Switching off a program

we are implementing multiorg.we have a report for seven different countries which run the same report under different responsibilities.
this report uses a package that gets the required data into it.now my functional spec says this program is switched off for two countries like greek and turkey because this report does not support the functionality for that particular countries.
i need to change some logic in the package in that report.but i cant understand the meaning of switching off the program, as i am able to run the report from the responsibility for greek and turkey.
i changed the logic and trying to run the report for greek and turkey but still getting the old output.is this anything to do with the switching off the program.
this is AR reconciliation report.

Yes it is customized AR auto recon
Our development instance is recent refresh of the production instance and the auto reconciliation is turned off for greek and turkey in the production.
I don't know how they do that but i think this might be the reason
that i cannot run my changes in the development instance. Because when i run the same changes in other instance(a third one) i can find the difference in the output.
I am not sure about this.any inputs for this?

Similar Messages

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus. How can i solve this problem?

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1038650 /questions/1038650]''
After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus. Although i can switch them on and reboot firefox to fix it, but it is a little bit boring. How can i solve this problem?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus.

After every Firefox 34.0 reloading my add-ons have been switched off by unknown program or virus. Although i can switch them on and reboot firefox one more time to fix it, but it is a little bit boring. How can i solve this problem?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone

Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone

Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage.

Touchsmart, 610-112it fully switched off by a program

Running a game, Call of Duty MW3, sometime my computer fully switches off, without any warning and without any regular log out preocedure, it just swithes off as if someone pulls the electric wire. It's like something very dungerous is happening and the pc decides to quit at all. This happens only using this game. Any idea on why this happens or when this should happens if, it's a safety feature?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Switch off asistant in program

Hi,
How to switch on or off the asistant in any ABAP program
this ption is there in edit->modification operations->switch off asistant.
Regards,
Sonika

Hi,
i am trying to modify a Z program and the switch on option is alreday activated there.I can switch off that option.
but i want to how to activate it in Zprogram?
Regards,
Sonika

HT4759 I have lost my iPhone 5 how do I find it in a switched off mode

I have lost my Apple iPhone 5 three days back.its switched off now how do I find it.please help

Look for it. If it is off, it will not be putting out a signal for any program
to find it. You cannot turn it on remotely.

WiFi issue: Is it possible to change WiFi settings in a way that it does not switch off in the screen-lock mode?

I have iPhone 4 and 4s. WiFi is automatically switching off on both phones when they are inactive (screens are locked). It is connecting back after some seconds I unlocke the phone. But because I have no subscribtion for the Cellular data usage, I am being cuted from Internet all screen-locked period. All that time people are not able to reach me by email, skype, or other programs using Internet. It is quite uncomfortable, especially when waiting for something important! Is there a way to change this setting?

The iPhone does not shut down WiFi completely when asleep. It does use a power conservation mode. You should still receive notifications. There is no setting for this. It should work for you as it does for me if you don't have a network problem.
There are lots of problems reported with D-Link routers and they don't have a great reputation. If there is no help available from D-Link you may want to consider installing the DD-WRT firmware. It's available for the D-Link 615. See here for information: http://www.dd-wrt.com/site/index
By the way, you do have Notifications enabled for the Apps you are talking about right? See Settings -> Notifications and Mail, etc.

How to switch off shortcut / alias arrows?

Hello,
Is there any way to switch off the little shortcut / alias arrows in the bottom left corner of an alias in OSX?
Thanks!

Yes you can but as 2Point5 notes it isn't a good idea. But if you are intent on doing so, the simple way is to download and purchase a program called Candybar. The arrow is basically a badge that's applied over an icon. In Candybar you can replace the arrow badge with one of your own - a totally transparent icon for example.
However, having done this, you will no longer be able to look at an icon and know if it is the real file or the alias. You'd have make sure that all your aliases were named with alias or some symbol or labeled with a color or you'd have to do a Get Info to see if it was an alias or not. All this sounds like a good recipe for accidentally erasing the real file and not the alias.

How to switch off the induction furnace with LabView efter an LCF test is finished?

Hi,
I am working with low cycle fatigue testing at Instron 8801 and are
using Instron Fast Track2 LabView LCF software for controlling tests,
read the files, calculate modulus, etc. and produce figures. For
heating of the specimens during LCF-tests I use induction furnace with
Eurotherm 2604 controller. The problem I have is how to stop or switch
off the induction furnace when the test is finished?
I would be very grateful if You have any suggestions how to solve this
problem.
Regards

That depends on how you want to turn it off. I am not familiar with the Instron Fast Track, but the Eurotherm can be controlled directly from Labview using the modbus comms. When the test is finished, you can send a reset program command(if a program is running), or send a different setpoint, etc.
If you have digital outputs available on your computer, you could wire one of them to a digital input on the 2604 to do just about anything.
If you have the OPC version of Eurotherm iTools, you can control the 2604 with Datasocket connections.
Please give a few more details, and maybe we can figure out the best way to do it.

CS6: Can't switch off color management in the printerdriver when photoshop manages colors

So this is weird: I'm using CS6 Extended and Lightroom 5 on a Windows 7 Pro machine, printing to an old Canon Pixma Ip5200R. When i print from Lightroom, i am using a special printer profile for the pixma and my photopaper, so color management is switched off in the printer driver. The photos print fine.
Now when i print the same photo from CS6, it has a magenta color cast, so clearly something is wrong with the color management. Even though i am using the same printer, the same paper, the same printer profile and - of course! - had set photoshop to manage the colors, and switched color managent off in the printer driver. The magenta cast could be an indication that the photo is double colormanaged.
It took my quite a while to find out what happens, and this is really weird: When i re-checked the printer driver settings, i noticed that the color management settings did not stick. The canon printer driver offers the options "driver matching" "windows ICM" "none", e.g. having color management done by the printer driver or windows, or switch color management off. So when i go to the PS print settings and set it to "photoshop manages colors", add the correct printer profile, i have to check the settings in the printer driver and make sure that color management is set to "none". I set it to "none" and click OK. Now everything should be configured correctly. But it's not - because when i re-check the print driver settings, i see color management is set to "diver matching". I can go to the print driver settings again and agian, but whenever i check, color management is set to "driver matching". This setting simply does not stick. No wonder i get a mangenta cast on my prints, the colors are doublemanaged by photoshop AND my printer driver.
Now, this is getting weirder: Only the color management settings don't stick. I can change other settings like print quality and the stick.
But - how do i get rid of this? The culprit seems to be photoshop, not the printer driver. If i print from lightroom, i can change the color management settings in the (very same) printer driver and they stick. When i set the photoshop print dialogue to "printer manages colors" i can change the color management settings in the (very same) printer driver - and they stick! So this looks as if photoshop stops me intentionally from using the correct printer driver settings, that is from switching off the printer drivers color management if it is set to manage colors.
I have already resetted my personal photoshop preferences, but this changed nothing. What am i missing? What is going wrong? Your help is very appreciated.
Tobias

Hi all, Just to let you know that I finally solved my problem myself.
Essentially what had occurred was that I had updated my Epson driver for my printer , but it hadn't installed, despite informing me that it had! To cut a long story short when I checked in System preferences the older driver for Leopard O/S was still the current driver. I proceeded to ask Epson support for assistance, bu despite their efforts I could not immediately resolve the problem. They were directing me to my Utilities program to remove all traces of my current driver from Printer Utility which did not exist. When I queried this they stated it was not always visible and I should proceed to the next step then install the new driver. Problem was they required me to access this invisible utility in order to complete this process, and yes before you ask I had informed them I was using an Intel Mac with Snow Leopard 10.6.2 O/S. Finally I ignored their advice and took the following steps:
1. I opened System Preferences and double clicked the Printer & Fax icon.
2. I highlighted my Epson R2400 Pinter and removed it by clicking the minus sign at the bottom of the Printers window.
3. Next I did a search and deleted any old drivers for my R2400 that were on my system with the exception of the new Driver.
4. I restarted my Mac Pro.
5. I reinstalled my new printer driver which I had previously downloaded from Epson Support.
6. I restarted my Mac Pro and found that the new driver had installed correctly and full functionality had been returned to the Print Features Dialogue box i.e I could now turn of color management and access advanced features to set the quality of printing using the full spec of the R2400.
Hope this post will be helpful to others if they have a similar problem
Regards Denis
Message was edited by: Denisimo
Message was edited by: Denisimo

Optical audio in Lion switches off after 30 seconds

I have a new iMac 27" Computer purchased November 2010 with Snow Leopard on. I have upgraded to Lion OS the day it came out.
When I started using it, I noticed that the Optical steam (red beam) would switch off after roughly 30 seconds. I researched this issue and found that OS X powers down the Sound Hardware after 30 seconds if not used, as it is fine under Bootcamp with Windows 7.
So I used a program called Sound 1.0,1 to stop the Optical connection switching off, by playing a silent sound every 20 seconds. But now Lion does not support PowerPC programs by Rosetta, so am back to the original problem, that if the hardware has switched off, I miss the first 2 or 3 seconds of the start of the audio, like Skype announcing that some has signed in / out or on MSN as a message notification.
Any ideas to sort this annoying problem be most grateful.
Peter

Thanks for your help Andrew.
Have tried that and seems to be working at the mo (touch wood). See how it goes.
Can't tell you what a difference it is compared to the monitors speakers.
Thanks Again
Peter

Using maps, my iPhone 3gs switches off

My 3gs, connected via WiFi, just switches-off after few minutes and I need to make a soft reset to restsrt. This happens with the Apple program Maps and also with the program My Maps. Any suggestion of what is the cause? iOS5 is used.

I have to add that it switch on again only if supplied by the mains or by the Mac. Very annoyng when you are on a trip!

""buffering allowed but switch off", what is it for?

Hi Gurus
I was wondering what does it mean in reality when table have set "buffering allowed but switched off"? What's the difference between "buffering not allowed"?
I'm asking because in Code inspector I'm getting errors about omiting SAP buffers in queries. Problem is that I'm accessing table that has set "buffering allowed but switched off". SAP told me that this is behaviour of code inspector is ok and I think it should be treated as if table has set "buffer not allowed" (so in result no warning from code inspector should pop up). Could you help me with my doubts?
BR
Marcin Cholewczuk

Hi,
on help.sap.com is written:
"Buffering allowed but switched off: The application does not prevent buffering. Application programs accessing the table execute correctly both with and without table buffering. Table buffering is not activated in the standard profile because the table size and the table accesses are not yet known.
Table buffering can be activated at any time in the particular installation by specifying a buffering type."
I think that when Mark Gill in thread [What is Buffer allowed but switched off?|Re: What is Buffer allowed but switched off?; wrote: "Standard tables that have option one (Buffering not allowed) should never be buffered by the customer. Standard tables with option two (Buffering allowed but switched off) are tables that SAP have found can improve performance when buffered but can also cause problems when buffered for some customers, i.e. they can be buffered but it is very dependant on the customer's installation (perhaps very sensitive to different customising settings). If a customer's technical team believes buffering standard tables delivered with option two could be beneficial then they could switch buffering on. Standard tables delivered with option one should never be buffered at any customer site.
So, standard tables delivered with option two, are potential candidates for buffering after a thorough analysis by the technical team members.", he was right and he has explained it good enough.
Regards,
Adrian

Switching off a program

Similar Messages

Maybe you are looking for