Switching off the fade in/fade out transition when viewing previews

In Library mode, when I'm switching between all my photos, there is a fade in fade out transition as it switches to the next photo.  Can I get rid of this transition?  I would like to just switch to the next photo without any fancy transition.  Possible?

On my Mac version of Lr (4.1) I can't see any such "fade-in/out" effect. Going from one image to the next is pretty much instantaneous.
Sadly, that's about the only thing in Lr 4 that is instantaneous for me.
Phil

Similar Messages

  • How to switch off the red light (optical out) on my Audigy 2

    I am not using the optical out most of the time, is there a way to switch off the red light coming out of optical out?red light is causing heat leading to cracks on the surface of the card.Please help soon. thx

    Are you sure? AFAIK, LED's don't produce any significant amounts of heat. And, no, I don't think the light can be switched off.
    -Dave
    ?[email protected]

  • Is it possible to switch off the retina resolution in Macbook Retina, and view everything like older macbooks?

    I havent yet gotten my self a Macbook Pro Retina yet, but considering.
    When designing websites, it's of course important to be able to easily test how the websites look in different browsers, screensizes and devices.
    So my question is, if I want to see i.e. how images on a website I'm developing would look and scale on older macs and other non-retina devices, is it possible to make the screen "go ugly" again and make 4pixels next to eachother form one pixel.
    Of course, there might be another much better way to accomplish what I'm after, please feel free to present other ideas!
    Also, if it's not yet possible, is the os x open in a way, that I could develop an app that would do it?
    Thank you very much for your replies!

    Retina display: 15.4-inch (diagonal) LED-backlit display with IPS technology
    2880-by-1800
    native resolution at 220 pixels per inch with support for millions of colors
    Scaled resolutions: 1920 by 1200, 1680 by 1050, 1280 by 800, and 1024 by 640 pixels
    Retina display: 13.3-inch (diagonal) LED-backlit display with IPS technology
    2560-by-1600
    native resolution at 227 pixels per inch with support for millions of colors
    Scaled resolutions: 1680 by 1050, 1440 by 900, and 1024 by 640 pixels

  • This u2 album doesnt wanna get deleted out of my phone i hid it from my itunes and switched off the the all music thing out of my music setting but 2 songs still in my playlist how do i permanently deleted out of my life period

    this u2 album doesnt wanna get deleted out of my phone i hid it from my itunes and switched off the the all music thing out of my music setting but 2 songs still in my playlist how do i permanently deleted out of my life period and for some reason it wont let me slide it to the left

    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions
    Delete the "songs" that do not play in your iTunes library and reimport them.

  • Once i am out of wifi network my airtwl 3G netwok does not come back automatically i have to switch off the phone and switch on. any solution

    hi when ever i am out of my wifi network i dont get back my 3 G connection . I have to switch off the mobile and switch on to get back my 3G network of my service provider

    In settings>general> cellular do you have it  turned ON?

  • Hi. I have downloaded iOS7.1.2 but for installation, it requires power suply. I connected to power suply, but before completion of update installation, I switched off the power plug, and go out of wifi area. Now it has been stoped. My Iphone4 is hang

    Hi. I have downloaded iOS7.1.2 but for installation, it requires power suply. I connected to power suply, but before completion of update installation, I switched off the power plug, and go out of wifi area. Now it has been stoped. My Iphone4 is hanged. Help me

    Plug it into your computer and restore it using iTunes.

  • How to switch off the induction furnace with LabView efter an LCF test is finished?

    Hi,
    I am working with low cycle fatigue testing at Instron 8801 and are
    using Instron Fast Track2 LabView LCF software for controlling tests,
    read the files, calculate modulus, etc. and produce figures. For
    heating of the specimens during LCF-tests I use induction furnace with
    Eurotherm 2604 controller. The problem I have is how to stop or switch
    off the induction furnace when the test is finished?
    I would be very grateful if You have any suggestions how to solve this
    problem.
    Regards

    That depends on how you want to turn it off. I am not familiar with the Instron Fast Track, but the Eurotherm can be controlled directly from Labview using the modbus comms. When the test is finished, you can send a reset program command(if a program is running), or send a different setpoint, etc.
    If you have digital outputs available on your computer, you could wire one of them to a digital input on the 2604 to do just about anything.
    If you have the OPC version of Eurotherm iTools, you can control the 2604 with Datasocket connections.
    Please give a few more details, and maybe we can figure out the best way to do it.

  • I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

    I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

    you can suggest it here - http://www.apple.com/feedback/iphone.html
    And it is only a problem if you want a blank first screen.  Personally, it would drive me nuts always having to swipe over one page to get to my apps - the only time I unlock my iPhone is to use it or run an app, so no, I have no need nor desire to have a first screen with no icons at all.
    But, if they'd put it in as an option so people like yourself can also have what they want, that's fine too    So send them your feedback (they actually do listen - iOS 5 includes a number of things people have been asking for on these forums, like being able to delete individual entries from the call history, inproved alerts/notifications, being able to opt out of all the location based data they collect,...).

  • Switching off the workflows...

    During actual production cutover, we need a means of switching off team center and other workflow updates that send information out of SAP during conversion runs and switch them back on again after conversion.
    We need something that we can use (like a flag or switch) repeatedly for the release
    HEY guys anyidea what can be done about this.. .need to this ASAP... going live in a few days....
    Thanks in advance
    Update :
    For example
    Now for a vendor create or change workflow.. we neeed to switch on or off the workflow depending on who is running it.. no which is std WF for vendor ?? i know questions are bit random... any help will do at this point
    The business object BUS1008 for vendoe shows a stop sign...what exactly does that mean
    The business object BUS2020 ACCOUNTS PAYABLE for vendoR is not implemented
    The businedd obhect BUS3008 is active but the event is not implemented or released ..
    These are all the details that i have... now i am not really sure who told these ppl that a workflow is triggered at all which sends the data to the Team center..
    Any ideas ???
    Message was edited by:
            Abhishek Dhoundiyal
    Message was edited by:
            Abhishek Dhoundiyal

    Hi,
    Though I did not understand what you exactly need I can answer some of the questions you have asked below:
    A stop sign in a Business Object indicates that the BO is obsolete and there is a newer version that is available. For example in the case of the vendor the newer version in LFA1.
    To understand the various phases in a BO development then refer to this link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4ab0e453d11d189430000e829fbbd/frameset.htm
    Now coming to the main question of switch off the workflow depending on some criteria. I guess this can be acheived through start conditions. Though a proper business scenario is needed to justify why some people are exempted from the workflow process you can do this through start conditions. You will need to maintain a table where you update the table with the users for whom the workflow is not active and at runtime check the "Document created by" user and check it against the table and update an attribute and have the workflow start on the basis of this attribute.
    Hope this helps,
    Sudhi

  • I upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues

    i upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues?

    From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
    Take the following steps:
    1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
    2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
    The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
    I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
    Hope this helps!

  • Does anyone know how to switch off the internal wifi test use a wifi dongle at a usb input?

    HI
    I am having problems connecting to wifi with a new Mac.
    I have tried all kinds of things like shifting and monitoring my router's channel.
    Short of using a power cube or crawling under the house and running a cable I have decided perhaps to use a Netgear wifi dongle.
    I would like to switch off the internal wifi and allow the external device to connect.
    With a new machine I really don't see why I have to do this.
    Incidentally all my old devices have no problems with the wifi signal.
    Cheers
    Jack

    Thanks for the suggestions.
    Yes I have done all that was suggested on that site.
    i have also been in contact with Apple Care.
    I have also reset the router firmware.
    I downloaded a piece of software called inSSIDer and checked out other wifi channels in the area. I moved my preferred channel to another ones that looked better however that is back on auto now and the router seems to be picking up channel 6 which is the best one and scores the most points.
    I use a netgear wifi dongle on my 'smart' tv and was thinking of using that however I am beginning to thisk that 'powerline' products may be the answer.
    The Mac is only two weeks old and I seem to be messing about with the wifi connection most of the time.
    I actually cleaned the whole disk and reinstalled the operating system earlier this week.
    Desperate or what!
    Sometimes I think I should just return it but I like to solve problems and will keep going for a while before I lose patience.
    Jack 

  • TS1398 I can't access to the web pages thro' Wi-Fi, after switching on the wi-fi.But if I switch off the iphone andswitch on the phone then I can get the web pages.Daily I have to repeat this process to access the web pages.help to solve the problem.

    I can't access the web pages thro' wi-fi,But if I switch off the phone and thenswitch on the phone again I am able to access the web pages.Daily I have to repeat this process.help to solve this problem.

    Does using 192.168.1.1 get you to the web page?
    Firmware Update Process
    To safely update FW, I recommend doing the following: Download the FW file from the support site first.
    Disable the auto update feature on the router.
    1. Save router config to file first using IE or FF with all security add-ons disabled.
    2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
    3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
    4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
    PC Web Browser Configurations
    What browser are you using?
    If IE 8, 9, 10 or 11, set compatibility mode and test again.
    Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
    Clear all browser caches.
    Be sure to log into the local log-in account on the router first.

  • Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart

    Hi. I have downloaded the new iOS 6.0 software update but now I can't switch off the shuffle function when playing music. Help please. Stuart

    I have the same problem and haven't been able to figure it out either

  • I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

    I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Sample rate off the audio input and out devices do not match - what to do?

    This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
    Sample rate off the audio input and out devices do not match
    and am asked to do this:
    Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
    I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
    I am trying to record from LineIn.
    When running on a M-Audio sound card I don't face any problems.
    HP 8560W, sound card IDT/High definition audio Codec
    Any suggestions?
    Knud
    Copenhagen

    You're sure you have set BOTH the input and output settings to 44.1 16 bit?
    Which version of Windows are you running?  There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard.  Especially, you need to ensure that all "Windows Sounds" are turned OFF.

Maybe you are looking for