Switching to Arrange view, Logic 8.0.2 keeps crashing

Hi,
I have a very annoying problem: I use Logic for film scoring. Since I updated to 8.0.2, Logic quits every time I switch from the video window to Arrange, which happens quite often. This makes any kind of serious work almost impossible. Does anyone here have the same problem and perhaps a solution?
Thanks,
R.

Yes, exactly!
Video screen is on 7 and Arrange on 1 - this switch crashes it.
8.0.1 doesn't, but then you get the annoying "My name is Logic 8.0.1 and I can't remember that you had a video screen on Screenset 7" syndrom. But still better than the crash.
Do you have a workaround?

Similar Messages

Iam a firefox user but suddenly my computer crashed watching youtube I loaded everything back up when I go to watch yt videos again it restarts my computer everything else works So i reinstalled firefox tried viewing videos but my computer keeps crashing

eventually I want back to internet Explorer and tried to watch youtube videos and others videos and it works perfectly fine. what is the issue?

yeah dude ! same happened with me before but now it's been solved out with upgrading to latest version of Flash player so you have to make sure that you using latest version as well :(
<i>[link(s) removed by Moderator]</i>

How can I keep my regions organized for arranging in Logic 9?

I just finished getting all of the loops/tracks I need for my dub tune, and it's time to arrange it. My arrange view is full of scattered puzzle pieces. The tracks and regions are named to help stay organized. I start the tune on measure 16 so that I can stuff all my regions in the first 16 bars and then option-drag or copy paste into the arrangement as needed. This requires tedious scrolling back to the beginning to grab regions, though. I guess the audio bin is an option, but mine is full of all these extra items that clutter it up and that I'm afraid to delete. Also, there is no bin to keep MIDI regions in. Ideally, I would like a bin with only audio and MIDI regions that I want to use for the song and only one of each (some of the files in the audio bin are copies of the same and are labeled bongo.1, bongo.2, bongo3, etc.) And some files in the audio bin don't sound when I preview them. Any insight to my problem would be greatly appreciated.
Thanks

Thanks for the suggestions, guys. I have briefly played around with the screensets. I was hoping I could keep all my regions/loops in bars 1-35 or so and start my new version at bar 200, then get my zoom levels and playhead position just how I wanted it for both. Then copy and paste regions from the beginning to bar 200+. This didn't work out so well because;
A. Regions are not pasting where I want them to, and
B. I must not fully understand how screensets work yet because they are not locking the things needed to make jumping back and forth easy (namely, playhead position)
I read the screensets chapter of the manual, and got no more clarity. Also read the folders section and that was also a bit vague. I'm going to revisit my Logic Pro Training books, folders and screenset sections, and see if that helps. Then I will attempt to follow your ideas as closely as I can and see what happens. SeanE. Man, I'm a little confused by the second half of your reply, but making Apple Loops might just be the ticket right there. I wasn't real thrilled with making loops just to add them to a sea of loops, but you're right. If you add the project name with them, I, in theory, should be able to have all my instrument and audio loops right there all neat and tidy if I search the project name. I will report pack with my results. Thanks again everyone!

Switching from one View to another in the Portal

Hi Experts,
We have created many global views from one query. We have created these in thr portal.
Our problem is when we switch from one view to another, it will carry all the filter values from the previous view. Ideally we only want to pass the values from the variable entry, not the filter values local to the view.
Does anyone of you knows how to solve this problem? I am trying to look at the Customer exit... and do something with the mapping. But this one will affect all the drill-downs. Any thoughts?
Best Regards,
Rose

Hi,
I have somehow solved it using the exit. In this case the source and target query is really the same because we are just switching from one view to another using the the same query. What I did in the exit was:
- If the source and target query are the same.
- remove all the mappings except the ones with object types "Variables".
This ensures that:
1) I only apply this logic if the source and destination query is the same.
2) The restrictions that will be applied to the destination view when I switch
from one view to another will always be only be the paramater values
(default or entered by the user) when they first run the query.
Best Regards,
Rose

Dreamweaver CC crashes when switching from code view to design view

I am experiencing a recent problem with a file I am currently working. When I switch from code view to design view Dreamweaver crashes and requests a shut down. Other files seem to work without a problem. This particular files has 3 cascading EdgeAnimation CC files that are selected by media queries. I can test the page online without a problem but not in design or live view.

Since your new page didn't crash, this leads me to believe that you have some critical errors and/or conflicts in your other page(s).
Try running your code through the W3C validation tools.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Also debug JavaScript.
JavaScript - http://www.jslint.com/
Nancy O.

How to get back to regular arrange view after double clicking on a rex file

Hi. How do I get back to the regular arrange view where I can see all of my tracks in the arrange window. I had double clicked on one of the tracks which was a rex file. I wanted to see what the slices looked like. Doing so just brought me to a new arrange looking window with the one rex file track as the only track. And now I can't get back.
PBG412" Mac OS X (10.4.5)

Double Click on the arrange background
J

In Flash Builder: "No Disk" Error when trying to switch to Design View

Just had Flash Builder Beta 1 uninstalled and Beta 2 installed instead.
When I try to switch to Design View or open a link from Start Page in Flash Builder Beta 2, the application freezes and "No Disk" error message pops up.

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

Numbers app won't switch to landscape view - ipod touch

The numbers app does not seem to be able to switch to landscape view on the ipod touch.
Is there someway to get it to run in horizontal mode?

It seems like it ought to be, I'm very dissapointed that this app won't do this.

IPad won't switch to landscape view

I updated my software on my iPad and now it won't switch to landscape view and it is not locked. I have restarted it and cleared my memory and checked every setting that I can think of. What now?

By restart do you mean a reset ? If there isn't a lock symbol at the top of the screen next to the battery indicator then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Is there is a lock symbol then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

How do I switch to Compatibilty View as I could with Internet Explorer?

I'm not able to open programs for my work because the message reads "Sorry, your browser/program is not supported by Web Dynpro! ". When I was using Internet Explorer & saw this message, I was able to switch to "Compatibity View" which corrected the problem. I'm not sure how to correct it with Firefox.....

It is not the first time that issues with Web Dynpro are reported on this forum and you may not be able to fix this.
*http://en.wikipedia.org/wiki/Web_Dynpro

SharePoint Online switching to mobile view when attempting to add user permissions

Hello,
I am having a very weird problem that just started out of no where. It happens when I go to the Site Settings of my site collection and click on Site Permissions. When I click Grant Permissions to try to add users, the browser will immediately switch to
the mobile view.
I am able to switch back to the regular browser view, then when I click Grant Permissions, the box to select the user opens. I then choose the user and click Share. After clicking Share, the popup immediately goes to the mobile view. When I exit that the
users were never granted permissions.
This only happens so far when I am trying to add permissions. Is there something that I could have messed up?
What is happening and how can I fix this? I am out of ideas and unable to add permissions for users. I do not want to have to blow this site collection away.
Thanks.

Hi Andy,
According to your description, my understanding is that the page would switch to mobile view when attempting to add user permissions in SharePoint Online.
I recommend to verify the things below:
Clear the caches in browser to see if the issue still occurs.
Test the same scenario in another computer to see if the issue still occurs.
Append mobile=0 to the URLs in SharePoint Online.
In the meanwhile, you can post your question to the forum for SharePoint Online: http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicessharepoint.
More experts will assist you, then you will get more information relation to SharePoint Online.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How To Force User to Fulfill validations in view before switch to another view in infopath 2012

i have a form with different views
,, every view has some validations ,, how to validate each view's validations before switching to another view
if manual how to do that ?

Hi Ahmed,
You can use custom validation for verifying all the fields with required data, and write rule in you submit button to disable till all the fields are entered with valid data. Enabling submit or switch view rule after validation will help you on this regards.
You can also use internal flags for enabling disabling submit button if required, or just make all the fields required OOTB.,
I usuall use expressions to validate the form for values, this will help to check multiple fields atonce.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/39160c15-2074-4f27-b9bc-5b0a20d2d29e/validate-30-fields-on-infopath-form-before-swiching-view-or-submit-form-data
here are some links for reference,
http://office.microsoft.com/en-us/infopath-help/introduction-to-rules-HA010381865.aspx
http://office.microsoft.com/en-us/infopath-help/add-rules-for-validation-HA101783369.aspx
http://sharepoint-mattharmon.blogspot.com/2013/03/conditional-validation-rules-infopath.html
http://www.bizsupportonline.net/infopath2007/infopath-basics-3-ways-validate-data-infopath.htm
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Milky / Cloudy ghosted view & can't switch to story view

I do layout work on a magazine and export stories for the editor using a Dropbox Incopy workflow. I use Indesign CS6 and the editor uses Incopy CS6.
The editor was complaining that when she opened the files, everything looks "milky" or "cloudy" and it takes forever to open and crashes a lot upon opening. I have a Creative Cloud subscription but it doesn't include InCopy, so I downloaded a demo and tried opening our Indesign file and here's what I've noticed:
When my application default is set to Story view, I have the same problem my editor describes. There is only one tab, and it says Story view, even though what I'm seeing is Layout view. Everything has is covered in transparent white but if you change to preview mode, it goes away and you can see the document correctly.
If I change my app preference to Layout view (with no docs open) and then open the Indesign file, it opens correctly in Layout view with the 3 tabs for the 3 views. And it looks right in Standard mode. However, if I try to select Galley view, it takes a really long time to switch (spinning beach ball) but it does work eventually. If I select a small story and check it out, then try to switch to Story view, it just hangs and I have to force quit.
This is a 64-page journal that is mostly text. All of the Incopy stories are exported to the Links folder in the dropbox, and the Links folder is on the same level as the Indesign file. We are opening the Indesign file via Incopy; we don't use assignments.
Is this a known software problem, or perhaps a plugin incompatibility? My editor obviously has the same problem and is using an older mac than I am.
I'm using InCopy CS6 version 8.0.1.
My Mac is about 3 weeks old - it's a quad-core MacBook Pro 15 inch Retina display with 16 GB of RAM.

Anne Marie Concepcion was kind enough to look at my files, and correctly identified the problem. The problem was that we had a LOT of tracked changes in all of the stories, and it was a 64-page document with lots of stories in it. So, there were thousands of tracked changes that were just too much for Incopy to parse.
We were using tracked changes but not checking and accepting them. I didn't realize this was necessary; I thought it was just as a backup in case we wondered who changed something and when.
As Anne Marie suggested, I opened the Indesign file, checked out all the stories, and accepted all the tracked changes. Going forward, I need to make sure I accept the tracked changes from time to time, to clear out the backlog.
I reopened the file from InCopy and it worked fine; I could access all 3 views and it displayed properly. So, if anyone else has the same problem I had, try accepting your tracked changes.

HT4623 iPhone doesn't switch to horizontal view when turned.

My phone remains in the standard vertical view mode and even when turned never switches to horizontal view.

Very simple,
Press your home button twice.
Swipe the bar to the left.
Set the potrait orientation lock/unlock.

What is the best approach for doing view logic?

Hi, I have a jsp page that receives an array of strings and a set of strings from a servlet. The set contain elements of the array. The page must print all the array values and which values are contained in the set. My first implementation just construct a checkbox for each array value using jstl c:forEach. To determine if they are checked or not I use some scriptlet. Without using scriptlet, the servlet would need to help by providing a new type of data. Also, if I needed to sort in ascending order the checkboxes, then I would need to use scriptlet, or the servlet would need to do the ordering before passing the array. Using the servlet to prepare the data, if the view now need to change ordering to descending, then I should change the servlet.
My doubt is, when doing view logic, what is better, to spread it into view and servlet, or to leave it in view only? I know the recommendation is to not use scriptlet in views, but jstl alone sometimes doesnt provide the needed support for constructing views

Write your own custom tags to handle to cases where JSTL alone is not sufficient. Also, you may use expression language (EL) and have custom EL functions. Avoid writing scriptlet in JSP and instead of writing view processing logic in servlets use custom tag handler or EL functions to handle UI display logic.
Thanks,
Mrityunjoy

Switching to Arrange view, Logic 8.0.2 keeps crashing

Similar Messages

Maybe you are looking for