SXMB_MONI displays Errors only

hi all,
Due to some reason SXMB_MONI is displaying ERRORS only even if I select all the messagse. Is there a config setting that need to be changed ?
Please advise, Thanks.
FS

On SXMB_MONI Screen, Make VIEW Button = Standard
Make Length of Output List for 2000.
Status Group & Status, Make these BLANK.
Date from - give date of 1 year back.
SENDER & RECEIVER, make it BLANK.
& RUN.

Similar Messages

Batch Input Session - Display Error Only - SM35

Dear all,
Need to do material master extension in MM01 and considering batch input session using mode 'display error' only.
However,do have a concern on its performance or run time. In SM35, running in display error only mode - will there be any time out error like the ones encounter in abap reporting ?
This is because, we will be dealing with a huge volume of data (round 2,000). Therefore would like to know, if there would be any possibility that the bdc session in sm35 will experience a time out or not .
Appreciate it if you could shed some lights on this. Thanks in advance.

Hello there,
Executing MM01's batch job in background wasn't really an option. This is because, this error was encountered "Control Framework: Fatal error - GUI cannot be reached".
Had done a search on this -- and it indicates that in background mode there isn't GUI involved. Searched result also shows that this error appears when its comes to screens with text ie. Purchase Text or Sales text. Nope, no BDC on entering text involved.
http://www.sapfans.com/forums/viewtopic.php?f=13&t=164902&hilit=ControlFramework%3AFatalerrorGUIcannotbe+reached
Therefore the option am considering is executing the batch job in "Display Error Only". Nonetheless, am not too sure if this will cause time out. The other reason as to this option is that -- we initially introduced CALL TRANSACTION for extending material in MM01. However, functional feedback that it was slow.
Kindly advise - thanks in advance.

Currency Displays ERROR only for IDR (Indonesian Currency)

Hello,
I have one query that displays like 400.00 ERROR only when the currency is IDR (Indonesian Currency). I have already used RSRT and it did not fix the problem. Maybe the problem is related to the fact that Indonesia go-live was recently.
Thanks,
Adriana

Hi Adraina,
Check if you have this currency listed in the BW currency tables (TCURC). If not, you may need to transfer the currencies from the source system (RSA1 > Modeling > Source Systems > Right click > Transfer Global Setting > Currencies)
Hope this helps...

Display error message in batch job log

Hello
I have a batch job running and I have an error coming during some validation logic.
The problem is I need to continue the batch job when this error message comes and it should not cancel the batch job as it is doing currently but display that error message in batch job log, there are more similar error messages coming in job log and job gets finished, but when my error message comes job gets cancelled.
I cannot give it as info message as it will give wrong idea about message type.
Is there any FM by which we can add message in job log?

Sanjeev I have done that but problem is I do not want to give that as Information message but Error message only and continue processing.
If you see in screenshot 3rd message is given by me as information and you can see error messages also 6th and 7th and job continued till it is finished
Basically I want that 'I' to be displayed as 'E'.
Display error message in batch job log

Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."

Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHui

Hi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS

"XML page cannot be displayed" error

Using XML output on a table with more than a few rows falls over with a "XML page cannot be displayed" error. Sometimes only the error is displayed, sometimes some rows are displayed with this error at the end of the page (eg the DEMO_STATES table)
Can anyone advise if there is some sort of limiter at work here?
Thanks,
Barry

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

How to display error message in abap

How to dispaly error message in report?
i have to check the range bewteen two days and if it is not in range have to display error message only once.
next time if i press the execute button report will get executed without showing the warning message.
i am calculating the days between two dates, i am displaying the error message but if i press the execute button i will not allow me to execute the report.it again shows me the error message.i have to skip this in 2nd time.
can any one suggest what to do with this?

hello suman,
i am using select-option in my report. And i have to check the difference between two dates in select option input box( low-value and high-value). if it is greater then suppose 10 then i have to display warning message at once and then if click on execute button , the report should get executed without showing any warning messages in report.
here i am attaching my source code.please take a close look and tell me where should i have to make change.
SELECT-OPTIONS :s_bedat FOR ekko-bedat.
AT SELECTION-SCREEN ON s_bedat.
IF NOT s_bedat IS INITIAL.
    PERFORM bedat_validate.                       " Perform for Purchasing Document Date Validation
ENDIF.
FORM bedat_validate .                        " Form for Purchasing Document Date Validation
DATA : diffr TYPE i.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = s_bedat-high
      i_datum_von                   = s_bedat-low
I_KZ_EXCL_VON                 = '0'
I_KZ_INCL_BIS                 = '0'
I_KZ_ULT_BIS                  = ' '
I_KZ_ULT_VON                  = ' '
I_STGMETH                     = '0'
I_SZBMETH                     = '1'
   IMPORTING
     e_tage                        = diffr
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED       = 1
OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF diffr GT 31.
      MESSAGE s009(zerrormsg) WITH text-000 DISPLAY LIKE 'W'.
      LEAVE TO LIST-PROCESSING.
    ENDIF.
ENDIF.
ENDFORM.                    " BEDAT_VALIDATE

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Error : Only edit objects from package ZSD in local requests

Hi Experts,
We are modifying all Z-programs to unicode enabled programs in ECC6.0 Upgradation. While doing this we are not able to save it as a transportable request. It displays error as "Only edit objects from package ZSD in local requests".
So can anyone tell me how to save it as a transportable request.
Thanks,
Ranjith C.

Hi,
two ways:
1. change the transport type: create transport type copy in se01 and copy all mentioned objects to that transport
2. better way: correct development class and transport layer
case a. target system was not definied (not known to TMS) or is empty
case b. source system (original system for objects) not known to TMS
case c. objects assigned to local package (former local development class)
etc.
If you don't understand this explanation, just use one of Z transport layers showed in stms, by changing the transport layer in the definition of the package (se80) to shown in STMS (link name from source to targed system)
Kind regards,
Mirek

Non-displaying error messages

I've developed this form that runs into oracle form errors. Everyone who runs my forms can see the error message at the bottom while I just get the message 'Working...'
Also text fields that are attatched to LOV's do no return a system message that the field is an LOV selectable field. Getting the LOV is not the problem...but all the associated infomarion doesn't appear like number of records in the LOV which all the users can get. Help|Display Error doesn't return the error message or error code back to me.
This is a problem only on my machine but it's hard to see what errors other ppl are getting if all I hear is the "ding" sound without the error message.
Bad Oracle Forms install?

Make sure that you have the console window set to an existing window in the module property.

"Page cannot be displayed" error when attempting to download large dataset.

In the following code, can anybody please tell me at what point the data actually starts to get transferred and the popup "download file" box appears? I'm thinking that the dialog box should appear on the first outputstream.write and start transferring data. However, I think it's not transferring the data until the while loop has finished! That's bad because this is a real long process and I eventually get "Page cannot be displayed" error. On a smaller dataset (shorter while loop) everything seems to work correctly. Is there some sort of a web server configuration that tells it to write out the data ONLY if outputstream closes? I really need it to write out the data as it's coming in. Code is below and thanks in advance.
response.setHeader("Expires", "0");
response.setHeader("Content-disposition","inline;filename=Download.csv");
response.setContentType("application/x-msdownload");
outputStream = response.getOutputStream();
bufferInBytes = this.getData();
while (bufferInBytes != null)
outputStream.write(bufferInBytes, 0, bufferInBytes.length);
outputStream.flush();
bufferInBytes = this.getData();
outputStream.close();

Hi All,
Thanks for all your help.
Seems I already found out the issue.
Since we are using "Personal Home Page" for the system profile option "Self Service Personal Home Page Mode" I checked oracle note and found out
that 11i did not support this mode. Maybe this is the problem that is why we are getting page cannot be displayed error when only 1 responsibility is active.
The way to fix this, is to use mode 'Framework Only' instead of 'Personal Home Page' as Oracle are phasing out mod_plsql based UI and it will not be present in future releases. No maintenance is being performed (i.e. bug fixes) to the mod_plsql based UI technology.
Please check this note for more clearer explanation:
Is The 'Personal Home Page' Mode Supported In Oracle 11i Applications? [ID 368628.1]
Again, thank you for your help!

Batch management requirement cannot be changed; choose "Display errors

i am getting this error in material master when i am removing tick from batch managment
regard
nabil

Batch management requirement cannot be changed; choose "Display errors"
Message no. M3530
Diagnosis
The pushbutton Display errors appears only in dialog mode, not in data transfer or in mass maintenance.
Procedure
If this message appears in data transfer or in mass maintenance, and you want to know why the field cannot be changed, access the material in dialog mode using the relevant transaction below, try to change the field as required, and then choose Display errors:
Industry
Proceed
Retail
Proceed

Transport error: "Only edit objects from package CL in local requests"

I have made changes to an SAP original program as per Note 1096366 on SAP's service web site. The program is an Include program (LCLCMFMZ). I have assigned it a transport number, but it keeps trying to make the target local. When I change the target to DEV, it will not transport and I get the following error:
"Only edit objects from package CL in local requests"
Does anyone know what this error means?
Thanks.

Thanks Nick,
but I think I have figured it out. I needed to create a transport of copies (from se09) and include this object in that transport (right click and choose 'Include object...'). Then back to se01 and display all transportable object (including transport of copies). Then select my transport of copies, choose a target system (from double clicking and going to properties). Only then would it let this object get transported.

Page Cannot Display Error on Trays Layout

Hi,
Version : 10gR3
We get page can't display error on Trays layout for showing homepage when we connect UCM. But, it works fine with Top Menus layout.
The Properties window, shows a URL: res://ieframe.dll/dnserror.htm#https://host.domain....
No problem happens with Top menus
Error reported in apache logs:
[Thu Apr 26 11:39:08 2012] [error] [client 194.66.183.99] Invalid method in request \x16\x03\x01
please help.
cheers,
J

Highly odd.
We get page can't display error on Trays layout for showing homepage when we connect UCM. But, it works fine with Top Menus layout.The default layout is Trays. If you don't see a page when you log in, how are you changing the layout to Top Menus? A link to the user profile page isn't available if the Trays layout didn't appear. Are there some customizations in place that affect the UI?
Please note that the error accurs only at the time of connecting UCM (first attept), Once we got into UCM and then if i click in home or search (from UCM menu) it works fine and it displays the page correctly. So are you saying that once you hit the refresh button, the issue goes away?
If you change the skin, do you see the same problem? Try changing the skin from Oracle to Oracle2 for the affected user.
A lot of the UI is generated in JavaScript. The script that builds the Trays layout is different from the script that builds the Top Menus layout, and the skins themselves add another level. I'd start by clearing your browser cache and seeing if the issue persists. If it doesn't, I'd suggest going into weblayout, and delete the trays directories for the affected skin. Then republish static and dynamic files, and see if the issue persists.

Dashboard Display Error

Hi Gurus,
I getting error while accessing sub dashboard.I have Dashboard Name as Sales and i have sub dashboard underneath Sales says S1,S2,S3 and each sub dashboards has dashboard pages respectively.So when i select S1 sub dashboard it throws me error as
Dashboard Display Error
Assertion failure: pRoot at line 107 of /vol1/users/anabuild/views/nightly/Tue/aruba/RH_Linux/vobs/071217.1900/analytics_web/main/project/webxml/xmldocument.cpp
Error Details
Error Codes: OQ78YWIW
and when i select S2,S3 it shows me dashboard pages fine doesn't give me any error.I restarted all my services but no luck.This error throws only if i enter with user id and password but it doesn't throw error if enter as Administrator.
Can you guys let me know what is error meant by and if any one have faced such scenario.
I really appreciate your help.

Does the user have the same read/write rights on the server as the administrator?
Is there a query limitation based on the user credentials?
regards
John
http://obiee101.blogspot.com/

SXMB_MONI displays Errors only

Similar Messages

Maybe you are looking for