SWO1 - No destination could be determined for logical system

Hi there,
I am trying to call a remote transaction via SWO1, but I am getting the following error:
No destination could be determined for logical system TSTCLNT120
Message no. OL860
Diagnosis
You attempted to instantiate an object with the specified logical system within the distributed runtime environment. However, an RFC destination has not been defined for this logical system.
System Response
The object instance cannot be generated.
Procedure
Define the RFC destination or use the local runtime environment.
I go to SW01 --> Type an object name "TSTC" --> Click TEST --> New Dialog window Clicked on the Full key --> Entered the Logical Name for remote system (ECC), and also Entered Key: SU01 --> When I click on the continue, I am getting the above mentioned error.
I can clearly see that it is looking for mapping Destination for that Logical name. Can someone please tell me what t-code or table I need to go and map the Logical Name with a RFC destination?
Thanks in Advance
Kumar

hi
try these links
Re: R/3 Connections in RFC destination node.
Assign a logical system in RFC
Regards
Sajid

Similar Messages

ATP Check Issue - No business system could be determined for logical system

Dear all
Got an issue while executing ATP check on a planned order in product view,
with a message: "No business system could be determined for logical system"
CIF setting wise:
regular business system group maintained and assigned in place,
master data wise:
business system group info fine in product master,
Is there anywhere suggested to check under ATP setting:
category, check mode, business event, check control/check instruction?
Your kindest enlighting is appreciated,
Thank you,
mandy

Dear Mandy,
usually this error is caused by a missing customizing entry:
spro:
Integration with SAP Components
   Integration via APO Core Interface (CIF)
     Basic Settings for Creating the System Landscape
       - Maintain Business System Group
       - Assign Logical System and Queue Type :
Please read the documentation for these two transactions and create the systems.
You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO says:
To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3 system to which you want to transfer data as logical systems.
I hope this helps.
Regards,
Tibor

Could not create JCOClientConnection for logical System:

Hi,
I am facing a wierd problem in using the JCO destinations.
I created a page where it is using some JCO destinations say SAP_R3_HumanResources.
when i open the page it is working for the first time .without closing the page if i open the same page again it is giving the following error
Error connecting using JCO.Client: null
Error connecting using JCO.Client: null
Pernr:Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.swissre.CustomData. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Please let me know how to solve this issue
Thanks
Bala Duvvuri

Hi Bala,
It seems that this is a custom webdynpro application which when executed causes such problem. This might be due to JCO connection not released back to the pool.
Please refer to the following threads and that might be helpful.
Re: JCO Connection close
How to close a model object connection for Adaptive RFC?
You might have to call disconnectIfAlive method on your model.
Regards,
Jigar

Could not create JCOClientConnection for logical System: SAP_R3_HumanResour

Hi,
For all the standard ESS (sap.com) the JCo connection used is SAP_R3_HumanResources .
All the applications are working fine.
I am trying to add a test Component in one of the (sap.com~eepro) for testing a standard BAPI call for getting user details.
I have used the same Model and the same SAP_R3_HumanResources destination name.
But i get the following error when i try to execute the standard BAPI_USER_GETDetails (non - HR).The other applications for standard components (Vc ) work when i run the application.
My question here is why a custom , local webdynpro when try to make a RFC call using the running already existing JCO connection throws such error.
How could this be solved.Note the connection is running and working fine for all the ESS webdynpros!!
Error:
Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.test.hr.model.Test. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Your experience would be worthy enough.
Regards,
Swathi

Hi Swathi,
Here are some suggestions to trace down to the actual problem.
1) First check if all users are having this issue. (All other applications working and only one application giving problem)
2) If no, then take list of users having this problem and check their portal and SAP accounts
3) If yes, then concentrate on testing the JCo connections and the user account mapped in JCo settings
Possible things u can check is user's portal account (locked or not), SAP account (lock or validity), pernr mapped (validity), JCo user (check for lock), ping and test JCo connections
If none of them are issue, check the logs if there are any trace for this issue. I believe there must be certainly one. That can help u going further.
Regards,
Harini S

No value could be determined for variable (Material)

Hi,
I have Planning filter where im restricting the Material with a Zvariable. This is a Customer Exit variable. This works fine in development but throws me error No value could be determined for variable (Material) in QA system.
Could some one help me in resolving this in
Thanks

either your code is wrong or you just have no data.
debug the code, check if you do have the desired data according to your code.
regards
Cornelia

Error showing - No price could be determined for subcontracting in CK11N

Hi,
We are facing a problem in CK11N that while we are creating Material Cost Estimate with Quantity Structure, getting an error message..
No price could be determined for subcontracting
Message no. CK468
Diagnosis
The system could not calculate a price for the subcontracting because none of the valuation strategies in valuation variant 001 was successful.
System Response
If the system issues a warning message or an information message, the costing item is used in the cost estimate with a zero value.
If the system issues an error message, it sets the status "KF" (costed with errors).
If the system issues a termination message, the cost estimate cannot be processed.
Procedure
If you have authorization for Customizing, check the valuation strategy for subcontracting in valuation variant 001.
I read many thread already, but no solution is suit my requirement..
please help..

We run the transaction OPN2 and select 001- Planned valuation - mat. Valuation Variant. Db Click on it and select Subcontracting tab.
There Strategy Sequence is defined as under:
Priority......Strategy Sequence
1...............Effective price from Purchase Order
2...............Net Purchase Order price
3...............Effective price from Quotation
and in Quotation in Purchasing option, there is selected - Auto quota arrangement.
please guide.

Error Message : " No value could be determined for Customer Exit Variable "

Hello BI Experts ,
I have created a "ZYTD_PERIOD" Customer Exit Variable Interval Mandatory and ready for input check mark removed.
The reference character is '0FISCPER' .
I want to have YTD figures when the user enter single Fiscal Year Period for variable 0P_FPER.
So I have written below code in SE37 : EXIT_SAPLRRS0_001 and include program : ZXRSRU01
==================================================================
case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
===================================================================
After that I use this 'ZYTD_PERIOD' variable in the query .
Also I have used the variable 0P_FPER in another structure.
When I execute the query by entering the value of 0P_FPER as 010.2009 or any other value ,
I am getting below error message ,
*No value could be determined for variable ZYTDPERIOD*_
Below is details of this Error message ,
Note that I have proper Master and Text data for 0CO_AREA and 0COMP_CODE loaded into BI.
=======================================================================
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
=====================================================================================
Is there any special settings needed before writing BEx Customer Exit ?
I have already created a project in CMOD and assinged a proper RSR00001
and EXIT_SAPLRRS0_001 and project is active.
Any help please ....
Regards ,
Amol

My Code is as below ,
          case i_vnam.
              WHEN 'ZYTD_PERIOD'.
              IF I_STEP = 2.
              LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
              CLEAR L_S_RANGE.
              L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
              L_S_RANGE-LOW+4(3) = '001'.
              L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
              L_S_RANGE-SIGN = 'I'.
              L_S_RANGE-OPT = 'BT'.
              APPEND L_S_RANGE TO E_T_RANGE.
              EXIT.
              ENDLOOP.
              ENDIF.
              ENDCASE.

Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST

Hi ,
I am getting the below error:
Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST - Model: class com.eligibilitymodel1.EligibilityModel1. The SSO ticket needed for authentication to WD_MODELDATA_DEST has expired. Close all applications and logon anew!
Regards
Anumit

Anumit,
when will you get this error?
if you are getting this while using adaptive rfc model follow this link Could not create JCOClientConnection for logical System:
if it doesnot work
try to reimport the certificate or restart the server
Thanks
Bala Duvvuri

Error in F-02 : "No chart of accounts could be determined for Company Code

Hi SAP GURUs,
When we tried to post an Journal Entry it is giving the error message as "No chart of accounts could be determined for company code".
Could you please help me with the reason & resolution for this.
Best Regards,
Pavan

Dear,
Please try tcode obd4, define a/c group with COA.
hope it helps
regards

No value could be determined for variable 0P_KEYD2

Hello Gurus,
I am creating a report for Vendor Ageing. I have included the characteristic 0PSTNG_DATE (with restriction variable - 0P_KEYD2) . when I execute the query it gives the following error :-
No value could be determined for variable 0P_KEYD2.
Do I need to edit the SAP Exit for modifications. The query does'nt prompt me for a Key Date.
Thanks in advance..

Hi,
Did you not find any code for the variable in the include program. Try activating the variable in the business content using before and after data flow.
Also check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/ea/fd740780b135428ed0016168974284/content.htm
Bye
Dinesh
(Do not forget to assign points!!)

No value could be determined for variable 0P_FVAEX

We are on BW 7.0 and BEx7.0
I have activated BI Content of InfoCube 0WBS_C11 and all it's SAP delivered Query elements. The InfoCube is loaded with data already.
When I run any of the query in BEx, I got the same error as below:
Initial RANGE-LOW for customer exit variable 0P_FVAEX corrected to #
No value could be determined for variable 0P_FVAEX
Please help.
Thanks

Hi,
There is no value for the variable 0P_FVAEX for fiscalyear variant. default it is populating #.
In company code masterdata(attr & text) there should be fiscalyear variant for FI loading and Controlling area masterdata for other modules loading. 0FISCVART should be filled in masterdata (company code/ controlling area) then you can get report .
If it is not there in the masterdata ask the functional consultant fill the company code data with fiscalyear variant.
This should solve the error.
Thanks,
Satya

No Value could be determined for variable ZCE0018

Hi experts,
I am getting an error while running reports for few selections on Sales Org.(without giving site/store) as below
It is working fine with some other sales org.
*Selection covers data from multiple comp.codes which carry more than one Fisc.Yr Variant not possible to report in multiple Fy variants.Plz refine selections.
*No Value could be determined for variable ZCE0018.
Please reply me how to rectify this error.
Thanks in advance.
regards,
<BMP>

Hello,
the description for the error is:
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.
2. Cause of Error
The attributes for the controlling area (InfoObject 0CO_AREA) or company code (InfoObject 0COMP_CODE) were not loaded into the BW system, or the attributes for the controlling area are not active in the BW system.
Check whether this is the cause of the error in your BW system. Display the contents of table /bi0/mco_area or /bi0/mcomp_code using transaction se16.
Application CO:
Check whether the attributes 'fiscal year variant' (field FISCVARNT) and 'profit center local currency currency type' (field CURTP_PCA) are filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant in the OBJVERS = 'A' is empty, then the error is with variable 0P_FVAEX. If the currency type of the profit center's local currency in OBJVERS = 'A' is empty, then the error is with variable 0P_CTPCA.
Application FI:
Check whether or not the attribute 'fiscal year variant' (field FISCVARNT) is filled in the 'A' version (field OBJVERS) for the selected controlling area. If the fiscal year variant is empty in OBJVERS= 'A', then the error is with variable 0P_FVAEX.
Procedure
Using InfoSource 0CO_AREA, load the attributes for the controlling area or company code into your BW system.
Afterwards, activate the attribute changes in your BW system. To do this, use transaction rsa1, path 'Tools > Hierarchy/Attribute changes', functions button 'InfoObject list'. Choose InfoObject 0CO_AREA or 0COMP_CODE from this list, and activate the attribute changes.
Check through the context in the report what variables are affecting. Anyways it is a BW issue not SCM Logistics, please contact someone from BW-BEX or create a SDN thread in BW forum.
Best Regards,
Christian Rosa

Text Variable error "No value could be determined for variable " Brain 632

Hi,
I want to display current fiscal period as description in the colomn of a query.
Ex. If current fiscal period is 005.2009 in the colomn it should display 2009005
For that I have created a text variable.(Is it correct to create a text variable for this?)
But it gives me following error.
"No value could be determined for variable " Brain 632 Error.
Please help.

I assume that your requirement is suppose a user enter a date as 01/12/2010 - 31/12/2010 in the selection screen then he should get the data for this range in one keyfigure and 01/11/2010 - 31/11/2010
For this requirement you have to create one customer exit variable on calendar day :
I have taken into account only the two values .
Important is to take into account what if a month has 31 days and previous month has 30 days.
The user exit will trow an error in this case .
You need to handle this in the code .
Data :
day type string,
year type string ,
Month type string ,
LS_Calday type Date.
IF i_step = 2.
CLEAR loc_var_range.
READ TABLE i_t_var_range INTO loc_var_range
    WITH KEY vnam = 'Z_PCG1'.
day = loc_var_range-low+6(2) .
Year=loc_var_range-low+0(4).
Month =loc_var_range-low+4(2) .
if month = 01 ,
year= year -1 .
month = '12'
concatenate year month day into LS_Calday .
else if month = 03
and day =31 or day = 30 or day = 29 .
day = 28 .
month = month -1 .
month_high = month
concatenate year month day into LS_Calday .
else if month = 05 or month = 07 or month = 10 .
month = month -1 .
concatenate year month day into LS_Calday .
    CLEAR l_s_range.
    l_s_range-low = LS_Calday .
     l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
restrict the first keyfigure with the user input variable and second with this customer exit variable .

Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA

Hi,
I am facing a big problem...I have created WebDynpro Application & when I am running that application from WebDynpro, it's showing the page but giving me the error message as:-
Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA - Model: class com.bcone.bcool.musa.model.MUSABAPI. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
What do I do? what connections I have to check?
pls help.

Hey if you are connecting to SAP system making use of adaptive RFC model you hav to create logical systems(JCOs).So while creating the model you have to specify 2 logical system names(one for model data or on for the meta data).If you have not created the JCOs or if the JCOs are not active then you are going to get this type of error.To activate those JCOs ask your administrator to activate the JCO for metadata of your application.If you are having proper credentials then log on to portal
System administration>webdynpro>expand the local directory>select your project>click on maintain JCOs and activate the JCO for the metadata.
Or else change the logical system in your application.

Error while executing customer Exit Variable (No value could be determined for variable. BRAIN 632)

Hello,
I created a customer exit variable which has to show the range between the first and last day of the previous month. The query will be executed every first of the month.
Variable is declared as: Customer exit, based on 0CALDAY, Interval, Mandatory and NOT input.
When i debug the query, it is making the calculation but its not populating my variable; when I execute the query from RSRT, the output test shows a message:
ENo value could be determined for variable ZRANGE_PREVMONTH.                            BRAIN               632ZRANGE_PREVMONTH
Below the code i'm using (SAP 7.4)
***Customer Exit to calculate previous month.
IF i_step = 2.
     CASE i_vnam.
          WHEN 'ZRANGE_PREVMONTH'.
DATA: LS_RA_SID TYPE   RSR_S_RANGESID.
DATA: yyyy(4) TYPE n.
DATA: mm(2) TYPE n.
DATA: dd(2) TYPE n.
DATA: fst_date LIKE sy-datum.
DATA: fst_date2 LIKE sy-datum.
LOOP AT i_t_var_range_c INTO loc_var_range
    WHERE vnam = '0DAT'.
      dd = sy-datum+6(2).
      mm = sy-datum+4(2).
      yyyy = sy-datum+0(4).
      fst_date2 = sy-datum.
      IF dd = '01' AND mm = '01'.
        mm = '12'.
        yyyy = yyyy - 1.
      ELSEIF dd = '01' AND mm <> '01'.
        mm = mm - 1.
      ELSEIF dd <> '01'.
        mm = mm - 1.
      ENDIF.
      CLEAR: fst_date.
      CONCATENATE yyyy mm '01' INTO fst_date.
      fst_date2 = fst_date2 - 1.
      CLEAR: ls_ra_sid.
      ls_ra_sid-sign = 'I'.
      ls_ra_sid-opt = 'BT'.
      ls_ra_sid-high = fst_date2.
      ls_ra_sid-low = fst_date.
      APPEND ls_ra_sid TO e_t_range.
ENDLOOP.
ENDCASE.
   ENDIF.

Hi Fernanda,
Try this:
DATA: LS_RA_SID TYPE   RSR_S_RANGESID.
DATA: fst_date LIKE sy-datum.
   CASE i_vnam.
          WHEN 'ZRANGE_PREVMONTH'.
fst_date = sy-datum - 1.
concatenate fst_date(6) '01' into ls_ra_sid-low.
      ls_ra_sid-sign = 'I'.
      ls_ra_sid-opt = 'BT'.
      ls_ra_sid-high = fst_date.
      APPEND ls_ra_sid TO e_t_range.
ENDLOOP.
ENDCASE.
   ENDIF.
Just post here for any queries..
Regards,
Loed

SWO1 - No destination could be determined for logical system

Similar Messages

Maybe you are looking for