SX80 Visca camera control issues

I'm having issues with my SX80 seeing the visca camera control signal of a Sony SRG-300H. Any experience or tips would be welcomed. Hopefully I have wired them correctly. I used rs-422 to 9 pin d-sub.

It's been asked once before here in the forums already, not sure if will answer your question or help though.
cisco-sx80-using-sony-srg-300hw-cameras

Similar Messages

Camera Control Pro installation issue

Hi,I am not able to install camera control pro on a brand new MacBook. After clicking " easy install " absolutely nothing happens, the disc can't even be ejected. How can I get it to install. I also tried a firewire connection to a computer that did install it and when trying to open it in the MacBook it says that it wasn't installed correctly. Thanks in advance for any help.
(note: at one point everything was transferred from another computer to this macbook and now when starting up there seem to be two systems operating, I have to pick one to log into, I don't know why this happened but could it be related and how can I combine them if so?)

Perhaps you should contact Nikon support for help with their software?
-Doug

Multi Cam Flicker Issue - Premiere Pro CC 2014

Multi Cam Flicker Issue - Premiere Pro CC 2014 can any one help me pls

Hi,
This might help :
Go to File > Project Settings > General and change the Video Renderer to Mercury Playback Engine software only. Click OK and select Delete Previews.
Thanks,
Rameez

How to access SPECIFIC camera attributes tree (camera controls) located in MAX with Labview?

How to access specific camera attributes tree (camera controls) located in MAX with Labview?
I want to be able to access frame, trigger and grab properties. Does anyone know?
Thanks.
/Peter

Please see this related thread http://forums.ni.com/t5/LabVIEW/IMAQdr-Property-Node/m-p/1642950/highlight/false#M590168
Matt
Product Owner - NI Community
National Instruments

5s Volume control issues

Anyone having volume control issues? My wife's 5s (less than a month old) is having issues with the up volume. If she mutes it using the down volume, it won't go back up. I can get it to work if I hold the volume a long time and it eventually comes back. Or last time i had to remove her case, hold the volume and release several times before it finally kicked in. Any thoughts or ideas? Thanks.

Hi,
Please test in other computer to see if the issue persists, it may be caused by the bad output channel.
But for better solution, I recommend you go to MSDN forum for further help.
http://msdn.microsoft.com/en-US/
Thanks for your understanding!
Regards,
Ada Liu
TechNet Community Support

Remote Camera Control and astrophotography for Sony A7(X) and Sony A6000

Hello, Sony makes the best sensors, no doubt about it. Sony makes the best hybryd cameras, that's why i bought a Sony camera BUT ... Astrophotographers are deeply looking at Sony 's camera (especially A7S) because of their astrophotography capabilities but there is a HUGE problem : no software allow BULB mode command, which is very important for astrophotographers. Most of time, astrophotography is some thing like that : 30 pictures, 5 minutes exposure for each picture and we have to add dark frames, flat frames, offset frames and so on. So, if Sony makes a software like Remote Camera Control, why does Sony not include long exposure (over 30s) control in this software ? So come on Mr Sony, don't let Canon leading astrophotographers. Please, add long exposure in your softwares !! Many thanks considering my demand.

I'm going to add that this should be available for ANY alpha series camera that has a bulb mode function in manual control. This includes ,for example, the a5100.

In order to tether a Nikon D7100 into Lightroom is Nikon Camera Control Pro 2 required

I have a Nikon D7100 and I have Lightoom 5. Will Lightroom recognize the D7100 without needing to have Nikon Camera Control Pro 2? If the D7100 is not yet recognized by Lightroom will the Nikon software allow for tethering into Lightoom? when might Adobe add the D7100 to recognized cameras"

No.
The D7100 is not supported for tethering in Lr.
See here: http://helpx.adobe.com/lightroom/kb/tethered-camera-support-lightroom-4.html

As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000 photograph were not catalogued correctly, or hardly at all, so now ov

As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000 photograph were not catalogued correctly, or hardly at all, so now over several months time my photos have apparently been redirected in my libraries and have begun not appearing in their allotted frames next to their number in the library they are in. they also have a small question mark (?) next to the photo space. The frames are blank but indicates that there is a photo there. The majority of photos are blank but about a tenth are seen . i apparently need to retrace where they went but do not know how to get that done . can someone help please?

It would be difficult to tell you where to begin. If you moved photos around to different folders and didn't use Lightroom to move them, that would cause Lightroom to lose track of where they are. You have to remember that your images are not "in" Lightroom. Lightroom simply points to them wherever they are on your computer. All of the location information as well as the changes that you make to your images is stored in the catalog, which is a database. This catalog is central to the operation of Lightroom, and it's essential that you understand how it works and how to make it work for you. For all of those images that have "?" On them, or the folders that have the same, you will have to go through the process of locating them and showing Lightroom where they are located. With 18,000 images, and many of them missing, it might just be easier to start a new catalog and organize things properly from the beginning in that catalog.

Tethered shooting - more camera controls?

It's great to be able to shoot tethered in Lightroom 3, but could more camera controls be included in the tethered panel? At the very least an image rotation tool would be useful; and controls for camera settings like aperture, shutter speed, ISO, white balance etc would be great.
Right now I keep having to revert to the kludge method of using my camera's capture tool and having Lightroom auto-import the images from a watched folder when I need these controls.
Colin Thomas

I have the exact same problem using Windows 7 Home Premium, 64-bit dual-core system with 4G memory on an Acer laptop running Lightroom 4.2
Any help is appreciated.

Legal control Issue - License cannot be used

Hi Team,
The sales order has Legal Control: Issue Error, due to this we are unable to deliver the goods. the below message found in the Log details:
Access object: License Master
Key (license nubmer): xxxxx
Validity period not long enough
Requested delivery date for item: 02/20/2012
End of validity period of license: 1231/2011
License cannot be used
we tried to extend the validity of license but it is not allowing. can anyone give some inputs on this error.
Thanks,
Rajam

Its a SAP GTS related error.
I hope you are aware of the License are created under Legal Control in GTS system.
If I'm not wrong, we can maintain License (GTS) by using TCode /SAPSLL/LCLIC01 and if the License is in active mode then can be modified by using TCode /SAPSLL/LCD_CHANGE
If my input didn't assist, then try to post your SAP GTS related query in SCN Forum following, for expertise help on SAP GTS.
- [Forum on *_SAP Global Trade Service_*|SAP Global Trade Services (GTS);
Regards
JP

Camera control and Monitor Software

Hi All,
Two questions, quasi-related.
First, does anyone know of any camera control software for Sony? I have a TR27 and an HDR FX1.
Second, does anyone have any experience with monitoring software? Specifically, I am looking at the Red Lightning DV Monitor software. It would be nice to go from the camera directly to the hard drive. Also, is there any software which lets you monitor more than one camera simultaneously?
Thanks. Any input/links would be helpful and appreciated.
--Dana

They should produce the same EXACT version of the RAW file.
The profiles are meant to give approximately the same rendering concerning tone and color. You cannot render the exact same thing as Canon uses proprietary algorithms which Lightroom cannot use. The profiles just approximate those using Lightroom's RAW engine. Also they will only come close if you use default settings in your camera, so no highlight priority, no added saturation, etc. If you want the exact same thing, shoot jpeg or convert the RAW to tiff in DPP. That said, my experience is that the camera matching profiles come very close to out-of-camera rendering as long as you don't modify the styles.
I say they HAVE to, because otherwise who is right - who´s got the true colors (e.g. Faithful style is supposed to represent colors exactly if shot at 5200K, yet DPP Faithful differs from LR faithful????)
None of Canon's styles give accurate rendering. That is not what they are meant to do. They are meant to be visually attractive, which is very different from accurate. Faithful is not really scene referred correct color. See for some measurements of that on one of the more accurate cameras, the Canon 5D mk II, here. The way to get correct color, if that is what you are interested in, is to shoot a colorchecker chart and use Adobe's free DNG profile editor to generate a calibrated profile for your camera.
Also, is there a way to convert other picture styles one has created into Lightroom profiles perhaps through some use of DNG Profile Editor?
No. Would be neat, but is not currently possible without a lot of manual labor. You can shoot a colorchecker and by comparing the rendering in DNG profile editor to that in DPP visually and using the patch tools, you might be able to sort of get there but that is going to be very tedious. It would be nice if we were able to give DNG Profile Editor a different target than perfect rendering of the colorchecker, because right now, the only way to do it is visual.

Camera Control software

Hello out there,
I own a Canon XL2 and wanted to buy their camera control software but it only supports PC's...go figure that one! Anyway, I was wondering if there was any professional type control software for the Mac and this camera. I need the built in wave form monitor, vector scope and the software to have the capability of inputing the menu settings.
Thanks

The only control software for Canon's I know of is this one here:
http://www.felixtheissen.com/apps/Web-Site/custom%20presets%20editors%20for%20ma c%20and%20win.html
It's beta, unsupported, and actually meant for Canon's HDV (XH/XL-H) cameras.
At least it's free, so you could still give it a try.
Best regards, Oliver

Will FCE HD allow camera control of Sony HC-7?

I own a Sony HC-7 and am unable to edit with camera control using FCE HD 3.0. I have no problem whatsoever with iMovie HD where camera control works fine.
I think it's horrible that ver 3 does not allow it with such a main stream brand as Sony, even if it is a relativly newer model.
I will gladly upgrade to 3.5 if it will support camera control. Does anyone know if 3.5 will support camera control with a Sony HC-7?
Thank you for your replies.
Jeff
IMac G5 Mac OS X (10.4.5) 2 GHz, 2 GB RAM, 250 MB hard drive

There are only two choices for HD, one ending in 50, and one ending and 60. I am currently using the one ending in 60, but I have tried both.
I have also gone through the Apple store, and it was determined that the only way to capture video from the Sony HC-7 is to capture it manually without without the use of camera control in the software.
The camera works fine with camera control in iMovie HD, but will not work in the Final Cut Express HD product which I had to purchase! I think that's horrible!
Whose fault is this, Apples or Sony's? You can not talk to anyone at Apple about it for free, and of course, Sony tells you to call Apple about it. You know, the usual passing the buck.
Thank you for your reply,
Jeffrey Castaldo

What is camera.control.face_detection?

Hi
in firefox v35 about:config settings, camera.control.face_detection is enabled by default.
what is this setting? it is not documented anywhere on mozilla.org or the web - at least that i could find.
thanks.
Billy Rae

This is used for camera control function for firefox hello . by this function the app is asking of accessing the camera function. So, either the user can allow to access the camera by clicking '''allow''' or '''deny''' to restrict it.
This is a very important privacy feature which stops websites from being able to spy on users without their knowledge.

Galaxy S6 Camera flash issue

Has anyone else experience the camera flash issue that is posted on the web? I'm experiencing it on my Black 64GB version. Never had an issue until I opened the camera app for the first time..It was at night so when I turned the camera off I kept noticing this faint light on the back. I thought it was just the brightness of the yellow of the flash because it is bright, but when I went pitch black, I can still see the faint glow of the camera flash. It will not cut off. I've turned the phone completely off and it still shows....It is definitely draining my battery and it's starting to bother me. Just curious if anyone else noticed. According to the web, samsung is aware and working on a fix for it.

No problem...No, I was not able to resolve issue. The temporary fix is to
wipe the phone and then not use flash on your camera or the flashlight; for
me that defeated the purpose...I just continued to return the phone until I
received one that doesn't have the issue...took me 2 exchanges but I think
I've found one that doesn't have that issue.

SX80 Visca camera control issues

Similar Messages

Maybe you are looking for