Sx10 auto focus not working

I have an SX10 I am evaluating for rollout but the unit I purchased does not focus properly. When auto focus is enabled, it tries to focus for several seconds, then stops before completing the focus. I tried setting it to manual focus but there is no obvious manual focus mechanism on the device.
Is the SX10 I have faulty or is there some trick to getting the auto focus feature to completely focus instead of the current half focus it does.

Hello Dave -
I have an SX10 in my office and I haven't seen anything wrong with it not focusing correctly on me.  Is there anything, even the littlest thing between the camera and yourself that is in the view of the camera that it could be focusing on instead?  For instance, mine is sitting on top of a table, and if I have the camera pointed down far enough to where it sees the table top, it will pick up and focus in on the edge of the table and not me that is farther away in the image.

Similar Messages

  • Lumia 620 auto focus not working?

    im using lumia 620 .recently ive updated with new os and after that its camera auto focus is not working....every time i capture somthing gives blurry image...how can i solve this problem..?

    Have you checked your settings?
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • MHs-TS20 Auto Focus not working???

    For some reason the Auto Focus is not working on my Bloggie. Any ideas?

    If there are focusing issues in picture taking, keep in mind that you have to half press the shutter button to allow the bloggie to focus properly. The camera may have a hard time focusing on low light situations, subjects with less contrast or moving objects.
    It is normal that the camera may record blurry or unclear videos in low light. If the issue persists or happens in situations with ample light, you may reset the bloggie by holding down the power button for at least 7 seconds.
    If this post answers your question, please mark it "Accept as Solution."

  • E71 Camera Auto Focus Not Working

    Dear Sir/Madam, Please help me out of this confusion. I wanted to know whether E71 model have Auto Focus feature in Camera, if yes the my mobile don't have that one. I recently purchased this model  just 4 months before and the camera quality is not good also.

    Hi Joshymathew
    How about pressing the "T" key?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • IPhone 3Gs camera-auto focus not working; no focus instead

    Just got a new iPhone 3Gs. Wanted to test the camera since I hear it's so much better. The image never focuses. At first a box appears, dead center, like it should, but it doesn't focus. When I tap on the screen a box appears where I tapped, so it's responsive in that respect. But again, doesn't focus there.
    Help! I haven't used it yet -- is there a setting I need to set or something else I need to do (calibrate?) to get it to work?

    Do you have enough light for a photo? Have you tried taking a picture, and seen that it is out of focus (as opposed to fuzzy because you didn't hold it steady enough)? Is the lens clean?

  • Auto brightness not working in ios6

    I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

    Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
    I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
    I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
    Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

  • AUto attendant not working

    Auto attendant not working .....
    If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
    Is there Option to set
    Please press the extension which you want to Call ...
    Eg: if i press 222 that time it should ring the 222 extension
    Please help this is the first time i am working on this stuff
    If i chnage the scrpt file then i can hear auto attendant not initiazlised..  please find the attched screen shot and back file for more details.
    Best Regards
    Shabeel

    Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
    Check also the Calling Seach Space
    GW should be able to reach CTI Route Point and CTI ports partition.
    If you try other extension it works fine?

  • Auto keyframe and auto transition not working

    auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

    In order to use these you need to have the autokey frame and transition selected
    OFF   ON
    and have the first key checked then move the playhead to the new position and it should add the transition.
    Did you try this and it is not working?.

  • Auto dial not working

    Auto dial not working
    I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
    In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
    Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
    I must have inadvertently changed some setting.
    Skype works, MagicJack works, but I must dial the number manually.
    I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
    To say the least, I am frustrated because it must be something obvious. (to everyone else!)
    Any ideas as to how to how I can get it to dial automatically again?
    Thanks for any assistance.

    IPAD user guide for IOS 8 is available on line at apple -
    you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
    http://support.apple.com/manuals
    Handoff is only for using with multiple devices - Iphone/Ipad/ipod
    This is the bit in Handoff on Phone calls
    Phone calls
    If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
    Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
    Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
    You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

  • Auto brightness not working on iPhone 5?

    On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
    Anyone else have this problem of the auto brightness not working?

    There is nothing wrong with the auto brightness.
    When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
    If you have the slider too high the brightness cant reduce because youre not letting it.
    Set your brightness at about 25% and you'll see what I mean.

  • Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

    Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

    Hello SajidChaudhary,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Have a nice day,
    Mario

  • Office 2013 Auto Archiving not working

    Dear Sir / Madam,
    We are using MS OFFICE 2013 with Windows 8.
    Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
    We have defined all the steps required to do Auto Archiving.
    Your help is required in this since we have tried all the options.
    Paloli Manoj

    Hi,
    What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
    If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
    http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
    For more troubleshooting steps, please refer to this:
    http://www.howto-outlook.com/faq/archivenotworking.htm
    Regards,
    Steve Fan
    TechNet Community Support

  • Auto Blend not working?

    Just downloaded Photo shop cc 2014 and Auto Blend will not work? It will not blend the pictures into focus! please help

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Yoga 2 Pro tent mode and auto-rotate not working

    I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
    When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
    Auto-rotate does not work at all now. The screen is un-locked.

    Dear NX3
    Welcome to Lenovo forums
    Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
    http://support.lenovo.com/us/en/downloads/ds038767
    Thanks
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Auto resolve not working for cached outlook

    We recently migrated from Exchange 2007 to 2010. One thing we have noticed is that auto resolve (to alias name) is not working for Outlook in cached mode.  Not in cached mode or via owa, it seems to work fine.

    Hi,
    Does the issue happen to all users or some specific users?
    Please check whether the issue happens in Outlook Online mode. If the issue only happens in Cached mode but not in Outlook Online mode, please create a new Outlook profile to have a try.
    If it doesn't work, please restart Microsoft Exchange File Distribution service in Exchange 2010 and Exchange 2007 then click Send/Receive > Send/Receive groups > Download Address Book to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

Maybe you are looking for