Switching Tracks;Disable Record Mode

Is there a way to disable the automatic recording mode that happens when you switch tracks.When i'm cleaning up tracks and going between them with my monitors on,the red recording mode button turns on and feedback occurs when the built-in mics kick on.Thank you.

That's something for the "things I'd like to see changed" list.
It never made sense to me since it seems to me that you choose a Track for recording only once or a few times, whereas you choose it for mixing, etc. many, many times and then always have to disarm it so there are no accidents.

Similar Messages

Creating new tracks when recording in Cycle (loop) mode

I'm having an issue when recording in cycle mode.. I'm able to record (in seperate tracks) in cycle mode. however I can only play the first take (first track) I recorded, however all the subsequent tracks that were recorded do not play. Even when I try 'soloing' them they still don't play. You can see in the arrange window that audio data was recorded on those tracks however they have a "faded" effect to them. They're also not muted. Am I missing a setting?

The issue you describe when recording in cycle mode was a huge frustration for me until I discovered that I was not aware of a simple principle that made all of the difference... I am wondering if the following explanation may be part of the problem that you are experiencing.
The principle is that muting a region, muting a track, and muting an audio channel are three distinct and separate functions. Until I got my head around that principle, I continued experiencing the same frustration that you are having with recording in cycle mode.
Recording in cycle mode results in muting the regions below the last take at the top. When trying to unmute the "tracks" below the top region to listen to the other takes, hitting the mute button results in ALL of the "tracks" either being muted or unmuted, yet the separate regions below are still muted!
The key is to unmute the REGION that you want to listen to (and not the track or the channel). The way to do this is to hit the escape key to bring up a local tool box menu wherever your cursor is... then click on the mute tool which changes the cursor into a mute tool, then click on whatever regions you want to unmute...
Hopefully the above will help.
Power Mac G5 Mac OS X (10.4.8)

Is it possible to lock an audio track in "record enabled" mode?

Here's how i write... i set up a drum loop to play for around 20 minutes, then I rec-enable one audio track to record vocals, and then finally, I skip around among hundreds of different midi tracks.
I just hit the down arrow button, and scroll through dozens and dozens of midi tracks. I quickly hit the keyboard to listen to the sounds. If i like a particular sound, i just want to hit record, and instantly record my vocals along with the midi performance.
Unfortunately, when i hit record, the vocal/audio track doesn't record. Right at the moment when i find an inspiring sound and hit record, the vocals just don't record.
I'm forced to scroll miles up the arrange window, to find
the vocal audio track. It's still blinking the red "rec" button, but this is misleading. It's not actually record enabled. I have to hold down shift, hit it once to turn it off, then hit it again to re-activate record function.
Only then can i record the midi AND vocals.
What I want and need is sooooooo simple to offer as a function, yet totally ruinous to my creative flow if it's not possible. (I used to do this easily on the far inferior
Cubase VST 5.1, OS 9)
Is there a way to record enable an audio track, so that,
until I specifically disable the record function, it's
ALWAYS ready to record the second I hit the record button?
Even after I've been hitting the down arrow to audition
various midi channels?
MacPro 3ghz, 8 gig RAM, 3 raptor drives Mac OS X (10.4.10) Logic 7.2.3, Kontakt 2 soft-sampler, RME 400

I tried to build screensets like you suggested. If I could
get this to work, I think it would be a great solution, but
I'm having serious problems.
I opened a separate mixer, with just the single vocal/audio
track showing.
Then I opened the main mixer, which has all the faders.
If I record-enable a midi track, and then hit the record-enable button on the audio track, the midi track becomes un-enabled. Incredibly frustrating.
The only way I've been able to do it has been to record-enable the vocal track, and then start recording.
Only if Logic is actually recording, can i then record-enable the midi track without deactivating the audio
track.
A big problem is, that when i click to record enable the
vocal track, the arrange window jumps all the way up to the
top, where the audio track is. THen i'm forced to travel
down, to re-find the midi track.
You mentioned in your post that the mixer needs to be
"unlinked". HOw is this done? Will it be possible for
me to click on the record-enable button on the mixer's audio track without the arrange window jumping to that track?

Taking stack tracks out of record mode, while transport moving

Is there a way to stack 10 tracks, one record button triggering them all, three other tracks out of the stack and then the record button for the stacked (one button) 10 tracks button being un-engaged, while the transport is moving leaving the other three tracks recording? All without stopping the transport?

Hi user13118647,
It looks like your application is triggering an existing Sun HotSpot VM bug from the older 1.4.2_11 JDK.
Please review the Sun bug references below.
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6405062
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6385867
The problem appears to be resolved in JDK 1.4.2_13(b01). You may want to download and attempt to replicate with this service pack upgrade.
Another potential problem I noticed is at your classpath level. It looks like you are using a mix of runtime JDK jar files from the Sun JDK and JRockit. Please ensure your JDK classpath; including any reference to any JDK related runtime jar files (tools.jar, rt.jar etc.) is consistent and unique e.g. Sun HotSpot or Oracle JRockit but not both.
## Example:
JAVA_HOME=C:\bea\jdk142_11 // JDK home is setup to the Sun JDK
CLASSPATH=C:\bea\JROCKI~1\lib\tools.jar; // tools.jar is loaded from the JRockit JDK home
Regards,
P-H
http://javaeesupportpatterns.blogspot.com/

Record mode - some doubts

Good morning … bom dia …
I have some doubts about RECORDMODE … follow ...
Is it necessary development some ABAP code in transformation ? … or in Initial / Final routine ?
In DTP from DSO to Cube, is mandatory choice the option “change log” ? Or make some filter to select only valid records ?
Is There some configuration on query ?
Or the goal is only know how recordmode works, based on the table ROOSOURCE ?
Thanks in advantage …. Obrigado …
Kokeny, Marcio
P.S.: I already read this some documents:
http://scn.sap.com/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
(How does a datasource communicates "DELTA" with BW?)
http://scn.sap.com/docs/DOC-54330
(Recordmode Importance in SAP BI along with Delta Handling)
http://scn.sap.com/docs/DOC-29927
(Record mode Concept in SAP BI)
- Record Mode Concept in Delta Management
- 0RECORDMODE and Delta type Concepts in Delta Management

Hi,
Is it necessary development some ABAP code in transformation ? … or in Initial / Final routine ?
Why you got above doubt?
Routines are used as per needs. Not based on 0recordmode.
In DTP from DSO to Cube, is mandatory choice the option “change log” ? Or make some filter to select only valid records ?
Not mandatory. if we run first time dtp with delta mode option then no need to select change log option.
if we perform dtp as init and later delta then we need to choose changlog option for delta.
Is There some configuration on query ?
No. 0RECORDMODE is upto DSO level only to track changes.
Or the goal is only know how recordmode works, based on the table ROOSOURCE ?
0record mode works based on data source delta type.
Data source delta type you cam see from table ROOSOURCE and field deltyp - ABB.ABD.AIE...etc.
Thanks

Soundtrack Pro pops out of record mode after 1 second - Help!

I have an ADR session tomorrow, so this one is pretty urgent. I have Soundtrack Pro 2.02 on my PPC G5 and I've used it to record vocal tracks for a long time, but I haven't used it a couple months. I started it tonight to do a couple test takes and hit the record button and it records for about 1 second then pops out of record mode. The playhead, however, continues to run. So it's not that it stops altogether, it just quits recording.
Nothing new in terms of hardware, same preamps, same mic. No new software that I can think of, just the standard updates. Searched the and found the same question asked a earlier this year but was never answered ( http://discussions.apple.com/thread.jspa?threadID=1382762&tstart=6 ). I hope someone knows what's going on. Thanks much.

UPDATE:
I did a complete re-install of FCS and it's working now.

How to view score of one track while recording another.

I want to record audio on one track. I want to read the notes and chords from another track while recording. ( I want to use the previously recorded track only for providing me with the score ) I would very much prefer to have Logic chase the score so that I know where I am in the arrangement while recording.
I am aware I can print out the score as a a pdf file and view that, and its not so bad, however I would prefer Logic to follow along the score and let the playhead indicate the location.
I can do this when not recording. I can view the previous track just before I go into recording, but when I go into recording, the score switches to showing currently track being recorded ( which is empty)

Hi there,
Floating Windows all but disappeared with Logic 8 and many of us mourn their passing. Although some windows are, by default, floating (eg transport), the only one that you can choose to make float nowadays is the Environment, useful if you're setting up faders or some other real-time control.
Pete

Zen V Plus stuck in microphone/recording mode HE

HiMy brand new Zen V Plus is stuck in microphone/recording mode. I've tried holding the back button (which is what you're stupposed to do for more options) but then it just starts recording. AFter I end the recording, I'm back in microphone mode again and can't get out. I've already tried turning on/off and resetting - nothing hel
ps.
Please help if you can!ThanksDucky

I'm also having this problem and would have tremendous appreciation for anyone who could offer a solution. My Zen V Plus worked well for about three months before this problem arose, and I really enjoyed having it, so it's very dissapointing to me that it's not working anymore.
The behavior: as soon as the player is turned on, it goes into locked mode, regardless of the position of the lock toggle switch. If I toggle the lock switch, it either wakes up and then immediately goes back into locked mode or simply doesn't respond. If I'm lucky, I can get it to actually unlock by toggling the switch many times in a row, but then it will return to locked mode after a few seconds.
A few more details: I have tried doing a hard reset. I am not having any trouble syncing the player to my computer. Also, this problem creeped up slowly: it started just happening once in a while, but now it happens every time I use the player.
Thank you in advance to anyone who can help.

Custom recording mode in captivate

Captivate has demo, training simulation and assessment
simulation recording modes. It also has a custom mode. What is it
for and How to use it? Does anyone know?

Hi there prabu77
Each of the three modes configures presets.
For example:
* Demonstration mode configures the recording process to add
Text Captions, Highlight Boxes and track Mouse Movement.
* Assessment Simulation configures the recording process to
add Click Boxes with Failure Captions and Text Entry Boxes with
Failure Captions
* Training Simulation configures the recording process to add
Click Boxes with Failure and Hint Captions and Text Entry Boxes
with Failure and Hint Captions
* Custom mode allows you to choose the options that will be
in effect. Maybe you want some combination of elements that the
other modes don't offer.
Hopefully that explained it for you... Rick

Player Error: "You cannot record without enabling at least one track for recording"

So I'm trying to adjust my audio using the track mixer in premiere pro cc. I assigned 2 clips to a submix. When I tried to record, I got the following error: "You cannot record without enabling at least one track for recording." I disabled other tracks, then re enabled them all, muted them all, but still got the same error when I tried to record.

This is how I have just made a recording:
Select track to record (1), Select record (2) then press play to record.
Use the in-out markers in the program monitor to select the area to record.

The color of the web site looks wrong when switched to full screen mode.

I was in a game website.
When I switched to full screen mode, the black text changed into blue text.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
* [[Troubleshooting extensions and themes]]

Recording modes

First I understand the imediate answer will be shoot and look for your self but I am interested for other peoples experience. I have a Sony DCR-SR82 and in order to end up with decent movies should which mode is the best HQ or SP? What are the pros and cons? I am aware of the larger storage on HQ but with 60 gig it should not be a problem. jim_joh2

Karsten, when I said pro or con I was referring to the recording modes and not the camera. My question was only directed to the shooting modes and was hoping for other peoples opinion. I am curious now that you brought the subject up is your dislike of harddrive camcorders from owning one and if it is we could benifit from your experience if you would be so kind to share the details. I have the minitape Canon also which to me is a pain in the neck fooling around with the tapes and having to keep switching so I am so far very happy with the Sony harddrive. jim_joh2

HV20 Camcorder Camera/Record Mode shows intermittent black & white fuzzy screen

I rarely use this camcorder since owning it and most of the time it's stored in its camcorder bag until the next big special event (e.g. a wedding). It is very well taken care of and looks like new. One day I took it out to check on and playing back recorded videos on the minidv tapes were fine, clear and perfect. However, once I switch the mode to Camera/Recording mode, the screen changes to a fuzzy black & white screen, then fades into another black & white screen, then fades into a perfect color screen, and then back to fuzzy black & white screen again. The screen continually cycles like this nonstop. I tried recording a random video (see attached youtube video link: http://youtu.be/akR8OGsIEaY) to see if playing it back would be perfect and the playback video was exactly what I recorded... fuzzy black & white screen intermittently changing in and out. I again left the camcorder in storage until today when I wanted to use it for a wedding tomorrow. I searched for troubleshooting help and many people seem to suggest a head cleaner. I found one from RadioShack and ran it through the camcorder but the Camera/Record mode is still the same. What is wrong with my camcorder? I take really good care of it and rarely use it. Do I need to send it in for repair? If so, what are the steps and process for doing so? Thank you in advance.

It may be time to send the camera in, or maybe put it to rest and think of upgrading. I only use my HV30 as an AV/DV converter now, and haved moved on to an HFM40, I bought one here at Canon, refurbed, great camera, great price.
I'll watch this thread, though, for updates. There is another forum, though, dedicated to the HV20-30-40. You might find some very interesting things there, and answers. I won't post the link here, but if you Google HV20-30-40, you'll find it.

Why is auto recording mode acting like manual recording

In Cap4 my recording mode is only capturing all screens in one screen even when I have selected auto record mode, anyone have any ideas why?

Hello,
Please, could you elaborate some more, I do not understand your question. What do you mean by 'capturing all screens in one screen'? And what did you expect Automatic recording mode to do, that you call it now behaving as Manual?
In Automatic recording mode, CP decides when to take a snapshot of the screen (because something has changed) and when to switch to Full Motion Recording because the capturing cannot be used with static slides (such as with drag and drop, moving with the mouse). In Manual recording you decide yourself when to take a snapshot (with Printscreen) and to switch to FMR recording.
My intuition tells me (can be wrong of course ) that you are supposing Automatic recording mode to be like video recording, but in CP that is called Full Motion Recording (use the video camera instead of the still camera in the toolbox of the recording setup). It is not really recommended to use this mode for whole projects, for several reasons: editing is quite a lot more difficult in FMR (and editing possibilities is a very important feature of CP) and of course the filesize will be much larger with FMR than with the 'native' modes like Automatic / Manual recording that are based on static slides.
Lilybiri

Monitoring the track being recorded

Hello all!
Audition 3 - Is there a setting that will allow me to hear the track being recorded while I am recording it? I am using headphones and using a line in jack to input the guitar signal but when I hit play or record the program mutes the recording track.
I understand why its doing that, to prevent feedback. But I am using headphones and all sound is contained in the system. So I would like to hear the guitar through the head phones what I am recording.
Thanks for your help.
Jeff

Go to the Options menu and choose Monitoring/Audition Mix. You can then choose between Smart Input which switches to Input when you drop into record or Always Input. However I should mention that depending on the speed of your PC and the type of soundcard and driver that you are using you may suffer from latency that will cause a delay between you sounding the note and you hearing it in the headphones. If you are lucky this may not be enough to stop you recording. otherwise you really need an audio interface that uses direct monitoring to get round this problem.

Switching Tracks;Disable Record Mode

Similar Messages

Maybe you are looking for