SX-10 and SX-20 input microphone ( secondary input )

Hello,
I check the specs for the SX-20 that we already integrate with an external micrpphone mixer and work well. It tell 1/8'' 4 contact.
On the specs of the SX-10 there is also a 1/8'' 4 contact but they add ( only Cisco TelePresence Table Microphone 20 ) in the litterature that it's not tell in the sx-20 litterature.
My question is. the 1/8'' on the SX-10 is it the same than the SX-20 to be able to use external audio mixer
thanks
Carl

The SX10 is not designed as an "integrator" endpoint, so is not officially supported with other input sources, but, yes, it is the same connector and pinout as on the SX20 and could be used with an external audio mixer, although, as mentioned, this is not a Cisco supported configuration.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Similar Messages

How to switch between primary and secondary input ...

Hey guys ,
I have Nokia 6700 Slide
I have to write SMS's in two languages so I need to switch between secondary and primary input language put the way I know is boring and inefficient so that if anybody know a shortcut that help to switch between the primary and the secondary input language that will be awesome .
thanks

when writing text ,To change the
writing language, select Options >
Input options > Writing language
or refer to page 28
http://www.google.ie/url?sa=t&source=web&cd=2&ved=0CB8QFjAB&url=http%3A%2F%2Fnds1.nokia.com%2Ffiles%...
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Adjust input/microphone volume?

Hey, I use the "Recorder" app for a few things. I would like to be able to adjust the input volume so that some of the louder things that I record are not overloaded/clipped/distorted if possible. There is not an option in the Recorder app itself. Is there some other way to adjust the iPhones input/microphone volume?

Hi, I'm facing a similar problem. The kAudioSessionProperty_CurrentHardwareInputVolume property is "read-only" and does not allow to set it. Please let me know if you get to know how to resolve this.
Thanks

Can the microphone jack input be configured for a stereo signal from a tape deck without overloading

Can the Microphone jack input on the HP Pavilion dv6 be configured to take in a stereo signal from a tape deck without overloading the microphone jack, i.e., so it acts as a Line In jack?. The jack is too sensitive to accept the typical signal from a tape deck or stereo tape out jack from an audio receiver, and the incoming sound is overloaded and distorted. Also, connecting from a stereo receiver headphone jack so the level can be controlled to the laptop microphone jack lowers the signal strength but contains a lot of background hum. Any way to configure the microphone jack to have it work as a line in jack?

There're two ways to connect it. One is through the digital output ( which is the same as the front line out on the Audigy and is a different jack on the Audigy 2 series ) or through the front line out.
In either case, you need a stereo mini-plug to phono x 2 connector adapter cable.
In the case of a digital connection, only one of the plugs will carry the signal. For analogue connections, simply plug the two phono outputs into the L/R phono inputs on yer receiver.

In iCal - I keep getting the error message " This calendar was created by Mail" and it will not accept any input; why..??

In iCal - I keep getting the error message “ This calendar was created by Mail” and it will not accept any input; why..??

use Disk Utility and Verify Permisions then fix and Verify Disk and fix, this should fix it.

My iPhone 4 is running ios 7.0.4. I have a slightly eccentric back story to all of this; but basically i set a secondary entry passcode on my phone and i have forgotten the secondary passcode; it appears as though i no longer have the opportunity to enter

my iPhone 4 is running ios 7.0.4. I have a slightly eccentric back story to all of this; but basically i set a secondary entry passcode on my phone and i have forgotten the secondary passcode; it appears as though i no longer have the opportunity to enter the code after too many failed attempts -- "iphone is disabled, connect to itunes." i have connected to itunes on itunes on both 11.1 and 11.3 versions (my computer says 11.1 is the minimum requirement for my phone to sync) and attempted to restore my phone; THE RESULTING MESSAGE: "The iPhone 'iPhone' could not be restored. This device isn't eligible for the requested build." HOW THE HECK DO I GAIN ENTRY TO MY PHONE AGAIN AND GET SOME USE OUT OF IT. IT DID COST $$$ TO BUY. PLZ HELP!

Hey there Jachin W.,
It sounds like you are unable to connect to your home Wi-Fi suddenly on 2 different iOS devices. I would be interested to know if the affected phones are able to connect to a different Wi-Fi connection, but barring that I would use the following article to help troubleshoot the devices and the Wi-Fi connection:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
And this section from toward the bottom if needed:
Unable to connect to a Wi-Fi network
Verify that you're attempting to connect to your desired Wi-Fi network.
Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Thank you for using Apple Support Communities.
All the best,
Sterling

When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

When I skype, and take videos, my microphone doesn't work. I know it's on but my friends can't hear me. How do I get it to work?

I'm sure you have checked, but make sure your mute button on the keyboard is not on , also check that you haven't touched the space bar during a call as that mutes it.
Check your settings in Skype>Preferences, Audio/Video tab. Here's what mine look like:

Functions are not using default and will not validate without direct input

Hi. I am recreating all of our mappings (from 9.0 to 11g). And I am finding that any function that does not have a direct input for every input variable (rather than using the defaults as defined in the function) no longer will validate in OWB. It states that the input parameter is required but is not connected.
I have worked around this so far by adding Constants to pass the default values. I tried setting the default value in the property inspector window for each specific input parameter and this did not work, I still get the same error.
Is there a way to fix this? i am not happy with having to add all these constants, and I don't see why it is not using the defaults that are defined in the functions themselves. Any help is appreciated.
Thanks,
Kaisha

By the way for anyone who is curious....
The reason that the functions and sp's weren't working correctly was because I had movedthem into the new DB wrapped. I don't know why it caused this but when I did dbms_metadata and replaced them all unwrapped, and then reimported them into OWB all the mappings compiled.
K

BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network

I'm trying to create an "ExtraLarge" VM with multiple NICs. The New-AzureVM returns the following error:
BadRequest: Virtual machines with secondary network interfaces and virtual machines with no secondary network
interfaces are not supported in the same deployment, also a virtual machine having no secondary network interfaces
cannot be updated to have secondary network interfaces and vice-versa.
But I have no other VMs. Or at least I did and then deleted them and all their disks. The service has no deployments (either staging or production).
Why is New-AzureVM complaining about a mismatch of VMs with and without secondary network interfaces when no other VMs exist?
I have tried many things to fix this, including the deletion of ALL of my resources. I have deleted and created the service many times, both with an affinity group and without. I have a screen print of the -debug output if your interested.
Thanks for the outstanding help.

Hi Ron,
IMPORTANT NOTE: Please do not post the CONFIDENTIAL DETAILS ever on the public forums, this is HIGH RISK action.
Please send an email with your contact details to my email
[email protected] so that I guide you on steps which help you come out of the current scenario. Thank you for understanding.
I suggest you to create a new VNET and new VM with cloud services. Create Multiple NIC VM. Let us know the results.
Ref:
http://azure.microsoft.com/blog/2014/10/30/multiple-vm-nics-and-network-virtual-appliances-in-azure/
http://blogs.technet.com/b/canitpro/archive/2014/11/04/step-by-step-create-a-vm-with-multiple-nics-in-azure.aspx
If you are unable to create a VM with multiple NIC, please open a support case as it requires more confidential information which is out of scope of FORUM support offerings.
Regards,
Girish

Is it possible to get both a 3,5mm headphone jack and a 3,5mm microphone jack?

Hey!
I recently bought a headset for my 2012 MacBook Air, and it came with two cables. One for sound (green) and one for the microphone (pink). The MBA has only got one 3,5mm jack though, so i was just wondering if its possible to use a normal 3,5mm splitter to get both? If so, can i just use a cheap one from DealExtreme?
Thanks :)

I would not try it, the device was not designed for this and it could destroy the electronics.

Just downloaded iOS 5 and can't get "reminders" to input new reminder

Just downloaded iOS 5 and can't get "reminders" to input new reminders

I was having the same problem. I followed the directions from the link you listed, but the library file in the Previous folder was dated the same as the date of my upgrade. There are no other files in that folder. I tried anyway but it did not work. Any suggestions short of individually adding them?

Dynamically passing text and url-based images as an input parameter to cf8 report builder

I'm unsuccessfully trying to dynamically pass text and url-based images to a group footer or the detail section via an input parameter or even hardcoded. The field has the attribute 'XHTML Text Formating' set to True. The following are failed samples of a simplified value:
"<img height=’300’ alt=’Document’ width=’300’ src=’http://www.google.com/intl/en_ALL/images/logo.gif’ />"
or
"<img src=’http://www.google.com/intl/en_ALL/images/logo.gif’ />"
This just results in the above text being output. The end result would have various text and images from a database as input by a user, thus the reason I cannot just use the hyperlink information attribute as I could if it were a single known image. I tried rtf and pdf report types. Ideas?

HTH,
Thanks. I'll keep that in mind, although I don't know how many images my user might need or what sizes so that might be tricky.
Since my target output is rtf so that MS Word can be used to edit the result, I added a pagebreak to a MS Word doc and used the resulting html source to replace the rich text editor source code for the page break, but that did not help either. The page break was so a user could add an image later. Something is wrong with the Report Builder related to intepreting XHTML, especially anything that has an attribute, including URL-based image links. I hope they try to provide another update before CF9. I doubt my client will be going to CF9 for some time, since they are just completing the migration to CF8.
BrianO

Can anyone explain to me why sometimes my ipad2 locks up and won't respond to any input from the keyboard.

My iPad 2 locks up sometimes and won't respond to any input from the keyboard. Have to reboot in order to fix the problem.

You have 3 choices:
1. Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data.
2. Restore from backup using iTunes
3. Restore as new without the backup

I have transefer function like (1/(s^2+s+5)) and i have a square wave input , i want to use this transfer function with this input to see the output , how can i do that , with example please.

i need to know also how to represent this transfer function in labview, try to send me example. answer me at my mail

"st" wrote:
> answer me at my mail
give a valid e-mail first, and your name, we don't like to help anonymous
people
> try to send me example.
how much do you pay ?
> i have transefer function like (1/(s^2+s+5)) and i have a square wave
> input , i want to use this transfer function with this input to see
> the output , how can i do that
First you have to know what you are doing, like an engineer : you have a
Laplace, continuous time transfer function but LabView handles discrete
signals only. Use matlab/simulink if you want to simulate continuous time
systems easily...
If you definitely want to use LabView, the first step is to discretize your
continuous-time transfer function, i.e. decide a sampling rate and convert
it to a "z transfor
m". Then you can directly use the "IIR Filter.vi" as I
said earlier.
Philippe Guglielmetti - www.dynabits.com me at my mail

How do I delete Yahoo email account I no longer use in iCloud and add gmail as my secondary iCloud account on my Mac Pro laptop and iPhone 4s? I have OS X Yosemite on my laptop and latest version on iPhone. I'm not particularly computer literate; ple

How do I delete Yahoo email account I no longer use in iCloud and add gmail as my secondary iCloud account on my Mac Pro laptop and iPhone 4s? I have OS X Yosemite on my laptop and latest version on iPhone. I'm not particularly computer literate; please respond accordingly.

You can do this at My Apple ID

SX-10 and SX-20 input microphone ( secondary input )

Similar Messages

Maybe you are looking for