Switching from PC to Mac - need urgent help!

This question has been asked before, more or less, but I'm going to ask it again, because my version is more - me specific.
Upgrading from PC (windows) to Mac (...). I have CS5.0 (photoshop, illustrator, indesign, acrobat, bridge) Student and Teacher edition for windows.
As far as I can tell, it is not possible to simply switch my PC license to a Mac license - even when I DON'T want to be using CS5 on both the PC and Mac. Meaning, I ONLY will be using CS5 on the Mac.
Is this correct?
Presuming the above statement is correct, how much is an upgrade from CS5 Windows to CS.5 Mac? How much of a hassle is it?
And, how different is CS5.5 from CS5.0, as in, features and "looks" wise? Is it fully compatable with the intuos4? And will PhotoshopCafe tutorials for CS5 still be relevant?
One last question. Is running Photoshop through Parallels 7 a pliable option? From the research I've done, it doesn't sound like it (ie. lag and no full access to full RAM power), but I would appreciate verification from personal experience.
Thank you in advance, and I apologise for the mass of questions.

Then really for me upgrading would be a waste of money. I really only use PS and AI, and Bridge obviously. And from what I read about what they upgraded, it would be a waste for me. I'm not commercial yet! lol
Thank you very much for your help. I think now I will continue looking deeper into running CS5 via Parallels. My only concern is that it apparently runs slower (which makes sense). However I read somewhere that setting up the VM on a seperate partition on the HDD helps? Or even running Bootcamp through the VM.
Do you know anything about this? I've set up seperate drive partitions on Windows before, so that is not a concern to me.

Similar Messages

Elements 11: switched from Windows to Mac need help w/ serial

My friend upgraded, and no longer uses her Elements 11. She wants to give it to me. However she uses Windows, and I have a Mac. After I downloaded the program and it prompted me to enter the Serial Number, it says "This serial number is not valid for this product" - after some google research I believe it is because the serial number for Windows isn't compatible for Mac.
My question is, is it possible to find the serial number on this product that's compatible for Mac (like, do these products come with two different serial numbers; one for Windows and one for Macs)? Or is it just not going to work on a Mac at all? Any advice would be appreciated! Thanks in advance.

mrjayd, I switched from a PC to a G5 about 6 weeks ago & had the same problem. I used iPodRip which you can find at versiontracker.com. It worked like a charm, recovered playlists, playcounts, everything. Good Luck!

Switched from Win to Mac, need CS4

New here, I appreciate any help!! I have just switched from a windows machine to Mac. On the windows machine I had an education version of CS4 Design Premium. Now I need it to work with Mac OSX Lion 10.7.3. I downloaded the mac version of the software, but the installer would not take my old windows serial number. What can I do??
I sincerely appreciate any help you are able to give. I am working on a project, and I don't want to have to rebuy CS4 again!! Thanks!

You upgrade to CS5.5 and make the platform switch. If you're still eligible for education pricing, you just buy anew. Until then you can always run your Windows version via Bootcamp or Parallels.
Mylenium

Switching from MobileMe to iCloud - Need some HELP

I switched from my MobileMe account to iCloud, but I cannot delete my old MobileMe account. Every time I try to go to https://me.com/MOVE (as suggested by Apple), the site automatically re-directs me to https://me.com/FIND, and then tells me to go to iCloud to find my iPhone. I couldn't care less about finding my iPhone: I just want to delete my (at this point useless) MobileMe account.
Any ideas?

I am in EXACTLY the same boat.
Double points to the correct answer!
Good luck Chris.

Quality of imported movies is very poor: SWITCHER FROM PC TO MAC NEEDS HELP

I find the quality of the video images imported from my JVC gz-mg575e to be very poor. If I play my movies directly of camera on TV I have a crystal clear image. After importing the movie in IMovie 08 the quality gets worse.
I already selected the ultrafine mode for the camera.
Is there something wrong with my setting of iMovie?
Or is it because I use iMovie08 instead of Final Cut Pro?

This is a PAL camcorder I think. Are you are selecting PAL as your setting when you import into iMovie?

Switching from pc to mac: itunes library help

I recently witched from a clunky old pc to a beautiful new aluminum imac. I imported my itunes library a week ago, and i has been seamless. But today i realize im missing the games in my library. I tried dragging the files to the library, importing it, etc... but it doesnt work. What do I do? I dont want to buy them again.

I used an external HD. I simply copied the entire itunes folder and dragged it into the mac's music folder. Everything, including playlists, ratings, etc. are there. the games files are there too, just not in the itunes library. I drag/import/ into itunes, it doesn't work.

Switching from PC to Mac - Need to ask several compatibility questions

Hello. I'm about to buy a new iMac, with the whole hunky dory '^_^, especially graphics. The thing is, I don't really care about Windows-only software as I can buy VMware or similar, but my question is, I have a complete collection of The Sims 2 (and The Sims 1, from some time ago.), intended for Windows. As I know trans-machine applications via virtual machine software can be VERY buggy, especially when using high-end graphics. Will I have to keep my old big PC to run it properly, or will I be able to run The Sims 2 and similar graphics-using games on a new iMac with virtual machine software?
And don't suggest me to re-buy it Mac-edition, hehe. Still saving for the iMac itself! '^_^. (I'm a teen from Israel, what did ya expect? )
-Smiles.

How fast Windows runs in a virtual machine depends primarily on the system power. If you want to use a VM exclusively for games sans Boot Camp you should go for as much processing power and memory as you can afford. I have Windows Vista installed in Boot Camp and I also have a Parallels virtual machine set up to run the Boot Camp installation from within OS X. Parallels doesn't currently support Direct X in Vista, however, but it does in Windows XP. Parallels also has a migration tool that will allow you to migrate an existing Windows installation from a PC into a Parallels virtual machine on a Mac.

Switching from PC...need iphone help

hey im about to get my macbook pro in for graduation and was wondering what all i needed to do to keep all my iphone settings and contacts that i currently have when i switch over...im currently on a PC running windows XP.
note that i entered all my contacts manually and dont have a mail account on my server that they back up to that i am aware of. I honestly have never messed with that tab and just need some advice here! thanks!

Perhaps this topic would be better suited for the iPhone Mail, Contacts and Calendar forum?
-Doug

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.

I am writing to this forum to ask for help in determining whether Aperture will satisfy my needs when I switch from Windows to MAC in the near future.
I am currently using Photoshop Elements 8 on Windows 7. After several years of use, I am self taught and adequately proficient for an amateur. What I didn't realize (until I started researching my upcoming migration on the Internet) is that I actually use PE8 for two functions: digital asset management and digital editing.
Regarding Digital Asset Management: My research leads me to understand that PE on MAC does not provide the same level of organizational capability that I am used to having on Windows, instead providing Adobe's Bridge which does not look very robust. Furthermore, iPhoto, which come on MAC will not support the hierarchical keyword tagging that I require to organize my library of photos. The two SW applications which I am thinking of switching to are either Aperture or Adobe's Lightroom. Frankly, I'm thinking that it would be smoother to stay within the Apple product line.
So the remaining question is whether Aperture will support my digital editing needs. The tweaks that I do to my photos are not very complex (no, I do not want to put people's heads on other animal bodies). But could someone who uses Aperture tell me whether It will allow me to do the following kinds of edits?:
- If I have a photo where someone's face is too shadowed, can I lighten just that person's face, and leave the rest of the photo as-is?
- if I have a photo where the background is cluttered (eg, 2 people in front of the Parthenon which is undergoing renovation), can I remove just the construction cranes?
- Can it splice together several separate photos to give a panoramic?
If, once I get Aperture, I find that it cannot enable the kinds of editing that I do, I would probably get PE11 in the future. However, if people in this forum tell me that Aperture will definitely not support the kinds of editing which I've described in the previous paragraph, I would prefer to get PE11 with my initial configuration (since someone will be helping me with my migration).
Thanks in advance for your consideration and help!

I am concerned, however, about using a non-Apple Digital Asset Manager in OSX. I would really like to avoid integration problems. Is using PE11 to import and catalog my digital photos likely to cause conflicts?
Thanks for any insight on this
Amy,
Not so much conflicts as maybe a little less seamless integration with Apple software and perhaps some third-party software providers in the Mac App Store where some programs build in direct access to iPhoto and Aperture libraries for getting images into those programs easily. Typically, there is a manual command to go to Finder (think Windows Explorer) to browse folders.
One caution to mention however, is that the organization you set-up in PE Organizer is unlikely to transfer over to either iPhoto or Aperture if you decide to change at some point.
The only real stumbling block that I see in your opening comment is that you want hierarchical keywording (Kirby or Léonie can go into the details on keywording limitations as I stay at one level). If you can work with the keywording schemes of either iPhoto or Aperture, then using PE for your external editor (either program supports setting an external editor) would probably be ideal since you know PE well. This is the idea with the Mac App Store version of PE (editor with no organizer).
Note - I use Photoshop CS6 (full version) with Aperture and it works really well. The only downside is that Aperture has to make either a TIFF or PSD file to send to an external editor so that the original file is protected by not sending it to the pixel editor. While TIFF or PSD files protect the integrity of the image information without degrading it, they are typically much larger file sizes on disk than either RAW or JPEG files. Therefore, your library size (iPhoto or Aperture) will balloon quite a bit if you send a lot of files to external editors.
One other possibility for an external editor would be a program called Pixelmator. It is pretty similar to early versions of Photoshop, but built for Mac. Other than the panoramics you want, it will do most pixel editing that PE can do. It is not an organizer, so it is built to go with either iPhoto or Aperture. It does have differences in how you complete certain procedures, so there is bit of a learning curve when you are used to doing it the Adobe way.

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

Switching from Windows to Mac. Is it worth it? Please help!

Hey everybody,
I think I finally made my decision to switch from windows to Mac,..the I-book. G4 (not the power book). The I-book I want is around 1299.00, with the wider screen,..than the smaller i-book.
Anyhow,.what led me to this decision was just sending back the Sony FS series. It was sleek beautiful and"white" like I love,..but the speakers were awful. I have just about given up on trying to find a decent notebook. I love the look of the i-book,..but cant get that gorgeous wide screen from Sony out of my mind. It was more than the speakers. Just too noisy. Anyway...if you bought this i-book all over again,..would you? Alos I have a brand new Linskys Router with the built in Security. Would the Macs intergrated wireless card,..work with my router?
Please help!
Lil
planning on getting this notebook. Need advice

I'm afraid you're not exactly going to get an unbiased opinion here
As a long-time Mac fan (back since System 6) who was forced into a PC world man years ago, OSX has re-kindled my passion for computing. I'm an old Unix guy and OSX has combined the best PC operating system with the power of Unix. To the average user who doesn't care about shell scripts and porting free applications, what you'll get from Unix is a tremendous amount of reliability and security...
One of the best reasons for anyone to switch to the Mac was summed up in a post over on iLounge as a reply to someone who was switching. When asked why anyone would switch, one reply simply said, "...because he realises that a computer should be a productivity tool, not a virus scanner."
In the year since I've bought my Mac Mini, the only failure I've had has been a crash of Virtual PC (an emulator that will allow you to run your old Windows-based applications), which took the virtual disk out and forced me to reinstall my Windows environment. That's nothing different than I've experienced countless times on my old PC.
That said, I'm looking at a 12" iBook. I didn't even consider the 14" because I don't want something larger that doesn't give me extra screen real-estate. I debated the 15" Powerbook but decided I don't really need it's larger screen, and I'd rather have something more portable. There are companies out there that sell dual-layer DVD-RW drives that can be installed in an iBook (even the 12" Powerbook only ships with a single-layer DVD burner).
512mb should be plenty, unless you plan on editing video or running Virtual PC--in which case, I'd recommend at least a gig.
Mini Mac OS X (10.4.3) 12" iBook + 2.3ghz Powermac on the way! Former Newton OMP user.

Need Urgent help, I have made partition hard drive in my mac book and using OS mac

Need Urgent help, I have made partition hard drive in my mac book and using OS mac & Window8 seperately... for couple of days it works great for both window & OS mac But nowadays, my pc gets restart automatically while using window & even I cant access to my Mac OS........... I got some error in window (error80070003) ...>>>>> Now how can I format whole drive & recover my Mac book OS.without boot disk.

I can't find that model. If you open System Profiler in the Utilities folder look for the Model Identifier over in the right hand display. What do you find for the model ID? If your computer supports Internet Recovery here's what to do:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. If Mavericks is not installed, then you can reinstall it by re-downloading the Mavericks installer.
You will need to use Boot Camp Assistant in order to create a new Windows partition, then reinstall Windows.

I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????

Do you have a Time Machine backup or clone? If not,
all is lost if you have in fact deleted your OSX partition
and you will have to do a reinstall from Recovery HD
and install all else.

I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new compute

I have CC for work and my PC to do work at home. At home I switched from PC to Mac this weekend. I want to redownload my apps for the iMac but it's telling my I'm using a 30 day free trial. I need to discontinue the PC apps and download to the new computer.

YOu need to sign out of the PC thru the CC manager and then sign in on the Mac.

I need urgent help to remove unwanted adware from my iMac. Help!

I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Switching from PC to Mac - need urgent help!

Similar Messages

Maybe you are looking for