Switching network printers for HP Solution Center

I have two network printers (HP Officejet Pro 8500 All-in-one) installed in my office. When I downloaded the latest version of HP Solution Center for Window 7, the Solution Center connected to the secondary network printer in my office, not the printer I use. Any suggestions on how to switch the printer that HP Solution Center connects to? Thanks.

I would try 2 things here...
1. Make sure that the printer you want to install the new sortware for is set as the default printer.
2. Reinstall the software with the secondary printer turned off.
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

Similar Messages

Software for HP solutions center is not compatable with windows 7

I bought a HP note book pc with windows 7 64 bit operating system. I'm using a HP officejet 4315v all in one printer that works perfectly using the driver detected by windows 7 installed using the USB cable. Previously I had installation software for the HP solution center program that worked with XP and Vista. When I tried to install the software in windows 7 I received the message telling me it was incompatable with my operating system. There seems to be according all my research in the HP system no updated software to use Window solutiions center with Windows 7 64 bit operating system. HP says there is a work around that will open the toolbox in order to check ink levels but not much more. It doesn't work. I know microsoft 7 provides a way to scan and fax but HP solution center was by far better. Are there any solutions I might have misses or suggestion? I would appreciate any help given. TIA

The only solution for the officejet 4315v is the in-OS driver in WIndows 7, there is no full feature software availible for this printer in that OS.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Cannot install HP Photosmart Solution Center for C410a All-In-One

Computer: Dell Inspiron 15R
O/S: Windows 8.1, 64-bit
Printer: HP Photosmart Premium Fax e-All-in-One Printer C410a
This computer had a version of the HP Solution Center successfully installed in the past, but we started having problems with the computer to the point where we lost all the Microsoft Office suite. After repairing/reinstalling that, I repaired all the other Programs in the Control Panel Unstall page. However, I decided to uninstall all HP software using the Control Panel Unstall Program. I rebooted the computer and attempted to reinstall the HP Solution Center by downloading the latest software from the HP website. The software will not reinstall.
When the installer screen appears, it has 3 buttons: Install, Readme, Exit.
When I hit "Install", a popup window indicates "The system cannot find the file specified."
So, I cancel out of it and hit "Readme". A different popup window appears indicates:
Windows cannot find
'C\Users\Karen\AppData\Local\Temp\7zS3838\setup\Readme\autorun.infla...\Readme.hml'
Make sure you typed the name correctly, and then try again.
I hit "Exit" and the installation window closes.
The "\Readme\autorun.infla...\Readme.hml" message bothered me so I looked into the 7zS3838 directory. There I found the Autorun setup information file. Under the "[LaunchPad.Main.Btn2]" section is a line:
TargetPath=.\setup\Readme\%lang%\Readme.html. It seems to me the "%lang%" parameter is messed up somehow being set to some version of "autorun.infla". If "%lang%" is corupted, it seems likely that other parameters are corrupted as well indicated by the error message produced when hitting "Install".
I have tried running the Unstall_L4.bat. It seems to fail on a particular section, but then presses on to completion.
I have run a Disc Cleanup and rebooted the computer several time as well as tried this installation several times but to no avail.
I have tried installing using the PS_AIO_07_C410_140_408.exe software and it produces the same results as the Solution Center.
I even tried the original installation disc, but, when the installation screen appeared, there were no "Install" nor "Readme" buttons (only and "Exit" button).
I have looked at the log files for the Solution Center installation. It produced 12 log files: HPSLPSVC0000 - HPSLPSVC0010 and HPPIWLog. None of the HPSLPSVC log files show any errors. But, the HPPIWLog does. I'll post the as much log as I can at the end of this post. However, 2 failures stand out.
The first is:
( 3-21-2014 22:38:38:347 ):MsiEnumRelatedProducts Failed with Upgrade code : {CC6EF10F-6CFE-4660-85B4-4CED9EEC7B5B}
The second is:
( 3-21-2014 22:55:30:96 ):Error.!!Device's TYPE is NOT SUPPORTED
Well, other that the 2 errors from the log file, please let me know if you have any ideas on how the "%lang%" parameter could have been corrupted. I'm willing to dig into the registry if I have to.
Thanks in advance!
Ted
Here's the HPPIWLog:
( 3-21-2014 22:34:17:665 ):-------------- APPLICATION STARTUP --------------------
( 3-21-2014 22:34:17:665 ):Version :3.1.0.19
( 3-21-2014 22:34:17:665 )perating System : (64 Bit)
( 3-21-2014 22:34:17:665 ):-------------------------------------------------------
( 3-21-2014 22:34:18:134 )howing Invitation Screen..
( 3-21-2014 22:34:18:134 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:18:134 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:34:18:134 )et Aboutbox string..
( 3-21-2014 22:34:18:196 ):Window is set as foreground
( 3-21-2014 22:34:18:196 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:22:306 )howing Preparing Dialog..
( 3-21-2014 22:34:22:306 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:22:306 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:34:22:306 )et Aboutbox string..
( 3-21-2014 22:34:22:306 ):Window is set as foreground
( 3-21-2014 22:34:22:306 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:22:697 ):Inside CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:34:22:697 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:34:22:697 ):Call CoCreateInstance
( 3-21-2014 22:36:22:818 ):call ReregisterSLPService
( 3-21-2014 22:36:23:5 )evice Manager Enumeration - USB and Network devices
( 3-21-2014 22:36:23:21 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:23:21 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:36:23:21 )et Aboutbox string..
( 3-21-2014 22:36:23:36 ):Window is set as foreground
( 3-21-2014 22:36:23:36 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:33:538 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:33:538 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:36:33:538 )et Aboutbox string..
( 3-21-2014 22:36:33:538 ):Window is set as foreground
( 3-21-2014 22:36:33:538 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:34:70 ):Thread Started..
( 3-21-2014 22:36:34:70 ):Enumerating Modelnumber of USB Devices.
( 3-21-2014 22:36:34:85 )LP Enumeartion.
( 3-21-2014 22:36:34:85 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:34:85 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:36:34:85 )et Aboutbox string..
( 3-21-2014 22:36:34:85 ):Window is set as foreground
( 3-21-2014 22:36:34:101 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:38:34:206 ):WMI Enumeartion.
( 3-21-2014 22:38:35:472 )evice Manager Enumeration - Karnak enumeration
( 3-21-2014 22:38:35:472 ):Get Modelnumber of Network Karnak Device..
( 3-21-2014 22:38:36:831 ):Inside IsKarnakDevice Method
( 3-21-2014 22:38:36:831 )evice : HP Photosmart Prem C410 series
ModelNumber : CQ521A
( 3-21-2014 22:38:36:831 ):Webserer Request URL : http://h20614.www2.hp.com/ediags/solutions/software?client=PIW&FriendlyName=HP Photosmart Prem C410 series&OS=Windows NT 6.2
( 3-21-2014 22:38:38:347 ):Inside CheckForSoftware Method..
( 3-21-2014 22:38:38:347 ):MsiEnumRelatedProducts Failed with Upgrade code : {CC6EF10F-6CFE-4660-85B4-4CED9EEC7B5B}
( 3-21-2014 22:38:38:347 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:38:38:347 ):Call CoCreateInstance
( 3-21-2014 22:40:38:425 ):call ReregisterSLPService
( 3-21-2014 22:40:38:487 ):Network Device : HP Photosmart Prem C410 series
( 3-21-2014 22:40:38:487 ):ModelNumber : CQ521A
( 3-21-2014 22:40:38:487 ):Requet Send to Terminate Thread .!!
( 3-21-2014 22:40:38:487 ):Thread Terminated.!!
( 3-21-2014 22:40:38:487 ):Returns from CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:40:38:487 ):Number of Devices Enumerated : 0
( 3-21-2014 22:40:38:487 ):No devices Connected/Installed
( 3-21-2014 22:40:38:487 ):Current Screen Id : 3
( 3-21-2014 22:40:38:503 )howing USB Connection Dialog..
( 3-21-2014 22:40:38:503 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:38:503 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:40:38:503 )et Aboutbox string..
( 3-21-2014 22:40:38:519 ):Window is set as foreground
( 3-21-2014 22:40:38:519 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:38:519 ):Inside CUsbConnectionDlg : OnInitDialog()
( 3-21-2014 22:40:38:519 ):Returns from CUsbConnectionDlg : OnInitDialog()
( 3-21-2014 22:40:53:544 ):currentScreenId = ScreenIdNetworkDeviceSelect (2P)
( 3-21-2014 22:40:53:544 )howing Network Device Dialog..
( 3-21-2014 22:40:53:560 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:53:576 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:40:53:576 )et Aboutbox string..
( 3-21-2014 22:40:53:576 ):Window is set as foreground
( 3-21-2014 22:40:53:576 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:53:591 ):Inside NetWorkDialog : OnInitDialog()
( 3-21-2014 22:40:53:591 ):Calling NetWorkDialog : EnumerateNetworkDevices()
( 3-21-2014 22:40:53:591 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:40:53:591 ):Call CoCreateInstance
( 3-21-2014 22:42:53:653 ):call ReregisterSLPService
( 3-21-2014 22:44:53:823 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:44:53:823 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:44:53:823 )et Aboutbox string..
( 3-21-2014 22:44:53:823 ):Window is set as foreground
( 3-21-2014 22:44:53:839 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:45:3:872 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:45:3:872 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:45:3:872 )et Aboutbox string..
( 3-21-2014 22:45:3:888 ):Window is set as foreground
( 3-21-2014 22:45:3:888 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:45:4:232 ):Calling sparkBL.GetLatestSoftwareAvailabilityMatrix From Network dialog
( 3-21-2014 22:45:4:232 ):Inside GetLatestSoftwareAvailabilityMatrix Method
( 3-21-2014 22:45:4:232 ):Inside CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:45:4:232 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:45:4:232 ):Call CoCreateInstance
( 3-21-2014 22:47:4:304 ):call ReregisterSLPService
( 3-21-2014 22:47:4:350 )LP Enumeartion.
( 3-21-2014 22:49:4:457 ):WMI Enumeartion.
( 3-21-2014 22:49:4:723 )evice Manager Enumeration - Karnak enumeration
( 3-21-2014 22:49:4:723 ):Returns from CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:49:4:723 )et LatestSoftwareAvailabilityMatrix as devMap = m_DeviceSoftwareAvailabilityMatrix
( 3-21-2014 22:49:4:723 ):Returns from sparkBL.GetLatestSoftwareAvailabilityMatrix
( 3-21-2014 22:49:4:738 ):Returns from NetWorkDialog : EnumerateNetworkDevices()
( 3-21-2014 22:49:18:6 ):currentScreenId = ScreenIdNetworkDeviceSelect
( 3-21-2014 22:49:18:6 )et Re-enumeration Flag : True.
call GetDeviceSelectionScreenId
( 3-21-2014 22:49:18:6 ):Inside CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:49:18:6 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:49:18:6 ):Call CoCreateInstance
( 3-21-2014 22:51:18:57 ):call ReregisterSLPService
( 3-21-2014 22:51:18:167 )evice Manager Enumeration - USB and Network devices
( 3-21-2014 22:51:18:182 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:18:182 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:51:18:182 )et Aboutbox string..
( 3-21-2014 22:51:18:198 ):Window is set as foreground
( 3-21-2014 22:51:18:198 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:247 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:262 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:51:28:262 )et Aboutbox string..
( 3-21-2014 22:51:28:278 ):Window is set as foreground
( 3-21-2014 22:51:28:278 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:590 ):Thread Started..
( 3-21-2014 22:51:28:590 ):Enumerating Modelnumber of USB Devices.
( 3-21-2014 22:51:28:590 )LP Enumeartion.
( 3-21-2014 22:51:28:606 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:606 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:51:28:606 )et Aboutbox string..
( 3-21-2014 22:51:28:622 ):Window is set as foreground
( 3-21-2014 22:51:28:622 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:53:28:710 ):WMI Enumeartion.
( 3-21-2014 22:53:28:961 )evice Manager Enumeration - Karnak enumeration
( 3-21-2014 22:53:28:976 ):Get Modelnumber of Network Karnak Device..
( 3-21-2014 22:53:29:148 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:53:29:148 ):Call CoCreateInstance
( 3-21-2014 22:55:29:206 ):call ReregisterSLPService
( 3-21-2014 22:55:29:252 ):Network Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:29:252 ):ModelNumber : CQ521A
( 3-21-2014 22:55:29:252 ):Get Modelnumber of Network SLP Device..
( 3-21-2014 22:55:29:424 ):Network Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:29:424 ):ModelNumber : CQ521A
( 3-21-2014 22:55:29:424 )evice Details..
Name : HP Photosmart Prem C410 series
PID : 0000
ModelNumber : CQ521A
( 3-21-2014 22:55:29:424 ):Request send by PID
( 3-21-2014 22:55:29:440 ):Webserer Request URL : http://h20614.www2.hp.com/ediags/solutions/software?client=PIW&Pid=0x0000&OS=Windows NT 6.2
( 3-21-2014 22:55:30:96 ):Error.!!Device's TYPE is NOT SUPPORTED
( 3-21-2014 22:55:30:96 ):Failed to Parse Json Object.
( 3-21-2014 22:55:30:96 ):Failed to read webserver data using PID
( 3-21-2014 22:55:30:96 ):Request send by Friendlyname
( 3-21-2014 22:55:30:96 ):Webserer Request URL : http://h20614.www2.hp.com/ediags/solutions/software?client=PIW&FriendlyName=HP Photosmart Prem C410 series&OS=Windows NT 6.2
( 3-21-2014 22:55:31:362 ):Inside CheckForSoftware Method..
( 3-21-2014 22:55:31:362 ):MsiEnumRelatedProducts Failed with Upgrade code : {CC6EF10F-6CFE-4660-85B4-4CED9EEC7B5B}
( 3-21-2014 22:55:31:362 ):Insert device details to Matrix
( 3-21-2014 22:55:31:362 ):Requet Send to Terminate Thread .!!
( 3-21-2014 22:55:31:362 ):Thread Terminated.!!
( 3-21-2014 22:55:31:362 ):Returns from CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:55:31:362 ):Number of Devices Enumerated : 1
( 3-21-2014 22:55:31:362 )evices Connected/Installed
( 3-21-2014 22:55:31:362 )howing Device Dialog..
( 3-21-2014 22:55:31:425 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:31:440 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:55:31:440 )et Aboutbox string..
( 3-21-2014 22:55:31:456 ):Window is set as foreground
( 3-21-2014 22:55:31:456 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:31:456 )evice Dialog :: OnInitiDialog()
( 3-21-2014 22:55:31:471 ):Calling EnumerateDevices(false)
( 3-21-2014 22:55:31:471 ):Returns from sparkBL-> GetSoftwareAvailabilityMatrix/ GetLatestSoftwareAvailabilityMatrix
( 3-21-2014 22:55:31:471 ):m_listPrinters.DeleteAllItems()
( 3-21-2014 22:55:31:471 ):Number of Devices added to List : 1
( 3-21-2014 22:55:31:471 )evices added to List
( 3-21-2014 22:55:31:471 ):Returns from EnumerateDevices..
( 3-21-2014 22:55:31:471 )etReEnumerationFlag : True
( 3-21-2014 22:55:31:487 )evices Listed..
( 3-21-2014 22:55:31:487 ):m_listPrinters.SetSelectionMark(0).
( 3-21-2014 22:55:31:487 )et iDevNdx = m_listPrinters.GetSelectionMark().
( 3-21-2014 22:55:31:487 )elected device index, iDevNdx = 0
( 3-21-2014 22:55:31:487 )elected device index changed, Now iDevNdx = 0
( 3-21-2014 22:55:31:487 ):calling sparkBL.SetDeviceMatrix(m_DeviceSoftwareAvailabilityMap[iDevNdx])
( 3-21-2014 22:55:31:487 ):Returns from sparkBL.SetDeviceMatrix()
( 3-21-2014 22:55:31:487 ):Calling Updatestatus
( 3-21-2014 22:55:31:487 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:31:487 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:31:487 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:31:487 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:31:487 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:31:487 )evice Not Installed.!!
( 3-21-2014 22:55:31:487 ):No Bad devnode
( 3-21-2014 22:55:31:487 ):No Driver Issue
( 3-21-2014 22:55:31:503 )ort Issue Found.!!
( 3-21-2014 22:55:31:503 ):Missing Driver Issue.!!
( 3-21-2014 22:55:31:503 )rint Not Installed.!!!
( 3-21-2014 22:55:31:503 )can Not Installed.!!!
( 3-21-2014 22:55:31:503 )evice has FULL Solution
( 3-21-2014 22:55:31:503 ):Calling UpdateVidPid
( 3-21-2014 22:55:31:503 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:31:503 )elected Device's PID : 0
( 3-21-2014 22:55:31:503 ):Calling UpdateModelNumber
( 3-21-2014 22:55:31:503 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:31:503 ):Modelnumber : CQ521A
( 3-21-2014 22:55:31:518 )isable the sorting of devices in ListCrtl
( 3-21-2014 22:55:31:518 ):Returns from Device Dialog :: OnInitiDialog()
( 3-21-2014 22:55:38:285 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:38:285 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:38:285 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:38:285 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:38:285 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:38:285 )evice Not Installed.!!
( 3-21-2014 22:55:38:285 ):No Bad devnode
( 3-21-2014 22:55:38:285 ):No Driver Issue
( 3-21-2014 22:55:38:285 )ort Issue Found.!!
( 3-21-2014 22:55:38:285 ):Missing Driver Issue.!!
( 3-21-2014 22:55:38:285 )rint Not Installed.!!!
( 3-21-2014 22:55:38:285 )can Not Installed.!!!
( 3-21-2014 22:55:38:285 )evice has FULL Solution
( 3-21-2014 22:55:38:301 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:38:301 )elected Device's PID : 0
( 3-21-2014 22:55:38:301 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:38:301 ):Modelnumber : CQ521A
( 3-21-2014 22:55:38:426 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:38:426 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:38:426 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:38:426 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:38:426 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:38:426 )evice Not Installed.!!
( 3-21-2014 22:55:38:426 ):No Bad devnode
( 3-21-2014 22:55:38:426 ):No Driver Issue
( 3-21-2014 22:55:38:426 )ort Issue Found.!!
( 3-21-2014 22:55:38:426 ):Missing Driver Issue.!!
( 3-21-2014 22:55:38:426 )rint Not Installed.!!!
( 3-21-2014 22:55:38:426 )can Not Installed.!!!
( 3-21-2014 22:55:38:426 )evice has FULL Solution
( 3-21-2014 22:55:38:426 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:38:426 )elected Device's PID : 0
( 3-21-2014 22:55:38:442 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:38:442 ):Modelnumber : CQ521A
( 3-21-2014 22:55:47:115 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:47:115 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:47:115 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:47:115 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:47:115 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:47:115 )evice Not Installed.!!
( 3-21-2014 22:55:47:115 ):No Bad devnode
( 3-21-2014 22:55:47:115 ):No Driver Issue
( 3-21-2014 22:55:47:115 )ort Issue Found.!!
( 3-21-2014 22:55:47:115 ):Missing Driver Issue.!!
( 3-21-2014 22:55:47:115 )rint Not Installed.!!!
( 3-21-2014 22:55:47:115 )can Not Installed.!!!
( 3-21-2014 22:55:47:115 )evice has FULL Solution
( 3-21-2014 22:55:47:115 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:47:115 )elected Device's PID : 0
( 3-21-2014 22:55:47:130 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:47:130 ):Modelnumber : CQ521A
( 3-21-2014 22:55:47:146 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:47:146 ):FTP URL : ftp://ftp.hp.com/pub/softlib/software12/COL34152/mp-109793-1/PS_AIO_07_C410_140_408.exe
( 3-21-2014 22:55:47:146 )howing Downloading Dialog..
( 3-21-2014 22:55:47:162 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:47:162 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:55:47:162 )et Aboutbox string..
( 3-21-2014 22:55:47:193 ):Window is set as foreground
( 3-21-2014 22:55:47:193 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:47:209 ):-------HPPIW SOLUTION DOWNLOAD INFO------
( 3-21-2014 22:55:47:209 )olution Download Link :ftp://ftp.hp.com/pub/softlib/software12/COL34152/mp-109793-1/PS_AIO_07_C410_140_408.exe
( 3-21-2014 23:0:16:422 ):Running Processes :
( 3-21-2014 23:0:16:422 ):[System Process]
( 3-21-2014 23:0:16:422 )ystem
( 3-21-2014 23:0:16:422 ):smss.exe
( 3-21-2014 23:0:16:422 ):csrss.exe
( 3-21-2014 23:0:16:422 ):wininit.exe
( 3-21-2014 23:0:16:422 ):csrss.exe
( 3-21-2014 23:0:16:422 ):winlogon.exe
( 3-21-2014 23:0:16:422 ):services.exe
( 3-21-2014 23:0:16:422 ):lsass.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):dwm.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):RtkAudioService64.exe
( 3-21-2014 23:0:16:437 ):RAVBg64.exe
( 3-21-2014 23:0:16:437 ):RAVBg64.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):spoolsv.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):armsvc.exe
( 3-21-2014 23:0:16:437 ):AERTSr64.exe
( 3-21-2014 23:0:16:437 ):AppleMobileDeviceService.exe
( 3-21-2014 23:0:16:437 ):AdminService.exe
( 3-21-2014 23:0:16:437 ):mDNSResponder.exe
( 3-21-2014 23:0:16:437 )fficeclicktorun.exe
( 3-21-2014 23:0:16:437 ):dasHost.exe
( 3-21-2014 23:0:16:437 ):HeciServer.exe
( 3-21-2014 23:0:16:437 ):McSvHost.exe
( 3-21-2014 23:0:16:437 ):mfevtps.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):RichVideo.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 )ocketCloudService.exe
( 3-21-2014 23:0:16:437 ):WyseRemoteAccess.exe
( 3-21-2014 23:0:16:453 ):McAPExe.exe
( 3-21-2014 23:0:16:453 ):mcshield.exe
( 3-21-2014 23:0:16:453 ):mfefire.exe
( 3-21-2014 23:0:16:453 ):svchost.exe
( 3-21-2014 23:0:16:453 ):svchost.exe
( 3-21-2014 23:0:16:453 ):svchost.exe
( 3-21-2014 23:0:16:453 ):taskhostex.exe
( 3-21-2014 23:0:16:453 )ynTPEnh.exe
( 3-21-2014 23:0:16:453 ):explorer.exe
( 3-21-2014 23:0:16:453 ):GoogleCrashHandler.exe
( 3-21-2014 23:0:16:453 ):TabTip.exe
( 3-21-2014 23:0:16:453 ):TabTip32.exe
( 3-21-2014 23:0:16:453 ):GoogleCrashHandler64.exe
( 3-21-2014 23:0:16:453 )earchIndexer.exe
( 3-21-2014 23:0:16:453 )kyDrive.exe
( 3-21-2014 23:0:16:453 ):WmiPrvSE.exe
( 3-21-2014 23:0:16:453 ):dllhost.exe
( 3-21-2014 23:0:16:453 )ettingSyncHost.exe
( 3-21-2014 23:0:16:468 ):BtvStack.exe
( 3-21-2014 23:0:16:468 ):ActivateDesktop.exe
( 3-21-2014 23:0:16:468 ):RtkNGUI64.exe
( 3-21-2014 23:0:16:468 ):RAVBg64.exe
( 3-21-2014 23:0:16:468 ):RAVBg64.exe
( 3-21-2014 23:0:16:468 )ynTPHelper.exe
( 3-21-2014 23:0:16:468 ):igfxtray.exe
( 3-21-2014 23:0:16:468 ):igfxsrvc.exe
( 3-21-2014 23:0:16:468 ):hkcmd.exe
( 3-21-2014 23:0:16:468 ):igfxpers.exe
( 3-21-2014 23:0:16:468 ):quickset.exe
( 3-21-2014 23:0:16:468 )ellSystemDetect.exe
( 3-21-2014 23:0:16:468 )DVD10Serv.exe
( 3-21-2014 23:0:16:468 ):McUICnt.exe
( 3-21-2014 23:0:16:468 ):hppiw (9).exe
( 3-21-2014 23:0:16:468 ):hppiw.exe
( 3-21-2014 23:0:16:468 ):AbsoluteReminder.exe
( 3-21-2014 23:0:16:468 ):CLMLSvc_P2G8.exe
( 3-21-2014 23:0:16:468 ):IAStorIcon.exe
( 3-21-2014 23:0:16:468 ):IAStorDataMgrSvc.exe
( 3-21-2014 23:0:16:468 ):Jhi_service.exe
( 3-21-2014 23:0:16:484 ):WmiPrvSE.exe
(FYI - Could not post whole log due to the 50,000 character limit. No errors reported after this point)

Firstly, thanks for your suggestion. I appreciate it.
Secondly, sorry it took so long to get back to you. The computer is my wife's and she been quite busy with it so I haven't had the chance to test out your suggestion.
Unfortunately, your suggestion didn't work. I tried it multiple times with no luck.
Here's some additional data.
(1) As for the "ReadMe" issue (mentioned in the initial message), the "autorun.infla..." issue looks like the first "%" in the "%lang%" string is in fact the name of the file "autorun.inf". So when "%lang%" is being printed, "autorun.inf" is being substituted for the first "%", hence "autorun.infla...".
Not sure if that helps.
(2) I tried running HP Print and Scan Doctor and I saw something unusual. The initial page shows the following:
Product Connect Software Status
Prem C410,192.168.1.7 Network(192.168.1.5) Installed
Prem C410,192.168.1.7 Network(192.168.1.7) Installed
There is ony 1 printer hooked to the network. I searched through the registry and I did find instances of "192.168.1.5" and "192.168.1.7".
(3) I also tried using the various uninstallers under util\ccc.
L1: Completed with no issues.
L2: On step 10/12, a popup window indicates "Hp Installer Uninstaller has stopped working". I click "Close Program" and that's the end of the processing.
L3: Same as L2. But, after closing the program, a pop-up window asks "Are you sure you want to remove from your computer?" (FYI - No, I did not miss anything here. That is exactly as it is printed. There seems to be 2 spaces between "remove" and "your" as if a filename or program name should go here.) I click "Yes", eventually the screen indicates 100% complete and I click "OK". This sequence happens 3 more times (pop-up followed by a 100% complete screen). After the 4th time, a screen indicates the process is complete, I hit "Finish" and the computer automatically reboots.
L4: Exactly the same as L3.
At times when step 10/12 failed, the "Current Progress" will be stopped on "Software\Wow6432\Hewlett-Packard\" followed by other registry entries. I've searched through the registry and I can find only one entry that matches this: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432\Hewlett-Packard. But, none of the entries that follow that on the "Current Progress" bar match any entries. (Ex: Software\Wow6432\Hewlett-Packard\DigitalImaging\CUE Settings. This key does not exist. There is a HKEY_CURRENT_USER\Software\Hewlett-Packard\DigitalImaging\CUE Settings, but not one tagged with the "Wow6432" entry.
Anyway, it looks like something has gone wrong with this computer's registry. I reluctant to start hacking away at the registry.
I could use some more suggestions.
Thanks!
Ted

HP solution center windows 8.1 update for C8180

I just updated from windows 7 til windows 8.1 and my solution center for HP C8180 dissapeared. The printer is working well but the scanner quality is pretty poor.
Please advise how I can download HP Solution Center for Windows 8.1?
Best regards
Keld

Hello Keld, and welcome to the HP Forums.
I see you are looking for the Solution Center software. I would like to try and help.
I would recommend downloading and running the HP Photosmart Full Feature Software and Drivers. Once the software is launched it will allow you to install any missing software.
Please let me know how that goes. Thanks for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Adobe Flash security exposure in HP Solution Center Digital Imaging code

I have an HP Officejet 4500 with the HP Solution Center installed.
Windows XP.
My security software identifies "Adobe Flash Player Multiple Vulnerabilities" embedded in the HP Digital Imaging product.
The versions and locations are:
Adobe Flash 10.0 r2
C:\Program Files\HP\Digital Imaging\{7E0E61CC-1C99-429D-BEA7-C4DD5B898D2A}\setup\hwsetupwizard\setup_guide.exe
Adobe Flash 9.0 r115
C:\Program Files\HP\Digital Imaging\Help\player\FlashPla.exe
Apparently the Digital Imaging products uses these for help and setup functions. They were likely installed initially but I can't find any way to update them. I have tried all update functions available for the Solution Center.
Adobe Flash player is at version 11 as the standalone product on my machine, so this is not the issue.
The vulnerabilities are real
http://www.securelist.com/en/advisories/43267/?function=advisories&VN=43267
http://www.securelist.com/en/advisories/41917/?function=advisories&VN=41917
How do I get these Flash product versions updated? I am assuming if I delete the files the help and setup functions won't work.
Thanks

Alright, well.Ltaff, first of all, to let you know Solution Center does not need a different version of Adobe Flash Player. AFP is merely a conduit that puts together the coding for Solution Center so that it can function, and if AFP is not up to date then it can cause problems.
If you have the most recent version, then those security issues have already been resolved through subsequent releases. Now, what it sounds like is that your security software is falsely detecting issues in the program or AFP was not correctly configured.
As a starting step, why don't we uninstall both the printer and Flash Player and reinstall them.
First if you use a USB cord, make sure to remove it. Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
Then follow this link to download the full feature software and drivers for the printer. You will need to search for the correct model number of the 4500 you have (either G510a/g/n or G509a/g/n):
www.hp.com/go/support
Then uninstall AFP from Programs and Features and install it from the download :
http://get.adobe.com/flashplayer/?fpchrome
Install that and let me know the result!
Have a great day!

Lenovo solution center won't install update

Hi,
I've got a rather high spec Lenovo Thinkpad Yoga, which I love. However, the Lenovo Solution Center keeps popping up saying "A new version of Lenovo Solution Center is available. Do you want to update now? <Update now> <Later>
When I click on update now, it downloads the ~35mb download for "2.4.002", but then doesn't install it. I'm concluding it doesn't install it by the fact that it remains on 2.2.002, the next day it'll ask me to download it again, and it does nothing after completing the download that would indicate that it has indeed updated the software.
I'm running Windows 8.1
According to the splash screen for Lenovo Solution Center, it is currently on version 2.2.002, revision 17630.
Thanks!
Andrew

I know this is an old post but for anyone else having this problem...
Once you download the update via Lenovo Solution Center and it doesn't automatically install:
1. Close the Lenovo Solution Center
2. Go to the folder "C:\Users\<username>\AppData\Roaming\LSC\Local Store"
3. Right-Click on the LSCSetup64.exe file (or whatever your LSCSetupXX.exe file is) an choose "Run as Administrator".
Be sure to check the date of the LSCSetupXX.exe file to make sure it is current so you know it is what you just downloaded.
This will install the new version.
Once complete, open the Lenovo Solution Center as normal.
Enjoy!
Frank

HP Solution Center for 2 printers on Windows 7 64bit

I have an HP Windows7 professional 64 bit laptop with a hp photosmart c309g and a Photosmart 7520 e all in one for wireless printers on our home network. the c309g shows up in the HP Solution Center, but the 7520 does not, so we are unable to set up printer shortcuts for easier print or items as either one - sided or two-sided and for changing between regular letter printing to photos.
Is the 7520 able to be added to the HP Solution Center? How? Will we be able to have both in the Solution Center?

Hi,
Have you installed its software and drivers yet ? If yes
Click Start > All Programs > HP > HP [your printer]
Properly installation you will have its icon on desktop.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Solution for Network Printers who've lost Appletalk?

Figured out what appears, so far, to be a solution to those having issues with older network printers and the loss of Appletalk in SL.
After trying everything recommended to make my HP 4050n work under SL, and just about to give up and start shopping for a replacement printer (much to my disgust - my 4050n has been a workhorse and is still in perfect working order, even at 10 years old!), I spied the $29 Apple USB Ethernet Adapter I purchased for my MB Air sitting on the corner of my desk.
Well, I had tried everything else to no avail (because my ethernet IP had to remain unchanged from its DHCP settings for my cable modem to work), I figured, what the heck, and moved the printer's cat 5 cable from my e-net hub/switch to the adapter plugged into a USB port. Lo and behold, SUCCESS!!!
The OS recognized it as a separate "USB Ethernet" device, allowing me to set a separate IP Address for the printer than the modem. Following the steps below, some as outlined already by others, I now have my legacy 4050n working and available as a network printer. Yay!
1. Cold Boot your printer to reset to original factory settings (see manual or mfgr.'s website for method).
2. Print out a configuration page using the printer's menu and note the new IP address (apparently, it's often 192.0.0.192).
3. Plug in your printer's cat 5 cable into the adapter and the adapter into an open USB port.
4. In System Preferences > Network, configure the new "USB Ethernet" selection's IP address manually (I used the "DHCP with manual address" setting) - I found that it's best to set it one number down from the printer address, so, in my case, at 192.0.0.191.
5. Go to Print & Fax in System Preferences and click on the "+" button to add a new printer.
6. In the drop down window select IP for the connection type at the top, then a protocol (in my case, I have the HP with a Jetdirect card, so the choice was the HP Jetdirect socket), the enter the printer address from the configuration printout and type an identifying name into the Name box. When I did this, it almost immediately found the correct Printer driver (something that had alluded me in all my previous attempts!) and I was back in business.
Here's the link in the Apple store to the adapter:
http://store.apple.com/us/product/MB442Z/A?fnode=MTY1NDA3Ng&mco=OTg5MjQ3NQ
Hope this helps!

Hi George,
Does this happen for every Network Printer or specific one?
Did you find any network performance problem during your issue?
Firstly, please check your printer driver, update to the latest version on both client side and Terminal server. If you are using Easy print driver then you can try to disable that and check the result. For that you need to disable the option “Use
Remote Desktop Easy Print printer driver first” under below path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Printer Redirection
In addition also check there is no any network issue. More information:
1. Printer Redirection
2. Bandwidth Allocation for Terminal Server connections over RDP
Hope it helps!
Thanks.

Cannot download Solution Center for Off Jet 6500 Wireless since going to Windows 8.1

I get a failure message and am unable to download HP full feature software (a.k.a. the "solution center") for my HP Officejet 6500 Wireless on my Aspire E1-571-688 Laptop. The solution center was successfully downloaded when I got the laptop in August 2013. It was running fine until I upgraded from Windows 8 to 8.1.
When I discovered that the solution center would not run, I removed the printer and driver software beofre trying to reinstall. When trying to get the Solution Center back, I can't get past the download step because during download it "fails". I was able to download "drivers only" through the "add a printer" option, and I do have printing capability, however I am unable to use the scan function from the laptop (or directly from the 6500).
Weird that I can't get the scan function to work on the unit itself (I get the "no scan options" message when trying to do so) as I have confirmed mutliple times that the printer is successfully connected to the correct network.
Help please! Thank you
Geo48

Geo,
Welcome to the HP Forum.
You will not have access to the full features of the printer software until you manage to install the Full Feature Software. Scanning is one of those functions.
The initial Connection to the Internet is indeed part of it -- you need a reliable, clean, consistant connection that will allow you to download the full data file. Your connection may be dropping out part way through.
You may need to upgrade your network drivers after the Upgrade to Windows 8.1 . There are other issues can can plague a system after the Upgrade, most are well documented at this point. You can check with your system's Forum to what others are saying.
Basic Drivers only are much smaller in size -- just a few MBs.
Random Thoughts..
You need to resolve the network issues so you can download the full software.
You might have a friend download the file onto his computer and transfer the file to your system using a USB stick. This does not fix your network problems but it does solve at least the issue of not being able to get a hold of the installation package.
You might try taking the computer to a friend's house -- if the issue is not within your computer's network setup, then the Upgrade may have "upset" the relationship between the computer and your home network.
Click the Kudos Thumbs-Up to say Thank You for the help." .
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

HP Solutions Center for my Windows 7 64-bit Home Premium PC?

Hello Everyone,
I was able to succesffuly install my HP 1400 series all-in-one printer with my Windows 7 64-bit Home Premium PC.
However, I can not operate the scanning function or configure scanning features of the printer, since I do not have the HP Solution Center software installled on my Windows 7Home Premum PC.
That is the HP support link for me to download tand install the HP Solution Center
on my Windows 7 Home Premum PC?
Thank you.
Best Regards,
-Warren-
This question was solved.
View Solution.

Hi Warren,
I assume you simply plugged the printer without preinstalling any software. Please correct me otherwise.
Please remove the existing device as following:
Unplug the USB from the back of the printer.
Enter Control Panel > Devices and printers
Right click any 1400 printer icon, then click Remove Device.
If there are several icons of your printer, repeat the same for any of them.
Reboot your PC.
Enter Control Panel > Devices and Printers.
Left click once any presented printer (e.g. Fax), then click Print Server Properties on the Top bar.
Click the Driver tab.
If there is any 1400 listed, select it and click Remove.
Select to remove the 2nd option. Remove printer driver and printer driver Package.
Download and install the Full Feature Software for your printer (HP PSC 1400 Series) below:
*Make sure not to connect the USB till prompted to do so during the install.
http://ftp.hp.com/pub/softlib/software11/COL30219/al-75052-1/AIO_CDB_NonNet_Full_Win_WW_130_141.exe
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP solutions center stopped working for photosmart d110a

After using HP Solution Center (HPSC) for scanning on my D110a via wireless connection to my Win8 laptop (all current win8 updates installed) for many months it just stopped working. The printer is recognized in HPSC but after selecting the Scan Picture button it times out with error "The scan cannot be performed because another computer is using the networked device." The extended error informations is 8, 0, [(18, -2147467259)]. I have downloaded, uninstalled and reinstalled HPSC three times and rebooted the pc and the printer each time to try and fix the problem without success. I can see the printer in the Windows Control Panel and can print to it from all networked computers in the house, just no scanning.

Hello again DocRocks,
I have a few other suggestions that we can try.
This may take some time to get all the ducks in a row but I think it may prove to be successful for us.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once the printer is connected to the wall outlet, please do a proper shut down with the use of the on/off button. This will do a semi power reset on the printer .
I am going to give you a link for Uninstalling the Printer Software. Do a complete uninstall of the software and drivers and once it is complete, please restart the computer.
When the computer is back on, disable any firewalls or anti virus protection. We don't want anything getting in the way when we do the new installation.
The next link i have for you is the HP Photosmart Full Feature Software and Drivers. Save this file to the Desktop of the computer so that it creates its own icon. This will make it easy to find when the download is complete.
While the download is taking place, we are going to move over to the printer. On the front panel of the printer use the right arrow key and go to the Setup Icon. Once in the Setup menu, use the right arrow key and go to the Wireless option and press OK. Scroll through the Wireless options until you see Restore Network Defaults. Once the defaults have been reset we are then going to run through the Wireless Setup Wizard.
The Wizard will get the printer back on to the network and you will be prompted for a user name and password.
Back on the computer the download should be complete and you can now double click on the new icon. Follow the installation instructions. You will be given connectivity options and when you choose wireless, you will be asked to type in the IP address that can now be found on the printer.
This should take care of the issues that you have been experiencing.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks again for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Solution Center for C410a printer

I have a HP C410a all-in-one printer. When I try to use the Solution Center to scan something I get the message: "Hp Solution Center can not run because your devise installation is not complete. Please plug in the USB cable or re-run the setup program from the installation CD for a network installation. If this does not complete the installation, or you do not have the CD, access the HP help files by clicking the start menu." The USB cable is pluged in and the installation CD will not run. I can not find a Solution Center download on your web site. How do I get the Solution center to download and/or to work? Thank You Anita

Hi Anita,Follow these steps to troubleshoot a such:http://support.hp.com/us-en/product/HP-Photosmart-Premium-Fax-e-All-in-One-Printer---C410a/4059515/model/4059651/document/c03955262 You may download the latest Full Feature Software including the HP Solution Center from the following link:http://ftp.hp.com/pub/softlib/software12/COL34152/mp-84595-2/PS_AIO_07_C410_FSW_Full_Win_EMEA_140_222-4.exe Regards,Shlomi

Editing Configuration.MOF For Network Printers/Mapped Drives SCCM 2012?

Question is in Configuration Manager 2007 I would edit the SMS Def MOF file and then run Datashift.vbs on all the clients to add a WMI class for mapped drives for inventory. So most of my clients that I upgraded to 2012 already have that class added
to WMI. I just need to figure out what I need to do on the new server and Configuration.MOF (since SMS Def is missing in 2012) to tell it to collect the newly added classes during hardware inventory. I see that you can click on Set Classes in the client settings
but I don't see where you can check mapped drives or network printers there.

There is no out-of-box solution to handle this task.
But try this. This has worked for us really well. We've got 22000 machines inventoried.
http://social.technet.microsoft.com/Forums/en-US/c08c393d-1ea4-4f6b-8f07-affc0f743193/network-printer-inventory-in-system-centre-configuration-manger-sccm-2012?forum=configmanagergeneral#c08c393d-1ea4-4f6b-8f07-affc0f743193

Fatal Error During Solution Center Install - "Key Not Valid for Specified State"

I have encountered an error while trying to install HP Solution Center for my J6480 All-In-One. The software I'm installing is "OJJ6400_Full_10.exe"
I can get past the installation option selections (i.e., the screens that allow selection of which components you want installed) as well the online check for updates to the software. However, shortly after that I get a fatal error the full text of which are:
Error Situation Code: 23551631
The following lines were retrieved from the installation error logs.
Now Launching=X:\hpzmsi01.exe -m dot4wrp "-*"
".\autorun_network.inf" "-networkonly" -| XXX -f X:\DIVins??.DAT
Error message received: Key not valid for use in specified state.
X:\cioum32.msi failed with return code 1603
MSIInstall() failed with 1603
Exit code=1603
Your help is appreciated. Thanks.

Hey @redleader74,
At this time I am going to have you unlock the hidden System Administrator Account and attempt an install under there. Ideally, if everything installs fine you should be able to log back into your normal User Account and the complete software and driver package for your HP Officejet J6480 All-in-One Printer will be installed and functional. Can I please have you follow the steps below.
Step 1: Uninstall Drivers:
Click on your Start menu
Select All Programs
Select the HP folder
Select your HP Officejet
Select Uninstall
Please follow any onscreen prompts to complete the uninstall. Once the uninstall is complete please proceed to the next step.
Step 2: Clear Temp Files:
Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling Bin
Step 3: Unlock System Administrator Account:
Click on your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
Next, close CMD and restart your computer
When your computer comes on log into the new Account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator Account we just unlocked
Step 4: Install Device:
Under the Administrator Account please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Once the download is complete please follow the onscreen instructions to install your printer
Once the installation is complete, please test the functions of your HP Officejet to ensure that everything is functioning properly now. If everything installs fine, log out of the Administrator Account and back into your normal User Account. All the Software and Drivers for your product should show installed now on your Account. Once you're logged into your User Account please test your HP Officejet again to verify that your print and scan functions are still working.
If everything works fine, you will want to Hide the Administrator Account.
Go to your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
Next, close CMD and restart your computer
Please let me know if these steps resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How to Download "HP Solution Center" for Deskjet 6988 on Windows 8.1

I have a Deskjet 6988 printer and a Scanjet G3110 on Windows 8.1 and can only get the basic drivers to download for them. I can scan and print, but I want the HP Solution Center software downloaded so I can control making copies. How do I do that? Thanks for help!
This question was solved.
View Solution.

Hi,
I actually referred to the Deskjet 6988 only as I was confused by the title ;-)
For the Scanjet G3110 you do have a full solution available.
If the scanner is already conneted to your PC, be sure to open Devices and Printers, right click the Scanjet 3110 and select Remove Device.
Unplug the USB and install the following software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=dp-127945-1&cc=us&dlc=en&lc=en...
I'm not surwe if the HP Solution Center will be available as well or may the HP Scanning software only, however the front panel copy button will woirk once the software will be intalled.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Switching network printers for HP Solution Center

Similar Messages

Maybe you are looking for