Switching off parallelism

I am running a warehouse on HPUX 11 and Oracle 816 (8.1.6 is desupported as of Oct 2001). I have a bug with parallel processing for which there is a patch but only for Oracle 8.1.7 to which I am upgrading shortly.
The Oracle known Oracle bug for those interested is 1793533.
My problem is switching off the parallelism until that time.
I have made the parameters
parallel_automatic_tuning = false
parallel_adaptive_multi_user = false
but there is still parallelism and potentially another database crash waiting for me.
Can anyone think of what else I should do.

The OTN Feedback Forum is for general suggestions and feedback about the OTN site. Technical questions will not be answered in the OTN Forum as it is not monitored by Oracle product teams. Please re-post this question in the appropriate technical forum of the Discussion Forum which is monitored by Oracle product teams. For customers with paid support (Metalink) please go to:
http://www.oracle.com/support/metalink
Best Regards, The OTN Team

Similar Messages

Application Express XE Installation: Switch off Swap Check

Hello
I am trying to install XE into a Parallels Container 6.7 (VPS).
I have created the container Oracle Linux template.
Oracle XE requires a SWAP setting. In a Parallels Container installation you cannot set a SWAP ... That on the service hardware.
Look through the forums I can see you can switch off the Swap Check for a full Oracle Linux installation
http://forum.parallels.com/showthread.php?t=90411
Does anyone know how "switch off" the swap check in XE?
Thanks, Pete

Hello
I just found the solution ... In Parallels Containers 6.7 the Swap parameters is now available
vzctl set xxx ram 4g swap 2g --save
Hope this of use?
Pete
Edited by: Pete88 on Dec 29, 2012 12:45 AM
Edited by: Pete88 on Dec 29, 2012 12:45 AM

Wireless Radio Connection - switches off

My Wireless Radio Connection switches off after about 2-3 minutes. Is there a setting I can adjust to lengthen this amount of time? When it shuts off, all I have to do is FN5 to reconnect but I shouldn't have to do that every 3 minutes. I have a T60. Thank you.

Assuming your're using a version of Windows, use the Device Manager and configure the Advanced Properties
DISABLE /UNCHECK "ALLOW WINDOWS TO TURN OFF DEVICE TO CONSERVE POWER"
Next, ensure all the PowerManager settings are set to a a Max Performance / Vid Presentation Profile but this doesn't necessarily ensure the WiFi NIC could be turned off if you or someone else has tuned the power profiles to disable NIC's after whatever period of time
It doesn't hurt to verify within the BIOS PCI PowerMgmt IS ENABLED and the Smart CPU settings are activated.
If the issue is still occurring then load an alnternate Operating system, Knoppix or SLAX Live BOOT CD's enable the loading and execution of a featured LINUX kernel with driver support for most Thinkpads since it seems te developers of the LIVE CD's use thinkpads themselves or MAC's, it is likely the latest Knoppix distro is compatible with your NIC and observe whether or not the issue still occurs / if so then you can most likely attribute it to an odd hardware issue and you should begin researching whether or not a BIOS upgrade or even Downgrade is a solution.
Before flashing, it is worth taking note of the fact the intermittent power issues seem to be related to your Windows build and you should install a parallel installation of any compatible Windows version then install the barebones necessary drivers to determine if the power issues still occur on a freshly minted version of Windows.
Also, determine whether or not your actual WiFi NIC is flashable, modern network adapaters have increased in complexity especially as a necessity of WOL and the Intel SLM features that more corporate purchasers demand thus NIC's have increased in complexity becoming more like mini VX systems with flashable firmware which may have merit as a solution if you isolate it to your hardware.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

Is there a way to switch off by default the video on FaceTime? I only ever use this app for audio/calls and hate the video being on. I especially hate that if I leave the app open to receive calls it means the camera and green light are on.

My issue is that I can't find a way to have the camera switched off when the app is open and so this means if I want the app open all day to receive calls then the camera is going to be on the whole time. Even if it didn't potentially drain the battery, or add to the CPU usage or whatever else may cause any problems whatsoever (wheel of death!), I just don't want the camera on as I don't see myself ever wanting to use the video call feature but I would use the audio/call multiple times throughout the day to make and receive calls. The camera being on when the app is open is enough to prevent me from using the app. Also ever since seeing that episode of criminal minds where if you saw the green light on above the screen then it meant the killer was watching you!
Basically I just can't believe there isn't a way to disable the camera whilst having the app running. I know when initiating an audio call the camera goes away, but I would like the camera away the whole time. To me it just would make sense that if you click the video option then the camera is on, and if you click the audio option then the camera goes off. It just seems waaaaay to basic a thought for apple to have missed... Let's face it, we're not all as pretty as the people in the apple adverts and don't want to see our ugly mugs staring back as us when we work all day at our macs!

I have exactly the same concern. It seems it would be a simple fix for Apple to allow users to turn off the camera (and even the mic) while keeping FaceTime open -- especially now that it turns out FaceTime must remain open in order to send and receive iPhone calls on a Mac.
I like to think this new functionality of FaceTime will be baked into a future release of Yosemite, as the current setup has that not-quite-finished feel of a work in progress. In the meantime, there's nothing like a little piece of Post-It stuck over the camera to keep the NSA from watching your face as you type a post to the Apple Support Communities.

How do I switch off 3G on iphone 5s

This was always there but now there is only an option to switch off 4g,how can I also switch off 3g.

This thread has osme info related to what you are requesting. It looks like after some carrier updates that this option may be gone.
https://discussions.apple.com/message/24027400

My iphone wont let me recieve yahoo mail, tried switching off phone,taking account off and on cant get server button to move says on but is pale so cant move on or off!!!!

iphone wont let me recieve yahoo mail, tried switching off phone,taking account off and on. did a restore on my phone the yahoo server says on but it is pale so you cant switch off or on. my phone will recieve bt mail and internet not affected. Any ideas on how to fix this?

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

HT1414 i downloaded the ios7, now i cant swipe to unlock my screen, when i go to itunes and click restore iphone it says i have to get into iphone and switch off location services, but i Cant as i am unable to unlock iphone. And my lock button is broken..

i downloaded ios7 my iphone 4s now isnt working i am unable to slide to unlock my iphone, yet my lock button at the top of my phone is broken and has been for sometime so i have been using the accessibility feature to lock and switch off my iphone i can still click on this button and i can still swipe up and down but i am unable to swipe too unlock and enter my passcode.. so i am thinking somethings wrong with the software? when i try to restore my iphone in itunes i am unable to as ios7 needs for location services to be switched off in iphone but i cant do this cos i cant get into my iphone, can someone please help me,,, please,,,

IF the device does NOT have a cracked screen or liquid damage and is in hardware warrenty.. apple can repair/replace the device for free.
Call apple tech to find out what your croverage is for fixing that button
IF IT DOES then you will pay a fee for repairing

Hi I can't update my apps when I try to update it asks for password when used it goes back to update. I think I'm not alone and have tried changing date switching off signing out and in and rebooting. Is there a solution or do I need to take it in?

I can't update my apps each time it asks for password when entered it goes straight back to update. I don't think I am alone in this. I have tried changing the date, rebooting, switching off and on signing out and nothing works. Does anyone know of a solution or will I have to take it to an apple shop. My misses has no trouble with her updates, they are both on iOS 6. Hope someone can help.

Tried that just said cant connect to iTunes Store which was different.

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT201442 my phone was in the middle of updating its software and then suddenly switched off and ive tried to reset it but the itunes symbol appears, I've tried to connect it to itunes but it says it needs to be restored as it is on repair mode.

My Iphone4S was in the middle of updating its latest software then suddenly it switched off, it hasnt turned on since and I've tried to reset it but only the apple sign appears then the plug into ittnes symbol. I've tried to plug it into itunes but it says my phone is on repair mode which is why it needs to be restored first in order to connect to itunes. I have also then tried to restore it but the error sign appears.

http://support.apple.com/kb/HT1808

HT3053 I have a 13inch MacBook Pro and when I switch it on the apple logo appears then a slot and the circular symbol which is turning and then before opening the home screen it switches off again. Is there a sequence that I can use to force it to load.

I have got a 13 inch MacBook Pro and it got stuck in a loop so I switched it off by holding the power button down and now when I switch it on the apple logo appears then I get a blank slot at the bottom of the screen then the circle appears and rotates and then it switches off again, I have tried starting it again with the system disc that came with it when it was new but it makes no difference. Is there a sequence that I can use to force it to start.

Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
Take it to whoever replaced the screen and see if they can help you.
iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

My ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance

my ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts

When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up. when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

My safari won't switch off - what can i do?

i opened a page which should have allowed me to download a mock TOCFL exam (that's the standardized chinese exam in taiwan), but instead i just got a page of gibberish and since then skype won't let me close it, also while closing tabs there's no longer an x to click, instead i have to right click and then close it that way. anyone know what's going on here? also since safari won't switch off, i have no way of trying to deinstall and then reinstall it...any suggestions?

Select  ▹ Force Quit... from the menu bar, then select Safari and press return. Do the same with Skype.
Run Software Update and install all available updates.
Reinstalling system components is rarely the solution to any problem, and certainly not to this one.

Switching off parallelism

Similar Messages

Maybe you are looking for