Switching numbers between acounts?

Hey, I have 5 lines on my account and I'm looking to start an additional individual plan. Say I get a new phone during a Black Friday deal. What I want to know is if I will be able to switch one of the phone numbers from the existing lines to the new account without cancelling the original line. If need be, I'm OK with ordering the phone and waiting a few days to switch numbers.
Thanks.

hazyblue wrote:
i lost my cellphone in a lake fishing. i have another cellphone that i wish to transfer the number to and cancel the other phone. i keep going in circles on this sight to try to find the "suspend...." can i transfer the number w/o affecting my plan or do i just have to wait til the 20-mo period is up to just upgrade???
All you have to do is activate the device that you want to use. You can do this by dialing *228 and selecting option 1, or online through MyVerizon. Note that you can only activate a Verizon-branded phone with a clear ESN (meaning that is not active on another account, or blacklisted because it was reported stolen or associated with an account with a past due balance). If you have trouble activating, dialing *611 should take you to a CSR that can help.

Similar Messages

Can I switch phone numbers between two iPhones?

I have ordered a 3GS, replacing my wife's 2G model. She will now get my 3G model. Do we have to change phone numbers or is there a way to move my 3G number with the 3GS and vice versa. It would be much better if that was possible.

I also wish to switch phone numbers between phones. I just got off the phone with AT&T customer support. You can handle this over the phone. Need to have the two phones in hand at the time. I got through to customer support today with less than one minute on hold. I was quite surprised. AT&T must have really staffed up for the release.

Shortcut for switching / tabbing between open documents?

Hi. In Mac OS in general, you can switch between open documents or windows in the same program via the shortcut COMMANDO + >. Like for instance different windows in Firefox. But in Numbers and Pages, this means zoom in or out.
Does anybody know a shortcut to switch / tab between the open documents in Numbers and Pages?
I have searched google, here and e-mailed for help and found nothing.
Thank you!

Hello Jerry.
There ARE keyboards like that:
http://www.ergoblog.com/2006/09/keyboardwithe.html
http://www.sspdirect.com/large-letter-keyboard.html
You see, just google for "Large letter keyboard" and maybe add Mac. But ones without Mac symbols works just as fine, you just have to learn which key is which.
Seems there is no solution to my tilde-problem...
Thank you my french friend, for the understandning of the swedish problem
Regards,
Kip

Swap phone numbers between two different accounts.

I currently have two phone plans and two phones. One is on my mother's account and the other is a new phone I just started on my Fiance's account. They are completely separate from each other. My mother has a plan she own's and my fiance has a plan she owns.
My question is; is it possible to swap numbers between the 2 phones? I want the number from my old phone that is on my mother's plan to be on my new phone that I just got. My mother plans on letting the other phone run out of contract and cancelling the line. I know I can swap the sim cards, but that would put my new phone on the wrong plan.

Why didn't you perform an Assumption of Liability (AOL) to transfer your original line from your mother's account to your fiancé's account?

Transfer SU numbers between WHs

Hi all.
We are using stock transport orders (STO) between two plants.
The delivering and the receiving plant/storage location are NOT HUM managed, but have WM whit SU.
We need use the same number of SU on the receiving WH that had on the delivering WH. Both WH handle the same range of numbers in SU.
We hare making pick and pack (RF) ussing the SU number like HU number (this works OK, no problem), on the OBD assign the output procedure SPED to create automatically a IBD on the receiving WH (this works OK, no problem). The problem is when I create the TO to the IBD the system don´t assigne the HU number to the SU number on the TO. According to SAP help the system should show me the "handling-unit overview" but don´t make it, what is the problem? I´m right trying to pass the SU numbers between both WHs on this way?.
Thanks
PD. SAP HELP: "1. To create transfer orders, start at Inbound delivery and select Putaway u2192Create
Transfer Orderu2192For Inbound Delivery.
The initial screen for creating transfer orders for inbound deliveries appears.
2. Enter the warehouse number and the inbound delivery.
The handling-unit overview screen appears.
The handling units that were created, along with some additional data, are listed on the
Active worklist tab page
To process all items at once, proceed with the putaway activities without making any
further selections."

Not answer. Closed

HT4623 after the ios 7.0 update my iphone 4s and ipad keep switching in between the home screen and the apple loading screen, can anybody help?

Can anybody help with the above?
i.e
both my iphone 4s and ipad switch in between the home screen and the apple loading screen
Many thanks

I would connect each device to a power source, and then reset them by holding the power button and the home button until they turn off.
If it keeps happening, I would put the devices in recovery mode and restore them with iTunes.
This article will help with that if needed:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808

Why did the trace NOT show the other switches in between?

I have a PC that is connected to a switch (A) in a network. Switch A has many switches in between and connects to another switch B. When I did a trace to the server, the last switch I see in the result is switch B. Also, when I checked to which port of switch B that the server was connected, It showed as Po1. When I did a show cdp neighbor for the interfaces for the interfaces involved inthe bundle, I get a switch and then another. Why did the trace NOT show the other switches in between? Why did I get an arp on Switch B? Could some one explain?

It's hard to tell, but if you have L2 switches, the addresses on those L2 switches are for management purposes only and you won't see a response from a trace. The only time you'll see a response is when the packet is routed between devices and not switched. You'll get an arp request/response across a single vlan. If you have vlan 10 across 10 switches, all 10 switches will see an arp request because they're broadcasted throughout the whole vlan.
HTH,
John
*** Please rate all useful posts ***

I am trying to activate a used iphone, but it wont let me switch numbers. what do i do?

I am trying to activate a used iphone 4, but it wont let me switch numbers. The number pops up in grey writing and doesn't give me an option to change it. what do i do?

Where is this phone number showing up in gray writing? The phone number comes from the SIM card that is in the phone when you activate it.

Is it possible to sync numbers between iPad and iPhone and mac

Is it possible to sync Numbers between iPhone and iPad and IMac. I work in a school and want to keep test scores for my class in the one place without having to manually update the spreadsheets each time I enter scores.
Thanks in advance
Conor

Yes, Numbers syncs (very well) via iCloud. You need to activate Numbers iCloud sync on all of your devices.
On the Mac, go to System Preferences > iCloud and make sure Documents & Data is checked. Also click the Options... button next to Documents & Data and check Numbers.app.
On each iOS device, go to Settings > iCloud > Documents & Data > and turn on Numbers. Also go to Settings > Numbers and turn on Use iCloud.
After you've got things working, it's best to close down the Numbers document on one device before you use it on another.
SG

After installing lion, my computer switches constantly between dashboard and current screen

I installed lion this morning and my screen switches rapidly between the dashboard and current screen, initially i thought it was my mouse, but after changing mouse I still get this issue and when my computer has been out of use for a while, i have to "erase" the screen to get to my login, any ideas?

After restarting your computer, try booting into the "recovery HD" by holding down Option at startup and try re-installing Lion. I had the Same problem when I installed Lion but that fixed it.
Rember: back up your data first through time machine so you can restore to the backup once you get Lion reinstalled.

HT2729 How do I switch movies between sd and hd on my computer

How do I switch movies between SD and HD.

System Preferences > Display > Arrangement
Drag the white Menu bar from the main screen to the second screen.

Miix 2 10" led diod on the switch filter between display and edge frame

Hello,
i have Lenovo Miix 2 10" and i find out, that indicative led diod on the switch filter between display and edge frame of tablet when is the dark.
It is obvious in the night and tablet is moderately incline...
https://onedrive.live.com/redir?resid=2193765AA1BD42F1!7232&authkey=!AJ7TZCTfNtVztuI&v=3&ithint=phot...
Is it reason for reclaim?
Thanks
sg

Hi chuck72352,
after you have sorted your data, you can use the InRange Function. Combined with a "search 1D Array" you'll get the range you really want.
Mike
Attachments:
ArraySubset.PNG ‏25 KB

My iphone get switched off between when i use camera or any internet appliaction, e ven though my battery is at 100% please help ....!!! i use iphone 3gs model no A1303

my iphone get switched off between when i use camera or any internet appliaction, even though my battery is at 100% please help ....!!!
i use iphone 3gs model no A1303... AND SOME OF THE APPLICATION LIKE SAFARI & FACEBOOK AND WHATS APP GET CLOSED IN BETWEEN WHEN I AM USING

Go to itunes and restore your phone from backup, make sure you have a recent backup in itunes of your phone first.

My computer screen is skipping and switching erratically between sites. Sometimes it just switches to a grey dashboard screen.Has anyone had this problem?

My computer screen is skipping and switching erratically between sites/functions. Sometimes it just switches to a grey dashboard screen. Has anyone had this problem?

Please tell us you iMac model and the Mac OSX version you run. iMacs have been in continuous production since 1998 in four broad families and hundreds of variants. Without knowing your specific Mac type, someone trying to help might give you advice inappropriate for your model.
A good place to start to determine in which family yours resides is to do "About this Mac" from your Apple menu (left end of menubar) to get this window:
Note I've indicated two entries with red arrows. Please tell us what your computer shows for "Version" under OSXn and for your processor.
The forum you are in now, "iMac (PPC)" is for iMacs made between 1998 and 2006.

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

Hi...
Mac OS X keyboard shortcuts
Control-F4
Move focus to the active (or next) window
Shift-Control-F4
Move focus to the previously active window
By the way... since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
Click Help then click Help Center
As an example type in keyboard shortcuts
You can use the Help menu for almost any application on your Mac.
Apple - Find Out How - Mac Basics
For held switching from PC to Mac > Apple - Support - Switch 101

Switching numbers between acounts?

Similar Messages

Maybe you are looking for