Switching BW authorization concept back and forth on the fly

After upgrading to BW 7.0, we are currently developing the BW authorizations from scratch with the new analytical authorizations. The system is currently set to the legacy RSR authorization objects. The idea is now to define two timeframes on our development system, one for the users working with old authorizations, and a second timeframe for testing the new analytical authorizations.
Can we switch the authorization concept back and forth on the fly, or are there any obstacles?
Thanks in advance!

Andreas,
The latest version of BW is 7.3 which is also Analysis authorization concept like 7.0. So please clarify from the system status what level are you upgrading to.
Under 7.0, the RSR objects were still available i.e. you can switch the concept back and forth on the fly, it will trigger a transport. AFAIK - In 7.3 however there is no support for RSR anymore in fact even the object class is not visible and so does the switch for the concept and even RSR objects (Z-objects) do not show up in PFCG either.
So if you are moving to 7.0 switch is possible, 7.3 it is not. But in either case, you should be upgrading using a dual landscape with upgrade work being done & tested in separate boxes than daily production support landscape. It will come in handy at the time of testing also.
Regards,
Shivraj Singh

Similar Messages

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

I have an IPod 2nd generation I bought from a pawn shop. It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle. I had it on charge all night but still dead.

Try here.
iPod touch: Hardware troubleshooting
You may have a hardware problem.

Need multiple 'MAIL' Icons. Have two mail accounts and i want to keep them separate but want to EASILY switch back and forth from the main screen instead of going through, Settings, Mail, and selecting account. Major pain

Have two mail accounts and i want to keep them separate but want to EASILY switch back and forth from the main screen instead of going through, Settings, Mail, and selecting account. Major pain the butt. This has been a request from Apple users for many years. it's great you can now combine all emails into one, but some people want them kept separate and have separate icons on the main page. They could easily do this by having one "MAIL" account as white and another red. Or put MAIL 1 and MAIL 2. Or an actual label that the mail accounts are called on the ICONS!!
Help!

eshghoolak wrote:
...I could switch back and forth between accounts while in the mailbox, with one button. I think that is what you are referring to? Whoever said it's just a simple switching - you obviously haven't had the pleasure of using an Android device. It's not that quick to go back and forth - definitely not efficient...
Not that it matters a lot, Android vs iPhone interface is largely a matter of personal preference and what you know... I'm not sure which one you're saying is not efficient...
In any event...
I currently have two email accounts setup. My iPhone main page Mailbox settings reads:
Mailboxes
Inboxes
All Inboxes
Gmail
[email protected]
Accounts
Gmail
[email protected]
I wish there an efficient way to move back and forth while in the "Inbox" between accounts. Also, Why does one gmail account show as "Gmail" and another as the actually address?
The names are based on the names you gave the accounts when you set them up.
Settings>Mail, Contacts, Calendars.
Tap the account you want to re-name. Go to the "Description" field and put in what ever you want.
Second, there is no way to quickly choose a bunch of emails to delete. I have to manually go into each one and move it to the Trash folder.
If you tap the edit button in the upper right while in mail, you can select multiple items to move, delete or mark (flag).
I don't want any of the condescending remarks, that I've read here and in other forums. I'm honestly looking for a solution, which I think you are too! One thing I realized is that iPhone users in these forums are really defensive and quick to say "that's how it is, live with it, if you don't like it go away" Um...the only thing that tells me is you are pretty bitter and have kept telling yourself that, to force yourself to like your device. I prefer to express my issues, and find solutions. There is ALWAYS a solution...
I think what you will find is that many people here, myself included, tend to get a bit short with people who start off with attacks or whining about how something has been asked for for years and should be easy, rant about things that have already been beaten to death multiple times in the forums, talk about how much better Android or BB are at something (really... if it's that much better, why did they buy an iPhone to begin with?), etc., or continue to ask questions that could easily be answered with a simple search, or even just by looking back at the last dozen posts to the forum, half of which probably asked the EXACT SAME question.
I don't think any of us go out of our way to be rude or uncivil. That said, attacking the people who are attempting to help you is much more likely to generate a response of 'if you don't like it, go away', than it is to generate something that will be truly helpful.

Is there a way to keep the checkmark or initials (Sign toolbar) active so that I can check a whole list of items without going back and forth to the button?

Is there a way to keep the checkmark or initials (Sign toolbar) active so that I can check a whole list of items without going back and forth to the button?

There is another way to "popup" the screen. Mute and then
unmute the cellphone.
Sheng-Chieh

How do I toggle back and forth from the live site in the tutorial to the working site?

How do I toggle back and forth from the live site in the tutorial to the working site?

I think that if you scroll down the page to the third video, you will find what you're looking for.
Best regards,
Randy Nielsen
Product Integration Manager, Creative Cloud Learning
Adobe

I was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its not on

hey please help!
i was using my ipad it was under 10% but no under 4% it turned off then i pluged the charger in and flashed on then showed apple sign after i turned it on. now its going back and forth from the apple sign and battery symbol ive changed chargers its made no differnce its been like 3 hours ive tried to do that reset thing holding lock button and home button for 10 seconds at the same time. WHAT DO I DO?

Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Prior to updating the iphone 5 to ios.7, i used to be able to go to Notes and scroll through all listings until I found what I wanted. Now i am only able to view one page at a time and have to back and forth between the main menu and each page. Help?

Prior to updating my iPhone5 to the "new and improved" ios.7, I used to be able to go to my Notes app and scroll through the various categories until I found the item I was looking for. Now, under the "improvements" I have to open each page, one at a time, until I find the desired category. This strikes me as a big step backword. Any solutions in the community?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.

I want to work on my web-site and switch back and forth between the public view and the admin view but Firefox keeps closing one of them - how do I disarm this?

Before upgrading to this version of Firefox I could simultaneously have my public version and my admin version of my web-site open. I could make changes in the admin version and then check to make sure the public version registered and displayed the changes just as I wanted them. Now it keeps switching so both of them are public or both of them are admin. I want to know how to disarm this function. Thanks!

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

I can't find my camera on my iPad mini, and I can't slide it back and forth on the restrictions

Idk what happened but my camera, App Store and more are not even enabling even when I go to the restrictions. It's like completely disabled.

What do you mean by they are not enabling? Did you have restrictions turned on for these apps? Do they appears as greyed out on your screen? Or did they totally disappear?
Have you tried resetting your iPad?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Why is my ipad 4 suddenly going back and forth between the logo screen and lock screen and wont reset when i hold the power and home buttons down? please help, apple store is very far from my house

my ipad has never been dropped or overheated, but suddenly the screen went to the lock screen and then the logo screen and it keeps doing that. i tried resetting but its unresponsive. is this a common issue with ipad and whats wrong with it? i was checking the AccuWeather app when this happened and my battery was full if that helps. thanks

Thank You, thank You ...so much......that feature made me crazy!
Ocean20 wrote:
This can be turned off in settings/accessibility/zoom. Then on the next screen turn off

How do I stop new tabs from opening - all I want is one window that I can click back and forth on the page history

I do not want multiple windows or multiple tabs. In older Firefox versions just one window could be set, using the page history to go backwards or forwards. How do you disable new tabs or new windows from automatically opening in firefox 7?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
* http://kb.mozillazine.org/browser.link.open_newwindow (3)
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0)

HELP! How can I switch back and forth from LT to FCE to sync sound?

I'm using LT 1.2.1 and FCE 3.0. I haven't used it for 2 or 3 years, but people in this forum have been amazing at helping me get an old project working again.
Here's my latest question. I swore back then there was a way to move back and forth between LT and FCP so I wouldn't have to render my LT files each time I wanted to drop it into FCP.
Here's what I'm doing:
I've created an entire "movie" in LT that now needs to be fine-tuned to be sync'd up with a professional voiceover, which is why I'm using FCP. The only way I can figure out how to make sure the LT file is going to be sync'd with the audio is to render the movie in LT, import it into FCE, see if the audio works with it, if not, I go back to LT, move things around, then re-render, import into FCE, and hope it all sync's.
I think there was an easier way to go back and forth between the two.
Along the same lines, is there a way to get the audio from FCE (or some sort of a representation) into LT? The LT file must be adapted to the audio, and if I could "see" the audio in LT, it would be infinitely easier.
Thanks!
Bob

LiveType does not support any kind of audio, Bob.
Go through your movie in the FC Timeline and set markers at the relevant cue points by pressing M.
Pressing M a second time whilst sitting on the marker, will open a dialog where you can type a suitable description in the name field. Keep the description short -it might help to take notes too.
Export a copy of the movie (including markers) and bring it into LiveType with File > Place background Movie. The markers will show up at the top of the LT timeline, with their descriptions.
Delete the background from LiveType when you have everything lined up. Save your LT project file and import it into FCE. You can use the project file exactly like a video clip.
If you need to go back to LiveType for changes, right click the LT file in FCE's Timeline. Choose "Open in Editor". This will open the project in LT. Make changes, save the file and it will update in FCE.
Message was edited by: Nick Holmes

How do I delete email messages so that they stop "bouncing" back and forth between my devices?

How do I delete email messages so that they stop "bouncing" back and forth between my Macbook, ipad, and iphone?

Hi ST,
The first screen shot is the left (main) screen after I moved CS6 to the right screen (second screen shot). As you can see the CS6 panels are in front of MS Word. If I click in the Word document they go behind Word. If I switch over to on the right screen the panels reappear but in front of Word again. So I either have to switch back and forth between the two screens if I want to work in CS6 or manually movee the panels over to the Right Screen. It is rather awkward to have to do that. Make sense?
Left (Main Screen)
Right Screen

I use my ipod for audible books downloads. In the past I have been able to move books back and forth from library to ipod according to what I was listening to. I can no longer retreive books in the library. Any suggestions?

I use my 6th generation Ipod strictly for Audible downloads. In the past, I have been able to move titles back and forth from the Ipod and my Itunes library, to control the amount books on the ipod. Recently, an exclamation mark has appeared next to the titles as I try to transfer to the ipod, and the book does not transfer. Any suggestions on how to regain access to my purchased library?

1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now?

How can I toggle back and forth from a main pdf to its attachments?

I have a main document that I created in word and inserted hypertext to either link to 1) websites 2) a series of appendices, 3) 6 large format pdf maps or 3) a series of reference documents.
In Word, I have everything in a thumbdrive directory with the main file and three folders holding the individual files of the maps, appendices and references. All the links work but the file can't be copied to another drive without redoing all the links to the files (there are about 40 files all together).
I saved the word main document as a pdf. All the auxiliary files are also pdfs. All the weblinks came through in the pdf of the main document but the links to files need to be re-established.
1. I tried to create an acrobat portfolio with the main file and the folders of maps, references and appendices but I can't seem to make links in the main document to open up specific files in the folders.
2. I compiled all the files together into a binder and tried to use bookmarks to link the main part of the document to the first page of the 40 supporting files but at 700 pages the document is just too cumbersome to recreate the ~100 bookmarks I would need to add.
3. I tried adding everything as attachments and created links but once the link is activated from the main document and the new window opens, the main document has closed up. I need the reader to be able to toggle back and forth between the screen with the main document and the supporting documents.
What I am trying to create is one main document with links to the maps, appendices and references that will open a new window when each link is activated. Then the new window can be closed and the reader is back at the screen of the main document on the page with the link they just used.
This doesn't seem to me like it should be difficult since it almost works in Word except for the file structure.
I would really appreciate any guidance on how to make this work. The document and supporting files have already taken more than a year to put together and I'm stuck at this last step.

I think that the number of clicks to open a file is a rather shortsighted way to compare two operating systems.<<</div>
Well excuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuse ME!
I happen to think it's a pain to click twice on files when I'm used to clicking just once.
But Tiger is a nice operating system. I enjoy that it has much more capabilities than the OS9. I mean, Tiger keeps up with the advancing internet. My beef is really against OS9. I can open OS9 in Tiger but not Tiger in OS9.

Switching BW authorization concept back and forth on the fly

Similar Messages

Maybe you are looking for