreProvider persistedStoreProvider, Guid id, Guid parentId, String name, SPObjectStatus status, Int64 version, XmlDocument state)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(Guid
id, Guid parentId, Guid type, String name, SPObjectStatus status, Byte[] versionBuffer, String xml)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.GetObject(SqlDataReader dr)     at Microsoft.SharePoint.Administration.SPConfigurationDatabase.RefreshCache(Int64
currentVe...
Please guide me on the above issue ,this will be of great help
Thanks.

I have same error. Verified for trust , ports , cleaned up cache.. nothing has helped.
The problem is caused by User profile Synch Service:
UserProfileProperty_WCFLogging :: ProfilePropertyService.GetProfileProperties Exception: System.SystemException:
The trust relationship between the primary domain and the trusted domain failed.       at System.Security.Principal.SecurityIdentifier.TranslateToNTAccounts(IdentityReferenceCollection sourceSids,
Boolean& someFailed)     at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType, Boolean forceSuccess)     at System.Security.Principal.SecurityIdentifier.Translate(Type
targetType)     at Microsoft.SharePoint.Administration.SPAce`1.get_PrincipalName()     at Microsoft.SharePoint.Administration.SPAcl`1.Add(String principalName, String displayName, SPIdentifierType identifierType, Byte[]
identifier, T grantRightsMask, T denyRigh...
08/23/2014 13:00:20.96*        w3wp.exe (0x2204)
        0x293C        SharePoint Portal Server              User Profiles
        eh0u        Unexpected        ...tsMask)     at Microsoft.SharePoint.Administration.SPAcl`1..ctor(String persistedAcl)
at Microsoft.Office.Server.Administration.UserProfileApplication.get_SerializedAdministratorAcl()     at Microsoft.Office.Server.Administration.UserProfileApplication.GetProperties()     at Microsoft.Office.Server.UserProfiles.ProfilePropertyService.GetProfileProperties()
Please let me know if you any solution found for this?
Regards,
Kunal

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

If you mean the drop marker then you can still get the History of the Back and Forward buttons if any by either Left-Click and hold for a second or by Right-Clicking them.
If you still want the drop mark there also then there is this Extension at https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Also the abbreviation for Firefox is '''Fx'''

Switching between the Classic View and the Tree View in transaction FEBA

Similar Messages

Maybe you are looking for