SXMB_MONI SAP:System element is missing in Inbound Message

Hi Experts,
In one of my Proxy to File interface, I am using Dynamic file configuration at receiver channel. I have applied every setting which is required. And it is working perfectly fine in my Development environment. I have moved the same configuration in my Quality Environment.
But there, while executing this, I noticed one of step i.e. "System" along with "DynamicConfiguration" is missing in SXMB MONI. Any one having any idea, what could be the possible reason for it?
My current SXMB Moni don't have this step right from begining (screen 1 below). While in Devlopment SXMB_Moni (Screen 2 below) i can see "System" from begining and "DynamicConfiguration" under request message mapping step.
Any help will be great.
Thanks in advance!

Hi,
check with ur basis team to refresh the cache using the TR code SXI_CACHE
complete cache refresh with below url
http://host:port/CPACache/refresh?mode=full
Regards
srinivas

Similar Messages

Activating WebService on R/3 to connect a non-SAP system (XML)

Hi Experts,
Apologize if my thread is not on the right category. I'm not sure where to put this.
Is there any steps on how to activate webService to connect to a non-SAP system without using middleware like XI/PI. I'm trying to connect to a non-SAP system that sends an xml format message and then directly connect to an R/3 system. Is this possible? thanks!

Hi,
Check this link.
Web Services from Function Module
it might help u.
Thanks.

Data elements for IDoc Segments to non-SAP system

Hi,
I need to create IDocs for transferring data to non-SAP system. When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system? Because there are many fields where the field attributes of SAP system do not match the corresponding fields of receiving non-SAP system.
Thanks in advance!!
Regards,
Sriram

Hi Sriram,
When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system
Is it custom segments .
Regards,
Madhu.

Add web element in Crystal report for SAP system

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.

Hi All,
i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
OS: MS Windows 7 SP1
SAP Business One 8.82 pl7
Crystal report 2011
Crystal report integration package installed under B1_SHare/Client
But still the problem persist on the workstation.
Please help me solve this problem.
Thank you,
ana

ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)

Hi Experts I´m facing this issue.
This is tp version 340.16.41 (release 640)
HALT 20091029110915
ERROR: SAP-System not installed properly. (TADIR HEAD SYST missing.)
ERROR: EXIT(16) -> process ID is: 9660
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0233
standard output from tp and from tools called by tp:
Any Clue?

Hi,
Was the system copied from another system? Or is this a new installation?
If yes, did you run SE06 after the installation?
What is the results of trans.log (generated from R3trans -d)?
Also paste the contents of table TADIR in SE16.
Best regards,
Warren

*IDOC INBOUND ( NON SAP system - SAP system )*

I am transferring IDOC INBOUND ( NON SAP system ->> SAP system ) by calling SAP standard funtc module IDOC_INBOUND_SINGLE using SAP JCo.
In which I am passing all necessary information in Control Record regarding sender and receiver port/IDOC/segment etc.
BUT help me to clarify my doubt that if i am calling a function and i am able to access SAP FM, then why i have to specify the SAP port/RFC connection at RECEIVER end in WE21.
Whats the Significance if i am calling the FM from same SAP system and configuring the port explicitly in WE21.*
If i don't Specify in we02 i am getting error as EDI : RECEIVER PORT in CONTROL RECORD is INVALID

Dear Sree,
For Basic understanding of IDOC read : saptechnical - Step-by Step ALE IDOC guide ( all necessary TCodes available here )
Kindly let me know your data flow .
In short :
As per my scenario the data flow is from non SAP to SAP i,.e. Inbound processing.
At my non SAP i am calling SAP standard function IDOC_INBOUND_SINGLE using SAP Jco 2.1.
You have to fill all Control Structure EDI_DC40 ( port etc. ) and Table parameter EDI_DD40 ( segment etc. )
Read IDOC status and error in WE02.
Goodluck.
- Aakash

Update data of pdf (offline adobe forms) to sap system By Inbound E-mail

Hello,
I am trying to update data in PDF (offline adobe forms) to Sap system by Inbound E-mail. Kindly give some suggestions for scenario to do this task.

Hi,
There ia a good information for your requirement.
Please check the below link.
http://www.sdn.sap.com/irj/scn/events?rid=/library/uuid/c0c139d3-3eae-2910-01a1-d253f2587b0e&overridelayout=true
Thanks.
Uma

ALE: Sending IDOC inbound from non-SAP system

Hi
How does one need to setup the SAP system to accept data from an external non-SAP system. Should one setup some sort of conection to trigger an import to SAP?

Hi,
On the SAP side you need to create a partner profile in T.code: WE20 of type LS. And add the message type, idoc type in the inbound parameters section of it.
And you must also specify the partner number you created here, on the IDoc control record.
This link from SAP help, will provide some addition data.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6524507d11d18ee90000e8366fc2/frameset.htm">http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6524507d11d18ee90000e8366fc2/frameset.htm</a>
Hope this helps.
Regards,
Sumant.

Option "SAP system" missing in SAP installer Win 2003 (32 bit)

Hi
We have SAP NW 7.0 SR3 & SAP ERP 6.0 SR3
When we are trying to install SAP ERP/ NW using master installer on Win 2003 32 bit (any database) the installation option "SAP Systems" is missing.
The same is available in Win 64 bit installation.
We have copied product.catalog file from 64 bit setup to 32 bit setup and started sapinst.exe again.
It worked fine.
ECC has been installed and we are able to thru SAP GUI (thick client).
Is it OK to do so?
Was this intentional or a bug in setup?
Thanks in advance !
Ruhi/ Ritesh

Hi Ruhi,
New installation of ECC6 is for 64 bit only.You can not have 32bit installation any more.
That can be a reason.
Regards
Ashok

Inbound MATMAS: layout from Non-SAP system

Hi
I would like to know how the layout of the inbound MATMAS file(xlm/flatfile) should look like and how will i be able to trigger an inbound update of MATMAS from an external non-SAP system without a middleware system?
Giovanni
Message was edited by: Giovanni Baumann

Hi,
It will probably be looking like a IDOC in XML format. You can go to WE60 transaction and look at the XML schema (documentation --> XML Schema), that is how your file with data should look like.
Then your program can pick up the file and pass the data to EDI_DATA_INCOMING function.
Regards,
Ravi
Note : Please mark the helpful answers

IDOCS: Inbound non-SAP system

Hi
The outbound idocs works fine. I want to create an inbound goods receipt/movement idoc.
Should i rather write RFC to update the SAP system from a non-SAP system ?

Hi,
Your first query...
Should i rather write RFC to update the SAP system from a non-SAP system ?
Always prefer using idocs for posting before BAPI / RFC fucntion module.
As you have mentioned outbound idocs are working fine..which means you are able to create idocs from non-sap system..right? If so you can use same idoc type for posting.
Your second query's answer...
Check out following code for calling BAPI_GOODSMVT_CREATE
You need to code to call function module /BAPI in your posting program as follows..
append the data into the corresponding internal tables and work-area, check for the IMPORT and TABLES parameter in the function module BAPI_GOODSMVT_CREATE.
a.     GOODSMVT_HEADER-DOC_DATE = SYST-DATM
b.     GOODSMVT_HEADER -PSTNG_DATE = RECEIPT_DATE (Input File)
c.     GOODSMVT_HEADER - HEADER_TXT = BATCH ID (Input File)
d.     GOODSMVT_HEADER - GR_GI_SLIP_NO = GOODS_INWARD_NO (Input File)
e.     GOODSMVT_ITEM-MOVE_TYPE = Constant 101
f.     GOODSMVT_ITEM-PO_NUMBER = PURCHASE_ORDER_NO (Input File)
g.     GOODSMVT_ITEM -PO_ITEM = PURCHASE_ORDER_LINE_NO (Input File)
h.     GOODSMVT_ITEM PLANT = From Selection Screen (WERKS)
i.     GOODSMVT_ITEM STGE_LOC = From Selection Screen (LGORT)
j.     GOODSMVT_ITEM -ENTRY_QNT = QUANTITY_RETURNED (Input File)
k.     GOODSMVT_ITEM -NO_MORE_GR = COMPLETE_INDICATOR (Input File). Value X if status = X else space.
6.     Call the function module BAPI_GOODSMVT_CREATE.
7.     Use function module BAPI_TRANSACTION_COMMIT to do the commit work.
append the data into the corresponding internal tables and work-area, check for the IMPORT and TABLES parameter in the function module BAPI_GOODSMVT_CREATE.
a.     GOODSMVT_HEADER-DOC_DATE = SYST-DATM
b.     GOODSMVT_HEADER -PSTNG_DATE = RECEIPT_DATE (Input File)
c.     GOODSMVT_HEADER - HEADER_TXT = BATCH ID (Input File)
d.     GOODSMVT_HEADER - GR_GI_SLIP_NO = GOODS_INWARD_NO (Input File)
e.     GOODSMVT_ITEM-MOVE_TYPE = Constant 101
f.     GOODSMVT_ITEM-PO_NUMBER = PURCHASE_ORDER_NO (Input File)
g.     GOODSMVT_ITEM -PO_ITEM = PURCHASE_ORDER_LINE_NO (Input File)
h.     GOODSMVT_ITEM PLANT = From Selection Screen (WERKS)
i.     GOODSMVT_ITEM STGE_LOC = From Selection Screen (LGORT)
j.     GOODSMVT_ITEM -ENTRY_QNT = QUANTITY_RETURNED (Input File)
k.     GOODSMVT_ITEM -NO_MORE_GR = COMPLETE_INDICATOR (Input File). Value X if status = X else space.
6.     Call the function module BAPI_GOODSMVT_CREATE.
7.     Use function module BAPI_TRANSACTION_COMMIT to do the commit work.
Hope this will help you.
Cheers,
Nilesh

Inbound idoc failing to reach SAP system.

Hi All,
We are upgrading our SAP system from release 700 to 730. Post upgrade we have identified that idocs which are supposed to reach SAP as inbound are failing in Biz Talk with below message.
Error details: Microsoft.ServiceModel.Channels.Common.XmlReaderParsingException: The segment name is not valid for the IDOCTYP, Release, or CIMTYP. Segment name: E2EDT37003GRP IDOCTYP: SHPMNT03 Release: 700 CIMTYP: . Ensure that your message xml validates against the operation schema.
This happening for only one inbound idoc which is using SHPMNT03 idoc.Whereas other inbound idoc which is using /AFS/ORDERS05 idoc is reaching SAP without any issues. I am bit confused why this is happening for idoc SHPMNT03.
Please let me know your thoughts.
Thanks,
Gowrinath.

Hi Ramya,
Thanks for your response.
In Biz Talk schema is designed for 700 release idoc.Whereas our system is upgraded to 731 release.
Hotfix is for Biz Talk. Can't we implement any solution in SAP side.
Thanks,
Gowrinath.

How to post inbound idoc in sap system?

Dear All,
How to post inbound Idoc in sap system?
Regards,
Amar
Edited by: amar kumar on Nov 23, 2009 2:53 PM

Hi Amar,
Use the FM IDOC_WRITE_AND_START_INBOUND to post an inbound IDoc. Just build the EDIDD and *EDIDC8 tables and enter a profile for a inbound message type from a partner. It returns a IDoc number. Don't forget to do commit work.
Regards
Abhii

Add missing fonts in SAP System

Hello,
There is fonts option on sap easy access screen
Customize Local Layout (Alt + F12) --> Font (I18N)
Here we can see some fonts.
My question is can we add Fonts here, because Fonts like Tahoma, TimesNewRoman, Verdana are not listed in that list.
If yes How can we do so?
I know we can add fonts in SAP system via SE73 which can be used in SmartForms etc. But how to add fonts in above mentioned path?
Regards,
Abhay

Hi Abhay,
It should be installed on your desktop , if its there you can use these.
Its not SAP specific , i have checked i am able to use all fonts which are installed in my desktop.
You can check for installed fonts at control panel and then fonts.
You can try to add new font and then use.
Regards,
Gagan Deep Kaushal

SAP NetWeaver 7.1 CE SP05 Trial - SAP System is missing

To all:
I have completed the installation of SAP NetWeaver 7.1 CE SP05 Trial locally to my PC.
When I go into NWDC, I noticed that a SAP instance does not exist in the pulldown Windows -> Preferences - SAP AS Java. When I tried to register my Instance Host and Instance Number it says the sap instance is not currently reachable, check instance name,
So, my question is to everyone, any ideas on why my SAP System is not displayed?
Do I have to have that defined prior to registering the Instance Host and Instance Number?
I have looked at SAP MCC and made sure that for CE1, that my
Instance Host and Instance Number are there.
Thanks
IPhillips

Start the server first, then you can add it.
By the way, not NWDC, but NWDS.

SXMB_MONI SAP:System element is missing in Inbound Message

Similar Messages

Maybe you are looking for