Switching from external Email server to Exchange, Understanding Dis-Joint, and a little help please

I'm pretty new at installing exchange myself and have never done Exchange 2013
While going through the install help online I came across disjointed domains. I think I'm over thinking this but here is what I have and what I want to do. Any other tips would be great as well.
Customer currently has a domain, internal dns and email through GoDaddy. Lets call it smallschool.com
Internally they have a new Active Directory (2012) and the domain is in.smallschool.com. There is no external DNS except GoDaddy. I plan to use that (if that's ok).
I have built a Hyper-V for Exchange 2013 and have installed pre-requisites.
My Current Question are...
Do I need to set up dis-joint dns suffix and modify the msds-allowdnssuffix attribute? I have the instructions, I just don't know if this is a must or not with the domain names like they are.
Am I going to run into any trouble switching GoDaddy's email to Exchange Server? Any Tips?
Thank You,
fixitrod

Hi fixitrod,
Agree with Ed Crowley. If your original used domain is smallschool.com in GoDaddy, I suppose your email address would be
[email protected]
If that is the case, when you deployed a new AD domain with in.smallschool.com, we can create an accepted domain for smallschool.com in Exchange 2013. If you want to still use Godaddy for external message sending and receiving, you can create an external
relay domain. For more information about configuring external relay fomain, please refer to:
http://technet.microsoft.com/en-us/library/jj657491(v=exchg.150).aspx
Regards,
Winnie Liang
TechNet Community Support

Similar Messages

Alerts for External Email Server or Exchange Server (SMTP)

Hi Everybody,
I have configured alerts for Adapter Engine and able to see messages in Alert Inbox of RWB.
I need to configure the Alert message to an external Exchange server (SMTP).
What are the settings which need to be done to achieve this?
Also Can we link the Alert Inbox to our SAP Inbox?
Can somebody help me out on this?
Thanks & Regards,
Zabiulla

Hi Zabiulla
Follow these steps
1)Goto t-code SCOT; double-click SMTP and specify the mail-host and mail-port for the respective mail server.
2)Make the u2018Node in useu2019 check box as checked.
3)Click on the u2018Internet->Setu2019 button under u2018Supported address typesu2019 to specify the email-address of the recipient.Specify the email-address of the recipient who is going to receive the alert mails.
(OR) Specify u2018*u2019 in case of multiple email-ids.
4)Goto Menu->Settings->Default Domain and specify the domain id of the company.
Save the settings done in SCOT
.5)Specify the recipientu2019s user-id; for the particular user-id specify the email-address in the Address tab of t-code SU01.
Regards
sabyasachi

I know have a mobile me account and so my apple id is switched from my email address. i am trying to update my apps but it won't let me as it won't recognize my new 'ID'. how can i fix this on my iphone?

I have mobile me account now and so my apple id is switched from my email address to my mobile me address. Since I have made this change I can't update my apps. Everytime I try to sign in it won't recognize the switch. I have updated all the proper information on my iphone, however, when updating apps it still shows my apple id as my email address and not the mobile me account address. I am not sure what else to do??? I have even sync'd my iphone and tried to do it through my pc, however, it says that it can't update (nothing to update). I have ten updates sitting on my iphone apps...What to do...what to do? Very confused.

Where are you trying to log in? You should be able to change your ID at http://appleid.apple.com - can you log in there?
Before you change your ID you should log out of the iTunes Store and on any devices which are logged into iCloud. Then once you've changed it you can log back in with the new ID. (Your iCloud synced data will disappear from the device when you do this but will reappear when you sign back in - give it time).
If you are unable to sign into http://appleid.apple.com you will need to contact Support. Go to http://iforgot.apple.com and sign in with your iCloud login. A new password will be sent to your associated email address. If this doesn't work you will have to contact Support. Go to https://getsupport.apple.com . Click' See all products and services', then 'More Products and Services, then 'Apple ID', then 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password'. If you have any problems with that try this form: https://www.apple.com/emea/support/itunes/contact.html

HT201320 How can I switch from one email user to another?

How can I switch from one email account to another?

You have to select between the two accounts in the mail app.
Say for instance that you are reading an email in your XYZ email account. Tap the button in the upper left corner of the mail app to back out all the way to where you can see all of the email accounts.... Tap InBox, then tap XYZ email Account and that will take you back to the main MailBoxes window.
Is that what you want to know? There is no way to simply "toggle" between the two accounts.

Is there a way to import contacts from an email server to an iphone?

Is there a way to import contacts from an email server to an iphone?

not that I'm aware of.

Attach doc from external content server- using Generic Object Service (GOS)

Dear All,
i have intergrated an external content server to SAP using SAP archive link. All the scanned document are there in Content server and corresponding entries are done in SAP.I can search and view document using tcode : OAAD
Please tell me steps for "how to attach a document from external content server using Generic Object Service "
Scenario is : For example when we change any Master records or create a new PO, or do some financial transaction then i need to attach the supporting document which is there in my content server connected to SAP.how do we manual attach a Document in SAP using GOS.
Do we need to do some special configuration to use GOS .please give the steps from initial.
Thanks
sandeep

Hello,
Check your configuration of document type assignement to required business document - object type, Archivelink table, content repository in OAC3 transaction.
Goto respective business document > Click on GOS > Create > Store business document - Here you can see defined document type with desctiption. Double click on this the assign your document to this business document. Save it.
This will help in attaching the document to your required business document.
To verify you can check the archivelink table or by transaction OAAD.
Hope this will help you.
-Thanks,
Ajay

SPAM from our email server

I received an email from [email protected]
Subject: Email Feedback Report for IP (our email server's IP address)
This is an email abuse report for an email message with the message-id of F07FB3A7-2B7C-4DD7-BD3B-D976E24D398D@(ourdomain).com received from IP address (our email server's IP address) on Wed, 26 Oct 2011 12:03:22 -0400 (EDT)
So it looks like SPAM was sent from our email server from the email address above (F07FB3A7-etc...). I searched log files but I can't locate anything with that address. There are no accounts with that name on the server. Is it possible that someone created that account, sent out SPAM, then deleted the account? I'm puzzled.

Post the unexpurgated contents of the postconf -n command, and we'll have a look at the usual suspects.
We'll also want a look at the headers from the feedback message, as well as the reported spam. This to see whether the feedback message looks legitimate, and what the reported spam message contained.
And search for the time of the message in the logs; that long hexadecimal string is in the format of a GUID/UUID valud, and not a user. Which might mean it's tied to a message, or to a user. (The message headers can show more about this.)
(For the GUIDs associated with users, look around for a user in your Open Directory or your local database with a matching value. This can be visible via Workgroup manager inspector, or via the GeneratedUID value that Directory Utility can display for the user. For the messages, dig around in the SMTP server logs.)

I have received a spamming complaint from my email server - help?

I have received a spamming complaint from my email server that I was not aware was happening. They want me to clean my computer, what do I do first?

There are a few trojan horse programs that can infect a Mac, but none found in the wild send out spam messages, so those aren't a concern for your current situation, and if you stay current with your updates to Mac OS X, Apple's blocked most of those trojans that do exist (there's a new update just today, I believe, for one discovered recently). Overall I don't see much need for antivirus utilities as long as you exercise common sense and caution in what you download from the web. Those trojans all depend on unsuspecting users downloading fake software from unsecure sites. Download only from sites you can trust - the software developer for applications - and don't open attachments you aren't expecting - and you should be fine. If you do feel the need for some sort of scanning, the freeware ClamXav should be sufficient.
Regards.

How do I configure my iPhone to show different colours for my two calendars both from separate email accounts, both Exchange.

How do I configure my iPhone to show different colours for my two calendars both from separate email accounts, both Exchange.

It does so by default... what's the issue?

Search highlights from external highlight server

In Acrobat Reader 9, under Edit > Preferences > Search, the "Enable search highlights from external highlight server" option is by default set to false. For those of us who use third party search engines to search PDF files on the web, this is a disaster. The only way to enable hit highlighting in this situation is to have users change their settings manually, which is a lot to ask of people who are not tech savvy.
Does anyone know of a solution to this problem? Would Adobe change the default settings to true in future versions? Is there some kind of workaround?
Thanks,
Simon

Why did Adobe change the defaut? I am installing dtSearch and it works great in Adobe 8 and below. But Adobe changed version 9 changed and so now the hits do not show and the "Jump to next Hits" and "Jump to previous Hits" does not show on the Adobe toolbar.
My problem is that this makes dtSearch look bad - like their search page is no good.
If I create web pages using dtSearch, the users will not know enough to set the Enable search highlights from external highlight server.
Even if I put a big note on the web page, I know that people will not read it and they will think that the web page is buggy.
I sure wish Adobe would put this back and make Enable search highlights from external highlight server the default.

Little help please with forwarding traffic to proxy server!

hi all, little help please with this error message
i got this when i ran my code and requested only the home page of the google at my client side !!
GET / HTTP/1.1
Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
Accept-Language: en-us
UA-CPU: x86
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.2; .NET CLR 2.0.50727)
Host: www.google.com
Connection: Keep-Alive
Cookie: PREF=ID=a21457942a93fc67:TB=2:TM=1212883502:LM=1213187620:GM=1:S=H1BYeDQt9622ONKF
HTTP/1.0 200 OK
Cache-Control: private, max-age=0
Date: Fri, 20 Jun 2008 22:43:15 GMT
Expires: -1
Content-Type: text/html; charset=UTF-8
Content-Encoding: gzip
Server: gws
Content-Length: 2649
X-Cache: MISS from linux-e6p8
X-Cache-Lookup: MISS from linux-e6p8:3128
Via: 1.0
Connection: keep-alive
GET /8SE/11?MI=32d919696b43409cb90ec369fe7aab75&LV=3.1.0.146&AG=T14050&IS=0000&TE=1&TV=tmen-us%7Cts20080620224324%7Crf0%7Csq38%7Cwi133526%7Ceuhttp%3A%2F%2Fwww.google.com%2F HTTP/1.1
User-Agent: MSN_SL/3.1 Microsoft-Windows/5.1
Host: g.ceipmsn.com
HTTP/1.0 403 Forbidden
Server: squid/2.6.STABLE5
Date: Sat, 21 Jun 2008 01:46:26 GMT
Content-Type: text/html
Content-Length: 1066
Expires: Sat, 21 Jun 2008 01:46:26 GMT
X-Squid-Error: ERR_ACCESS_DENIED 0
X-Cache: MISS from linux-e6p8
X-Cache-Lookup: NONE from linux-e6p8:3128
Via: 1.0
Connection: close
java.net.SocketException: Broken pipe // this is the error message
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:115)
at java.io.DataOutputStream.writeBytes(DataOutputStream.java:259)
at SimpleHttpHandler.run(Test77.java:61)
at java.lang.Thread.run(Thread.java:595)
at Test77.main(Test77.java:13)

please could just tell me what is wrong with my code ! this is the last idea in my G.p and am havin difficulties with that cuz this is the first time dealin with java :( the purpose of my code to forward the http traffic from client to Squid server ( proxy server ) then forward the response from squid server to the clients !
thanx a lot,
this is my code :
import java.io.*;
import java.net.*;
public class Test7 {
public static void main(String[] args) {
try {
ServerSocket serverSocket = new ServerSocket(1416);
while(true){
System.out.println("Waiting for request");
Socket socket = serverSocket.accept();
new Thread(new SimpleHttpHandler(socket)).run();
socket.close();
catch (Exception e) {
e.printStackTrace();
class SimpleHttpHandler implements Runnable{
private final static String CLRF = "\r\n";
private Socket client;
private DataOutputStream writer;
private DataOutputStream writer2;
private BufferedReader reader;
private BufferedReader reader2;
public SimpleHttpHandler(Socket client){
this.client = client;
public void run(){
try{
this.reader = new BufferedReader(
new InputStreamReader(
this.client.getInputStream()
InetAddress ipp=InetAddress.getByName("192.168.6.29"); \\ my squid server
System.out.println(ipp);
StringBuffer buffer = new StringBuffer();
Socket ss=new Socket(ipp,3128);
this.writer= new DataOutputStream(ss.getOutputStream());
writer.writeBytes(this.read());
this.reader2 = new BufferedReader(
new InputStreamReader(
ss.getInputStream()
this.writer2= new DataOutputStream(this.client.getOutputStream());
writer2.writeBytes(this.read2());
this.writer2.close();
this.writer.close();
this.reader.close();
this.reader2.close();
this.client.close();
catch(Exception e){
e.printStackTrace();
private String read() throws IOException{
String in = "";
StringBuffer buffer = new StringBuffer();
while(!(in = this.reader.readLine()).trim().equals("")){
buffer.append(in + "\n");
buffer.append(in + "\n");
System.out.println(buffer.toString());
return buffer.toString();
private String read2() throws IOException{
String in = "";
StringBuffer buffer = new StringBuffer();
while(!(in = this.reader2.readLine()).trim().equals("")){
buffer.append(in + "\n");
System.out.println(buffer.toString());
return buffer.toString();
Edited by: Tareq85 on Jun 20, 2008 5:22 PM

HT1338 I can see my photos in iphoto but can't email them, edit them or print them....help please!

I can see my photos in iphoto but can't email them, edit them or print them....help please!

First, what is the formatting of the external hard drive? It should be OS X Extended (journaled). You can determine it by selecting the EHD and typing Command + i.
Click to view full size
If it isn't formatted to that you should move the library off of it and reformat.
The "!" is an indication that the file path to the original file has been broken So make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

£37 has disappeared from my iTunes account. But no apps or music or tv/movies have been bought. Has it been hacked and can you help please?

£37 has disappeared from my iTunes account. But no apps or music or tv/movies have been bought. Has it been hacked and can you help please?

Report it to Apple:
How to report an issue with your iTunes Store purchase - http://support.apple.com/kb/HT1933 - working through iTunes application and iTunes Store interface.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html
Change the password on your account.

How many DNS record need to create in Internal & external DNS server for exchange?

Hi friends,
I recently installed Exchange Server 2010 in my organization for testing purpose and I've register a pubic ip too for exchange server on godaddy.com. How many
internal & External DNS records reqired to configure on external & Internal dns server so my all feature like Auto-discover, Activ -sync,& webmail start working perfectly.
It's my first time configuring exchange for a organization.
Thanks & Regards,
Pradeep Chaugule

Hi,
Just as what ManU Philip said, you need to create
Autodiscovery.domaincom and mail.domain.com for external dns server.
Generally, you configure your Exchange Servers as DNS clients of your internal DNS server.
Refer from:
http://technet.microsoft.com/en-us/library/aa996996(v=exchg.65).aspx
Best Regards.

I changed email servers but mail is attempting to be sent from deleted email server

We have a new email server so I deleted the email account associated with the old server and then added a new server. When I try to send an email, it is finding the old SMTP server and attempts to send using that (which of course fails since I no longer have an account there. I can't find any vestage or reference to my old email server anywhere on my iPhone but it is still finding it. Help, please?

Hi Nick,
From your description, I would like to clarify the following thing:
A user with Full Access permission can’t send email from the shared mailbox unless they also have Send As or Send on Behalf permission. Please grant your IT mailbox send as permission or send on behalf permission to check the result.
For your reference:
Shared mailboxes in Exchange Online
https://technet.microsoft.com/en-us/library/jj966275%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
Hope this can be helpful to you.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Amy Wang
TechNet Community Support

Switching from external Email server to Exchange, Understanding Dis-Joint, and a little help please

Similar Messages

Maybe you are looking for