SWR50 It does not turn on after the update

Greetings
After the last update with PC, when trying to turn on the device, showing boot-animation, but without success. I left on for a long time.
Repeat the update, at the moment, it is not possible ("update is not required").
Before this device is working properly, and updated via the PC correctly.
Earlier and now to update device used Sony PC Companion 2.1.
Thank you for your attention.

@DooMeRocK
What if you connect the SW3 to a wall charger > press and hold power for 15 seconds > let it charge for an hour. or use PCC or Bridge to repair it.
PC Companion (PCC)
Bridge (for Mac)
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

T400 does not turn on after bios update.

Hi there people,
Sorry if this has been posted before,
Basically done a bios update and now the laptop does not turn on, there is just a blank screen. Can hear fan/processor running but nothing else.
Any help will be appreciated.
Thank you.

try taking out the ram, and restart the laptop without it, does it beep?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Vaio Flip does not turn on after BIOS update

Hello Community, I'm using Sony Vaio Flip 13'' (SVF13N13CXB) for about a year.Yesterday I decided to upgrade my firmware to address noisy fan etc. So I got update utility from Sony website, launched it, got prompt to reboot my PC to continue upgrading process. After rebooting I got a Vaio logo and progress indicator rolling. After reching 66% it stuck. I waited for about an hour, there was no progress, so I had to power off my PC (hold power button for 5 seconds).Now when I try to power it on using Power or Assistance buttons, it will turn on the green led, fan starts making some noise, and thats it. Screen is blank. I searched throught this site, tried to press battery button at the bottom with clip, discunnecting/connecting power adater, etc, etc. Unfortunatelly nothing helps.I assume the BIOS is now corrupted (I may be wrong although). Please can you suggest how can I recover the firmware to factory state? Thank you, Vitalii

Hi vetooon,
Welcome to Sony Community!
It looks like your laptop is already corrupted. Please follow the steps below to troubleshoot your computer.
Power Cycle the computer by poking the battery reset hole [4] for about 15-20 mins with the laptop unplug.
2. Plug it back in then press the power button. If issue persist proceed to the next step .
3. Press and hold the power button for 3-5 mins or until its completely off.
4. Press the "ASSIST" button. When you see the "Vaio care Rescue mode" page, select F2 to go to BIOS then reset it to default.
5. Go back to "Vaio care Rescue mode" page, we'll check if you have a Restore Point so we can go back to an earlier date. On step #7 instead of choosing the "Recovery and Maintain" choose the Advance Option, then choose the current operating system of your pc (ex. Windows 8)
6. If issue still persist then click on this link and follow the instructions carefully. Please take note that on this process you will go back to factory setting and all the files will be deleted. You can seek the assistance of a professional technician to retrieve your files.
I hope this helps you.
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution"

Ipad does not turn off after ios7 update

I recently updated my ipad 2 to the iOS 7.3 update. I left it alone to update because I knew it would take some time. I set it up and then had to leave my ipad to take care of my baby. I came back and it wouldn't turn on. I figured it had run out of juice so I charged it all day today and it still won't turn on.

Try rebooting...
press and hold the home and power buttons until the Apple icon is displayed, then let go.

HT201412 my ipod touch does not turn on after steps 1-4. It only shows the apple logo and then turns off

my ipod touch does not turn on after steps 1-4. It only shows the apple logo and turns off

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Whenever I close my laptop then open it it does not turn back on, the screen stays off but I will hear the fan running. I then have to physically press the power button for it to turn on. Help!

Whenever I close my laptop then open it it does not turn back on, the screen stays off but I will hear the fan running. I then have to physically press the power button for it to turn on. Help!

Try here. iPhone and iPod touch: Frozen and unresponsive

Hi. I just wanted to update my 3 apps PS, Brigde and Indesign. After doing that I wasn't ablle to open Brigde??? PS and Indesign works fine. Further more the Application Manager does not seem to register the updates I have made. Everytime I open the compu

Hi. I just wanted to update my 3 apps PS, Brigde and Indesign. After doing that I wasn't abble to open Brigde??? PS and Indesign works fine. Further more the Application Manager does not seem to register the updates I have made on Indesign and PS. Everytime I open the computer MacIBook 4.1, OS 10.6.7) it looks like I haven't updated software? Please help! Kurt

Moving this discussion to the Bridge General Discussion forum.
Kurt Rodahl Hoppe I would recommend reviewing Updates repeatedly applied | CC which discusses how to apply the updates successfully.

My LCD does not turn off during the call. I have a iphone 4. What do i do?

My LCD does not turn off during the call. I have a iphone 4. What do i do?

You may have a defective proximity sensor but try some basic troubleshooting first...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

My ipod touch is not getting recognised after the update in my itunes library. the library is updated. and it shows the connect to itunes sign.

my ipod touch is not getting recognised after the update in my itunes library. i have updated my library as well. but it shows the connect to itunes sign on my ipod.

If it happened after updating iTunes on the computer see:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If after updating the iOS on your iPod:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ipod 5 flash not working right after the update

Hi first off: my flash was perfect before the update so I think its not hardware?
- after the update yesterday today my friend and I tried to take a selfie in a dark place so we wanted to use the back camera and turned the flash as ON for our surprise it didnt work.
- we tried then to take something else's pic and the flash worked
- we tried the selfie again this time using the camera buttom not the volume's but didnt work.
- we used hipstamatic and VSCOCam then and it worked perfectly
- I tried turning on and off the device and did not work.
- I did a full restore through Itunes and didnt work.
anybody else having this problem?
any suggestion to fix it?

I contacted apple and they claimed it to be an obvious software bug, they said I had to take it to an assistence to get a new one intantly but as theres no assistence in my town and I cant go to nearby one I will have to just replace the stock app for a better one... once more I'm disapointed with apple.

Since I updated to firefox 3.6 I keep gettin multiple popup windows. This did not happen until after the update. The popups appear as regular windows so popup blockers can not stop them.

Since I updated to firefox 3.6 I keep gettin multiple pop up windows. This did not happen until after the update. The pop ups appear as regular windows so pop up blockers can not stop them. Why has the new update made my laptop more vulnerable. updates are supposed to be improvements!
== This happened ==
Every time Firefox opened
== as soon as I updated to ver 3.6

Im having the same problem, I updated my Iphone 4S to 6.1.3, shortly after that my phone had no audio. It was working fine one minute and then stopped. Was listening to music when sound gave out on me. It wont ring, phone just vibrates even after turning off vibration option. I've tried all the options listed and nothing. My phone has never been jailbroken either. If I connect the earphones is works perfectly. On one of my last calls received, phone's ringtone was heard for about 2 seconds before muting and just vibrating. Ringtone sounded perfect, speakers did not sound damaged.
What else could be done? I've read several post regarding this and it seems like Apple has no solution to this yet. Very dissappointed.

HT201272 İos upgrade before i bought 7 , fifa 14 has not been purchased after the update again as in-app purchase to buy intake is required.

İos upgrade before i bought 7 , fifa 14 has not been purchased after the update again as in-app purchase to buy intake is required.

İos upgrade before i bought 7 , fifa 14 has not been purchased after the update again as in-app purchase to buy intake is required.

T520: Monitor does not turn on after boot or waking from sleep

I have a pretty standard T520, the only modifications are upgrading to a larger battery and higher screen resolution (1600x1200), and am currently running windows 7 64bit. Whenever I turn on the machine from a powered off state, or if I try and wake it up from being asleep, 2/3 of the time the monitor will fail to turn on. I am only able to remedy this by closing the lid, letting it go to sleep again, opening it again, holding down the fn key (if that even helps), and hoping it turns on the next time. On a fresh boot, the screen backlight is on, but there is never anything displayed on the monitor, so I cannot even go in to the BIOS. To get to the BIOS, I have to boot normally, repeatedly open/close the monitor until it displays something, reboot, and hope the monitor is still working after the reboot.
The forum posts I have seen on this topic seem to only relate to this problem with external monitors; however, this is occuring with the laptop monitor itself.
Has anyone else had this issue, or know of ways to correct it?

One other note: I am not hearing the hard drive start spinning on the times that the monitor does not turn on when returning from hibernate. When the monitor does turn on, there is the distinct sound of the hard drive starting up, and I can feel a bit of torque within the laptop from the hdd.

Iphone 3gs does not turn on after ios 6 update

After the ios6 update, my iphone 3gs does not turn on. I see the apple logo, after a minute, it boots again and i see the logo again. This process seems to continue like a circle. After a search the net, i see that i am not the only one. A quick fix and suggestions please, as i need my phone of course.
Btw, Apple, i know that this is an old hardware and i will buy the new iphone 5 when it is available here in my country in December. But of course, you claşmed this update supports my 3gs, you should immediately find a fix
Regards..

Well, i don't see an another solution possible; you should try again and again to restore. Btw, my phone seemed to operate strange (even the stock mail app began to crash) so i tried hard reset (home button + sleep/wake button until seeing the apple logo). After that i found my phone again in dfu mode this night so began restoring again now.
It seems that apple didn't tested ios6 enough with the 3GS. I have a 32 GB phone so this will be near 60 gb download from the icloud over my broadband connection.

HT201412 my ipad3 does not turn on after it went off while using it, anyone with same experience and have it resolve already?

my Ipad 3 will not turn-on after it went off while using it, anyone with the same experience and have it resolve?

Is the battery charged?
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

SWR50 It does not turn on after the update

Similar Messages

Maybe you are looking for