SWUF is not active in sap ecc 6.0

Dear Gurus
I have to use the tcode: SWUF in ECC 6.0, but I don't find it anymore,
Somebody can help me?
Is there an alternative mode to display the same result of SWUF?
Thanks a lot,
Cheers
Vanessa

Hello,
SWUF is workflow runtime system administration? Seems it disappeared in 4.6 or 4.7.
Try SWDC_RUNTIME and SWDC_DEFINITION - not sure if they are in ECC6.
Let us know if this is the solution.
regards
Rick Bakker
Hanabi Technology

Similar Messages

  • CJ20N is not working in SAP ECC 6.0

    Hello Everybody.
    In my SAP ECC 6.0 I log in SPANISH and launch tcode: CJ2ON - Project Builder and it transaction code does not work my session hangs and the message in the status bar is: 
    STARTING APLICATION PROJECT BUILDER (English)
    Inicio Aplicación Project Builder (Spanish)
    For my Customer is a must to use this tcode in Spanish. In English this transacction works fine.
    Here the level components:
    SAP_BASIS            | 700        | 0006  | SAPKB70006           | SAP Basis Component                                         |
    SAP_ABA
    700
    0006
    SAPKA70006
    Cross-Application Component
    PI_BASIS
    2005_1_700
    0007
    SAPKIPYJ77
    PI_BASIS 2005_1_700
    ST-PI
    2005_1_700
    0002
    SAPKITLQI2
    SAP Solution Tools Plug-In
    SAP_BW
    700
    0006
    SAPKW70006
    SAP NetWeaver BI 7.0
    SAP_AP
    700
    0003
    SAPKNA7003
    SAP Application Platform
    SAP_HR
    600
    0003
    SAPKE60003
    Human Resources
    SAP_APPL
    600
    0003
    SAPKH60003
    Logistics and Accounting
    EA-IPPE
    400
    0003
    SAPKGPID03
    SAP iPPE
    EA-APPL
    600
    0003
    SAPKGPAD03
    SAP R/3 Enterprise Add-On PLM, SCM, Financials
    EA-DFPS
    600
    0003
    SAPKGPDD03
    SAP R/3 Enterprise Defense Forces & Public Securit
    EA-HR
    600
    0003
    SAPKGPHD03
    SAP R/3 Enterprise Add-On HR
    EA-FINSERV
    600
    0003
    SAPKGPFD03
    SAP R/3 Enterprise Financial Services
    FINBASIS
    600
    0003
    SAPK-60003INFINBASIS
    Fin. Basis
    EA-PS
    600
    0003
    SAPKGPPD03
    SAP R/3 Enterprise Public Services
    EA-RETAIL
    600
    0003
    SAPKGPRD03
    SAP R/3 Enterprise Retail
    EA-GLTRADE
    600
    0003
    SAPKGPGD03
    SAP R/3 Enterprise Global Trade
    ECC-DIMP
    600
    0001
    SAPK-60001INECCDIMP
    DIMP
    ERECRUIT
    600
    0003
    SAPK-60003INERECRUIT
    E-Recruiting
    FI-CA
    600
    0003
    SAPK-60003INFICA
    FI-CA
    FI-CAX
    600
    0003
    SAPK-60003INFICAX
    FI-CA Extended
    INSURANCE
    600
    0003
    SAPK-60003ININSURANC
    SAP Insurance
    IS-CWM
    600
    0003
    SAPK-60003INISCWM
    Industry Solution Catch Weight Management
    IS-H
    600
    0003
    SAPK-60003INISH
    SAP Healthcare
    IS-M
    600
    0003
    SAPK-60003INISM
    SAP MEDIA
    IS-OIL
    600
    0003
    SAPK-60003INISOIL
    IS-OIL
    IS-PS-CA
    600
    0003
    SAPK-60003INISPSCA
    IS-PUBLIC SECTOR CONTRACT ACCOUNTING
    IS-UT
    600
    0003
    SAPK-60003INISUT
    SAP Utilities/Telecommunication
    SEM-BW
    600
    0003
    SAPKGS6003
    SEM-BW: Strategic Enterprise Management
    LSOFE
    600
    0003
    SAPK-60003INLSOFE
    SAP Learning Solution Front-End
    | ST-A/PI              | 01H_ECC600 | 0000  |      -               | Application Servicetools for ECC 600            
    Have you experienced this issue, can you please give your ideas to solve it ?

    Hello,
    SWUF is workflow runtime system administration? Seems it disappeared in 4.6 or 4.7.
    Try SWDC_RUNTIME and SWDC_DEFINITION - not sure if they are in ECC6.
    Let us know if this is the solution.
    regards
    Rick Bakker
    Hanabi Technology

  • SNC is not activated in the ECC system.

    Hi Experts,
    The ECC system is not coming up when I add the below mentioned parameters in the Instance profile. The issue I have identified it is database is coming up but SAP application is not and all the work process are in ended stated and message server & dispatcher are not coming up in the system.
    The SNC Parameters are...
    snc/enable =1
    snc/identity/as=p:SAPServiceSID/abcdevde1.abc.no at ABC.NO
    snc/accept_insecure_gui=1
    snc/gssapi_lib = /usr/lib/libgssapi_krb5.a (libgssapi_krb5.a.so)
    Kindly,see the work process developer trace log details...
    N SncInit(): Initializing Secure Network Communication (SNC)
    N IBM RS/6000 with AIX (st,ascii,SAP_UC/size_t/void* = 16/64/64)
    N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)N SncInit(): found snc/data_protection/min=2, using 2 (Integrity Level)
    N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)N SncInit(): found
    snc/gssapi_lib=/usr/lib/libgssapi_krb5.a(libgssapi_krb5.a.so)
    N File "/usr/lib/libgssapi_krb5.a(libgssapi_krb5.a.so)" dynamically
    loaded as GSS-API v2 library.
    N The internal Adapter for the loaded GSS-API mechanism identifies as:
    N Internal SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
    N SncInit(): found
    snc/identity/as=p:SAPServiceSID/abcdevde1.abc.no at ABC.NO
    N *** ERROR => SncPAcquireCred()==SNCERR_GSSAPI [sncxxall.c 1439]
    N GSS-API(maj): Miscellaneous failure
    N GSS-API(min): No such file or directory
    N Could't acquire ACCEPTING credentials for
    N name="p:SAPServiceSID/abcdevde1.abc.no at ABC.NO"
    N SncInit(): Fatal -- Accepting Credentials not available!
    N <<- SncInit()==SNCERR_GSSAPI
    N sec_avail = "false"
    M ***LOG R19=> ThSncInit, SncInitU ( SNC-000004) [thxxsnc.c 230]
    M *** ERROR => ThSncInit: SncInitU (SNCERR_GSSAPI) [thxxsnc.c 232]
    M in_ThErrHandle: 1
    M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1)
    [thxxhead.c 10651]
    As per the forum rules @---> at is replaced in the above error.
    Kindly,look in to the issue and suggest the solution how to activate the SNC in the ECC system for the Kerberos SSO purpose.
    OS : AIX 6.1
    SAP : SAP Netweaver EHP1
    Database : IBM DB2 9.5
    Actually,I'm configuring the Kerberos SSO between Active Directory & SAP. I have already generated the keytab file in the AD and copied in the AIX system under the /etc/krb5 directory.The Ticket-Grating-Ticket is genarated in the system and SIDADM is able to access the keytab file.
    If any one faced already above stated issue and please provide the solution if you have resolved the issue.
    Thanks & Regards
    Sandeep.

    N Could't acquire ACCEPTING credentials for
    N name="p:SAPServiceSID/abcdevde1.abc.no at ABC.NO"
    N SncInit(): Fatal -- Accepting Credentials not available!
    You need to authenticate to your KDC before you start SAP.
    As <SID>adm user execute:
    kinit -V -k SAPServiceSID/abcdevde1.abc.no at ABC.NO
    The result should be "Authenticated to Kerberos v5". You must get this right before you start your SAP system and then add it to a cron job so that the tickets get automatically renewed otherwise they will expire.
    Nelis

  • The cluster resource could not be found-SAP ECC on Windows Server 2008 MSCS

    Hi,
    I'm installing SAP ECC 6.0 on Windows server 2008 MSCS Cluster. As mentioned in the guide, i've created a service and added a resource.
    I was able to successfully configure the DB installation and cluster configuration. But when I start the ASCS installation, the installation fails when it tries to create system folders with the following error.
    Error when sharing file system export (share) saploc : The cluster resource could not be found
    I'm using a user with domain admin access and also a member of the local administrators group. I've even tried to install using the domain administrator user but still the problem exists.
    Can anyone please let me know where am I going wrong ?
    NB: The host on which I'm installing is not a domain controller but it is a member of a domain.
    Regards,
    Varadharajan M

    Yes Krishna,
    I've not created any shared folders manually and I've used the "Use domain of current user" option.
    Actually SAPINST has created the usr and sap folder in the SAP drive (say E: drive) which is a clustered disk. The name of that clustered sidk is "Clustered Disk 1". I could able to open up the shared directories available in that SAP virtual host by issuing
    <SAPGRP>. I don't know where am I going wrong:( I've also opened a call with a SAP and waiting for their reply.
    Regards,
    Varadharajan M

  • SAP PI FTP sender adapter not working with SAP ECC over Itanium

    Hi,
    We have been running normally SAP PI 7.0 SP14 with no issue for a while.
    We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
    We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
    Does anyone have any idea?
    Thanks a lot for your help
    Diana

    Hi,
    I am using FTP connection and for the receiver it is working fine.
    Thanks
    Diana

  • Help needed applying OSS note 981295 in SAP ECC 5.0 with SAP Kernel 640_REL

    Hi Experts,
    Our functional team is trying to implement a kind of workflow through a notification via SAP Inbox (transaction code SBWP) after the release of a Purchase Order (Transaction code ME29), this is every time when a purchase order is released through transaction code ME29, a notification will be sent to the SAP Inbox (transaction code SBWP). So according to this they told me to implement OSS note 981295, but using transaction SNOTE I get the message that this note can't be implemented in my system this because my SAP Kernel version is the release 6.40 and the needed SAP Kernel for this note is from version 7.00 to version 7.10. So what do you recommend please in this case in order to implement the required functionality on our SAP ECC 5.0 System?
    Best Regards,
    Erik Espinosa

    Note clearly states
    This note is only relevant if the following Support Package is installed in the system:
    NW04s: Support Package SAPKB70008
    Meaning is not relevat to your case. You need to keep looking... if you open an OSS message people from SAP might put you in the right direction.
    Regards
    Juan

  • ITServer - Internet Service created by us not working in SAP ECC

    Hai all,
    We have SAP R/3 4.6C and a ITS server 6.1. We created some Internet service and published in our ITS server.
    We have ugpraded our system to SAP ERP Central Component 5.0, which has inbuilt ITS server. I published the standard SAP internet service "BWSP" and our own internet services.  The problem is standard SAP Internet Service is working whereas the the internet service which we developed is not running.
    Before publishing i did the following settings, Utilities => Settings => Internet Transaction Server, in the "Test Service" tab i have selected "Default Web Server" radio button and on "Publish" tab i have selected "On All Defined Sites".
    I published the service by selecting Publish =>Complete Service by right clicking on the service name.
    When i execute the service using ITS url i am getting the following error
    Service cannot be reached
    What has happened?
    URL http://devnw2.xy.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available
    Please let me know what's wrong and what is the solution to correct it.
    Regards,
    Basha.

    Hai Raja,
    I tried adding in the entry as below.
    The below value i just copied from the service BWSP and put it here and changed the transaction code.
    ~TRANSACTION     zgeestc017
    ~THEME     99
    ~COOKIES     1
    ~DESIGNS     sap_streamline
    ~RUNTIMEMODE     pm
    ~DISCONNECTONCLOSE     0
    ~FLICKERFREE     0
    ~URLIMAGE     /sap/public/bc/its/graphics
    ~URLMIME     /sap/public/bc/its/mimes
    ~URLARCHIVE     /scripts/sapawl.dll
    ~GENERATEDYNPRO     1
    The below is the full error which i got when i tried to run the service after doing the above change.
    What has happened?
    URL http://devnw2.abc.gov.sg:8000/sap/bc/gui/sap/its/ZGEESIS001/! call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system D00 with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:devnw2_D00_00-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    Regards,
    Basha.

  • Anti dumping code not on PO, SAP ECC 6.0 Foreign Trade FT

    I am trying to automatically populate the anti dumping code on the Customs Data sub tab (under the Import tab at the item level) when loading a purchase order (ME21N).  I loaded the importing country, import code number (HTS), origin country, manufacturer, vendor, material, and preference code (100 u2013 Without preference verification) in config using u201CDefine Code Determination for Anti-Dumpingu201D.  The HTS number populates automatically but the anti dumping number does not carry over.  It may be related to the manufacturing number u2013 I know it is required to match the anti dumping criteria but the vendor number appears to be automatically populated in the manufacturer number on the Customs Data sub tab.  I loaded a different u201Cmanufacturing numberu201D (actually a vendor number) in config (u201CDefine Code Determinationu201D above) and manually added it to the manufacturer number on the Customs Data tab but the anti dumping code field still remains blank.  I also tried the same approach loading the same number for both the vendor and manufacturer (which is closer to the real world business practice).  I would appreciate any guidance you can provide.

    if you have moved from non-unicode to unicode system, then issue could arise in code where  extensionin-VALUEPART1 is populated.
    character length 8 byte vs 16 byte

  • FM: UPDATE_FEBKO_STATUS does not exist in SAP ECC 6.0

    Hi,
    Can anybody please suggest me the replacement for the above mentioned FM?
    Regards
    s@k

    Dear Dzed,
    I have compared the code for the FMs: UPDATE_FEBKO_STATUS and UPDATE_FEBKO_VB_STATUS, and found some differences.
    Will it still have the same functionality?
    Kindly suggest.
    Regards
    s@k

  • Layout 2.00 com mensageria "Z" - Aplicação de Notas no SAP ECC

    Olá pessoal,
    Estou participando de um projeto para implementar a versão 2.0 do XML em um cliente que não tem a mensageria startard (GRC).
    Já levantei as notas necessárias no SAP ECC (estão num total de 42).
    A mensageria Z, muito semelhante do Acelerador/GRC pois também foi desenvolvida em uma instância SAP com o PI como integrador, deve trabalhar da mesma forma que o GRC no sentido de permitir o envio das duas versões (1.10 e 2.00) em paralelo através da configuração de Business Place no SAP ECC.
    Minha dúvida é a seguinte:
    Há algum impacto para as execuções na versão 1.10 se aplicarmos as Notas OSS no SAP ECC num primeiro momento e depois começarmos as adequações na mensageria?
    Desde já agradeço,
    Daniela

    Olá Daniela,
    Aplicando as SAP notes, a estrutura do FM J_1B_NFE_XML_OUT (que é utilizado outras mensagerias - não SAP) é alterado com a inclusão de novos parâmetros de importação, porém estes são opcionais o que não irá impactar a solução de mensageria não standard.
    Lembre-se também de não alterar a versão do XML (IMG: Cross-Application Components, choose General Application Functions --> Nota Fiscal --> CNPJ Business Places --> Define Business Places).
    E caso as SAP notes relacionadas aos motivos de contingência estejam sendo aplicadas agora, será necessário que o funcional realize as configurações necessárias (motivos de contingência) conforme descrito na Note 1451966 - NF-e: contingency date, time and reason .
    At.
    David

  • Server tools not activating B1 2007 + Windows XP

    Hie.
    I am having problems also with server tools not activating for SAP Business 2007 on an Windows XP machine.
    Thank you for your help.

    Have you checked this thread?
    Error while connecting to SAP Server from Windows XP Client.
    Thanks,
    Gordon

  • SAP ECC 5.0 after installation does not start.

    I have installated ECC 5.0 - ABAP Stack in my PC which has 1 GB of RAM and enough hard disk resource. when i start SAP system from MMC it starts and then shuts down after some time. all my work process die one by one.
    i have attached the dev_disp file content with this. please advise what could be the problem and how to solve it? Its an emergency, please help..
    dev_disp trace file
    trc file: "dev_disp", trc level: 1, release: "640"
    Thu Apr 12 13:25:23 2007
    kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
    length of sys_adm_ext is 312 bytes
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    43
    intno      20020600
    make:      multithreaded, ASCII
    pid        1060
    ***LOG Q00=> DpSapEnvInit, DPStart (09 1060) [dpxxdisp.c   1100]
         shared lib "dw_xml.dll" version 43 successfully loaded
    Thu Apr 12 13:25:24 2007
         shared lib "dw_xtc.dll" version 43 successfully loaded
         shared lib "dw_stl.dll" version 43 successfully loaded
         shared lib "dw_gui.dll" version 43 successfully loaded
    Thu Apr 12 13:25:28 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3886]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          6624     (828)
    DpShMCreate: sizeof(tm_adm)          2219848     (11044)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)          192000     (384)
    DpShMCreate: sizeof(vmc_adm)          0     (320)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 03970040, size: 2505416)
    DpShMCreate: allocated sys_adm at 03970040
    DpShMCreate: allocated wp_adm at 039717A8
    DpShMCreate: allocated tm_adm_list at 03973188
    DpShMCreate: allocated tm_adm at 039731B0
    DpShMCreate: allocated wp_ca_adm at 03B910F8
    DpShMCreate: allocated appc_ca_adm at 03B95748
    DpShMCreate: allocated comm_adm_list at 03B96EB8
    DpShMCreate: allocated comm_adm at 03B96ED0
    DpShMCreate: allocated vmc_adm_list at 03BC5CD0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 03BC5CF8
    DpShMCreate: allocated wall_adm at 03BC5D00
    MBUF state OFF
    Thu Apr 12 13:25:29 2007
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    rdisp/http_min_wait_dia_wp : 1 -> 1
    Thu Apr 12 13:25:30 2007
    ***LOG Q0K=> DpMsAttach, mscon ( vyasa) [dpxxdisp.c   9736]
    Thu Apr 12 13:25:31 2007
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    Thu Apr 12 13:25:32 2007
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 43
    Release check o.K.
    Thu Apr 12 13:26:10 2007
    ERROR => W0 (pid 2052) died [dpxxdisp.c   12187]
    ERROR => W1 (pid 2060) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 2068) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 2076) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 2084) died [dpxxdisp.c   12187]
    ERROR => W5 (pid 2092) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W6 (pid 2100) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W7 (pid 2108) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-2052 (SIGUSR2)
    ERROR => DpWpKill(2052, SIGUSR2) failed [dpxxtool.c   2468]
    killing W1-2060 (SIGUSR2)
    ERROR => DpWpKill(2060, SIGUSR2) failed [dpxxtool.c   2468]
    killing W2-2068 (SIGUSR2)
    ERROR => DpWpKill(2068, SIGUSR2) failed [dpxxtool.c   2468]
    killing W3-2076 (SIGUSR2)
    ERROR => DpWpKill(2076, SIGUSR2) failed [dpxxtool.c   2468]
    killing W4-2084 (SIGUSR2)
    ERROR => DpWpKill(2084, SIGUSR2) failed [dpxxtool.c   2468]
    killing W5-2092 (SIGUSR2)
    ERROR => DpWpKill(2092, SIGUSR2) failed [dpxxtool.c   2468]
    killing W6-2100 (SIGUSR2)
    ERROR => DpWpKill(2100, SIGUSR2) failed [dpxxtool.c   2468]
    killing W7-2108 (SIGUSR2)
    ERROR => DpWpKill(2108, SIGUSR2) failed [dpxxtool.c   2468]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=1661
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 12 13:26:20 2007
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)               Thu Apr 12 07:56:20 2007
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     2052 Ended         no      1   0             0                                                             
    1 DIA     2060 Ended         no      1   0             0                                                             
    2 UPD     2068 Ended         no      1   0             0                                                             
    3 ENQ     2076 Ended         no      1   0             0                                                             
    4 BTC     2084 Ended         no      1   0             0                                                             
    5 BTC     2092 Ended         no      1   0             0                                                             
    6 SPO     2100 Ended         no      1   0             0                                                             
    7 UP2     2108 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Thu Apr 12 07:56:20 2007
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    10
    10
    --------++++--
    +
    DIA
    5
    5
    2000
    5
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          13
    wake_evt_udp_now     0
    wake events           total     9,  udp     8 ( 88%),  shm     1 ( 11%)
    since last update     total     9,  udp     8 ( 88%),  shm     1 ( 11%)
    Dump of tm_adm structure:               Thu Apr 12 07:56:20 2007
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Apr 12 07:56:20 2007
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=1661
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 12 13:26:25 2007
    NiISelect: TIMEOUT occured (5000 ms)
    Shutdown server ...
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing process (2028) (SOFT_KILL)
    Stop icman
    killing process (2032) (SOFT_KILL)
    Terminate gui connections
    [DpProcDied] Process lives  (PID:2028  HANDLE:1632)
    waiting for termination of gateway
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=1661
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 12 13:26:26 2007
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:2028  HANDLE:1632)
    [DpProcDied] Process died  (PID:2032  HANDLE:1624)
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    NiIMyHostName: hostname = 'vyasa'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9962]
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiSelClear: removed hdl 3 from selectset
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
    MBUF component DOWN
    NiBufClose: clear extensions for hdl 3
    NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 3 / socket 1640
    MsIDetach: detach MS-system
    EsCleanup ....
    ***LOG Q05=> DpHalt, DPStop ( 1060) [dpxxdisp.c   8495]
    Good Bye .....
    and .........
    trc file: "dev_disp", trc level: 1, release: "640"
    Thu Apr 12 23:42:24 2007
    kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
    length of sys_adm_ext is 312 bytes
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    43
    intno      20020600
    make:      multithreaded, ASCII
    pid        1544
    Thu Apr 12 23:42:25 2007
    ***LOG Q00=> DpSapEnvInit, DPStart (09 1544) [dpxxdisp.c   1100]
         shared lib "dw_xml.dll" version 43 successfully loaded
         shared lib "dw_xtc.dll" version 43 successfully loaded
         shared lib "dw_stl.dll" version 43 successfully loaded
         shared lib "dw_gui.dll" version 43 successfully loaded
    Thu Apr 12 23:42:29 2007
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  3886]
    MtxInit: -2 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: JAVA is not active
    DpShMCreate: sizeof(wp_adm)          6624     (828)
    DpShMCreate: sizeof(tm_adm)          2219848     (11044)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpShMCreate: sizeof(comm_adm)          192000     (384)
    DpShMCreate: sizeof(vmc_adm)          0     (320)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 03970040, size: 2505416)
    DpShMCreate: allocated sys_adm at 03970040
    DpShMCreate: allocated wp_adm at 039717A8
    DpShMCreate: allocated tm_adm_list at 03973188
    DpShMCreate: allocated tm_adm at 039731B0
    DpShMCreate: allocated wp_ca_adm at 03B910F8
    DpShMCreate: allocated appc_ca_adm at 03B95748
    DpShMCreate: allocated comm_adm_list at 03B96EB8
    DpShMCreate: allocated comm_adm at 03B96ED0
    DpShMCreate: allocated vmc_adm_list at 03BC5CD0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 03BC5CF8
    DpShMCreate: allocated wall_adm at 03BC5D00
    Thu Apr 12 23:42:30 2007
    MBUF state OFF
    EmInit: MmSetImplementation( 2 ).
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    Thu Apr 12 23:42:31 2007
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( vyasa) [dpxxdisp.c   9736]
    Thu Apr 12 23:42:33 2007
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    Thu Apr 12 23:42:34 2007
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 6400, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
    DpMsgAdmin: Set patchno for this platform to 43
    Release check o.K.
    Thu Apr 12 23:43:12 2007
    ERROR => W0 (pid 1596) died [dpxxdisp.c   12187]
    ERROR => W1 (pid 1020) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W2 (pid 1820) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W3 (pid 1824) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W4 (pid 1720) died [dpxxdisp.c   12187]
    ERROR => W5 (pid 548) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W6 (pid 1856) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W7 (pid 1904) died [dpxxdisp.c   12187]
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-1596 (SIGUSR2)
    ERROR => DpWpKill(1596, SIGUSR2) failed [dpxxtool.c   2468]
    killing W1-1020 (SIGUSR2)
    ERROR => DpWpKill(1020, SIGUSR2) failed [dpxxtool.c   2468]
    killing W2-1820 (SIGUSR2)
    ERROR => DpWpKill(1820, SIGUSR2) failed [dpxxtool.c   2468]
    killing W3-1824 (SIGUSR2)
    ERROR => DpWpKill(1824, SIGUSR2) failed [dpxxtool.c   2468]
    killing W4-1720 (SIGUSR2)
    ERROR => DpWpKill(1720, SIGUSR2) failed [dpxxtool.c   2468]
    killing W5-548 (SIGUSR2)
    ERROR => DpWpKill(548, SIGUSR2) failed [dpxxtool.c   2468]
    killing W6-1856 (SIGUSR2)
    ERROR => DpWpKill(1856, SIGUSR2) failed [dpxxtool.c   2468]
    killing W7-1904 (SIGUSR2)
    ERROR => DpWpKill(1904, SIGUSR2) failed [dpxxtool.c   2468]
    NiWait: sleep (10000 msecs) ...
    NiISelect: timeout 10000 ms
    NiISelect: maximum fd=1661
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 12 23:43:22 2007
    NiISelect: TIMEOUT occured (10000 ms)
    dump system status
    Workprocess Table (long)               Thu Apr 12 18:13:22 2007
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     1596 Ended         no      1   0             0                                                             
    1 DIA     1020 Ended         no      1   0             0                                                             
    2 UPD     1820 Ended         no      1   0             0                                                             
    3 ENQ     1824 Ended         no      1   0             0                                                             
    4 BTC     1720 Ended         no      1   0             0                                                             
    5 BTC      548 Ended         no      1   0             0                                                             
    6 SPO     1856 Ended         no      1   0             0                                                             
    7 UP2     1904 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Thu Apr 12 18:13:22 2007
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    3
    2000
    10
    10
    --------++++--
    +
    DIA
    6
    6
    2000
    6
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          14
    wake_evt_udp_now     0
    wake events           total     9,  udp     8 ( 88%),  shm     1 ( 11%)
    since last update     total     9,  udp     8 ( 88%),  shm     1 ( 11%)
    Dump of tm_adm structure:               Thu Apr 12 18:13:22 2007
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    RM-T8, U9,     , vyasa, 23:43:11, M0, W-1,     , 1/0
    Workprocess Comm. Area Blocks               Thu Apr 12 18:13:22 2007
    =============================
    Slots: 300, Used: 2, Max: 1
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    1
    DISPATCHER
    -1
    WPCAAD001
    NiWait: sleep (5000 msecs) ...
    NiISelect: timeout 5000 ms
    NiISelect: maximum fd=1661
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 12 23:43:27 2007
    NiISelect: TIMEOUT occured (5000 ms)
    Shutdown server ...
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes...
    Stop gateway
    killing process (1592) (SOFT_KILL)
    Stop icman
    killing process (1604) (SOFT_KILL)
    Terminate gui connections
    send SHUTDOWN to REM TM 8
    blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/8
    LOCK WP ca_blk 2
    return errno (-17) to T8
    errormsg without overhead: take mode 0
    NiBufIAlloc: malloc NiBufadm, to 0 bytes
    try to send 14 to M0
    NiBufSend starting
    NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
    REL WP ca_blk 2
    set status of T8 to TM_DISCONNECTED
    NiSelClear: removed hdl 7 from selectset
    DpDelSocketInfo: del info for socket 7 (type=3)
    NiBufClose: clear extensions for hdl 7
    NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 7 / socket 1492
    dp_tm_adm[8].stat = DP_SLOT_FREE
    DpGetSchedule: next schedule 1176401612
    DpGetSchedule: no schedule found
    DpITmSlotRelease: release slot 8
    DpListInsert: insert elem 8 into tmadm_free_list (at begin)
    DpListInsert: 193 elems in tmadm_free_list
    DpListRemove: remove elem 8 from tmadm_inuse_list
    DpListRemove: 8 elems in tmadm_inuse_list
    [DpProcDied] Process lives  (PID:1592  HANDLE:1632)
    waiting for termination of gateway
    NiWait: sleep (1000 msecs) ...
    NiISelect: timeout 1000 ms
    NiISelect: maximum fd=1661
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Apr 12 23:43:28 2007
    NiISelect: TIMEOUT occured (1000 ms)
    [DpProcDied] Process died  (PID:1592  HANDLE:1632)
    [DpProcDied] Process died  (PID:1604  HANDLE:1624)
    DpHalt: cancel all lcom connections
    MPI CancelAll 2 -> 0
    MPI DeleteAll 2 -> 0
    NiIMyHostName: hostname = 'vyasa'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 163 bytes
    NiBufSend starting
    NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name          -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9962]
    NiBufSend starting
    NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiSelClear: removed hdl 3 from selectset
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/8
    LOCK WP ca_blk 2
    make DISP owner of wp_ca_blk 2
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
    MBUF component DOWN
    NiBufClose: clear extensions for hdl 3
    NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
    NiICloseHandle: shutdown and close hdl 3 / socket 1640
    MsIDetach: detach MS-system
    EsCleanup ....
    ***LOG Q05=> DpHalt, DPStop ( 1544) [dpxxdisp.c   8495]
    Good Bye .....

    Dear Mr.Rafael Toshiaki ,
    Sorry for the late reply. Please guide me to solve this issue.
    Thanks in advance.
    Sreevidya.
    trc file: "dev_w0", trc level: 1, release: "640"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, M
    B 
    B Fri Apr 13 23:40:29 2007
    B  create_con (con_name=R/3)
    B  Loading DB library 'F:\usr\sap\HUM\SYS\exe\run\dboraslib.dll' ...
    B  Library 'F:\usr\sap\HUM\SYS\exe\run\dboraslib.dll' loaded
    B  Version of 'F:\usr\sap\HUM\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
    B  New connection 0 created
    M systemid   560 (PC with Windows NT)
    M relno      6400
    M patchlevel 0
    M patchno    43
    M intno      20020600
    M make:      multithreaded, ASCII
    M pid        3780
    M
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3780) [dpxxdisp.c   1160]
    I  MtxInit: -2 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: JAVA is not active
    M 
    M Fri Apr 13 23:40:30 2007
    M  DpShMCreate: sizeof(wp_adm)          6624     (828)
    M  DpShMCreate: sizeof(tm_adm)          2219848     (11044)
    M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    M  DpShMCreate: sizeof(comm_adm)          192000     (384)
    M  DpShMCreate: sizeof(vmc_adm)          0     (320)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 03970040, size: 2505416)
    M  DpShMCreate: allocated sys_adm at 03970040
    M  DpShMCreate: allocated wp_adm at 039717A8
    M  DpShMCreate: allocated tm_adm_list at 03973188
    M  DpShMCreate: allocated tm_adm at 039731B0
    M  DpShMCreate: allocated wp_ca_adm at 03B910F8
    M  DpShMCreate: allocated appc_ca_adm at 03B95748
    M  DpShMCreate: allocated comm_adm_list at 03B96EB8
    M  DpShMCreate: allocated comm_adm at 03B96ED0
    M  DpShMCreate: allocated vmc_adm_list at 03BC5CD0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 03BC5CF8
    M  DpShMCreate: allocated wall_adm at 03BC5D00
    X  EmInit: MmSetImplementation( 2 ).
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Fri Apr 13 23:40:31 2007
    M  calling db_connect ...
    C  Got ORACLE_HOME=F:\oracle\hum\920 from environment
    C  Client NLS settings: AMERICAN_AMERICA.WE8DEC
    C  Logon as OPS$-user to get SAPHUM's password
    C  Connecting as /@HUM on connection 0 ...
    C  Attaching to DB Server HUM (con_hdl=0,svchp=06EB4ADC,svrhp=037D3524)
    C 
    C Fri Apr 13 23:40:35 2007
    C  *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
    [dboci.c      3514]
    C  *** ERROR => CONNECT failed with sql error '12154'
    [dbsloci.c    9750]
    C  Try to connect with default password
    C  Connecting as SAPHUM/<pwd>@HUM on connection 0 ...
    C  Detaching from DB Server (con_hdl=0,svchp=06EB4ADC,srvhp=037D3524)
    C  Attaching to DB Server HUM (con_hdl=0,svchp=06EB4ADC,svrhp=037D3524)
    C 
    C Fri Apr 13 23:40:40 2007
    C  *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
    [dboci.c      3514]
    C  *** ERROR => CONNECT failed with sql error '12154'
    [dbsloci.c    9750]
    B  ***LOG BV3=> severe db error 12154     ; work process is stopped [dbsh#2 @ 1195] [dbsh    1195 ]
    B  ***LOG BY2=> sql error 12154  performing CON [dblink#1 @ 419] [dblink  0419 ]
    B  ***LOG BY0=> ORA-12154: TNS:could not resolve service name [dblink#1 @ 419] [dblink  0419 ]
    M  ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1269]
    M  in_ThErrHandle: 1
    M  *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9413]
    M 
    M  Info for wp 0
    M 
    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server vyasa_HUM_09 on host vyasa (wp 0)
    M  *  ERROR       tskh_init: db_connect
    M  *
    M  *  TIME        Fri Apr 13 23:40:40 2007
    M  *  RELEASE     640
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        9589
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  252]
    M  Entering ThSetStatError
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3780) [dpnttool.c   357]

  • Dispacher not getting Started...SAP ECC 6.0 on Win2K3 and Oracle.

    HI Experts,
    I have installed SAP ECC 6.0 (OS-Win2003sp2 DB-Oracle10g). Installation was successful, I have also logged in and created a user in SU01. But when I restart the system I am not able to up the sapserver. SAP MMC - dispacher is not starting. I have started OracleListener in service.sap and restarted the system. Un-installed and again installedj2sdk1.4.2_12 and restarted the system...No use, still dispatcher is not getting up....Pls find below paster Developer Trace for Dispatcher....
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        PRD
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    111
    intno      20050900
    make:      multithreaded, Unicode, optimized
    pid        2200
    Wed Oct 28 09:26:27 2009
    kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ****
    ***LOG Q00=> DpSapEnvInit, DPStart (00 2200) [dpxxdisp.c   1239]
    *     shared lib "dw_xml.dll" version 111 successfully loaded*
    *     shared lib "dw_xtc.dll" version 111 successfully loaded*
    *     shared lib "dw_stl.dll" version 111 successfully loaded*
    *     shared lib "dw_gui.dll" version 111 successfully loaded*
    *     shared lib "dw_mdm.dll" version 111 successfully loaded*
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Wed Oct 28 09:26:32 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds*
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >sap_PRD_00                              <
    DpShMCreate: sizeof(wp_adm)          18672     (1436)
    DpShMCreate: sizeof(tm_adm)          4232256     (21056)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
    DpShMCreate: sizeof(comm_adm)          528064     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1536)
    DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06810040, size: 4892312)
    DpShMCreate: allocated sys_adm at 06810040
    DpShMCreate: allocated wp_adm at 06812090
    DpShMCreate: allocated tm_adm_list at 06816980
    DpShMCreate: allocated tm_adm at 068169B0
    DpShMCreate: allocated wp_ca_adm at 06C1FDF0
    DpShMCreate: allocated appc_ca_adm at 06C25BB0
    DpShMCreate: allocated comm_adm at 06C27AF0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 06CA89B0
    DpShMCreate: allocated gw_adm at 06CA89F0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 06CA8A20
    DpShMCreate: allocated wall_adm at 06CA8A28
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 511 blocks reserved for free list.
    ES initialized.
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 2404
      argv[0] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = E:\usr\sap\PRD\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=1048
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=PRD
      argv[7] = -DSAPMYNAME=sap_PRD_00
      argv[8] = -DSAPPROFILE=E:\usr\sap\PRD\SYS\profile\PRD_DVEBMGS00_sap
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1629]
    Wed Oct 28 09:26:33 2009
    ***LOG Q0K=> DpMsAttach, mscon ( sap) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >sap_PRD_00                              <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
    Wed Oct 28 09:26:34 2009
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 111
    Release check o.K.
    DpJ2eeLogin: j2ee state = CONNECTED
    Wed Oct 28 09:26:51 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
    ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1444*
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1063) [nixxi.cpp    4248]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2404)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]*
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Wed Oct 28 09:27:13 2009
    ERROR => W0 (pid 2412) died [dpxxdisp.c   14441]*
    ERROR => W1 (pid 2420) died [dpxxdisp.c   14441]*
    ERROR => W2 (pid 2428) died [dpxxdisp.c   14441]*
    ERROR => W3 (pid 2436) died [dpxxdisp.c   14441]*
    ERROR => W4 (pid 2444) died [dpxxdisp.c   14441]*
    ERROR => W5 (pid 2452) died [dpxxdisp.c   14441]*
    my types changed after wp death/restart 0xbf --> 0xbe
    ERROR => W6 (pid 2460) died [dpxxdisp.c   14441]*
    my types changed after wp death/restart 0xbe --> 0xbc
    ERROR => W7 (pid 2468) died [dpxxdisp.c   14441]*
    my types changed after wp death/restart 0xbc --> 0xb8
    ERROR => W8 (pid 2476) died [dpxxdisp.c   14441]*
    ERROR => W9 (pid 2484) died [dpxxdisp.c   14441]*
    ERROR => W10 (pid 2492) died [dpxxdisp.c   14441]*
    my types changed after wp death/restart 0xb8 --> 0xb0
    ERROR => W11 (pid 2500) died [dpxxdisp.c   14441]*
    my types changed after wp death/restart 0xb0 --> 0xa0
    ERROR => W12 (pid 2508) died [dpxxdisp.c   14441]*
    my types changed after wp death/restart 0xa0 --> 0x80
    DP_FATAL_ERROR => DpWPCheck: no more work processes*
    DISPATCHER EMERGENCY SHUTDOWN ****
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1577
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Oct 28 09:27:23 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Wed Oct 28 03:57:23 2009
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     2412 Ended         no      1   0        0                                                                         
    1 DIA     2420 Ended         no      1   0        0                                                                         
    2 DIA     2428 Ended         no      1   0        0                                                                         
    3 DIA     2436 Ended         no      1   0        0                                                                         
    4 DIA     2444 Ended         no      1   0        0                                                                         
    5 DIA     2452 Ended         no      1   0        0                                                                         
    6 UPD     2460 Ended         no      1   0        0                                                                         
    7 ENQ     2468 Ended         no      1   0        0                                                                         
    8 BTC     2476 Ended         no      1   0        0                                                                         
    9 BTC     2484 Ended         no      1   0        0                                                                         
    10 BTC     2492 Ended         no      1   0        0                                                                         
    11 SPO     2500 Ended         no      1   0        0                                                                         
    12 UP2     2508 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Wed Oct 28 03:57:23 2009
    ===========================
    --------++++--+
    |  Typ |    now |   high |    max | writes |  reads |
    --------++++--+
    | NOWP |      0 |      2 |   2000 |      6 |      6 |
    --------++++--+
    |  DIA |      5 |      5 |   2000 |      5 |      0 |
    --------++++--+
    |  UPD |      0 |      0 |   2000 |      0 |      0 |
    --------++++--+
    |  ENQ |      0 |      0 |   2000 |      0 |      0 |
    --------++++--+
    |  BTC |      0 |      0 |   2000 |      0 |      0 |
    --------++++--+
    |  SPO |      0 |      0 |   2000 |      0 |      0 |
    --------++++--+
    |  UP2 |      0 |      0 |   2000 |      0 |      0 |
    --------++++--+
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     8,  udp     7 ( 87%),  shm     1 ( 12%)
    since last update     total     8,  udp     7 ( 87%),  shm     1 ( 12%)

    Hi,
    Could you please also paste dev_w0 logs ?
    Thanks
    Sunny

  • SAP ECC 6.0 / Active Directory Password synchronization

    Hello,
    We have a need to synchronize our users Windows passwords (AD) to our SAP systems (ECC 6.0, BW 3.5, and SCM 5.0).  We do not use CUA and currently do not use a Portal and are not looking at doing SSO.  We simply want to have one repository (AD) that will manage passwords for our Windows apps as well as our SAP systems.  So far, we have not found a way to do this.  SAP Note 603208 says this kind of synchronizing is not possible due to encryptions, among other things.  However, we did find a white paper that stated the following:
    ~snip
    <i>The Management Agents delivered with MIIS generally support password management: <b>they can take a password from some source (either from a user password change from the Windows interface, or from a self-service web-based password reset interface) and can set the same password in the various connected systems</b>. The Management Agent developed by Oxford is no exception. To change a password in an R/3 System the Susr_User_Change_Password_Rfc function can be used, but this is only possible if the old password is known and the SAP system allows the password change for this user. In cases where the old password is not known (for example the setting of an initial password) the password can be reset using the BAPI_User_change function.</i>~snip
    Does anyone have any information on how we can achieve the password synchronization between Active Directory and Abap-based SAP Systems?
    I very much appreciate your time and help.
    Paul

    Paul,
    You can achieve this using "common authentication". Since Active Directory uses Kerberos, if you allow your SAP systems to support Kerberos authentication as well, then you will be able to logon to Windows workstation, and use the Kerberos credentials issued by Active Directory during this logon to log the user onto SAP.
    This is common, and easy to acheive. You need to use the SNC capability which is provided in SAP GUI and also in SAP ABAP engine, and you also need a GSS-API library for both workstations and for the SAP servers that implements the Kerberos protocol. If your SAP server is running on Windows Servers then you can get this GSS-API library from SAP, but if (like many companies) you are running SAP ECC, BW, SCM etc. on UNIX or Linux servers then you need to license a third-party product which provides the GSS-API library etc. I represent a vendor (CyberSafe) that provides this exact product, but you can also find other vendors by looking on SAP partner website, under SNC certified products list. If you want to find out more about our product, please ask me offline by getting my email address from my business card.
    I hope this helps. Of course, if there are any questions for me related to this which are appropriate for public viewing then please ask them via this forum instead of via email.
    Regards,
    Tim

  • ITS is not working after the Upgrade to SAP ECC 6.0

    Hi Folks
    ITS is not working as it supposed to be after upgrading to SAP ECC 6.0
    When I try to connect thru ITS i m getting HTTP 404 and HTTP 500 Errors
    Can some one throw some ideas.
    But web AS is running perfectly alright.
    Thanks
    Jay

    Hi Priya,
    You need to Implement the following SNOTE's for these changes.
    Union Budget 2015: As per Finance Bill 2015, the Government has implemented amendments to existing sections and introduced new sections in the Income Tax Act. Changes have been made in the following topics:
    Tax Surcharge Rate
    Increase in Conveyance Allowance
    Section 80
    Sukanya Samriddhi Scheme: The Government has launched this new deposit scheme for the minor girl child. This is a savings scheme that can be opened by the natural (biological) or legal guardian of a girl child aged below 10 years. Related Notes:
    2139208 - Union Budget Changes – 2015
    2138605 - Sec80C: Sukanya Samriddhi Scheme
    Upcoming Developments:
    PF Admin Charges Revision
    Professional Tax for Mizoram & Nagaland states
    Average Rate of Tax
    Regards,
    Venkat Polisetty

Maybe you are looking for

  • Apple TV - with Adobe Lightroom or Photoshop Elements

    With Apple Aperture being phased out and iPhoto being replaced, are the adobe products a good alternative if you use Apple TV for much of your photo viewing?  Of the two Adobe products not sure which is the closest match to being an Aperture alternat

  • Macbook can't see time capsule through airport utility; powerbook can.

    This question probably applies to Airport Extremes as well as Time Capsules, but I happened to see it with a new TC. My Time Capsule came in yesterday. My plan was to bridge it into my existing network to serve 802.11n over 5ghz. I did the initial se

  • Trouble with iPhoto recently.

    First, it has taken to hanging after a minute or so as it tries to "sync albums with Facebook". Then I lost all my thumbnails. I rebuilt everything at least once, got most thumbnails back, except the ones associated with RAW files. Nothing seems to b

  • HT1454 Is it possible to use my ipod touch to use Facetime on my HDMI ported TV?

    Is it possible to use my ipod touch with a HDMI adapter, to talk and use FACETIME on my TV, that has a HDMI connection?

  • Any way to sync iCal notes w/ Nokia phone?

    I was pretty bummed to learn that even though my Nokia syncs perfectly with iCal and Address Book, it completely ignores the notes attached to my appointments and To-Do items. This is a major bummer. Is there any solution? I did find a widget that al