Switching over from Extended Classic to Classic Scenario

Dear Experts,
If I need to switch back completely from Extended classic to Classic scenario do I need to activate any BADI?
Else I can just deactivate extended classic in SPRO.
Give your comments.
Regards,
B.N.Karthikeyan.

Hi Karthick,
Extended to classic
1. in SPRO - SRM Server - Cross application basic settings - Activate extended classic scenario
-- deactivate the check box.
2 . Cross application settings -- Define objects in backend system ( reservation, PR, PO )
Need to maintain this settings.. like for the sc which document should create in backend like PR/RES/PO.
3.In classic scenario no need to maintain IPC settings.. which require in Extended classic
4. Important thing is you should take care of number ranges..
Thanks
prasad.s

Similar Messages

HT5824 I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. Please help with turning my iMessage completely off..

I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.

If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Z

My Verizon wireless service at my house has begun to degrade over the last 6 Month. It has begun to be very frustrating seeing how we switched over from Satellite to Verizon 4GLTE wireless device. How do I contact someone to see what the issue may be. Zip Code 22580.

Out of curiosity how much data per month are you using? Another factor could be if neighbors have all done the same thing as you and the node is being overloaded on home internet use.

Switch over from active to passive in the cluster

If online EMS Sun Server goes off line , the client looses the connectivity with EMS till the IP address of the other online server is updated in client PC.
When the servers switch over from active to passive in the cluster, we have to change the server IP settings at the client PC manually. Since both the active as well as the passive servers will be pinging, we are not in a position to identify the active/passive servers, so automatic server setting is not possible at the client.
How to find out the solution for which server is active when the swich over is happend.

Hi Kristoffer,
remember to click on enable schedule when you schedule a package.
To know if a scheduled package is ok you can see first if present in the tblschedule of your appset and also if present in the windows task schedulerif with status "ready".
After you just have to check the view status if you found the package execution completed you're sure it's running. " version at the same time can cause issues also with different packages better to schedule with a sufficient delay to be sure that the first has ended, in your case 1 package is ok.
I would delete the 2 packages from bpc, checking also the windows scheduler to be sure that no packages are running and rebuild one from scratch setting repeat every 4 hours and checking "enable schedule".
Regards
Roberto

I recently switched over from Apple to Sony and I would like to know how I can change my settings so that all my iCloud emails are forwarded to my Gmail account?

I recently switched over from Apple to Sony and I would like to know how I can change my settings so that all my iCloud emails are forwarded to my Gmail account?

Log in on iCloud.com and go to Mail. In Mail, at the bottom left you should see a gear icon. Click on it, go to Settings (or Preferences, I'm doing this from memory), and in there you'll find an option to forward your iCloud email to another service.

Switch over from taxinj to taxinn

how to switch over from taxinj 4.7 version to eec6.0, to switch over from taxinj to taxinn, from business data point of view before cutover strategy , what are the things take into consideration , if taxcodes will overlap, with taxinn .
what are the thigs take as precautions.
waiting for ur response. thank you

When you are switching fron TAXINJ to TAXINN, WRT Tax Codes, it is recommended to maintain new Tax Codes for TAXINN, as TAXINJ follows formula based calculation & TAXINN follows Condirtion based calculation.
Regards,
Rajesh Banka
Reward points if helpful.

I am switching over from a PC to a MacBook Pro and an iPad. How do I import my Outlook contacts into MacBook and iPad?

I am switching over from a PC to a MacBook Pro and an iPad. How do I import my Outlook contacts into MacBook and iPad?

One option is forwarding your Outlook contacts as vCard files which can be imported by the Address Book on your Mac, followed by being synced with your iPad.
In Outlook, select all contacts and at the menu bar select forward as vCard. Each contact will be a separate vCard file. Send the email to an email account you are accessing with the Mail app on your Mac.
Save the attached vCard files in a folder created on your Desktop or in whichever chosen location for the folder. At the Address Book menu bar, go to File and select Import navigating to the folder that incudes the vCard files. Open the folder to select.

SRM 5.0 Switching over from EC to Classic scenario

Hello Folks,
We are working in SRM 5.0 Extended classic scenario and the current need is to swipe from EC to the Classic scenario.
I thought it would be a click (uncheck Activation of the EC) and go. But to my surprise, system repeatedly is failing to transmit the Shopping cart into the back-end ECC 6.0 system.
Well...working into Vanilla SAP, my notion is there will be no need to activate any BAdis. Hence no BAdi implementation can be seen active in my system.
Please advice.
Thanks in anticipation.

Hi Marcin,
Thank you so much.
I awarded points for your help.
one quick issue, I am facing problem in posting invoice without reference to the PO. Error message was, "No logical system for FI is maintained. Inform system admin".
It sounds strange as I do have ECC as a solo back-end system. Second, I suppose I did best in assigning the logical system to ACS and SYS (PPOMA_BBP). Can you share your insight.
PS : I know it should be altogether a new thread. Be rest assured I will do all my best to reward your assistance !
Thanks.
Reg,

Mouse pausing every few minutes when switched over from a KVM?

I have just replace my old IOGEAR 2 port KVM that developed issues with a newer version of the same thing and the mouse and Wacom tablet are pausing very 45sec. - 90sec? when switched over to the MINI but run fine on the G5 plugged into the other port.
Nothing has changed except for the replacement 2 port KVM.
Anyone have any ideas???

If you crisscross the outputs from the KVM does the problem then move to the G5 and the mini work OK? That would suggest an issue with the KVM.

Why am I not able to switch over from IE to Firefox?

I am unable to switch from IE to Firefox. When trying to run this file "Firefox%20setup%204.0.1.exe" I get a message that says "Firefox has encountered a problem." I have Windows XP SP3. I switch over on my netbook successfully, which also runs Windows XP SP3, but I'm having problems on my desktop. Also, on both my netbook and desktop, I use Internet Explorer. Am I doing something wrong?

Thanks for your reply cor-el. the file "FirefoxSetup4.0.1.exe" downloads just fine. After it downloads, I'm asked to run "Firefox%20setup%204.0.1.exe" This is the step which is supposed to launch the installation wizard. This is when I get the error message. I even disabled my virus software to no avail. If the file is corrupted, where else can I get the file online? I'm downloading this one from the Mozilla site.

Switching over from pc to mac and need help!

Ok so I plan on getting the new imac they are revealing today, but I'm not completely sure how to transfer all my music over from the pc and how the iPhone will sync as I've heard that the mac didn't recognize the iPhone after it had already been synced with a pc. I was just going to buy an external hd for the music and other things, but I really don't want to spend $100 plus for something that is only for transfer and some backup. I was considering burning cd's as well as I only have about a 250 song library and many blank cd's. Which choice or other option would be best? As for the not recognizing problem, is there something I have to do to like "format" it for mac and a feature I need to set up on the mac? Any help is appreciated.

taymon21,
The iPhone will show up on both a Windows-based PC and a Mac without needing to be reformated. From the File Menu in iTunes you can choose to sync your purchased music back to the computer.
In addition the Apple Retail Stores offer a service to move your files over.
You can burn approximately 150-200 songs per CD as a Data CD in iTunes, and import from there if you would like. You can set the CD Burning preference in iTunes in Windows by going to the Edit Menu, Preferences, Advanced Tab, then the burning section. Choose the option for "Data CD"
Hope this helps,
Nathan C.

When i switch over from PC to Mac?

i have an external hard drive i back all my files up with.
When i finally get my MacBook Pro or Mac Pro to migrate over is there a "wizard" of some type?
Also does the hard drive need to be formatted Fat32 or will OSX read the NTFS?

You will need to use 3rd party software or just drag document files over. The only "wizard" works with OS X volumes.
OS X can read FAT32 and NTFS but it can't write to NTFS without 3rd party drivers or software. MacFuse and MacDrive are two I can think of.
If you ever want to boot from your external, it needs to be formatted to Mac OS Extended (HFS+) and the drive needs to use "GUID Partition Table" rather than Master Boot Record. Disk Utility: Partitions -> Options... is how you change partition tables and reformat.
You might want to have a 2nd backup - I find two is minimum - and keep one as is, and later have rotating backup sets with one set always off line.
If there was one program to use for backups and synchronizing, I would start with free/shareware and excellent Carbon Copy Cloner 3.0b4.
http://www.bombich.com

Automatic switch over from wired ethernet connection to wireless (different internet networks)

I have an Imac connect to 2 different internet service providers 1) a wired connection via ethernet giving a 10mbps download speed but unfortunatley the signal can randomly drop for a period of seconds, minutes or even hours, which I then have to manually disable the ethernet connection and switch to the wireless provider, a tedious task..
I was wondering if there is a way whereby i can set the ethernet conection to automically switch to the wireless connection during the periods explained above?
Thanks for your assictance.
David

OK, thanks for the update.
Let's try to figure out which device is actually providing the PPPoE service. It will be either your modem or the AirPort Extreme router.
Normally, the PPPoE connection service is established on the modem by using a web page for configuration. If you have setup the PPPoE service this way, then the AirPort Extreme must be set to Connect Using -- Ethernet.
Please use your computer to check some settings as follows:
Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup > Click the Internet icon
Look for the Connect Using setting near the top of the page
It will be set to either "Ethernet" or "PPPoE"
Which setting do you see?
Note...if you are still using OS 10.4.x as you indicate, this may not be the path to find the setup information. It may be in an older application on your computer called AirPort Admin Utility.
Sorry, I can't remember much about 10.4.x, so you may need to look around a bit on your computer.
Message was edited by: Bob Timmons

Switching over from ABAP to SAP FICO: Good / Bad ?

Hi Experts,
I have worked as an ABAP developer for an year . Now I have an oppurtunity to cross train and become an SAP FICO Consultant,
Do you people think its a good switch? Considering the fact that an MBA in Finance is what I have in mind some years down the lane? so whether SAP FICO would give me some value for that MBA ?is it a true story?
Please give me an insight, as I am in two minds and confused.
Regards,
Kenzene

Hi,
First of All be happy for being an ABAP Consultant. As you aware that entire R/3 works on ABAP language. Its always good to work in ABAP.
If you really get an opportunity to work in SAP FI/Co, don't loose this opportunity. It's also a wonderful module.
MBA Finance+SAP FICO - A very nice Combination
Being a FI/Co Consultant, you should have a great command on Finance topics....
Regards,
Suman

Steps needed to switch over from port 389 to 636 for LDAP server

Hi ,
we need to switch to new LDAP server with port 636.
current server is being eol'd and port 389 doesnt work on the new server
server : sunone web server 6.1
i have installed the ca certificates and also tesed that port 636 is open .
what are the config changes needed to be done.. It is a simple ACLl based access control application
Thanks
Naresh

What are the errors printed by the server when it's trying to connect to the
DBMS? Have you configured the DBMS for 'mixed-mode' connection? (ie:
allowing the plain TCP socket listener that the driver wil need).
Joe Weinstein at Oracle

Switching over from Extended Classic to Classic Scenario

Similar Messages

Maybe you are looking for