Sx20is--only blue registers in manual mode. Color okay in auto

In manual mode the only color in the image is blue. In auto mode the color is fine.

Check the white balance setting. You are probably set in the tungsten mode, so try a different setting to see if things change. The easiest thing would be to set the camera to Auto White Balance and take a few photos. Use the setting that is the closest to the actual conditions that you are shooting in.
To find the white balance, press the func/set button and scroll through the menus until you are at White Balance.
Steve M.

Similar Messages

Legend in manual mode - Background color

Hi all,
To create legend in manual mode I am using following request URL for a style image.
http://127.0.0.1:8988/mapviewer/omserver?sty=L.ROAD&w=20&h=20&ds=cescdatasource
Here if the color of style is white (For example white color line style) then it won't be visible. Can I set background color?. I need different background color instead of white.
Thanks,
Sujnan

Either set the background color for the MapDecoration or for the table in which you display the legend or both.
e.g. (modification of tutorial 36 Map Legend)
// get the container DIV and set the background color to light blue
var legendDiv = legend.getContainerDiv();
legendDiv.style.backgroundColor = "AliceBlue"; //color name may not work in all browsers
function buildLegend(baseURL)
var html = "<table *bgcolor='gray'* border=0> <tr><td><img src="+baseURL+"/omserver?sty=L.PH&w=45&h=20&ds=mvdemo></td><td> Highways </td></tr>" +
" <tr><td><img src="+baseURL+"/omserver?sty=M.CITY+HALL+3&w=20&h=20&ds=mvdemo></td><td> Cities </td></tr>" +
"</table>";
return html;
}

When I try to set the automatic time zone on my iPad in Settings all I get is the "waiting" wheel constantly turning. The only way to set the time is in the manual mode. Does anyone else have this problem? Thanks!

When I try to set the automatic time zone on my iPad wi-fi mini in Settings all I get is the "waiting" wheel constantly turning.
The only way to set the time is in the manual mode.
How to solve this problem?
Thanks!

You must be connected to a good wifi network for it to reach an outside time server.

Color Ipod gets only blue lines when it is turned on ...

For about a month now, my ipod screen switches in and out of an appropriate screen and another time it will light up and have only blue lines going across it... How do I fix this?

Well you can try these The Five Rs, but my guess is it's a hardware fault that requires service.

T3i manual mode failure

T3i works ok in all auto modes and all manual mode when in live view but fails in all manual modes when not in live view.
Mirror flips up but doesn't return for 20 seconds or so and no picture is recorded.
Used to work well in all situations, suddenly developed this trouble. Appreciate your help!
Solved!
Go to Solution.

You have mirror lock up turn on. With Mirror lock up, the first press will flip the mirror up, then the second press will take photo. If you only press once, the mirror will flip up, viewfinder goes dark, and it will release after few seconds. In liveview, mirror is already lock up so this is not applicable.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Can't transfer songs in manual mode

All the instructions say that in manual mode songs can be dragged from the music library and dropped into the iPOD but it won't work. The only way we can transfer is to set the preferences to automatic. Does anyone know how to transfer in manual mode?

Janet,
The songs with the ! next to them means that they have either been moved from the location that iTunes normally looks for them, or that they've been deleted from the computer.
Either way, iTunes cannot find them. If you were to double click on one, you would get a message to this effect and be asked if you want iTunes to look for it.

Help with manual mode of Menu Widget in Muse

I'm building a family web page in Muse and I'd like to create a menu of my secondary webpages only. Since the Menu Widget's "menu type" options are Top Level pages, All Pages (neither option will work for me), and Manual- it seems like I should be able to use "Menu Type: Manual" and simply type in the menu items I would like- which I've done. What I can't figure out is how to link those menu items I manually created to the sub pages of my website.
A bit of background on my website structure. My top Level sites are: Welcome, and then 3 separate pages for each family member- and each member page has a few secondary pages (about, photos, contact):
Welcome
Member 1
about
photos
contact
Member 2
about
photos
contact
Member 3
about
photos
contact
My main site navigation- i.e. the menu widget for top level pages- is above my header (Light Gray). Below my header, I would like a horizontal or bar menu for ONLY the sub pages of that member: ie. About Member 1, Member 1's Photos, Contact Member 1 (Dark Gray)
I've created a menu widget in the Manual mode- I just can't seem to figure out how to link each menu option to the correct page. Currently in preview none of these manual menu items work.
Thanks!
LScarff

Hi Scarff.
When you opt to use manual mode for the Menus, you need to manually link the pages to menu items. To achieve this , you need to have the menu item selected and then using hyperlink option as shown in below screenshots link the corresponding page to it :
I hope this helps.
Regards
Anshul

Can't set to manual mode if it's not listed in iTunes!

Hi,
I'm struggling with this infuriating "feature" where iPods can only be synced with one computer to ensure everything being up-to-date.
I just bought a new computer and want to copy new music to my iPod shuffle (2nd gen).
I don't need auto-syncing, I just want to copy music one-by-one, and I keep getting the Erase and Sync option when I connect the iPod. I've read other threads and it sounds like manual mode is what I need, but once I hit cancel at the Erase and Sync box the iPod doesn't appear in iTunes anywhere for me to change to manual mode! How can I get iTunes to recognize the iPod so I can set it to manual?
The iPod still works fine and I can see the files in My Computer, browse the iPod_Control directory, etc. So I don't think the iPod is broken in any way.
Also I tried editing the preferences in iTunes (I'm on v8 on Windows Vista) to stop auto-syncing with iPods and iPhones (that's an option somewhere in preferences) but it didn't help.
Any ideas!?
Thanks,
Raphi

An iPod shuffle cannot contain music from more than one computer at once; the manual mode referred to is present on other iPod models, but isn't available on the iPod shuffle.
(40957)

How do I set the Shutter Speed in Manual Mode on my EOS 70D

I recently was forced to upgrade to a Canon 70D after my 50D died from a fall. I am not happy with the ease of setting the Shutter speed while in Manual mode. The only way I can currently set the shutter speed while in Manual mode, is to go to the info screen and set the shutter speed with the touch screen. The manual states that I should be able to set the Shutter speed with the Main Dial, behind the shutter release. ( which is how it was on the 50D). I can control the Aperture with the quick control dial. The Function Lock button is off.
I am sure this is do to some setting I have wrong, that is not allowing me to fix this issue, but I cant figure out what it could be after hours on the net and in the manual. I would greatly appreciate it if someone could help me with this issue.
Thanks
Gene

Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
http://www.dpreview.com/forums/thread/2638326

430exII fires twice in Manual mode on radio triggers??????? I need it to stop!

I've been using 430exII on radio recievers and have had no problems until now. I have it set to manual mode, on same channel as transmitter, didn't mess with any custom funcions, but am getting a double burst. How can I stop this?
Solved!
Go to Solution.

Which radio triggers are you using? Not sure how much Canon is going to help with 3rd party triggers.
So it's only happening with one of your flashes? What if you put that trigger on a different flash? That way you can narrow down the flash or the trigger. If it's the trigger I'd start with the battery. Cheap triggers like the Yongnuos act funky when the battery starts to die. I'd also double check your transmitter and receiver contacts, they can make things act up as well. Pull them all the way off, all the way on snug and lock.
If it's the 430 acting up I'm not even sure where to start. Batteries, contacts for corrosion, the usual stuff I guess. See if it works properly on camera. If your transmitter allows a test fire try that manually and see if it still double fires.

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

My Macbook pro often won't start up since I installed Lion, and I have to shut it down using power button. My desktop icons don't appear and the dock won't open. I only have the little circle of color spinning endlessly. What's wrong now!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

After updating to 1.2 then restarted, I have seen only blue screen

I have seen only blue screen after Apple logo startup, and now it is stuck like that. Nothing happen anymore. What a bad luck I am with this new iMac, I have to hand in my assignments in 2 days and I cannot even go to finder. If i can do that at least I will copy them to my old Powerbook. What the @#$%^&*( is happening with new iMac. I also have a bad experience with freezing problem many times a day, and I have made my mind to live with it until now. I cannot do anything unless typing a problem on my old lovely powerbook. Please help me, I need those assignments to submit to my professors.

From the number of posts regarding the same issue with 1.2 and any ipod with a color display (both my ipod nano and video ipod crapped out), there is obviously a serious bug with this "upgrade."
I agree we should give them a chance, but I find it unacceptable that after this amount of time that the Applecare support technicians, up to TIER 3, have never even heard of this issue. They wanted me to return my ipod(s) in for factory service even after I numerously reminded them that they both work perfectly once downgrading to 1.1.1!
I am a long-time apple-geek, but this issue upsets me because it is so uncharacteristic of the standards of excellence Apple has always provided, and smacks of the pervasive frustration we all deal with when using Microsoft products.
......and it is especially frustrating that all of the purchases I excitedly bought once videos are now provided at 640x480 resolution are not playable with version 1.1.
But with version 1.2, the higher resoultion videos are transferable to the ipod, but no videos are playable due to this firmware incompatibilty.
Apple: do you read these discussion forums??

Syncing in Manual Mode with 2 PC's...

I just got a refurbished 30Gb iPod yesterday. I charged it up at work, and manually synced it and it continued to say "do not disconnect" from the start...for hours...even though I only synced maybe 40 songs. I had to disconnect when I shut my computer down. When I got home, I synced it with iTunes manually at home. Got tons of music and videos no problem.
Today when I brought it back to work and plugged it in, it says it's in restore mode. I don't want to restore b/c most of my content is on my PC at home. When I eject the iPod, it's not in restore mode, and it works fine.
Why is the second computer insisting that it needs to be restored when it works fine? Is there a way to avoid this when syncing between 2 PC's?
Dell Windows XP Pro 30Gb iPod - Refurbished

"and manually synced it and it continued to say "do not disconnect" from the start...for hours."
It is operating normally. If you have your iPod in "Manually manage music and videos" mode, the "Do not disconnect" will not go away until you manually eject it.
"Why is the second computer insisting that it needs to be restored"
If you just unplugged it without ejecting it properly, then that could be why it's acting that way, not sure. You may not be able to get around that. I would just make sure that your iPod is backed up on the computer in question, then just restore it as usual, then just put it back to "Manual" mode.

Lost manual control of exposure in Manual mode 5Dmk3

Never changed any settings as far as I know. The day before I was shooting pictures with full manual control in manual mode. I put my camera away and when I picked it up again, Manual mode is now behaving like Automatic mode when trying to shoot pictures. It is auto exposing in the LiveView. I can see the exposure changing in LiveView as I move the camera around and I cannot change the ISO or the aperture. I can bring up the ISO menu and select different ISOs but the image does not change. When I spin the aperture control wheel, the F-Stop number changes on the display, but the blades in the lens do not move and nothing changes.
I still have full manual control when I switch to video mode, this only happens in picture mode.
Here's a short video which shows the issue I am having.
http://youtu.be/kQN-H2Qwsu4
EDIT: Just noticed something. It seems that the camera WILL shoot the picture with the settings I have selected, but will not show what that exposure looks like in the LiveView. When I go into picture mode the aperture stays wide open no matter what I do, I can look into the lens and see that the aperture blades are all wide open. If I set the aperture to F10, the exposure does not change in LiveView and the blades do not move, but when I press the shutter, the blades will jump into place for a split second to take the picture at F10 and then revert back to wide open. Same thing with the ISO. So I guess I do still have manual control, but it's not much good to me if I have no preview of what that exposure looks like in the LiveView.
Solved!
Go to Solution.

Turn on exposure simulation in the shooting menu. It's in the far right red tab, fifth row down.

Using navigation bar in manual mode

Im trying to create a secondary Navigation bar onto a page called 'projects' I have created two child pages on the map called 'selected works' and '2012-13' and when i try to add a navigation bar the only pages that link are the main ones. Is there a way to overcome this? I have tried using the manual mode, however when previewd this hasn't been working.
Many thanks

Hi Philip,
Are the child pages showing up in the menu? What is the "Menu option" for the child pages you have created?
Regards,
Aish

Sx20is--only blue registers in manual mode. Color okay in auto

Similar Messages

Maybe you are looking for