Switching off and moving HH4 and OR boxes
Apologies if this question's been asked before, or is a bit simple - but I'm thinking of moving my HH4 and OR boxes, and neatening up the cabling around my desk. The boxes have never been switched off since the day of installatin (in June this year). Would unplugging them now have any detremental affects on their operation, or upload/download speeds? It'll only be a one off switch-off, as their new positions will be permanent.
Any help greatly appreciated.
Solved!
Go to Solution.
Not a problem, a controlled powering down of the modem will not cause a DLM issue.
Similar Messages
-
How can I get my Apple TV airplay to work from my PC. On the airplay symbol it says Multiple Peakers please choose but I cannot switch off my computer speakers and switch on my Apple TV speakers so cannot get airplay to work from my PC. Everything is OK when using my Ipod touch.
Don't use Multiple Speakers option and just choose the AppleTV
What are you trying to Airplay? If it's iTunes content it's simpler to 'pull' the stream from the Computers icson on AppleTV by selecting the libarry and media.
If you are attempting to Airplay the desktop you can't. -
HT1414 my phone went on switch off mode since yesterday and not able to put on again till now.
my phone went on switch off mode since yesterday and not able to put on again till now.
I am having the same problem.
-
Is it normal that every time when I switch off my Iphone 5s and then I turn it on again I have to insert my pin code?
That's what I was suspecting they were asking , but wanted to make sure.
-
my iPhone 4 has switched off for no reason, and now I am unable to switch this on again???if anybody could help about a reboot tip , he's welcome, many thanks...
1. On your iPhone 4 press and hold both the button and the Home button for about ten seconds. After ten seconds you should see the Apple logo showing up.
2. Now try to run you phone again and see if it works.
If a hard reset the still can't get the device back to a working order.
1. Plug in the device to the cumputer and start iTunes.
2. Press and hold the Sleep/Wake + Home for 10 seconds.
3. Once you see the Apple Logo appears, release the power and continue to hold down the home button for about 5-10 seconds. Look iniTunes and see if your device have shows up.
4. iTunes will notify you that you are now in Recovery mode. Click on OK to continue with the restore process.
5. Next press and hold on the SHIFT button and click on the Restore button. Select the latest IPSW file and the prompt appears.
6. iTunes should now attempt to get your device back to the manufacturer setting.
7. iTunes will later give you an opportunity to restore you content from the PC. Every time when you do a sync, iTunes makes a backup so you can choose the latest backup from the sync. -
my phone(4s) switches off automatically at 20% and doesnt start till i cahrge it,and once i put it on charge it shows batterl level 28%,earlier my battery wud drain till 1% then it used to switch off please help
These are usually the features of a faulty battery. Restore iPhone Firmware with iTunes 10.7 or 11 on computer. See if better. If not, and there is Warranty or AppleCare make Genius reservation and take iPhone to Apple for resolution. If no Coverage, still make Genius reservation and take iPhone to Apple Store for free quick (minutes time) battery diagnostic testing.
-
Want to switch off the general search and open the advanced search
Hi All,
I want to switch off the general search and open the advanced search when i load my application. For this I have followed the steps previously posted in the forum.
I have created a version(0001) and for that version i have checked the open advance search. If i do this way it works perfectly but when i click on the result list the detail tab does not come. But when i remove this settings and go through general search both the advance search and the general search works properly. I am able to get the details tab.
Why am I not getting the details tab if i open the advanced search directly. Please give your inputs.
Thanks & Regards,
Anuradha.PHi Anuradha.
Please check the following thread:
URGENT!!! Show Advance Search in INIT event
Best regards.
Armando Rodriguez. -
My iphone 4 suddenly switched off on 70% battery and now it wont switch back on? my home button does not work either so i can not do the normal reset please help!!
Sophierose21 wrote:
my home button does not work
Then it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required... Be sure to make an appointment first... -
My 3 week old iPhone 4S switched off during a call and won't switch back on. Any suggestions??
Sounds like a dead battery. Try plugging it into a charger.
-
Hi. I have downloaded iOS7.1.2 but for installation, it requires power suply. I connected to power suply, but before completion of update installation, I switched off the power plug, and go out of wifi area. Now it has been stoped. My Iphone4 is hanged. Help me
Plug it into your computer and restore it using iTunes.
-
TS3274 MY MINI IPAD keep jumping from screen to screen and moving in and out
mini pad keep jumping and moving in and out.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Not sure you got my earlier message so I am posing my question again.
Having upgraded my iPad to the more recent OSsomething, my mailbox no longer receives or sends emails.
My wifi is fine, checked with my laptop which works fine. I have switched off the iPad many times but the problem remains. Can anyone help?First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
That's not the same as turning it off or on.
Another things to try is to reset your settings. Use the Settings app for this.
Settings > General > Reset > Reset All Settings
You will not lose data but you will have to enter all passwords again.
If the problem persists after the reset check your email accounts on the iPad. You could delete them and add them back. This is also done in the Settings app.
Settings > Mail, Contacts, Calendar -
I have an iphone 3gs and it has suddenly switched off and it won't charge or switch back on HELP!!!!!!!!
Do a reset hold down the home/power button together until you see the apple sign and then release, then wait for the phone to boot back up. If that doesn't work - do the steps while your phone is plug into your PC.
-
my Iphoe is switched off and still viberates. how should i handle that problem?
Try to set it up as new device and don't use the backup afterwards:
How to back up your data and set up as a new device -
Screen switches off when I dial and hit call button
When I select a contact from my list n hit call button or dial a number and hit call button the screen switches off even though the call is going on still. For example if I want to give a missed call it is not possible as the screen is going blank. Is there any setting for it?
Hi Myxperiaz3, welcome t the community!
I agree with @Quester. If you don't have a case or screen protector on the handset you could try clearing the cache or data for the Phone app by going into Settings > Apps > All > scroll down to Phone > tap Clear cache/data. (Try clearing cache first and if it doesn't work go back and tap clear data and test again). If this doesn't help then follow @Uliwoolys suggestion, here are additional steps on running the repair:
back up using PC Companion
1. Go to Support to install PC Companion on a Windows computer.
2. When installed, start PC Companion on the computer.
3. Connect your phone to the computer using a USB cable.
4. Click Start under Backup & Restore.
5. Follow the on-screen instructions.
(Exactly what contents will be backed up may differ depending on phone model.
You can view detailed information about this as you follow the steps in the Backup & Restore wizard).
back up using Bridge for Mac
1. Launch Bridge For MAC.
2. Select "Back up your Xperia device".
3. Select the data you wish to back up from your device (the windows can be expanded for more detail as below; then select "Next".
4. The backup will now be in process, do not disconnect the phone while this runs.
Running the software repair on PC Companion:
1. Install and open PC Companion then select Support Zone.
2. Phone Software Update.
3. Start.
4. Repair Phone
5. Continue
6. Accept data removal
7. Next
8. Wait for prepare
9. Select Phone
10. Follow the connection steps
Running the software repair on Bridge for Mac:
1. Launch Bridge for MAC without the handset connected.
2. On the Main Window select "Xperia > Repair Xperia Device".
3. Ensure the phone is charged and select "Ok" in the following window.
4. Select Continue on the following page.
5. Wait until the initialising step is finished the continue as below.
6 . Select your model of phone from the list that appears
7. Follow the connection steps that appear, ensuring that you are holding the relevant button down before during and after the connection phase until the update/repair begins.
If this still doesn't resolve the issue then I would reccommend contacting your local Sony Xperia Customer Care team asap.
Maybe you are looking for
-
Table of contents using cfdocument
Good day, I've been trying to create a table of contents using cfdocument. I've been unsuccessful in extracting the page number out of the document. I know they are reserved for that scope, but i've tried copying the value into an application variabl
-
interface messageInterface{ getMessage( message ) class B implements messageInterface{ private int A; private int B; public synchronized it(parmA, parB){ A=parmA; B=parmB; sendMessage(); // get message from server p
-
hi, ive just bought a new imac and am having trouble connecting to my old pc. I want to be migrate all my music to the imac, but for some reason or other my imac cant find the pc. Both computers are on connected via the same router, the pc via ethern
-
Linked Images/Files not Updating to Remote Versions
Recently, I've noticed that when I go to upload a new page to our company intranet, any linked images or files do NOT update to the linked versions when they are uploaded --- they are still pointing to the versions on my local drive, so all users see
-
How can i restrict the query specific to the user??
Hi all, I have a query used by multi users; I wanted to restrict the users how can I do that?? Regards Kiran Kumar