SXPG_COMMAND_EXECUTE failed
Dear Experts ,
We have almost completed all the config part ,Now when i am trying to encrypt file using RMSBulk command on Adrms server from "SAP transaction code SM49 or SXPG_COMMAND_EXECUTE " Its Showing encryption falied but Exit status is 'O' (Successfull) because of this status we are not able to Track what is the exact issue.Below are the log file .
""""""""""""""""""""""""""""""""""""""""""""""""""Log file"""""""""""""""""""""""""
Scanning Started
[2014-08-06T11:22:15]: Scanning for tool prerequisites... Completed
[2014-08-06T11:22:15]: Scanning for files... Done
[2014-08-06T11:22:15]: 1 files detected and will be processed.
Scanning Completed
[2014-08-06T11:22:15]: Encrypting files 1 of 1 - E:\sap-adrms\SAP_ADRMS\A3.xlsx ... Failed,
The Manifest file with the tool is c
Summary:
Files Succeeded: 0
Files Failed: 1
Files Unsupported: 0
The Manifest file with the tool is c :->We are not able to trace this status .
But when i am trying to run same RMSBulk command in ADRMS server its successfully run & make the file encrypt .
Can you please guide me to resolve that issue .
Our RFC SAPXPG_DBDEST_SAPSIDDB (Automatically-generated RFC destination for SAPXPG to database host) is working fine .
Thanks & Regards ,
Hemant Gulati
Hi Ralf,
Thanks for the reply.
I could also found that answer on my own.
regards
padma
Similar Messages
-
HI Experts.
My BI consultants are not able to pull the data while execute the Tcode: LISTCUBE.
I could not see any logs any short dumps but in RZ20 i found below error message.ora-00600
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: no_permission: Authorization object S_LOG_COM miss.
Even we checked with our security team even after they assigned full authorization they are getting the same problem.
Could some one provide the solution for this.
Regards
JANSeems to be confusing..
Any error while executing LISTCUBE tcode ?
If suspect authorization issue, did BI team run SU53 just after LISTCUBE ?
For S_LOG_COM, did you see this note once ?
Note 150315 - BW-Authorizations for Remote-User in BW and OLTP
However, following error seems to be confusing containing the term BRTOOLS, not sure what BRTOOLS doing here
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: no_permission: Authorization object S_LOG_COM miss
SXPG error comes for external commands, once check the Notes using this search term. For eg
Note 854060 - Authorizations for external commands
Note 1336776 - External commands: Security for calling side -
SXPG_COMMAND_EXECUTE failed for BRTOOLS
Hi experts,
I have my SAP ECC in a distributed system (CI and DB nodes are different) on Oracle 11G/ Solaris.
When I try to execute any action in db13, appear the following error:
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error: For More Information, See SYS
I follow the SAP Note: 1974030 - How to configure DB13 to work with a standalone Oracle database in Unix/Linux
but I continue with the error
The RFC SAPXPG_DBDEST_HOSTDB works fine but I check in the trace of the proccess is:
LOCATION SAP-Gateway on host adonis.blumaq.local / sapgw00
ERROR timeout during allocate
TIME Tue Sep 9 12:47:24 2014
RELEASE 721
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 2164
DETAIL no connect of TP sapxpg from host adonisdb after 20 sec
COUNTER 6595
Any idea?
Thanks in advance,
Regards,Hello Victor,
and how the parameter gw/remsh is set, could you please check also this section in the note "10403 - Starting external programs":
" c) If the remote shell in your computer is not called remsh
(if you
use a Unix 5.4 system, for example),
you must set the gateway parameter
gw/remsh to the correct name
(which is normally "rsh" in such
cases). You may have to use the
complete path name. To check whether
the remote shell is found,
use the Unix command "which remsh" or "which
rsh" under the
gateway identifier."
Regards,
Alwina -
Hi,
Our Production server is in High Availability on Unix ( DB node active & CI Node active).
When I am executing the initialize tape or triggering the backup from DB13 in our production we are getting the below error.
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: program_start_error:
Even in DB12 when I click on the detailed log of any backup log, it is giving the same error.
In System log we got the below error.
Error 1003 when executing external command brtools on
(in=R,out=M,err=M,trc=0,trm=C. strtstat=,xpgid=0,convid=. msg:)
Error 1003 when executing external command brtools on
(in=R,out=M,err=M,trc=0,trm=C. strtstat=,xpgid=0,convid=. msg:)
RFC SAPXPG_DBDEST_<HOSTNAME> connection test giving the below error
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host ProdApp / sapgw00
Error Details DETAIL: no connect of TP sapxpg from host PROD-DB-SRV
after 20 sec
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 869
Error Details MODULE: gwr3cpic.c
Error Details LINE: 2007
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Mar 30 09:07:51 2010
Error Details VERSION: 2
I have created .rhosts and .rshosts files in both DB & CI nodes under path /home/trpadm as below
CI Node
ProdApp:trpadm 27> cat .rhosts
PROD-DB-SRV
PROD-APP-SRV
ProdApp:trpadm 28> cat .rshosts
PROD-DB-SRV trpadm
PROD-APP-SRV trpadm
trpadm
DB Node
ProdDB:trpadm 2> cat .rhosts
PROD-DB-SRV
PROD-APP-SRV
ProdDB:trpadm 3> cat .rshosts
PROD-DB-SRV trpadm
PROD-APP-SRV trpadm
trpadm
But below command is giving error
ProdApp:trpadm 24> rsh PROD-DB-SRV -l trpadm sapxpg
rshd: 0826-813 Permission is denied.
rsh is happening in both the nodes.
In CI node when iam doing rsh to DB node it is connecting. Pleas find the below logs
ProdApp:trpadm 17> rsh PROD-DB-SRV
trpadm's Password:
Welcome to AIX Version
6.1! *
Please see the README file in /usr/lpp/bos for information pertinent
to *
this release of the AIX Operating
System. *
Last login: Wed Mar 31 11:36:53 IST 2010 on /dev/pts/1 from
Prod_App_boot_1
ProdDB:trpadm 1>
In DB node when iam doing rsh to CI node it is connecting. Pleas find the below logs
ProdDB:trpadm 1> rsh PROD-APP-SRV
trpadm's Password:
Welcome to AIX Version
6.1! *
Please see the README file in /usr/lpp/bos for information pertinent
to *
this release of the AIX Operating
System. *
Last unsuccessful login: Tue Mar 23 16:05:26 IST 2010 on ftp
from ::ffff:10.0.1.39
Last login: Wed Mar 31 11:36:30 IST 2010 on /dev/pts/1 from
Prod_DB_boot_1
ProdApp:trpadm 1>
the below entries are already maintained in /etc/services file on both the nodes.
sapgw30 3330/tcp
sapdp30 3230/tcp
Please look into this and suggest us.Hi,
I have cross checked every thing, it is ok.
Praveen,
As per your suggest, i have changed the background server in DB13. It didnot help us.
Problem is RFC are giving errors.
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host <host> / sapgw00
Error Details DETAIL: no connect of TP sapxpg from host <host> after 20 sec
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 4853
Error Details MODULE: gwr3cpic.c
Error Details LINE: 2007
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Mon Apr 5 09:18:49 2010
Error Details VERSION: 2
When i am doing rsh from one node to another node it is asking for password, but it should not ask.
and also the below error for sapxpg
rsh <hostname> -l <sid>adm sapxpg
rshd: 0826-813 Permission is denied.
i have created .rhosts in both the nodes and maintained the values for hostname with <sid>adm user correctly.
Please look into this and suggest.
Regards,
Raj -
SXPG_COMMAND_EXECUTE failed when executing cleanuplogs in TR DB13
Hi,
I am getting SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error when executing cleanuplogs program in DB13. I have the correct DBHOSTNAME configured in profiles, my SAPXPG rfc is pointing correctly to the database. Also I have the required authorizations to execute SAPXPG program.Could you pls let me know what is the cause of this error and steps to resolve it.
Thanks,
ClarenceHi Sharath
Have you solved your problem? i have the same situation with you, i am very appreciate it if you can reply me
BS
Jon -
SXPG_COMMAND_EXECUTE failed for BRBACKUP
Dear All,
OS : AIX, DB :Oracle , SAP ECC6.0
i got an error and online backup has scheduled in DB13 ( Production Server)
when its reach the backup time its showins error
Status : not Available
JOB LOG:
30.11.2009 17:26:56 Job started
30.11.2009 17:26:56 Step 001 started (program RSDBAJOB, variant &0000000000672, user ID BASIS)
30.11.2009 17:26:56 No application server found on database host - rsh/gateway will be used
30.11.2009 17:26:56 Execute logical command BRBACKUP On host PRODORADB
30.11.2009 17:26:56 Parameters:-u / -jid ALLOG20091130172655 -c force -t online -m all -p initIRPoffsite.sap -a -c force -p initIRP
30.11.2009 17:26:56 offsite.sap -cds
30.11.2009 17:27:28 SXPG_STEP_XPG_START: is_local_host: rc = 403
30.11.2009 17:27:28 SXPG_STEP_XPG_START: host = PRODORADB
30.11.2009 17:27:28 SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
30.11.2009 17:27:28 SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN: rc = 1003
30.11.2009 17:27:28 SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
30.11.2009 17:27:28 SXPG_COMMAND_EXECUTE(LONG)
30.11.2009 17:27:28 <timestamp> = 20091130172728
30.11.2009 17:27:28 COMMANDNAME = BRBACKUP
30.11.2009 17:27:28 ADDITIONAL_PARAMETERS =
30.11.2009 17:27:28 -u / -jid ALLOG20091130172655 -c force -t online -
30.11.2009 17:27:28 m all -p initIRPoffsite.sap -a -c force -p initIRP
30.11.2009 17:27:28 offsite.sap -cds
30.11.2009 17:27:28 LONG_PARAMS
30.11.2009 17:27:28 OPERATINGSYSTEM = ANYOS
30.11.2009 17:27:28 TARGETSYSTEM = PRODORADB
30.11.2009 17:27:28 DESTINATION
30.11.2009 17:27:28 SY-SUBRC = 1003
30.11.2009 17:27:28 SXPG_COMMAND_EXECUTE failed for BRBACKUP - Reason: program_start_error: For More Information, See SYS
30.11.2009 17:27:28 Job cancelled after system exception ERROR_MESSAGE
pls give suggestion to solve this issue
regards
satheeshHi
In Windows we can find Host & services from C:\WINDOWS\system32\drivers\etc
we are using AIX for all servers
below detail for reference
===================================================
ROOT@PRDCIXI:/#ls
.TTauthority bosinst.data perfdata
.Xauthority cdrom proc
.dt clverify_daemon.log sapcd
.dtprofile configassist.log sapcdd
.java dead.letter sapmnt
.mh_profile dev sbin
.profile esa sdtstart.err
.rhosts etc smit.log
.rhosts.previous home smit.script
.sdtgui image.data smit.transaction
.sh_history lib ss.txt
.vi_history lost+found tftpboot
.wmrc lpp tk
CSD mksysb tmp
IRPEXE mnt u
Mail mount.a1253462 unix
TT_DB opt usr
audit oracle var
backup pay websm.script
bin pay1
ROOT@PRDCIXI:/#cat .rhosts
PRODORADB_boot1
PRODORADB_boot2
PRODORADB_svc
PRODORADB_ps
PRDCIXI_boot1
PRDCIXI_boot2
PRDCIXI_svc
PRDCIXI_ps
===================================================
This is APP2 Instanece
ROOT@PRDAPP2:/#ls
.TTauthority TT_DB lpp smit.log
.Xauthority audit mksysb smit.script
.dt bin mnt smit.transaction
.dtprofile bosinst.data nmon tftpboot
.java cdrom opt tk
.profile configassist.log oracle tmp
.rhosts dev pay u
.rhosts.previous esa proc unix
.sdtgui etc sapcd usr
.sh_history home sapcdd var
.ssh image.data sapmnt websm.script
.vi_history lib sbin
.wmrc lost+found sdtstart.err
ROOT@PRDAPP2:/#cat .rhosts
SAP-DEV-QAS root
ROOT@PRDAPP2:/#cat .rhosts.previous
SAP-DEV-QAS root
ROOT@PRDAPP2:/#
========================================
This is APP1 Instanece
ROOT@PRDAPP1:/#ls
.TTauthority TT_DB lpp smit.log
.Xauthority audit mksysb smit.script
.dt bin mnt smit.transaction
.dtprofile bosinst.data nmon tftpboot
.java cdrom opt tk
.profile configassist.log oracle tmp
.rhosts dev pay u
.rhosts.previous esa proc unix
.sdtgui etc sapcd usr
.sh_history home sapcdd var
.ssh image.data sapmnt websm.script
.vi_history lib sbin
.wmrc lost+found sdtstart.err
ROOT@PRDAPP1:/#cat .rhosts
SAP-DEV-QAS root
ROOT@PRDAPP1:/#
You have mail in /usr/spool/mail/root
ROOT@PRDAPP1:/#
ROOT@PRDAPP1:/#cat .rhosts
SAP-DEV-QAS root
ROOT@PRDAPP1:/#cat .rhosts.previous
SAP-DEV-QAS root
ROOT@PRDAPP1:/#
============================================================
kindly advise me i didnt get any hint from host file -
Hi,
When i have configured to take backup using DB13 in production b/w SERVER (SAP ECC 6.0) it is saying the following:
14.01.2008 11:39:41 Job started
14.01.2008 11:39:41 Step 001 started (program RSDBAJOB, variant &0000000000002, user ID BASIS)
14.01.2008 11:39:42 Execute logical command DB6_BACKUP On host prprd1
14.01.2008 11:39:42 Parameters:PBW OFFLINE TO /dev/rmt/0mn BUFFERS 0 BUFFERSIZE 0 PARALLELISM 0
14.01.2008 11:39:43 SXPG_COMMAND_EXECUTE failed for DB6_BACKUP - Reason: command_not_found
14.01.2008 11:39:43 Job cancelled after system exception ERROR_MESSAGE
Actually when it is doing it should execute the following DB6_DBBACKUP logical command but it is saying it used DB6_BACKUP logical command which is not there.
In DB13, when i see the previous backups which were sucessfully completed r not seen, but in the job log SM37 it is showing.
Auditing was done by SAP and kernel is updated for production system. Is it creating any problem?
Expecting a solution.
regards
padmaHi Ralf,
Thanks for the reply.
I could also found that answer on my own.
regards
padma -
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason
Hi,
My CI + DB in Suse Linux and SAP Karnal level is 159
My Dialog instace in on windows server and Karnal level is 159.
When i trying to open the detail log of db13 from Dialog instace it was not opened and shows the error as below ( but it showing from CI server ).
SXPG_COMMAND_EXECUTE failed for BRTOOLS - Reason: x_error
Message no. Q2233
Diagnosis
This message includes variables. No additional information can be specified.
Please suggest the solution.
Regards,
Ravi GhangurdeMost likely you are trying to run an external program in windows that is designed for linux.... to get more info check dev_cp and dev_xpg and post the errors here.
Regards
Juan -
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program
Hello,
We have installed MSCS cluster on OFS for SAP ERP EhP4 SR1.
This installation is successful and both the nodes are running.
However, as soon as i execute any of the DB13 jobs, I get the mentioned error.
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error.
This is stopping us from releasing the system to the end users, which effectively delays our GO-Live till the problem is resolved.
Please advise what all steps or notes are to be followed to make DB13 working in MSCS clusrer.
Regards
AnkitaHi,
Briefly describe your system architecture ?
Have you followed/implemented SAP Notes [446172|https://service.sap.com/sap/support/notes/446172] and [657999|https://service.sap.com/sap/support/notes/657999] carefully, by comparing your existing settings?
Have you analyzed the log entries in SM21, also at Operating system level Logs ?
If you Database is on another host then SAPXPG_DBDEST_<dbhost> or <virtual_dbhost> (a TCP/IP connection) will play an important role for executing SAPXPG command. Test SAPXPG_DBDEST_<dbhost> or <virtual_dbhost> RFC connection with its Trace logs.
Regards,
Bhavik G. Shroff -
Regards the issue on the db13 error is like SXPG_COMMAND_EXECUTE failed
dear all,
we are using
os: windows 2003
databse :oracle 10.2.0.4
sap version: ecc 6.0
& on the production system is on the cluster environment
the issue is when ever i am firing any thing from the db13 it is throwing an error like
SXPG_COMMAND_EXECUTE failed for BRBACKUP - Reason: program_start_error: For More Information, See SYS
Job started
Step 001 started (program RSDBAJOB, variant &0000000000013, user ID BASIs)
Execute logical command BRBACKUP On host xxx
Parameters:-u / -jid TAPIN20100403132120 -i force -c force -n 1 -v SCRATCH
SXPG_STEP_XPG_START: is_local_host: rc = 403
SXPG_STEP_XPG_START: host = xxx
SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN: rc = 1003
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20100403132151
COMMANDNAME = BRBACKUP
ADDITIONAL_PARAMETERS =
-u / -jid TAPIN20100403132120 -i force -c force -n
1 -v SCRATCH
LONG_PARAMS
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = xxx
DESTINATION
SY-SUBRC = 1003
SXPG_COMMAND_EXECUTE failed for BRBACKUP - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
it had became very critical
go live is very near for us
so, kindly help me soon......................
thanks in advance
praveen kumarHi,
You have to install a standalone gateway
follow Note 657999 - Installing a Standalone Gateway in an MSCS Environment
-Joel -
Error in db13 SXPG_COMMAND_EXECUTE failed
Hi
I have ecc6 ehp4 with oracle on windows this is cluster environment, I have installed standalone gateway on node2 successfully as per note 657999 and its up & running
When I keep db and application on separate nodes I cannot schedule any job in db13 I am getting error as below
Job started
Step 001 started (program RSDBAJOB, variant &0000000000039, user ID TABRAYZ)
Execute logical command BRCONNECT On host SAPFNP
Parameters: -u / -jid CHECK20110727155211 -c -f check
Can't exec external program (No such file or directory)
WaitForSingleObject failedwith %d (No such deviceor address)
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: unknown
Job cancelled after system exception ERROR_MESSAGE
Please help me guys.
Thanks
Abdul TabrayzHi,
there are two things that you need to make sure:
1) Make sure your RFC for sxpg should run on gateway host of virtual db in SM59.
2) Please make sure that you should have set additional env variable as per SAP note 378648 for user <sid>adm.
Thanks
Sunny -
DB13 SXPG_COMMAND_EXECUTE failed for backup reason
Dear Gurus,
I am facing error during DB13 since passed few days during backup and update statistics .SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
cancelled after system exception ERROR_MESSAGE..
Please do need full.
Thanks,
Regards,
Snehal PatelHi,
Do you have Standalone gateway on your server ?
You can try Go to the db13 -> goto -> backend configuration
And change background or application server to the database server (where DB physically resides)
If you Database is on another host then SAPXPG_DBDEST_<dbhost> or <virtual_dbhost> (a TCP/IP connection) will play an important role for executing SAPXPG command.
1) Install a Gateway instance on the DB server
2) Mention the Gateway hostname and service ( sapgwxx) in the RFC destination SAPXPG_DBDEST_<DBHOST> using SM59.
Also check the permission of the SAPXPG file.
SAP Note 446172 - SXPG_COMMAND_EXECUTE (program_start_error) in DB13 - Point 8 -
Dear Gurus,
I installed SAP ERP 6 on distributed systems (DB Instance on SAPPRDDB and Central Instance on SAPPRDAP1).
When I ran brbackup from db13 on SAPPRDAP1, it found error as below. What's wrong?
Best regards,
Choosak B.
<<< dev_w19 >>>
M Sat Apr 24 06:19:26 2010
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host sapprdap1 / sapgw00
M * ERROR timeout during allocate
M *
M * TIME Sat Apr 24 06:19:26 2010
M * RELEASE 701
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 242
M * MODULE gwr3cpic.c
M * LINE 2030
M * DETAIL no connect of TP sapxpg from host sapprddb after 20 sec
M * COUNTER 47
M *
M *****************************************************************************
M
A RFC 1485 CONVID 75978469
A * CMRC=27 DATA=0 STATUS=0 SAPRC=242 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLCRFC (Transaction: )
A RFC> User: BASIS (Client: 000)
A RFC> Destination: %_TCPIP_%1 (handle: 1, , )
A *** ERROR => RFC ======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
[abrfcio.c 8178]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
DEST =%_TCPIP_%1
HOST =sapprddb
PROG =sapxpg
[abrfcio.c 8178]
L EXTERNAL COMMAND: rc = Error 1003
L EXTERNAL COMMAND: SAPLSSXP LSSXPF01 FORM WRITE_CALLSTACK
L EXTERNAL COMMAND: SAPLSSXP LSSXPF01 FORM SYSLOG_COM_EXEC
L EXTERNAL COMMAND: SAPLSSXP LSSXPU01 FUNCTION SXPG_STEP_XPG_START
L EXTERNAL COMMAND: SAPLSSXP LSSXPU03 FUNCTION SXPG_STEP_COMMAND_START
L EXTERNAL COMMAND: SAPLSXPT LSXPTU02 FUNCTION SXPG_COMMAND_EXECUTE_LONG
L EXTERNAL COMMAND: SAPLSXPT LSXPTU03 FUNCTION SXPG_COMMAND_EXECUTE
L EXTERNAL COMMAND: RSDBAJOB RSJOBF01 FORM EXEC_ACTION
L EXTERNAL COMMAND: RSDBAJOB RSJOBE01 EVENT START-OF-SELECTION
L SXPG_COMMAND_EXECUTE(LONG):
L <timestamp>: 20100424061926
L COMMANDNAME: BRBACKUP
L ADDITIONAL_PARAMETERS: -u / -jid FLGOF20100424061830 -c force -t offline_
L ADDITIONAL_PARAMETERS: force -m full -p initPRD.sap_disk -a -c force -p i
L ADDITIONAL_PARAMETERS: nitPRD.sap_disk -sd
L LONG_PARAMS:
L OPERATINGSYSTEM: ANYOS
L TARGETSYSTEM: sapprddb
L DESTINATION:
L SY-SUBRC: 1003<<< dev_rd >>>
trc file: "dev_rd", trc level: 1, release: "701"
Sat Apr 24 05:30:13 2010
***LOG S00=> GwInitReader, gateway started ( 11262) [gwxxrd.c 1758]
systemid 370 (Solaris on SPARCV9 CPU)
relno 7010
patchlevel 0
patchno 83
intno 20020600
make: single threaded, Unicode, 64 bit, optimized
pid 11262
gateway runs with dp version 244000(ext=110000) (@(#) DPLIB-INT-VERSION-244000-UC)
gateway (version=701.2009.11.18)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
Bind service sapgw00 (socket) to port 3300
Sat Apr 24 05:30:14 2010
GwPrintMyHostAddr: my host addresses are :
1 : [10.1.1.4] sscprdap1 (HOSTNAME)
2 : [127.0.0.1] localhost (LOCALHOST)
3 : [10.1.1.5] sapprdap1_bge0 (NILIST)
4 : [10.1.1.6] sapprdap1_nxge0 (NILIST)
5 : [192.168.1.3] 192.168.1.3 (NILIST)
Full qualified hostname = sapprdap1.sermsukplc.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Sat Apr 24 05:30:15 2010
DpShMCreate: sizeof(wp_adm) 44000 (1760)
DpShMCreate: sizeof(tm_adm) 6042880 (30064)
DpShMCreate: sizeof(wp_ca_adm) 31232 (104)
DpShMCreate: sizeof(appc_ca_adm) 10400 (104)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2080)
DpShMCreate: sizeof(wall_adm) (40056/36728/88/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff7bc00000, size: 6762832)
DpShMCreate: allocated sys_adm at 0xffffffff7bc00000
DpShMCreate: allocated wp_adm at 0xffffffff7bc02388
DpShMCreate: allocated tm_adm_list at 0xffffffff7bc0cf68
DpShMCreate: allocated tm_adm at 0xffffffff7bc0cfc8
DpShMCreate: allocated appc_ca_adm at 0xffffffff7c1d7ec8
DpShMCreate: allocated comm_adm at 0xffffffff7c1da768
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0xffffffff7c260448
DpShMCreate: allocated gw_adm at 0xffffffff7c2604c8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff7c2604f8
MtxInit: -2 0 0
Sat Apr 24 05:30:17 2010
GwDpInit: attached to gw_adm at 0xffffffff7c2604c8
sapprddb: Connection refused
Sat Apr 24 06:19:26 2010
child (pid=11328) exited with exit code 1 -
DB13 job failed due to SXPG_COMMAND_EXECUTE error
Hi,
I received an error when I try run the BRCONNECT Database Action Calendar (tx. DB13), either it's a Database check, statistics updates, etc. The error messages are as follows:
Job started
Step 001 started (program RSDBAJOB, variant &0000000000166, user ID SETIR0)
No application server found on database host - rsh/Gateway will be used
Execute logical command BRCONNECT On host tdcwsxd1
Parameters: -u / -c -f check
SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
FYI, we're using DB instance (DB) and Central Instance (CI) on each separate box in the unix environments. SAP Basis rel. 620 with SP level SAPKB62053.
If I execute the command directly in DB instance, it works fine but not from SAP trx DB13.
Command: brconnect -u / -c -f check.
Thanks and best regards,
MarkHi Mark,
Sorry I see you are running on Unix, I am only familiar with Windows environment, but however on Windows I would do the following:
1) Install a so called Standalone Gateway on the DB-host.
2) copy the sapxpg executable to the directory where the gateway is installed.
2) Change the SAPXPG_DBDEST... RFC connection to point to, or use this gateway (gateway options).
That's all....
(How to Install a standalone gateway or Gateway instance is normally described in the SAP installation guide).
But as I sad, I am not sure if this is possible under Unix also, and the way to go...
Regards
Rolf -
DBA:CHECKDB__ is getting failed
Hi All,
One of the job in SM37 is getting cancelled.
DBA:CHECKDB__
8.04.2009 11:00:00 Job started
8.04.2009 11:00:00 Step 001 started (program RSDBAJOB, variant &0000000000189, user ID ECCDBA)
8.04.2009 11:00:00 No application server found on database host - rsh/gateway will be used
8.04.2009 11:00:00 Execute logical command BRCONNECT On host isrecprdb1
8.04.2009 11:00:00 Parameters: -u / -jid CHECK20090408110000 -c -f check
8.04.2009 11:00:39 SXPG_STEP_XPG_START: is_local_host: rc = 403
8.04.2009 11:00:39 SXPG_STEP_XPG_START: host = isrecprdb1
8.04.2009 11:00:39 SXPG_STEP_XPG_START: is_local_r3_host: rc = 802
8.04.2009 11:00:39 SXPG_STEP_XPG_START: RFC_TCPIP_CONNECTION_OPEN returned rc_cannot_get_rfc_dests
8.04.2009 11:00:39 SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 901
8.04.2009 11:00:39 SXPG_COMMAND_EXECUTE(LONG)
8.04.2009 11:00:39 COMMANDNAME = BRCONNECT
8.04.2009 11:00:39 OPERATINGSYSTEM = ANYOS
8.04.2009 11:00:39 TARGETSYSTEM = isrecprdb1
8.04.2009 11:00:39 DESTINATION =
8.04.2009 11:00:39 SXPG_COMMAND_EXECUTE failed for BRCONNECT - Reason: x_error
8.04.2009 11:00:39 Job cancelled after system exception ERROR_MESSAGE
When I checked the RFC in sm59 from one of the application server it got failed-;
SAPXPG_DBDEST_ISRECPRDB1
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host isrecprddi / sapgw77
Error Details DETAIL: no connect of TP /sapmnt/REP/exe/sapxpg from host isrecprdb1.indiabull
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 80003
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1973
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Wed Apr 8 19:43:30 2009
Error Details VERSION: 2
Pls help.
Regards,
Prashantno connect of TP /sapmnt/REP/exe/sapxpg from host isrecprdb1.indiabull
This means that the job is calling an external program that is trying to connect to a resource that is not available...
Check xpg logs at dev_xpg and dev_cp
Regards
Juan
Maybe you are looking for
-
WEB_SERVICES_25oct06
Using SOAP with Tomcat SOAP-ENV:Server.BadTargetObjectURI I too have this reoccurring problem � Have any of the individuals who have experienced this problem found a solution yet? I have carefully followed through O'Reilly's �Hello SOAP!� example ste
-
URGENT: Using VB to query Oracle9i DB
Hi, I have a Microsoft Visual Basic program that accesses an Oracle Database. Previously the database was an Access database and I used the Migration Workbench to migrate to Oracle. I can get an ODBC connection to the database just fine and some quer
-
Time series chart doesn't work
I am trying to create a simple time series chart, plotting five time series over a 5 year period. I have a table with the time series in rows, but when I select the chart to graph it, the data appears as if the time series is in the columns! Then, wh
-
Snow Leopard 10.6.8 to Maverick 10.9
I recently had to reload my I Mac with Snow Leopard. Currently running 10.6.8. Have down loaded Maverick 10.9.3 Combo pack. When I try to run 10.9.3 it errors and says I need 10.9. Apple store icon will not work as it wants 10.9. Where can
-
Where's the customer support????
Where's the customer support???? I have two purchased CC memberships and I am unable to access them. Waste of money. Someone please tell me how you can actually contact Adobe to solve things instead of forums that waste our time.