Switching-off the acceptance of changes while synchronize

Hi
Whenever I synchronize my BB with Desktop Software I have to accept every single change I made in my address book or the calendar.
Is it possible to switch-off this acceptance? I just want to start the synchronization and then my BB should do the rest by itself. I don't want to klick ten times while synchronization.
Thanks for your help.
U.

Hi
In order to mute the keypad tone, use any notification profile other than Normal. Thanks!

Similar Messages

Am using provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down bef

I am using 2 unit provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down before continue to charge my iPad mini again. Of course it will be 100% charge but must make sure the AC charger is cool down completely.
I feel that the provided AC charger that is not suitable for our charging on iPad mini.

I would book an appointment at an Apple Store, if you have one nearby, to have it looked at.
Genius Bar: Preparing for Your Apple Store Appointment

I'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

i'm using a macbook pro 2011 15",while i was charging it,i accidentally switched off the power supply while it is half way charging,will the battery get damaged if charging got interupted and switched on and off?

you are welcome

Switching off the sound while dialing

How can you switch off the sound of the numerical key board?Now, if I dial a number, I hear a sound at each number. I would like to switch it off.Z3

Hi
In order to mute the keypad tone, use any notification profile other than Normal. Thanks!

I switched off the iPhone while it was updating to iOS5.1

before it had completed the update I switched off the iPhone. Now it is not moving beyond the 1st screen with the Apple logo.

Place the device in DFU mode (google it) and then restore.

How to switch off the pop-up message in rspcm

Hi there,
Does anyone know how to switch off the pop-up message in rspcm?
The monitoring user shouldn't get the pop-up below anymore:
Statusänderung des Requests Sollen Folge-Events ausgelöst werden?
The pop-up in english might be
status change of request - trigger subsequent processing? or similar
We would like to outsource the process chain monitoring (rspcm) to our operating.
But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
Thanks for your help in advance.
Regards,
Wolfgang Smetana

Elena,
Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
Arun

How to switch off the Wireless Transmitting of the xDock for the iPod?

Hey,
Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
Thanks for your help. ;-)
Hi,
Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
Vielen Dank im Vorraus f?r eure Hilfe ;-)

turn it into standby mode
unplug the power supply from the x-fi dock
press the volume controller and hold it while plugging the power supply
the link control led on the backside will glow shortly and and turn off
thats it
to reactivate it press both the forward and backward wind button for at least 3 seconds
But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.

My iphone does not automatically switch off the display light when locked. How do I fix this?

I have an iPhone 5 with iOS 8.2 software.
My iPhone does not automatically switch off the display light when it is locked. Therefore, if I get an e-mail/text message/pop-up from other application, the light just stays on, which obviously drains my battery.
The problem just started yesterday, and it has been a couple of days since I updated the software, so I wouldn't think the software update is the problem.
I have tried restarting the phone (using home and lock button), but that did not work.
Something else that seems weird is that once in a while, a blue beam rolls over the screen from one side to the other. I don't know why it does this, and have no idea whether this is related to the display light issue.
I hope someone is able to help by telling me what to do in order to get my phone to act normal again.
Thank you x

Restart your device by holding the home and power button until the Apple logo appears. You will not lose any data.

Switching off the workflows...

During actual production cutover, we need a means of switching off team center and other workflow updates that send information out of SAP during conversion runs and switch them back on again after conversion.
We need something that we can use (like a flag or switch) repeatedly for the release
HEY guys anyidea what can be done about this.. .need to this ASAP... going live in a few days....
Thanks in advance
Update :
For example
Now for a vendor create or change workflow.. we neeed to switch on or off the workflow depending on who is running it.. no which is std WF for vendor ?? i know questions are bit random... any help will do at this point
The business object BUS1008 for vendoe shows a stop sign...what exactly does that mean
The business object BUS2020 ACCOUNTS PAYABLE for vendoR is not implemented
The businedd obhect BUS3008 is active but the event is not implemented or released ..
These are all the details that i have... now i am not really sure who told these ppl that a workflow is triggered at all which sends the data to the Team center..
Any ideas ???
Message was edited by:
Abhishek Dhoundiyal
Message was edited by:
Abhishek Dhoundiyal

Hi,
Though I did not understand what you exactly need I can answer some of the questions you have asked below:
A stop sign in a Business Object indicates that the BO is obsolete and there is a newer version that is available. For example in the case of the vendor the newer version in LFA1.
To understand the various phases in a BO development then refer to this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4ab0e453d11d189430000e829fbbd/frameset.htm
Now coming to the main question of switch off the workflow depending on some criteria. I guess this can be acheived through start conditions. Though a proper business scenario is needed to justify why some people are exempted from the workflow process you can do this through start conditions. You will need to maintain a table where you update the table with the users for whom the workflow is not active and at runtime check the "Document created by" user and check it against the table and update an attribute and have the workflow start on the basis of this attribute.
Hope this helps,
Sudhi

To switch off the monitor and the keyboard lights?

Hello,
Is it possible to switch off the monitor and the keyboard lights of a MacBook Air while I'm using it at home with an external monitor and keyboard?
Many thanks in advance!
manoka

You can turn off the keyboard lights by unchecking System Preferences > Keyboard > keyboard tab > Automatically illuminate keyboard in low light. Then use F5 to lower the keyboard to off.
The Monitor can't be switched off but can be reduced to almost off using the F1 key.

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac.

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac. I have background switching unchecked in my preferences, and I have never selected it as an option. Also, when I go to my preferences, it will show the icon of the picture I changed it to, even though the desktop itself has switched back.

I would start with some basic troubleshooting.
REPAIRING DISK PERMISSIONS -
NOTE: refer to article "About Disk Utility's Repair Disk Permissions feature" found here http://support.apple.com/kb/ht1452 - for the actual apple article on these step. ----
- click finder in the bottom dock, and in the window that opens, select applications in the left column - scroll through until you see the 'Utilities' folder and double click to open it. Then double click on 'Disk Utility'
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'Repair Disk Permissions'
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying 'Permissions repair complete'
Dan Frankes has written an excellent article for Macworld on "Permissions" and the need to repair them - see - http://www.macworld.com/article/52220/2006/08/repairpermissions.html. Another good web site is - http://www.thexlab.com/faqs/durepairfns.html.
REPAIRING DISK - About OS X Recovery - http://support.apple.com/kb/HT4718.
- restart your computer hold down command + R keys on the keyboard to boot you into Lion / Mountain Lion Recovery mode
- select english as your main language then the continue arrow
- select "Disk Utility" on the resulting screen then 'Disk Utility' ---
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'REPAIR DISK' .......NOT "Repair disk permissions"
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying "The Macintosh HD appears OK"
If you get any other message OTHER than "The Macintosh HD appears OK", like "the Macintosh HD was repaired successfully" run the "Disk Repair" again, until it displays "The Macintosh HD appears OK".
Once done, restart the computer as normal

I upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues

i upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues?

From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps!

Does anyone know how to switch off the internal wifi test use a wifi dongle at a usb input?

HI
I am having problems connecting to wifi with a new Mac.
I have tried all kinds of things like shifting and monitoring my router's channel.
Short of using a power cube or crawling under the house and running a cable I have decided perhaps to use a Netgear wifi dongle.
I would like to switch off the internal wifi and allow the external device to connect.
With a new machine I really don't see why I have to do this.
Incidentally all my old devices have no problems with the wifi signal.
Cheers
Jack

Thanks for the suggestions.
Yes I have done all that was suggested on that site.
i have also been in contact with Apple Care.
I have also reset the router firmware.
I downloaded a piece of software called inSSIDer and checked out other wifi channels in the area. I moved my preferred channel to another ones that looked better however that is back on auto now and the router seems to be picking up channel 6 which is the best one and scores the most points.
I use a netgear wifi dongle on my 'smart' tv and was thinking of using that however I am beginning to thisk that 'powerline' products may be the answer.
The Mac is only two weeks old and I seem to be messing about with the wifi connection most of the time.
I actually cleaned the whole disk and reinstalled the operating system earlier this week.
Desperate or what!
Sometimes I think I should just return it but I like to solve problems and will keep going for a while before I lose patience.
Jack

TS1398 I can't access to the web pages thro' Wi-Fi, after switching on the wi-fi.But if I switch off the iphone andswitch on the phone then I can get the web pages.Daily I have to repeat this process to access the web pages.help to solve the problem.

I can't access the web pages thro' wi-fi,But if I switch off the phone and thenswitch on the phone again I am able to access the web pages.Daily I have to repeat this process.help to solve this problem.

Does using 192.168.1.1 get you to the web page?
Firmware Update Process
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
PC Web Browser Configurations
What browser are you using?
If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the local log-in account on the router first.

How would one skip from point to point that the video is changing while editing.

How would one skip from point to point that the video is changing while editing, like if a certain set of pixels changed to white, and then mark it.?
Basically, I have a set camera, and when certain objects change color I want to mark it. Think of a baseball flying through the air off a pitchers hand, and be able to skip to each point the pitcher is in that position.

The only method of this level of content analysis I'm aware of is with your eyes.
You'll just have to wacth the video to find those parts.

Switching-off the acceptance of changes while synchronize

Similar Messages

Maybe you are looking for