Switching off the buffering of number range for Trips (travel expenses)?

Hi,
In Tcode SNRO object RP_REINR has a buffer of 10.
If this is switched off, it could influence the performance.
Has anyone had any experience in switching off the buffering of number range for Trips (travel expenses)?
Thank you.
Kind regards,
Linda

Dear Linda,
I recall switching off the buffer in one of my projects. We did not encounter any problems, since it was a rare activity. Therefore, I do not expect any performance issues on this matter. Anyway, I presume, one can always switch it back.
Regards,
Eli

Similar Messages

Seperate number range for outgoing & incoming documents in the cash journal

Hi all:
i want to know is there a method to have seperate number range for outgoing & incoming documents in the cash journal,I saw that there is a numbering group in ECC6 and i created a numbering group for both incoming & outgoing as well as i define number range for them,and when i tested it always takes the number range of the document type assigned in transaction FBCJCO.
define number range of the numbering group in T.C : FBCJC6

HEllo,
It's not possible to assign this different number ranges:
If you check the SAP note 532888 you'll see the following:
" - Different number ranges for receipts and expenditures
For reasons of clarity, this is not provided - there are already
two numbers per cash journal document (fields POSTING_NUMBER as
well as D_POSTING_NUMB)."
Regards,
Renan

MIGO -Number range for trans./event type WE in year 2012 does not exist

Hi to all
i got one erro while going do MIGO , error is
Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
Error Details :
Number range for trans./event type WE in yar 2012 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
u2022     Material documents
u2022     Reservations?
Thanks in Advance
Rajesh

Hi Tej,
Even I am getting the same error
"number range for trans./event type WE in year 2014 does not exist"
I have maintained the below number range in tcode OMBT,
Am I missing anything?? Please help!!

Number range for trans./event type WE in year 2011 does not exist

hi gurus
when am trying to post GR it showing me the following error 'Number range for trans./event type WE in year 2011 does not exist' please help me.

Hi,
Go to OBA7 and select the transaction event type WL and maintain number range for the year 2011.
Please check and revert.
Thanks
Hrishi

Urgent : Unable to maintain the Number ranges for Excise Groups

Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga Ram

Hello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

How to switch off the Wireless Transmitting of the xDock for the iPod?

Hey,
Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
Thanks for your help. ;-)
Hi,
Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
Vielen Dank im Vorraus f?r eure Hilfe ;-)

turn it into standby mode
unplug the power supply from the x-fi dock
press the volume controller and hold it while plugging the power supply
the link control led on the backside will glow shortly and and turn off
thats it
to reactivate it press both the forward and backward wind button for at least 3 seconds
But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha

The iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger

the iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger. PLS anyone with any solution

@wetdro
If your device has been jailbroken during the warranty, Apple will not service it.
Maybe you missed that in this article:
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

My Led flash light switch on all the time,anybody got the solution.i tried 3 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the

My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.

My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times. 3.press the home button n power button until the apple logo appears. 4.reset my all settings.

Number Ranges for the Serial Number Profiles

Hi All,
We wanted to trace the Goods movement based on the serial numbers. we could make this possible by attaching the serial number profile with relevant procedure (Stock Chk) to the Material.
Now the issue left out is of Number range and the pop-up for the existing serial numbers for the material. Is it possible to define Number Ranges (Ext. / Int) to the Serial Number profile ? Also, to get a pop-up for the serail numbers of material currently in Stock, which can be issued. Currently, I have to get the detail of sr. No. thru' IQ09 / IQ03.
Pls advise.
Shekhar.

Hi,
Yes. In IMG under Plant maintenance -- > Technical objects -->Serial No profile.
Here you can create diff profile with difff procedures.
And mention the properties of each.
There is a material master record for each type in the system. For control purposes, the company wants to know which customer received which collector type, and which serial number(s) of the collector type were supplied to the customer, when the individual solar collectors were delivered.
It is therefore necessary to assign a serial number to the customer delivery in addition to the material number.
A serial number master record is created with the assignment of the serial number. You can maintain data fields specific to the serial number in the master record.
At a later date, it may be necessary to enter equipment master records for materials that have already been serialized and delivered to customers, for example, if the producer of the solar collectors also has to perform maintenance activities for the customers and therefore wants to use all the functions available in the equipment master record for a serialized material.
In order to keep this option open at any time, you must define a number range for serial numbers. The numbers assigned from this number range are not the serial numbers but reserved keys that stand for the combination of material number and serial number and the equipment number that may possibly be assigned.
You can also define one or more serial number profiles.
The serial number profile defines how and under which conditions a serial number is assigned for a material.
Note
A material can only be assigned serial numbers after the required serial number profile has been entered in the material master for a specific plant.

Correcting the duplicate number range for 57 f 4 challan

Dear Friends ,
By mistake I have maintained same number range for both my series group in J1I9 under object J_1I57FC.
Intially I was doing sub con transaction only for one plant , but recently I started doing sub con transaction of the other plant .
It allows me to create 57F4 challan in the second plant , but while using the challan number in MIGO , it shows an error message .
I cannot change the number range for the second plant now because the 57F4 challan has been generated .
Kindly guide me how can I correct the above problem.
Thanks in advance

Hi,
This is a problem for 57F4 challan number range you cannot use same number range for two different series group even while maintaining number range system not issue any message , i faced the same problem then from this fiscal year we have used two separate number range so better create new number range and assing in subcontracting attibutes as this we faced in development for the GR for which we found the problem is not solve.
regards,
zafar

Every Shipping point has corresponding number range for the HU box number?

Hi,
Every Shipping point has corresponding number range for the HU box number assignment?
For example, we are doing packing, then a Handling Unit number has been generated. So where to define this number range of the HU number??
Is it from the SPRO or controled by programs.
Thanks.

Hi,
Please find good stuff on Handling Units Below:
HANDLING UNITS CONFIGURATION:
A Step by Step Guide to the SAP Handling Unit Management Configurations
The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually.
This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
Table of Contents
Objective
IMG Menu The Starting Point
Handling Unit Management Overview
Start of HUM Outbound Deliveries Manual Packing Configuration
Define Number Ranges for Handling Units
Define Packaging Material Types
Define Material Group for Packaging Materials
Define Allowed Packaging Materials
Use Handling Unit Supplements
Maintain Goods Movements for Handling Unit Stock-Posting
Define User Status Profile
Set QM Check and Delivery Type for Each Movement Type
HU Requirement for Storage Locations and Default Values for Deliveries
Packing Control By Item Category
Define Requirements for Packing in the Delivery
Delivery Type Determination
Set Unique Number Assignment for HU Identification
Number Range Maintenance for HU Identification
Define Number Assignment for Each Packaging Material Type
Delivery Output type for Packing List
Maintain the Delivery Output Determination Procedure
What else to maintain after the Manual Handling Units Configurations?
Start of the Automatic Packaging Configuration
Define Number Ranges for Packing Instructions
Define Determination Type for Packing Instructions
Define Number Ranges for Packing Instruction Determination Records
What else to maintain after the necessary Automatic Packaging Configurations?
Appendix A: How to do Manual Packing for Non-Assigned Handlings Units?
Appendix B: Scenario 1 How to do Manual Packing by Delivery Item?
Appendix C: Scenario 2 How to Manual Pack the Materials into Pallets?
Appendix D: How to do Automatic Packing?
Appendix E: How to do Goods Movement for Handling Unit Material?
Appendix F: How to Unpack the Handling Unit Material?
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
Figure 1: Handling unit example
Structure
The handling unit object contains the following attributes:
     Identification number
     Dimensions
     Weight
     Volume
     Status
     Materials and quantities
     Packaging materials
     Packing instructions
A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
Handling unit header
The header data of a handling unit is divided in the following way:
     Weight/Volume/Dimensions
     General data
     Means-of-transport data
     Additional data
     Output determination procedure
For more information about each of these detailed points, see Editing detailed data for handling units.
Status
The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
Handling unit item
The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
Integration
Handling units can be used in all processes within the supply chain.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Number range for the Material type

Hi,
When I am trying to create the number range for the Material Type, when I choose the groups the following error has occurred
No elements exist for the object/sub-object
What may be the problem
Thanks in advance

Hi Binu,
Had similar issue lately.
This is happening as the download of the category is not done properly.
So the solution which wrkd for me was to dwld the content again correctly, and if its done, there'll be no such error shootin up.
Suji

How to setting for the number range for Business Partner

Dear Sir,
I create the new role for Business Parnter , However, I would like to set the new number range for that buiness Partner with that role.
Please kindly advise what is the step to do.
Thank you and best regards,
Vimol

Hi Vimol,
In CRM standard system it is not possible to link specific role with specific grouping.
To achive the same go to following IMG path:
SAP Implementation Guide>Cross-Application Components>SAP Business Partner>Business Partner>Basic Settings>Number Ranges and Groupings>
Define Groupings and Assign Number Ranges
Hope you selected the opton button for column 'Int Std.
I already suggested a work around above.
Best Regards,
Satish Mathala

Switching off the buffering of number range for Trips (travel expenses)?

Similar Messages

Maybe you are looking for