Swollen Battery (2007 Macbook)

I recently went with out using or charging my 2007 MacBook for about a week, and when I want to use it I found that the battery was 100% dead. So I plugged it into the charger over night, and in the morning there was no progress the light on the charger was still green. So then I left it on the charger all day and came home to find that the battery was swollen, and still no progress. What do I do?

Wingfield_95 wrote:
Is there any safe way to power it up with out using the battery and just the power supply?
Absolutely NOT, NO
Don't dare use it in its current state
thats lithium pack swelling.       Turn it off, dont dare use it in its current state.
keep it in a cool place until you can get it into the shop.
Contact Apple ASAP for appt. for replacing the battery.
ComputerFixer 
   You can remove the battery from the unit
Dont, dont, dont recommend a user remove a swollen battery
Off-gassing /swelling of a battery has no bearing on the AGE of the battery, and Babowa rightly didnt indicate that was the case.

Similar Messages

  • Swollen battery on macbook pro 17"

    swollen battery on macbook pro 17", laptop running hot, can I remove the battery and still use my computer with ac adapter? Also, what is normal temp for laptop?

    Yes, you can remove the battery, but if we're talking about a unibody system, you'll need to take it somewhere to have it removed. The batteries are locked in by a rather unique screw. That's because the under side of the battery is soft and can be easily punctured.
    But you can have it removed and keep on using it. It will obviously shut off immediately if power is lost, but otherwise there's no issue. And a normal temp is that the system should only feel slightly warm to the touch.

  • Swollen battery, again (Macbook 5,1)

    I have replaced the battery in my Macbook before, but it happened when my machine was in warranty (ACPP). However, as far as I know, as a battery is considered as consumable, I shouldn't get to change it after 6 months but it was still changed FOC regardless partly due to the low charging cycle (I couldn't quite recall the number though).
    After a year plus, the replacement battery is swelling/expanding again, and the charging cycle reads 85 times at the moment. I sent the battery back to the place where I made the previous replacement claim, but was denied right away. They suggested I should make a call to the call center to look for advice.
    The operator guy suggested that I should bring back the machine back to the service center after I told him about the charging cycle, and so I did, but I still don't get to replace it FOC. I really don't feel like buying a new battery because I am not convinced that this is the right solution because this is the second time my battery expanded.
    I am going to collect my machine back from the service center again (yes, I am visiting the service center for the third time for this, and it is ridiculous) and would probably not buy a new Macbook with my own money in future regardless how cool it will be. Yes, I am being ridiculous here as other manufacturer may also treat me like this after warranty but at least my old HP-Compaq (bought in 2004) and Toshiba laptop (bought in 2007) do not get this battery problem (the batteries may not hold much charge as they did, but at least they are not swollen).
    P/S: a quick search in this forum shows a couple of users get their swollen/expanded/bloated battery replaced regardless they are still in warranty, but doesn't look like it is reproduceable here in Malaysia anymore.

    Buy it at MBP:
    http://eshop.macsales.com/shop/apple_laptop/batteries/MacBook_13_Unibody
    I think this is your battery but double check with OWC. They're very knowledgeable.

  • Swollen Battery for MacBook Pro 15"2008

    My battery swelled about 1 inch from it's original size. Could I get it replaced if the warranty expired? I was reading about several batteries that have been recalled, are they related incidences?

    Yes, you probably can — but only Apple can tell you for certain. Make a Genius Bar appointment to have it looked at.

  • Swollen Battery on 2007 Macbook Pro

    My battery has recently started to swell pretty badly, and I have taken it out (running off of power cord) because I am aware of the dangers if it continues to expand. The battery was purchased in December of 2008 to replace the original battery that came with the laptop. I have read some cases from 2006, 2007, and 2008 where there was a recall on the Macbook Pro batteries and apple replaced them free of charge. However, since I purchased this battery in 2008 and it did not come with the laptop, would I still get the same treatment? I have heard that batteries should not swell, regardless of how old they are, so I don't know if this means there was a manufacturing defect or not. If you have heard any RECENT cases of battery swellings, please fill me in. Thanks!

    I took my slightly swollen battery into an Apple store back in May/June. It had 160 cycles. The Apple genius gave me the story that Li-ion batteries swell. It's a normal part of their life. I told him that mine is barely half way through it's life and it's swelling. He said regardless, it is normal. Then last week I pulled out the same battery and it had doubled or even tripled in size. I sent an email to apple and got a call from Apple Executive Relations saying essentially that this problem has been documented, it's been looked into by their engineers, it's normal, and they aren't going to do anything about it, buy a new one. The phone call had a different tone to it than any other I've had with Apple. Sort of like, look, we aren't going to replace it, we don't see it as defective, buy a new one and leave us alone. I don't like it one bit. I use my Mac for video editing as a business. It's enough that I've started looking into switching from FCS to Avid. I don't like the direction Apple has taken in the past few years. Maybe it's time to switch.

  • Possible dead battery on late 2007 MacBook white?

    Yesterday my girlfriend put her late 2007 MacBook (running 10.5.1) to sleep and when she went to wake it up it would appear to have died/shutdown and then tried to start up. There was a whir of the DVD drive and then it started to play the boot sound and then just cut out.
    On further attempts to boot it (from battery) now does the same thing. Though if the power is plugged in then it starts OK. I've tried an SMC reset, but that doesn't appear to have helped.
    The MacBook was purchased in December 2007. Current battery info is as follows:
    Battery Information:
    Model Information:
    Manufacturer: DP
    Device name: ASMB016
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 102a
    Hardware Revision: 0500
    Cell Revision: 0200
    Charge Information:
    Charge remaining (mAh): 3310
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4019
    Health Information:
    Cycle count: 285
    Battery health: Good
    Battery Installed: Yes
    Amperage (mA): 1073
    Voltage (mV): 12535
    Does all this point to a dead battery?
    Cheers,
    Jay

    After a bit more looking it may be the same problem as described on post http://discussions.apple.com/thread.jspa?threadID=1954449&start=0&tstart=0 as we've been away for a week. Also the battery is the same model number (although not firmware) as the one listed in the info for Battery Updater 1.4.
    First things first, I need to backup then upgrade the MacBook to 10.5.8 as the Battery Updater 1.4 requires 10.5.6 or later. Then try the Battery Updater and a charge to see what happens and if all else fails maybe a visit to Apple (eveb though AppleCare is long gone) as the battery is below 300 cycles which some people have got Apple to replace as a faulty battery.

  • HELP! Is a 2007 Macbook with no battery for $120 a good deal in 2014?

    Hello. My son's school is getting rid of some 2007 Macbook Pros for $120, battery NOT included. Specs: OS 10.5.8, HD 160 GB, CPU Intel Duo core 2.13 GHz, Memory 2GB. Is this a good deal in 2014? Thanks for the input!

    You need more details about the model to get an estimate of the battery cost.
    You will have to get a battery from a third party, i.e. not Apple since they do not stock batteries for older models.

  • Bumpy battery - Late 2007 Macbook

    Hi,
    I would like to ask if anyone has noticed a weird behaviour of their batteries with the late 2007 Macbook.
    My battery still works but it has begun "shapeshifting".
    It started being a little bumpy in the middle but now the bump is being more and more noticeable: you can even have the perception it is going to jump out from the MacBook.
    On the internal side, as proof of the shapeshift, some "points" have appeared exactly in the area which is at contact with the metal-like plate as a result of
    I'm getting worried, I would not like my MacBook battery to explode while I'm on a plane or something.
    I began using it without battery but I cannot use it only as a "small desktop replacement".
    So.. anyone with the same issue?
    My best regards,
    Maurizio

    I think that the "MacBook with no battery" is faster than the "MacBook with exploding battery" option, so I'll stick with it as long as I can
    I have to agree on that
    Make sure your battery desn't leak being bumpy and all.

  • 2007 MacBook Battery won't lift out after unlocking latch, it seems to be sticky, please help?

    The battery on my 2007 MacBook won't lift after unlocking latch.  It seems to be stuck and rather sticky and therefore will not lift out to replace. What should I do?

    Oh yeah when I said it wouldn't turn on I mean no start up sound, the fan thing not a sausage. The lights on the side showed the battery was fully charged and the charger had the green light on. Hope that helps
    Thanks again

  • 2007 Macbook Pro - Won't turn off or on. Power on button only results in quickly flashing power-on button on front of computer by display open latch. Turn off by disconnecting power cord and removing battery. Help!

    2007 Macbook Pro OS X Maverick with maxed out processor and hard drive. It's been running beautifully for years! - When shutting down the computer failed to turn off. Now it won't turn off or on. Powering on only results in quickly flashing power-on button on front of computer by display open latch. To turn off by disconnecting power cord and removing battery. Help!

    Hi P S 13,
    If your MacBook Pro will not power on as you describe, I would suggest you troubleshoot using the steps in this article -
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • 2007 MacBook need battery replaced

    I have a 2007 MacBook and I am in need of a new battery. Where can I go to get this taken care of?

    You can order a new battery from Apple's online store and install it yourself.
    This is the battery for the white MB: Rechargeable Battery - 13-inch MacBook (White).

  • Late 2008 MacBook 13": Could old, swollen, battery affect my touchpad?

    Hello all:
    Late 2008 13" MacBook, Aluminum, 10.6.8
    Symptoms:
    For the past 6 months my battery (original from new) fluctuates between 85% and 35% health (iStat Pro), and only holds a charge for 45 minutes, tops.
    My model still has the removable battery, underneath the easily removable cover, held with a latching system.
    The cover is now not flush with rest of body, bowed slightly outward in the middle along the latch line (inside edge, away from edge of body.)
    At about the same time, I noticed that my touchpad has taken on a life of its own, sometimes cursor skitting across the screen, at times all I have to do is touch the trackpad and it responds as if I initiated the "click" function by pushing down.
    Today, it just seemed to stop functioning. Moreover, I couldn't even get a forced quit, even with wired mouse plugged in.
    Now, the only way I can get a click response is by pushing down HARD on lower center of touchpad. This is new today.
    Two-finger scrolling still works fine, it's the click function that has gone wonky.
    It's been really hot today!
    I've read on other fixit forums that this is a textbook symptom of a swollen battery, and the bulging cover sure seems to indicate this. I just figured that there was 5+ years of gunk and dog hair finding it's way into the contacts of the touchpad, but it looks to be a sealed component.
    Before I flip out and take it to the closest MAC repair shop, not easy in southern Spain, and let them mess about with it and wipe out years of data, could it be as easy as replacing the batt?
    Can I still find original or reliable OEM batt?
    As it also looks like only one screw holds the touchpad in place, and I am WAY out of warranty, can I still find original Mac parts for the touchpad if this needs replacing too?
    Many thanks in advance.
    Steve
    PS: Tomorrow I'm gonna go buy a 1TB USB drive and back up my HD, too!!!

    Bryan:
    Ever so cool post. I am going into the local Apple Store tomorrow, here in Marbella Spain. I can't imagine they will honor a warranty problem 5.5 years after the fact, lappy bought in NYC, and registered, but sure worth a bit of insistence. I did buy an AppleCare policy back in December 2008. BTW, all, well worth the money!
    I did do an experiment by removing the batt, but still plugged in. The access cover closed beautifully and flush, as if nothing wrong, but the trackpad still stiff and only responsive to "click" commands if I pressed HARD in a very small sector, middle bottom (facing the keyboard.)
    Once informed, I had a look at the batt, and sure enough, she's bulging in the middle, exactly where the cover bulges. Funny that.
    I will give it my best shot, but I can't imagine that Apple would cover replacement of the touch(track)pad after all these years.
    How long ago did you report, and get satisfaction, from your similar (identical) problem?
    Best,
    Steve

  • 2007 MacBook Battery exploded on plugin after no charge for 3 months

    I have a 2007 MacBook Pro. I plugged it in to charge it for the first time in 3 months and the battery straight-up exploded after 20 minutes. I was told by a miscellaneous apple store employee that "batteries do that". What? Should I have expected an explosion? It warped the outside and everything. It always ran hot and when I took it to the genius bar was told that batteries "run hot". What? Now I feel like I am being given the run around.
    Obviously, all warrenties are expired, but after exploring the communities it looks like there are inconsistancies with how this is being handled. Might I have some guidance?
    I am a long-time Apple user and I have never heard of this issue before now.

    Might I have some guidance?
    call apple and ask them

  • Can I use a 2011 Macbook Pro charger for my 2007 Macbook?

    My charger for my 2007 Macbook works as an AC adapter, but will not charge my battery. My girlfriend has a new Macbook pro and I want to know if I can use her charger to charge my battery. I know they output different wattages, but I'm not sure how that will affect it. I have heard rumors that new Pro chargers will fry the batteries of the older Macbooks but I don't know if there is any truth to that. Thank you in advance for any help you can provide.

    You can use a higher wattage charger to charge a mac that normally uses a lower wattage charge and that is fine.  You do not want to do the opposite.

  • Late 2007 MacBook Pro intermittent black screen

    I have this very odd issue with an intermittent black screen on a late 2007 MacBook Pro (4GB/320GB 7200rpm) Mac OS X 10.6.8 v1.1
    Apologies for the length of the post.
    In cycles separated by a few days to a week, the screen will flicker to black, initially very briefly, then for longer periods until it is black continuously, where it stays from a few hours to a couple of days then it flickers to normal, again very briefly then with longer intervals until it is steady and normal. It can then be fine for a week or more.
    When the screen is working, it's perfect; no lines, stripes, colour shift or any difference to what one would expect. When it is black, the backlight is still operational (and dimming when on battery power) but there is no image - all pixels are solid black. Shining a torch on/through the screen does not reveal any image. When mirrored, the external monitor shows the brightness adjustment moving up and down in response to the key presses but it has no effect on the internal screen.
    My external display (Eizo) is always functional no matter what the built-in one is doing and is completely solid at all times.
    There is no correlation to temperature (I have SMC fan control), sleep, restart, fan speed, power source or anything environmental. The MacBook is on a fan stand for most of the time. External connections make no difference. If the fault is present before changing any of these factors, it is there after.
    I am aware that this machine has known vulnerabilities with GPU and display issues but none present quite like this. I have performed the usual trawl on the net and I now know more than I ever wanted to about attempts to fix it.
    Software remedies attempted:
    Resetting PRAM and power manager.
    No sleep image file (never used this option). I deleted the old swap files that were there in any case but this unsurprisingly did nothing.
    Resetting the display settings via keyboard commands or Sys Prefs.
    Screen savers and settings are not implicated.
    Nothing whatever in the console logs that I can see.
    TechTool Pro gives video RAM a clean bill of health and all other components pass including tests on the HD with TTP and DiskWarrior.
    Safe boot and booting from systems on backups seem to have no effect but one safe boot restored the screen briefly - I think it was a coincidence.
    I updated the OS from 10.6.6 to 10.6.8 while this fault was coming and going and it made no difference. I usually prepare the machine for updates by running the cron jobs, repairing permissions etc.
    In expectation of suffering this fault when the external monitor was not connected, I installed iScreen on the MacBook and use my iPad as a supplementary display and that works well too. Having all three operating, when the internal is functioning, is quite fun.
    Hardware tests:
    I removed the upper plate holding the keyboard and the interior of the machine was very clean with only some small dust accumulations in the fans, which were removed. There was no sign of any discolouration, corrosion, or other unpleasantness on the PCBs. All connectors and wiring looked good.
    Every part of the logic board, cables and connectors were percussed, gently deflected and spray freezed, both while the fault was present and not (machine running) with no effect.
    Display back was removed and the LCD board given the same treatment. No changes.
    Display cable disconnected at both ends and tested for continuity (probe resistance accounted for) and consistency with a Fluke 87 multimeter - passed OK. On a scope, active signals and power were present on all the pins when the display was working but the fault did not occur during this test, which might have been interesting.
    No apparent shorting of the display cable but without removing it this cannot be proved.
    Problem not affected by hinge position, pressure on any part of the display, twisting, percussing etc.
    Used compressed air to blow out the connectors which were reseated carefully.
    After all this, the machine remains in exactly the same state, cycling between operational and black with various flickering stages as it comes and goes.
    All I can deduce is that as the external monitor has always been OK, the GPU itself is probably working fine and the fault is more likely in the LCD panel electronics. I doesn't feel like a software issue to me but heck, I don't know what is going on.
    Does anyone have any experience of something like this?
    Thanks,
    Joel.

    Thomas,
    Thanks for your post and I'm sorry you have suffered the same problems.
    My trust levels are not very high because it's clear there is some systemic display problem with this model, which is why Apple are fixing them. As I mentioned, we have no idea if the replacement boards are any different to the originals. From your experience it would look like they are not and my suspicion is that it is very unlikely that Apple made a new batch of these logic boards a long time after the model was discontinued. If anyone has evidence to the contrary, I stand to be corrected.
    As you say, the difference between our two faults appears to be that a physical deformation of some part of the machine does something with yours but never did with mine. At one point I felt that a short in the internal display cable seemed like the best explanation for the problem but it looks like it's more complex than that because of the behaviour of our external displays and subsequent strange booting behaviour.
    If, as I have read, the soldering of the GPU was faulty and leads to progressive failure of the graphics sub-system, then all kinds of strange behaviours could arise and produce the intermittent problems we have seen. Micro-fractures of the chip interconnects would suggest that tiny movements might change the presentation of the fault. If soldering really is the issue, then keeping the machine as cool as possible will extend the life of the connections. Consequently mine will sit on a fan-stand for the rest of its days, which is no problem because it just had Win 7 installed on it and I don't want to be seen in public with it in that state ;-)
    All we can conclude is that a logic board swap fixes the problem for some indeterminate period, so the problem is on that board. Whether it is a design fault with the NVIDIA chip itself or a manufacturing fault with the board is not clear but we can probably forget LCD panels, cables, sleep issues, power supplies and all the other peripheral issues unless there is yet another design issue that causes the GPU to fail.
    Are you intending to present your machine to Apple for another go at a fix?

Maybe you are looking for

  • How can I use the Get_ADgroup cmdlet to filter on specific groups?

    I'm trying to extract the users from specific groups Get-AdGroup -Filter {('Name -like "MyCo *Admin*"') -or (Name -like MyCo Helpdesk"')} This works: Get-ADGroup -Filter 'Name -like "MyCo *Admin*"' I  have an number of administrator groups and one w

  • Illustrator CS4 won't open

    I recently got a brand new 27 inch Imac, and put CS4 on it. Every program in the suite and even Lightroom work great, EXCEPT illustrator. The load screen some on, and when it gets to initializing plug ins "PDF suite" it ALWAYS crashes. I've created n

  • Adobe Acrobat Doesn't always open

    Hello, Recently after installing a new nVidao Quadro K2200 video card and driver, when I double-click on a pdf file the file may or may not open.  Seems like if I'm opening 3 pdf files the first may take 2 or 3 double-clicks and the second and third

  • Resize Time Machine sparsebundle size in Disk Utility

    I have two MacBooks backing up to a 500GB Time Capsule. Each has a sparsebundle on the Time Capsule that seem to have maximum sizes of the entire disk. Can I resize each sparsebundle in Disk Utility to something smaller, say 100GB, by simply dragging

  • Help with instalation of 3.0!!

    I just bout 3.0 for itouch like 4hrs ago and i cant download. Ive disabled my firewall and virus protection!!