SXI_CACHE ISSUE
Hi All,
We are facing below error in SXI_CACHE, though we have applied the Note 1915682.
PI 7.31
'HTTP status code 403 Forbidden' while executing HTTP request (calling method 'get_status').
Regards,
Mani
Hi Hareesh,
Thanks for the info, issue is solved by applying note 1894606 - HTTP errors in sxi_cache
Regards,
Mani
Similar Messages
-
PI 7.11 - SXI_CACHE Issue - SQL 0904 - Resource Limit Exceeded
Hi PI & IBM I Gurus,
We are having the SXI_CACHE issue in our PI 7.11 SPS04 system. When we try to do the delta cache refresh through SXI_CACHE, it is returning the error SQL 0904 - Resource limit exceeded. When we try to do the full cache refresh, it is getting the issue 'Application issue during request processing'.
We have cleaned up the SQL Packages with DLTR3PKG command, which did not resolve the issue. We recently performed a system copy to build the QA instance and I observed that the adapter engine cache for the development is presented in the QA instance and removed that cache from there.
I am not seeing the adapter engine connection data cache in our PI system. The adapter engine cache is working fine.
All the caches are working fine from the PI Administration page. The cache connectivity test is failing with the same error as I mentioned for the SXI_CACHE.
Please let me know if you have encountered any issue like this on IBM I 6.1 Platform.
Your help is highly appreciated.
Thanks
KalyanHi Kalyan,
SQL0904 has different reason codes ...
Which one are you seeing ?
Is the SQL pack really at its boundary of 1GB ?
... otherwise, it is perhaps a totally different issue ... then DLTR3PKG cannot help at all ...
If you should see this big SQL Package, you should use PRTSQLINF in order to see if there is more or less over and over the same SQL in, just with different host variables or so ...
If the last point should be the case, I would open a message with BC-DB-DB4 so that they can check how to help here or to talk to the application people to behave a bit different ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de -
PI 7.11 - SXI_CACHE Issue - SQL0904 - Resource limit exceeded
Hi IBM I Gurus,
We are having the SXI_CACHE issue in our PI 7.11 SPS04 system. When we try to do the delta cache refresh through SXI_CACHE, it is returning the error SQL 0904 - Resource limit exceeded. When we try to do the full cache refresh, it is getting the issue 'Application issue during request processing'.
We have cleaned up the SQL Packages with DLTR3PKG command, which did not resolve the issue. We recently performed a system copy to build the QA instance and I observed that the adapter engine cache for the development is presented in the QA instance and removed that cache from there.
I am not seeing the adapter engine connection data cache in our PI system. The adapter engine cache is working fine.
All the caches are working fine from the PI Administration page. The cache connectivity test is failing with the same error as I mentioned for the SXI_CACHE.
Please let me know if you have encountered any issue like this on IBM I 6.1 Platform.
Your help is highly appreciated.
Thanks
KalyanHi Kalyan,
SQL0904 has different reason codes ...
Which one are you seeing ?
Is the SQL pack really at its boundary of 1GB ?
... otherwise, it is perhaps a totally different issue ... then DLTR3PKG cannot help at all ...
If you should see this big SQL Package, you should use PRTSQLINF in order to see if there is more or less over and over the same SQL in, just with different host variables or so ...
If the last point should be the case, I would open a message with BC-DB-DB4 so that they can check how to help here or to talk to the application people to behave a bit different ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de -
Automatic cache refresh problem with SXI_CACHE in PI70 Sp09
Dear Friends,
We are facing problems with SXI_CACHE
ISSUE: Automatic refreshing is not done, evey time we had to manaully refresh it going to sxi_cache.
DETAILS
SERVER : PI70 SP09, running on Netweaver 2004S
RFC: Destination INTEGRATIOn_SERVER_HMI
TYPE : H
USER : PIISUSER-service user
Role : SAP_XI_IS_SERV_USER
prefix path: /dir/CacheRefresh
Service No : Http port No (configured one )
License : Valid license not temporary one.
we have configured as mentioned in Configuration guide, still we are facing problems
I searched the SDn got few tips , but that really didnt help to resolve the issue.
Finally we thought of raising this issue to SAP, before doing it i thought i could get some help from SDN.
Any pointers that could resolve this issue will be appreciated.
Regards
[email protected]Hi Chandra,
Plz compare the below mentioned settings with you current settings in XI.
Go to SM59 and create
RFC Destination as "INTEGRATION_DIRECTORY_HMI"
Connection Type: H
Under Technical Setting TAB
Target Host: write the host name
Path Prefix: /dir/CacheRefresh
Service No: enter J2ee port no (e.g. 50000)
Under Logon/Security TAB
select Basic Authontication radio button
SSL select inactive
Under Logon:
Lang: EN
Client: enter client
User: XIISUSER
Password: *******
Under Special Option TAB
HTTP Setting:
HTTP Ver: HTTP 1.0
Compression: inactive
Compressed response: NO
HTTP Cookies: Yes (All)
After doing abobe, press the Test Connection button and accept all cookies and see what is the result. After this refresh the cacahe by sxi_cache.
Regards,
Sarvesh -
Automatic cache refresh problem with SXI_CACHE
Dear Friends,
We are facing problems with SXI_CACHE
ISSUE: Automatic refreshing is not done, evey time we had to manaully refresh it going to sxi_cache.
DETAILS
SERVER : PI70 SP09, running on Netweaver 2004S
RFC: Destination INTEGRATIOn_SERVER_HMI
TYPE : H
USER : PIISUSER-service user
Role : SAP_XI_IS_SERV_USER
prefix path: /dir/CacheRefresh
Service No : Http port No (configured one )
License : Valid license not temporary one.
we have configured as mentioned in Configuration guide, still we are facing problems
I searched the SDn got few tips , but that really didnt help to resolve the issue.
Finally we thought of raising this issue to SAP, before doing it i thought i could get some help from SDN.
Any pointers that could resolve this issue will be appreciated.
Regards
[email protected]Hi Chandra,
Plz compare the below mentioned settings with you current settings in XI.
Go to SM59 and create
RFC Destination as "INTEGRATION_DIRECTORY_HMI"
Connection Type: H
Under Technical Setting TAB
Target Host: write the host name
Path Prefix: /dir/CacheRefresh
Service No: enter J2ee port no (e.g. 50000)
Under Logon/Security TAB
select Basic Authontication radio button
SSL select inactive
Under Logon:
Lang: EN
Client: enter client
User: XIISUSER
Password: *******
Under Special Option TAB
HTTP Setting:
HTTP Ver: HTTP 1.0
Compression: inactive
Compressed response: NO
HTTP Cookies: Yes (All)
After doing abobe, press the Test Connection button and accept all cookies and see what is the result. After this refresh the cacahe by sxi_cache.
Regards,
Sarvesh -
Error in SAP Netwear Installation. sxi_cache Cache is obselete
Hi all,
I am trying to install SAP Netwear. I have installed it on MS SQL Server,using the guide SAP Installation SR1 on MS SQL.
I have been facing problems from the time i ran the template installer.The step 9 for creation of Creating RFC Destinations in the ABAP Environment had some errors so had to manually configure the RFC Destination to INTEGRATION_DIRECTORY_HMI. I have tested this Creation it has give a Error Code 500 Internal Server Error (The right error code according to the SAP Library)
I have run all the other steps and they have run sucessfully.
I am trying to go to sxi_cache transaction but there the error is the cache is obselete i tried to do a delta refresh (F6).It gives and Error ID Update and Error description as:
<b>com.sap.aii.ib.server.abapcache.CacheRefreshException: Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://hydhtc100107:50100/rep/hmi_service_swc_manager/int?container=any" with user "XIDIRUSER". Response code is 403, response message is "Forbidden"</b>
Please give me inputs how i can solve this issue ... do i need to go to any other transaction and activate cache,so tht i can view the cache being updated.
Rgds
AdityaHi all,
I have tried access the link <b>http://hydhtc100107:50100/rep/hmi_service_swc_manager/int?container=any</b>
with the user XIDIRUSER bt it shows forbidden
I also face the same problem when i have access the administrator tab on the front end screen which has Intergration repository/directory/SLD and runtime workbench.
One more problem is that when i access runtime workbench it says ure forbidden
Please give me inputs totally confused with all wht has happened.
Rgds
Aditya -
Problems in SLD and Cache refresh (SXI_CACHE).
Dear Experts,
I am facing SLD and Cache refresh problems in PI 7.0 on HP-UX.
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says No Business System for ABC Client 100 ".
where ABC=SID. Business System INTEGRATION_SERVER_ABC is declared in SLD and client 100 is assigned.
My question is : Is this a BASIS or DEVELOPER issue? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log Snippet:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_ABC
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current clientHello,
Since this is an PI system, your XI consultant must have created/will need to create business systems in SLD for the scenario to work properly. This error is because it cannot find the business system.
You cannot point out the fingers on Basis or XI and say that it is THEIR issue. Please consult with the consultant who is doing the XI interface and check if the business systems he require are properly created in SLD. If not, create them or ask them to create it (if they are allowed to..).
From the error, what i can see is that you have defined an integration server INTEGRATION_SERVER_ABC in SLD . the XI interface is checking the required business system in the integration server INTEGRATION_SERVER_ABC in SLD but cannot find it over there. Please check the integration server INTEGRATION_SERVER_ABC in SLD and talk to the XI consultant and you will be able to fix this with their help.
Hope this helps you..
Regards,
Jazz -
Problems in SXI_CACHE Refresh
Dear Experts,
I am facing Cache refresh problems in PI 7.0 :
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says " No Business System for ABC Client 100 ". where ABC=SID.
My question is : Is this issue related to BASIS Team or PI Developer Team? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_MXD
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current clientHi Phanikumar,
This problem is related to the Basis. PI Developer is not responsible for that.
First of all make sure that you have generated the Business system Properly.
Just go to RZ70. Enter the required information and generate the Business system.and check if you can see the Technical System corresponding to Your Application system in SLD.
Just varify in SLDCHECK if you can see all the BS available in SLD.
When Applcation system try to get its own business system it uses the report which fetches the data from table "lcrt_clntcache" which get automaticay filled when you create the corresponding BS.
Just Check if you can see the entry in this table.
If not then Run the report LCR_CLEAR_CACHE which will refersh the cache and again RUN SLDCHECK now table ""lcrt_clntcache" should get filled.
if you still face the problem then you have to upgrade your Application server patch. Just Check SPS of your Application server. Just check SAP Note 1034276.
Thanks,
Sunil Singh -
Getting Receiver Agreement issue in IDOC to File scenario
Hi Gurus,
Need your help. I'm working on a IDOC to File scenario. I'm using CREMDM.CREMDM04 as outbound Interface & small structure VEND_FILE_IN_MI as Inbound Interface. Though I've configured the receiver Communication Channel as a File Adapter with proper Inbound Interface I'm seeing the message getting failed which is showing CREMDM.CREMDM04 as both Outbound & Inbound interface and pointing a Receiver Agreement issue . The Receiver service is coming Properly, only the Interface is coming wrong as the sender interface. I've checked both Receiver Agreement & Receiver determination and found the Receiver Service, Communication Channel & Interface are perfectly mapped there, I cross checked the same Configurations in IE via SXI_CACHE after full Cache copy.
Error Message:
No receiver agreement found for sender -SAPERP to receiver -IDOC2FileReceiver,urn:sap-com:document:sap:idoc:messages
Error Category : Outbounding
Error ID : CO_TXT_OUTBINDING_NOT_FOUND
My IR design:
Sender:
Interface : VEND_IDOC_OUT_MI
Message Type : CREMDM.CREMDM04
Receiver:
Interface : VEND_FILE_IN_MI
Message Type : VEND_IN_MT , Data Type VEND_FILE_DT
My ID Config:
1. Sender / Outbound Message: Service Type --> Business System
Service ---> SAPERP
Interface--> VEND_IDOC_OUT_MI
Adapter Type : IDOC
2. Receiver / Inbound Message: Service Type --> Business Service
Service --> IDOC2FileReceiver
Interface ---> VEND_FILE_IN_MI
Adapter Type--> File
3. In Sender Agreement : Specified the Sender Communication Channel
VEND_IDOC_OUT_Channel
4. In Receiver Agreement Configured the receiver service IDOC2FileReceiver aging sender service SAPERP & Interface VEND_IDOC_OUT_MI.
5. In Interface Determination Specified the Inbound Interface VEND_FILE_IN_MI and Interface Mapping VEND_IDOC_FILE_IMAP
6. In Receiver Agreement specified the receiver communication Channel IDOC2FileChannel against Receiver Service & Interface.
I used the Configuration wizard in my second attempt to make sure the sequence of configuration.
Can anyone help me identifying what's going wrong. I'm very new to XI and basically this is the first assignment I'm working on.
Regards,
SubhadipHi Babu,
In the Inbound data type all the fields have MinOccurance = 0 and MaxOccurances unbounded.
Please find the XSD:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://adc.com/poc/sample" targetNamespace="http://adc.com/poc/sample">
<xsd:complexType name="VEND_FILE_DT">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
8f584d80456311dccd680018fe79f69b
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="VENDCODE" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb0390c11dc843000188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor Code
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="VENDNAME1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb4390c11dc84e800188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor name4
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ORT01" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb5390c11dcbe3400188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor City
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PFACH" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
a8653cb6390c11dc896100188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor PO Box
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STRAS" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4811db0335fd11dc9e9600188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor House No & Street
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PSTLZ" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4811db0435fd11dc98b000188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor Postal Code
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LAND1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
4811db0535fd11dc870500188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Vendor Country
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STCD1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7ca8d600403b11dcc9bd00188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Tax Number 1
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="TELF1" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7040e611dcce4300188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Telephone number
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="STCEG" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7140e611dc8f3900188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
VAT Registration Number
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LIFNR" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7240e611dccef700188bd09370
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Account Number of Vendor or Creditor
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ALTKN" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
9abaee7340e611dcb3bc00188bd09370
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:minLength value="0" />
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema> -
Issues in procurement processs
Hi Friends,
I have recently got into a support project with is into procurement process(where data moves from sap to vendor non sap system and vice versa).
So far i have come across issures like idoc failed with status 51, vendor didnt receive the payment.
Anyone who has worked in the procurement process, plz help me with the general issues of failure of idoc and immediate areas to check to resolve the issue.
Thanks,
suresh.Hi Suresh,
You need to know below things
R/3 TCODES
1. WE05 - IDOC status
2. WE19
3. WE20
4. WE21
5. SE59 - to test connections
6. SE58 - tRFC errors
7. SMGW - for Rfc dest type "TCP/IP" program id problem
8. ST22 - many times dumps will give you clear error message
In XI
1. SMQ1 -
2. SMQ2
3. SXI_MONITOR
4. SXI_cache
Good Luck
- Satish -
Urgent: sxi_cache on the satellite systems
Hi every one,
The question basically would be how the transaction <b>sxi_cache </b> should behave on the satellite systems.
When I run the tcode <b>sxi_cache</b> on one of the satellite system. I get 2 error messages
1.Unable to refresh cache contents
2.Error during last attempt to refresh cache
Double-Clicking on each of them will give an error-id as <b>"BUSINESS_SYSTEM"</b> but no error-code. In the screen below, it says <b>"NO INTEGRATION SERVER"</b>
<b>PS:Delta-Cache Refresh and Complete-Cache Refresh are disabled on all the satellite systems. I am not sure if this is normal.</b>
reg,
Message was edited by:
naveen chitluriHi,
Check this blog i am not so sure if it will solve the issue.
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
<b>
Cheers,
*RAJ*</b> -
SXI_CACHE Cache Refresh Error
Hi,
I am getting Runtime Cache Error when running transaction SXI_CACHE in PI 7.1:
Unable to refresh cache contents
INTERNAL_ERROR
Error 'HTTP status code 401 Unauthorized' while executing HTTP request (calling method 'get_status')
Error during last attempt to refresh cache
INTERNAL_ERROR
Error 'HTTP status code 401 Unauthorized' while executing HTTP request (calling method 'get_status')
Can anyone help to resolve this issue?
Thanks.Hi RMS,
As you see in the error messages its purely credentials and authorization issue.
Please ensure below items are intact in your system.
1. Under 'echnical Setting' ensure, you are using the correct port number (It will be your system HTTP port)
2. ensure Path Prefix has value /dir/CacheRefresh
3. Under Logon & Security - Select 'Basic Authentication' confirm the popups and ignore if any warnings
4. For logon data, enter the client of your Integration Server and the user PIISUSER with the valid password.
5. Under Special Options, set Timeout:30000, HTTP Settings: HTTP Version: HTTP 1.0, Compression: inactive, Compressed Response: No; TTP Cookies: Accept Cookies: Yes (All).
6. Save these settings, perform Test Connection
report back if you find any further issues.
Regards
Sekhar -
PI7.1 File to Idoc scenario issue.
Hi,
We recently had an upgrade from PI7 to PI7.1.
When testing File to Idoc scenario ,we had an issue as below
Trace level="1" type="T">*** START APPLICATION TRACE ***</Trace>
<Trace level="1" type="T">Error during lookup - com.sap.aii.mapping.lookup.LookupException: Error when calling an adapter by using the communication channel GeneratedReceiverChannel_RFC (Party: , Service: ED2_200, Object ID: a8f14398a9993dccadbe983d401f693a) The channel with object ID a8f14398a9993dccadbe983d401f693a could not be found in the Integration Server Java Cache. Check if the channel exists in the Integration Builder Directory and execute a refresh of the Java Cache.</Trace>
<Trace level="1" type="T">Error when parsing RFC Response - null</Trace>
<Trace level="1" type="T">*** END APPLICATION TRACE ***</Trace>
This was working fine before upggrade.
Any changes required to be done in scenario?
Pls let me know.
Thanks,
Srinivasado a CPA cache refresh
http://hostname:port/CPACache/refresh?mode=full
also check if the object is visible in tcode SXI_CACHE..
also refresh the SXI_CACHE -
BPM Process deleted from ESR / ID but still visible in SXI_CACHE
Hi,
We are having some issues with BPM where even after deleteing the BPM processes from PI ESR and its corresponsing ID reference the processes are still visible in SXI_CACHE.
Can any one point to how we can get the CACHE alligned to wht is in the ESR and ID.
Regards,
Arunavawhere even after deleting the BPM processes from PI ESR and its corresponding ID reference the processes are still visible in SXI_CACHE.
It gets refreshed automatically may be not immediately but daily , if you check the SXI_Cache after some time the deleted one will not appear.
It will be visible in SXI_CACHE,please check the return value it should be 0 not 99.
Try creating the IP with some other name , copy the existing one with new name and import in ID and try.
Regards,
Srinivas -
Integration Process is not displayed in SXI_CACHE
Hi Experts,
I am getting the below eror when I try to excute the SOAP -> JDBC BPM scenario
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
The integration Process is not displayed in the SXI_CACHE. Done with all type of cache refresh, restarted the server also.
What could be the problem?
Earlier I was getting the similar error for non-BPM scenario, just refreshed the cache in Admin, IR, ID and in SXI_CACHE and it solved the issue.
But here the Integration Process is not displayed after doing the above step.
Note: Always the SXI_CACHE is in ERROR status(Red color symbol)
Everytime before executing the scenario, I refresh the cache in SXI_CACHE. Once I done with the refresh, I get the belwo status
1. Cache contents are being refreshed (Yellow color)
2. Error during last attempt to refresh cache (Red Color)
Please share your suggestions to solve this issue.
Regards
SaraHi Sara
Go to SXI_CACHE , then from Menu XI Runtime Cache choose Start Delta Cache RefreshF6. Try this, , After clicking wait for sometime to refresh.
Path Prefix set to /dir/CacheRefresh.
https://websmp204.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Also check out the role of the user using SU01. are you using PIISUSER?
Also refer:
How to handle cache in PI - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34
Thanks
Maybe you are looking for
-
Error in LSMW while specifying file for Material Cassification and Info Rec
Hi Friends, I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method. The error message i'm getting is: "Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be l
-
How to get Dateformat as DD/MM/YYYY
hi, I am facing problem in date display I want date in format dd/mm/yyyy like 04/05/2005 I am using package in jsp page <%@ page import="java.util.Date" %> <td> <html:text property="startDate" size="10" maxlength="10" value='<%= new Date().toString()
-
Transfer/copy photos with edits to another computer or harddrive
Hi, How can I make this process work? 1. My partner and I both have lightroom : she's on a PC and me on a Mac. 2. We both take photos together at a shoot. 3. We then go back, make edits to our own photos. 4. Then we need to share them with eachother
-
The preview of my hardcover book as iPhoto laid it out is 62 pgs. even though there are only 82 photos in my album. The auto layout used mostly 1 photo, full pages. Obviosuly I can manually re-layout the pages as multi-photo pages and reduce the nu
-
I am running a website on my server and I works great! I am using dyndns.com to forward users connecting to example.com to my external IP address. So my website's links are setup as "http://example.com/...." but when users connect inside my local net