Switching the x-fi fatal1ty card from an XP system to a vista 64 bit sys

I just recently purchased a new computer system that has vista 64 bit. I want to use my x-fi fatalty sound card in this new system. The card use to be in an old XP system (home edition). I can't seem to be able to download any drivers for it from the creative website. It gives me the message that there are no new updates. I also tried to select other operating systems and I got the same message. Can anyone tell what I need to do to download drivers to run this thing on my vista 64 bit system?
ZX-man

I went to the link you sent me and the creative web page says that windows vista I emailed creative and they responded back with the link to download the x-fi fatality pro drivers for vista 64 (not sure why I couldn't find from their website it on my own). Here it is:
http://us.creative.com/support/downl...B_2_5_0006.exe
So far it seems to be working. I've listened to internet music and it sounds the same as my previous xp system. I still have to test it in gaming. You do not get the fancy gui though. you have to order a vista install. CD for that. However, you still get a console application that lets you set everything you normally would with the fancy gui. You can get the vista install. CD free (+shipping ~$5) from creative. The link to order that is below. Good luck.
http://us.creative.com/products/prod...ubcategory=677
is currently not supported.

Similar Messages

How to look at the delta (daily load) records from R/3 system to BW master

How to look at the delta (daily load) records from R/3 system to BW master on a particular date, let us say,
today delta happened from R/3 to 0vendor in BW , how to view what are all the records came to BW - 0vendor (from R/3) in today's delta.
Regards
Siva

Hi,
youi can see the data in the PSA.
Just go to the request in monitor tab and in the monitor and in the left top click on the PSA button.
In the nest window give the selection on the number of records you want to see from that if you want to see all the records give the number which get laoded in that request.
this will show you the data loaded in that request.
Hope it clears
thanks

CS4 on Vista 64-Bit Sys with a BMD Card

Installed CS4 on Vista 64-Bit sys with a BMD HD card.
However, CS4 does not see the BMD presets, etc., so the only options I have are those Adobe includes with CS4. I uninstalled the BMD drives, etc. and reinstalled a number of times. The BMD presets are not installed in CS4's "settings" folder or anywhere else.
It may be that the current BMD driver is not CS4-capable, because I manually placed the BMD presets in the CS4 settings folder, and they weren't "seen."
Any thoughts from those folks running a BMD card?
Thanks,
Bill Buchanan

Albert, there are no BMD drivers for CS4 aviable yet. You must wait for new drivers from BMD.
/Roger

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

Is there an error message when you try to launch the iTunesSetup.exe (or iTunes64Setup.exe)? If so, what does it say? (Precise text, please.)

Switching off a T420s nVidia card from linux ? What ACPI call ?

Dear all,
I am the very happy owner of a T420s that I mostly use under Linux. Is there any simple way to switch off the nVidia card under Linux (i.e. without deactivating it in the BIOS) ?
The script proposed on https://launchpad.net/~hybrid-graphics-linux does terminate with "success", but does not switch the card off (it however deactivate the USB mouse ...)
As far as I understand, there is a magic string to write in /proc/acpi (when the module acpi_call is loaded) to do the trick, but so far I could not find it anywhere.
I suspect that Lenovo's engineers could tell what is the said string in 5min ...
Regards,
Francois

I finally found a script to do this. More details on my web page http://www.idiap.ch/~fleuret/glitches.html

Can I use the same GSM sim card from my 4s with the iphone 5?

I'm from the Bahamas and I wanted to know if I can still use my same GSM sim card in the new iphone 5, do the iphone 5 GSM sim cards have to get cut smaller like they did with the iphone 4s sim cards???

If there is no other option, you can cut the old SIM and rub it down to make it thinner, but be prepared for it not to work and the SIM ruined..
http://www.cultofmac.com/191128/yes-you-can-cut-your-micro-sim-down-into-a-nano- sim-for-your-iphone-5/

K8N Neo2 Plat : how to switch the provided PCI Wifi card to access point mode ?

in digicell, I can't click on "access point mode"...
do some people have succeeded in turing the neo2 plat 54g into an access point ? If yes, how ?
thks

I also have downloaded the latest driver from the manufacturer of that wifi special card (code 2500 something if I remember well)
have you found any way to configure it to access point mode, else than with DigiCell ?
I think I will reinstall DigiCell one more time and reinstall it, I'm almost sure the problem is in it ;-)
I already has problems seeing my Acrobat Suite and tells me I don't have the Reader, it already opens IE in stead of the default browser [but it's supposed to be that way, according toi MSI], and it didn't detect CoreCenter I ghad installed previously, until I reinstalled CoreCenter over itself ;-)
What a nice tool :D

QuickCluster keeps vanishing with Compressor 4 and none of the solutions work, even booting from a clean system disk

I have a 2009 8-core MacPro with 16gb of RAM. QuickCluster started to disappear about three months ago. Apple support suggested that I log in as a new user and that worked for a while but the QuickCluster disappeared again. I decided to create a new system boot disk with nothing but 10.7.3 and FCPX and Compressor on it, nothing from my previous user settings. That worked for about two weeks and then the QuickCluster disappear as well. I updated Compressor last week and remarkably the QuickCluster returned....until today. Now I am back to using Adobe Media Encoder for fast encodes and I am not happy. Sure it's fast but Compressor is a much better program.
Before you suggest it: I have used Compressor remover, and Compressor fix from Digital Rebellion - no change. I have trashed library files according to Apple's support pages - no change. Permission repair - nothing. There must be something that is not in the typical pathways that Qmaster uses that is getting corrupted. Any suggestions?

Thanks for helping. A screen shot of something that isn't there might not be helpful. Let me see if I can describe the problem better.
Upon opening the Qmaster menu, I have the option to enable QuickCluster which I can do. Then the oddities start: first I get a system administrator password window which never happened before. I am logged in as an administrator and QuickCluster before always just enabled. I enter my password and close the Qmaster window however when I submit a batch, the QuickCluster option isn't there. Sometimes the computer isn't there either! (When that happens I have to trash the Qmaster library files or no rendering at all.) When closing Compressor, the system password window comes up again and if I don't enter it Compressor will not quit. Upon reopening Compressor, after the window asking if I want to enable shared services is clicked yes, the system password window comes up. If I cancel it then the QuickCluster is not enabled and Compressor behaves normally without any more requests for the system password. If I enter the password, the QuickCluster doesn't appear in the submit window and there's a chance the computer won't either.
This has occured the same way when the computer is booted off my normal system drive or the clean system boot disk that has none of my personalizations.
- William

Where can I find the direct download for Flash Player 11.2.202.228 for Vista 32 bit?

I use to be able to get the direct link like for the previous version 11.1
But when I look I do not see that anymore for the newest version (11.2.202.228)

We typically recommend that you grab the latest version from get.adobe.com/flashplayer. However, if you need stand alone installers you can either download from here:
Install in a firewall proxy server environment
or you can get a zip of all of the players here:
Archived Flash Player versions
Chris

Where can I get the direct download for flash player 11.2.202.233 for Vista 32 bit?

I will uninstall the previous flas player 11.2.202.228 and do a clean fresh install.

Your waisting your time, still does the same as 228, not fixed anything on video viewing side of things, i still get pauses after each frame on some sights right to the end, but before 11.2 i was fine, still get green screens, popping sound, degrading picture when i move the slider at the bottom, still picture but sound still carries on, ive tried 11.2 on all nvidia drivers, its the same. Ive had to cancel subscriptions becazuse the player doesnt work with there sights, i just get a smooth running picture untill the next frame then it stops and starts after each damn frame, so annoying, if it was my OS then the previous player to 11.2 wouldnt work either, the beta was exactly the same.

How do I get the details of my graphics and sound card from my computer.

With out sound like an idiot I need the details of the graphics and sound card from my HP t 480 uk, how do I do this. LJS.

After some digging, I was able to turn up this...
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00127607/c00127607.pdf
Your motherboard specs are listed here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00064822&lc=en&dlc=en&cc=us&product=397594
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

HT4589 How do I change the audio to dual mono from stereo when using Share to DVD in Final Cut 10.1?

How do I switch the audio to Dual Mono from Stereo when using Share in Final Cut Pro 10.1? Even though the audio is all in dual mono in the timeline, it lists it as stereo in the share box.

Hi rationale1,
Welcome to the Support Communities!
The share to DVD settings in Final Cut Pro X use the Dolby Digital settings which are stereo for DVDs. So this can’t be done directly in Final Cut Pro X.
The link below will explain the Dolby Digital parameters and options in Compressor 4. You may need to research a different DVD authoring software to achieve your desired result.
Dolby Digital - Compressor 4 User Manual
http://help.apple.com/compressor/mac/4.1/#cpsrb71736a2
Dolby Digital
The built-in Dolby Digital settings (in the Create Blu-ray and Create DVD destinations, as well as the built-in AC-3 and EC-3 audio settings) use the Dolby Digital transcoding format. This format encodes Dolby Digital (AC-3) and Dolby Digital Plus (EC-3) audio files that contain multiple audio channels, including 5.1 surround sound. You can also create custom settings that use the Dolby Digital transcoding format.
Note: All files intended for video and audio DVD authoring must have a 48 kHz sample rate as required by the DVD specification.
DVD Video: Choose this option if you’re encoding for use in a DVD video authoring application.
DVD Audio: Choose this option if you’re encoding for use in a DVD audio authoring application.
Tip: For stereo encoding, rates of 192 kbps and 224 kbps are typical and will produce good results. For Dolby Digital 5.1 encoding, a rate of 384 kbps is recommended. For 5.1 Dolby Digital Plus encoding, a rate of 192 kbps is recommended.
Cheers,
Judy

When I switch the email account the signature is not swithed

I use several diferent email accounts with Thunderbird. I want the signature to switch once I change the account I'm answering from. Yesterday Thunderbird asked me how it should behave when I switch the account I'm answering from. I said 'remember my answer' and than pressed the wrong button. How can I undo this (without reseting all my settings)

Ok. I seems I did not explain very well. I do not use any add-ons
1) I use several diferent email account - each one configured with a specific signature / f.i. [email protected] / [email protected]
2) Sometimes I receive an email in [email protected] but I want to answer from [email protected] so the conversation goes on with me - instead of entering into general...
3) When I switch between the account I'm answering from (general-->myname) the signature should switch also from general --> myname.
4) This generaly worked but last time I did this Thunderbird asked me how it should behave --> if it should stick with the original signature from the original account I received the email (general) - OR - if it should switch to the signature of the account I just selected (myname)
I checked "remember my answer" and than hit the button that means DONT CHANGE SIGNATURE IF YOU CHANGE EMAIL ACCOUNTS.
Thats what I'm trying to undo.
Thanks for any help.

Recent News on How to upgrade the 802.11g Wireless Card to a 802.11n Card

Hi everyone!
I have a macbook Core Duo (not core 2 duo) and I want to buy the new airport express. I was really upset to see that I will not gete the performance upgrade of the n technology on my new computer. Finnaly I saw this post on AppleInsider
http://www.appleinsider.com/article.php?id=2510
It says that you can replace the wireless card in the Macbook with a card from the Mac Pro (the same size and same amount of antenas) and the n technology would work (and increase speed and performance).
Here is how to do it:
http://www.hardmac.com/articles/71/
Has anyone done this yet? Does it work? Is there a violation of Applecare by doing this? Where would you get a n airport card for the MacPro?
Any ideas on this subject would be great!
If it is true and leagl, then I would be very happy.
Message was edited by: AlwaysApple

As to your question about a 'violation of Applecare...' it was already answered in your first link...
"A quick warranty-voiding disassembly later..."
Macbook 1.8-) Mac OS X (10.4.8) Week 38 base model w/1G Ram

X-Fi XtremeMusic and Digital I/O card from SB Live! (CT46

Hi!
Can I safely plug in the Digital I/O card (from old SB Li've!) to my new SB X-Fi XtremeMusic? Is there any compatibility problem and some On-Card connectors may not work?
For reference here is a real foto of this I/O card:
http://img22.imageshack.us/img22/4332/ct4620iocard8xy.jpg
Any help will be appreciate.
Best regards,
Palmer

Yes.
The header (AD_EXT) on the X-Fi card is not the same pin specification as the SBLi've card.
Cat

Switching the x-fi fatal1ty card from an XP system to a vista 64 bit sys

Similar Messages

Maybe you are looking for