SXMS_ASYNC_EXEC (ICM_HTTP_CONNECTION_FAILED)

Hi!
I am trying to replicate Vendors from EBP to SUS and have faced with the following issue. In XI I can see that message has status "restart automatically" and the following error occures:
in functional module SXMS_ASYNC_EXEC
CLIENT_RECEIVE_FAILED
ICM_HTTP_CONNECTION_FAILED
Could you please help me to solve this issue?
Thanks and regards,
Siarhei

The error message is:
ICM_HTTP_CONNECTION_FAILED
I have also test URL via direct link in a browser:
http://XXXXX:YYYY/sap/xi/engine?sap-client=ZZZ
and it is working fine.
Regards,
Siarhei

Similar Messages

HTTP client code 400 reason ICM_HTTP_CONNECTION_FAILED

Hi
when using an https receiver adapter in PI 7.11 I get the error message
"HTTP client code 400 reason ICM_HTTP_CONNECTION_FAILED".
The server I am trying to connect to is running and I have activated all services under sap -> xi in SICF.
The ICM log shows this:
WARNING => Connection request from (38/18489/0) to host: https, service: 80 failed (NIEHOST_UNKNOWN)
AP-T38, U18489, 001 ALE_K01, , 15:45:37, M0, W9,     , 1/0 [icxxconn.c 2222]
On the PI Integration Server the outbound queue (smq1) is empty.
However, the message seems to be sitting in the inbound tRFC queue (smq2)
Function Module: SXMS_ASYNC_EXEC
Queue Name: XBTO6___0002
Status Text: Transaction Recorded
I also get the error message in the inbound tRFC queue:
"XI Error ATTRIBUTE_CLIENT.PLAINHTTP_ADAPTER: Queue"
It does not help to chose "save LUW" on the erroneous message in the queue.
In the http receiver adapter I entered these values:
Addressing Type: URL Address
Target Host: https://biztalk.lm-gruppen.dk
Service Number: 443
Path: /******/BTSHTTPReceive.dll
What should I do to make it work?
Mikael

Hi,
In the http receiver adapter I entered these values:
Addressing Type: URL Address
Target Host: https://biztalk.lm-gruppen.dk
Service Number: 443
Path: /******/BTSHTTPReceive.dll
If you want to enable HTTPs, you should use HTTP to RFC destination using SM59 (for the RFC destination) and STRUST (for the SSL authentication). Also, do not specify the http:// or https:// parameter in your target host. The correct parameters should be:
Target Host: biztalk.lm-gruppen.dk
Service Number: 443
Path: /******/BTSHTTPReceive.dll
hope this helps,

RZ21 - ICM_HTTP_CONNECTION_FAILED when adding a new system

HI,
I installed saphostagent on a sateliete system (Linux suse 10 with Oracle 11) to be able to monitor the system with our SolutionManager.
Our Solution Manager is on 7.01 EHP1 support pack 8.(WIndows 2003 with SQLserver 2005)
When I try to add the system to be monitored in Solution Manager with transaction RZ21 I get an error.
In RZ21 : --> technical infrastructure --> configure central system --> create remote monitoring entry
I fill in all the details, and when I save, I get the following error message:
SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")"
I found SAPnote 1450589, which descibes the error, but unfortunately our system is already on the mentioned support pack in this note, so this note is not applicable for us.
Does anyone got an idea on what can be causing this error?
Thanks in advance,
Menno

Hi,
ICF errors nt the program errors, it is just the connection failure errors,
please check the RFC for the managed system which you maintained in the remote monitoring entry in RZ21.
please correct that RFC connection, it could be any reason,check this too
http://help.sap.com/saphelp_nwes70/helpdata/en/45/eea8864e134f858b4d561f53058412/content.htm
Thanks,
Jansi

ICM_HTTP_CONNECTION_FAILED error while testing HTTP RFC in ECC 6 IDES

Hi Experts,
I have ECC 6.0 IDES system - new installation. I have created client 100 which is a copy of client 000. Being an IDES system, client 800 is automatically created.
While trying to connect this system to PI 7.1, I have created one HTTP RFC (H) in client 100 giving the details of PI system which is working perfectly fine. I have maintained the SLD details as well. But on testing the same RFC on client 800, its giving me the error as ICM_HTTP_CONNECTION_FAILED. I have created the user in PI which is maintained as well.
Even If I create a new HTTP RFC connection in client 800, its giving the same error again. User in 100 & 800 is same and both having maximum authorizations. Any opinions on why I am getting the above said error in Client 800?
Thanks & Regards,
Naresh.

Hi,
SMICM Trace file gives the following log when I am testing the HTTP Connection SAP_PID from SM59 of XYZ Client 100:
[Thr 896] IcmConnConnect: direct connect to <fully qualified hostname of PI system:50000>
[Thr 896] NiHsLGetNodeAddr: found hostname '<fully qualified hostname of PI system>' in cache
[Thr 896] NiIGetNodeAddr: hostname '<fully qualified hostname of PI system>' = addr xx.yy.zzz.lmn
[Thr 896] NiIGetServNo: servicename '50000' = port C3.50/50000
And when I am testing the same connection from SM59 of XYZ Client 800, getting the following log:
[Thr 4928] NiHsLGetNodeAddr: hostname 'proxy' not found by operating system
[Thr 4928] *** WARNING => Connection request from (55/18633/1) to host: proxy, service: 8080 failed (NIEHOST_UNKNOWN)
RM-T55, U18633, 800 ADMINISTRATOR, 19:18:49, M1, W2, SM59, 3/2 [icxxconn.c 2341]
I tried to take the restart of the system but still giving the same error.
Any suggestion???
Br,
Naresh.

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

Adobe Document Services SM59 Error ICM_HTTP_CONNECTION_FAILED

Hi,
My so is Windows 64 bits 2003.
When execute the transaction SM59 in my backend show a errro ICM_HTTP_CONNECTION_FAILED.
In the transaction SMICM the ICM Status is green.
Regards Victor.

Victor,
Just try increase the HTTP_TIMEOUT of the Integration Engine:
i) go to TCODE - SXMB_ADM in XI.
ii) Double Click on Integration Engine Configuration .
iii) Click on Change specific configuration button.
iv) Increase the HTTP_TIMEOUT parameter Current Value e.g. 900. You can find this in colomn Category "RUNTIME" Prameters "HTTP_TIMEOUT" Current Value "900".
Regards,
Sarvesh

ABAP Server Proxy - ICM_HTTP_CONNECTION_FAILED

Hi,
i am trying to develop java proxy to abap proxy.
my test pattern JAVA application -> XI -> R/3
proxy setting has no problem, i created inbound proxy by using sproxy.
when i send data by java application with proxy,
i could see data comming from client java proxy on sxmb_moni, after mapping request and technical routing, i got the following error on Adapter call step.
i already tested my inbound abap proxy without problem so that i am aware of knowing abap coding issue or not.
i think that it's XI adapter communication issue from adapter frame work to R/3 side...
so what step do i have to do?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xi.test.com:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xi.test.com:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xi.test.com:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Thu Aug 3 20:22:57 2006 </td></tr> <tr><td>Module:</td><td>icxxconn_mt.c</td></tr> <tr><td>Line:</td><td>2314</td></tr> <tr><td>Server:</td><td>xi_SXD_00</td></tr> <tr><td>Error Tag:</td><td></td></tr> <tr><td>Detail:</td><td>Connection request from (23/16970/0) to host: 70.2.240.70, service: 8000 failed (NIECONN_REFUSED) EX-T23, U16970, 300 XIAFUSER, 70.7.103.208, 20:22:52, M0, W0, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Hi Venjamin,
Here are a list of possible reasons for your problem with solutions.
It could be that it cannot find your file adapter.
1. Have you specified your hostname or IP address? Often the server cannot resolve the ip address for the hostname of your PC.
2. Is the path and port in the directory the same as the path and port of your file adapter?
3. Try question 14 (integration engine section)
/people/mark.finnern/blog/2006/01/12/finally-best-of-sdn-2005
4. also question 11 (in the same section)
5. if the avove will not fix it open XI config guide and
have a look at section
"Connecting Business Systems with an Integration Engine to the Central Integration Server"
6. Your error code is 400, so check this link,
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
For http 400 - its a bad request.
'The request could not be understood by the server due to malformed syntax.'
If you have the XI trouble shooting guide see from page 54,and also try:
1.Check that the port really is the ICM HTTP Port (transaction
SMICM) and not the J2EE port
2.If the port is wrong, change the pipeline URL in the SLD in
the business system of the Integration Server
3.Restart the J2EE Engine to reset the SLD buffer of the
Adapter Engine
Source- "XI troubleshooting guide"
Regards,
Abhy

Error in XI: ICM_HTTP_CONNECTION_FAILED

Hi everyone, have you guys encounter error such like this below. Isn't this kind of error related to the XI internal adapter? Anyone knows how to overcome this? This kind of error occur maybe once a day or once in 2 days. I am not sure what is wrong with this. Thank you so much in advance guys....
PS: Sorry for the copy-paste thing.
"Help
!http://s0004.astra-honda.com:8034/sap/public/icman/img/theme.jpg|alt=SAP|width=122 height=61 border=0 |src=http://s0004.astra-honda.com:8034/sap/public/icman/img/theme.jpg!
404 Resource not found
Partner not reached
Error:
-20
Version:
6040
Component:
ICM
Date/Time:
Tue Jan 23 07:18:44 2007
Module:
icxxconn_mt.c
Line:
2118
Server:
s0004_XP1_34
Detail:
Connection request from (26/31241/0) to host: s0004, service: 53400 failed (NIECONN_REFUSED) AP-T26, U31241, 600 WF-BATCH, 10.4.1.202, 07:18:43, M0, W4, , 1/0
© 2001-2003, SAP AG
</FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>"
Message was edited by:
        Made Wishnu Wardana
Message was edited by:
        Made Wishnu Wardana
Message was edited by:
        Made Wishnu Wardana

Hi,
1) Can you Check whether SLD is active, Try to re start the SLD ,
This might help you
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
2) Check is it time out error, ( Data unable to fetch due to time out error )
3) Go tCode- ST22 and check for the DUMP for more information.
Regards
Agasthuri Doss

ICM_HTTP_CONNECTION_FAILED error in file to proxy??

Hi
In my file to proxy,
i am maintaining one Http RFC destination..intest Connection i am getting 500 as status.
two TCP/IP destinations LCRSAPRFC and SAPSLDAPI.
i am maintaing values in SPROXSET table.
in SLDAPICUST also.
and in SXMB_ADM i configuerd Integration engine.
but i am getting error in sxmb_moni
SAP:P4></![CDATA[>
<SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://dcexi0605.aaaa.com:8030/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://dcexi0605.aaaa.com:8030/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://dcexi0605.aaaa.com:8030/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br><hr><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed Feb 28 12:28:10 2007 </td></tr> <tr><td>Module:</td><td>icxxconn_mt.c</td></tr> <tr><td>Line:</td><td>2121</td></tr> <tr><td>Server:</td><td>ciBGX30_BGX_30</td></tr> <tr><td>Detail:</td><td>Connection request from (42/31087/0) to host: dcesssss08.aaaa.biz, service: 8010 failed (NIECONN_REFUSED) AP-T42, U31087, 100 SOA_AAA, M2B-36-D-1787, 12:28:10, M0, W2, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""></SAP:ApplicationFaultMessage>
<SAP:Stack><b>Error when receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</b></SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
please guide me where i did mistake
regards
Ram

hi friends..
now i am getting HTTP_RESP_STATUS_CODE_NOT_OK HTTP response contains status code 403 with the description Forbidden Error when sending by HTTP (error code: 403, error text: Forbidden)
i maintaind in RZ10 the values.intially port is 8100 , now i changed it 8000
in sxmb_adm..
corresponding Integarion server:
http://hostname:8030/sap/xi/engine?type=entry
the same value is maintained in Sproxset table also
in SMICM -Services Http services port is 8000
please suggest me
regards
Ram

XBTM* queue with sysfail as the FM: SXMS_ASYNC_EXEC failing.

Hi All,
We have a landscape that includes two PI systems between the SAP system and the legacy systems. We received a large message of around 85MB from the legacy system through HTTP adapter. This message was transformed and processed successfully from the 1st PI system in about 1 and half hour time and sent to the 2nd PI system using XI adapter. This PI system contains no Mapping for this interface and just needs to deliver the numerous IDOCs in the payload to the SAP System.
The message size in the second PI system is still 84 MB but the message is stuck in SMQ2 queue XBTM0000 as sysfail with the status text :" Time limit exceeded." as the FM: SXMS_ASYNC_EXEC failing.
We have tried to De register, Register and activating the queue and also executing LUW, but the problem exists.
Any valuable inputs in this regards will be highly appreciated.
Thanks alot in advance.
Regards,
Rahul

Hi Rahul,
As you have already tried de-registering and registering the queue, I can't think of anything else apart from sizing. Try applying the sizing guide to see if that helps.
Regards,
Ramesh.

ICM_HTTP_CONNECTION_FAILED

Hi experts
I am sending fle from XI to R/3 i am getting the below error message in XI SXMB_MONI.
here i am using sender is file adapter and receiver is PROXY.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
</td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2321</td></tr> <tr><td>Server:</td><td>TUAST06XI_TXI_00</td></tr> <tr><td>Error Tag:</td><td></td></tr> <tr><td>Detail:</td><td>Connection request from (23/31412/0) to host: tuasdo06ps, service: 8000 failed (NIEHOST_UNKNOWN) AP-T23, U31412, 300 PIAFUSER, , 16:35:05, M0, W0, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2005, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>

Hi Sreenivas,
Check this thread:
Re: Error ID:CLIENT_RECEIVE_FAILED in ABAP PROXI
Regards,
Ravi

Web service error handling (SOAP 1023 SRT: ICM_HTTP_CONNECTION_FAILED)

Hi there,
When consuimng our web service, sometimes we get the error "SOAP 1023 SRT: Processing error when receiving the response: ICM_HTTP_CONNECTION_FAILED" and this happens when we can't connect to the other system. The requirement is to automatically resend the transaction after +/- 10 seconds. Is there somewhere on the web service settings that will enable us to achieve this without having a background job running every minute?
Thanks.

<p>Hello,</p>
<p> </p>
<p>The first thing you should do is to check that your application server can reach the service your are trying to call. I suggest to try a:</p>
<p> </p>
<p>telnet <remote_service_url> <remote_service_port></p>
<p> </p>
<p>from the command line of your server.</p>
<p> </p>
<p>You should get a blank screen if your server reaches the remote server and something like connecting to <remote_service_url> if you don't.</p>
<p> </p>
<p>Yours,</p>
<p> </p>
<p>Joseba M. Iturbe</p>

Http receiver adapter error : ICM_HTTP_CONNECTION_FAILED

Hi all.
I have set up a receiver http adapter and for the life of me can't get it to work. In sxmb_moni I get the following error in the Call adapter step of the pipeline:
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 400 reason ICM_HTTP_CONNECTION_FAILED</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
It does not matter where I try and post to, it comes back with this. I am using "Url address" for Addressing type.
Help appreciated.

You should check whether the HTTP service is working on your system.
transaction smicm -> goto -> services. check the entry for HTTP. If necessary, a restart of the J2EE server might help.
Also check the http adapter is active.
transaction sicf -> default_host->sap->xi->adapter_plain
Cheers
Manish

Proxy issue with SCM - Error code: 400 ICM_HTTP_CONNECTION_FAILED

We have recently added an SCM system to our landscape. I am trying to upload data to BI within SCM. I have set up the method and tested it and it works fine. I am pulling the data in to XI from a flat file and converting it to XML, which works fine, I have tested the payload in the message mapping test tab. When it trys to connect to the SCM system it looks like it hangs forever in sxmb_moni with the error message.
Error when receiving by HTTP (error code: 400,
error text: ICM_HTTP_CONNECTION_FAILED)
I have also created my proxy in SCM, that seems to be fine as well when I test it.
The communication channels are as follows...
Transport Protocol: HTTP 1.0
Message Protocol: XI 3.0
Adapter Engine:     Integration Server
Addressing Type:   URL Address
Target Host:           <hostname>
Service NUmber:     8000
Path:                     /sap/xi/engine?type=receiver
Auth Type:            Use Logon Data for SAP System
SECOND
I cannot see any errors on the Runtime either because my communiation is not showing up... I have saved it and activiated it. The adapter type is XI.
Any help would be appreciated.
Skip Ford

Hi
Error when receiving by HTTP (error code: 400,
error text: ICM_HTTP_CONNECTION_FAILED)
I have also created my proxy in SCM, that seems to be fine as well when I test it.
The communication channels are as follows...
Transport Protocol: HTTP 1.0
Message Protocol: XI 3.0
Adapter Engine: Integration Server
Addressing Type: URL Address
Target Host: <hostname>
Service NUmber: 8000
Path: /sap/xi/engine?type=receiver
Auth Type: Use Logon Data for SAP System
I think the parameter Path for the server proxy should be
/sap/xi/engine?type=entry
Thanks
Gaurav

Error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Every now and then we are getting the following error on a synchronous call from XI 3.0.
Error when receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)
Usually it is from XI to R/3 (that's where most of our synch calls take place) but occasionally it happen on a synchronous call to a JDBC comm channel.
It is not just one interface that causes this issue and the same interface will be OK if we re-run it with same data.
I suspect some system parameter is off, or it's just a bug in XI. Any one else run into this ? if so, have you found a fix ? SAP hasn't been much help for us thus far.
Thanks in advance for any help.

Hi Tim,
Can you check this thread-
ICM_HTTP_CONNECTION_FAILED
Also check SAP Note 824554,783515,910649,706563.
Cache Refresh~
https://websmp201.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Hope this helps,
Regards,
Moorthy

SXMS_ASYNC_EXEC (ICM_HTTP_CONNECTION_FAILED)

Similar Messages

Maybe you are looking for