.sxw to .doc

hi.
My office got me a new pc, and it had open office installed instead of word. To save time, and since it looked similar, i just did my work in that, and everytime i tried to save it as a word file, it would say any changes would not be saved and i kept losing work. so i just saved both my "excel" sheet and my text as a .sxc and .sxw respectively.
I mailed the work to my boss only to have him say it doesnt open. I had ms office installed, and now the files wont open! i cant lose the work or any information from it. What do i do? im not looking forward to re-doing the entire work on ms office!!! please help.

thanks for coming in for the rescue haha but after reading that ive found im even less IT savvy than i thought..
so excuse this if im not getting it right..but do u think it will work if i install star office again..but 8 this time..(because if i try to open in word format normally, all it leads to is breaking up of the document into codes AND since there is no open office now, i cant print the SXW, much less even Open it)..and then open the sxw and copy paste sections into ms word which ill open side by side.
does it look like itll work?
thanks n later.
sabene.

Similar Messages

  • Conversion from SXW to DOC without StarOffice

    I have a situation in which I have a number of text and tabular files with the SXW extension but I need to convert them into MSOffice analogs. My problem is I cannot install StarOffice on this machine and no longer have access to a StarOffice machine. Any hope?>
    There is a (slight) possibility of installing StarOffice between backups but only if I get a very thorough uninstall process, completely cleaning out the registry and other non-obvious or hidden files.
    Can do?

    What did you use to convert - ExportPDF?  Can you post a screenshot of how your converted document looks; see http://forums.adobe.com/thread/1070933

  • Is it possible to convert .doc to pdf  ?

    Hi..
    I am very new to Livecycle Workflow...! I just want to know whether it is possible to convert .doc to pdf  ?
    Just by googling i came to know that CreatePDF2 Service will do this Conversion ! But it throws me an Exception like "Conversion Exception :" Cannot connect to Adobe Service "...!
    Can u guys pls help me out to slove the problem ?
    Thanks & Regards
    Karthik.

    you don't know the format of a word doc? well, that's good for you because it's a nightmare.
    - check POI (http://jakarta.apache.org/poi/index.html) to see if you can load-up the .doc then generate the .pdf with iText
    - personally i use the Open Office Bean to open the .doc, i save it in .sxw (OO format which is a jar of different XML files), then i use XSLT to transform content.xml in .fo then use FOP to build the PDF. sounds crazy but works fine (only on a machine with graphic support - not via Telnet, etc...)

  • IPad AiO app: Sharing multiple files/docs at one time?

    iPad AiO remote app:  I cannot share more than one file or doc at a time to Cloud storage, even though you can 'select all' the app does not seem to allow you to share a group at one time.  Is there a work around for this? 

    Hello aqtpa33629,
    Welcome to the HP Support Forums!
    I see that you are using the AiO remote app and are trying to upload files to your Cloud storage. The "Select All" option is for selecting all files to delete, not uploading.
    The app is only allowing one file to upload because only one file can be opened at one time.
    Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • ISA: Billing doc search

    Dear guru's
      The Billing doc search in the ISA searches both open and closed billing docs(Invoices, Credit Memos). How do I restrict to get only the open items in the search.
    Thanks,
    Vivek.

    Hi Vivek,
            Use the following logic.
    Note : lit_isu_cont contains the list of isu contracts,lit_isu_cont-lv_vertrag.
    SELECT belnr vertrag endabrpe bergrund abrvorg loevm
            FROM erch
            INTO TABLE lit_bill_data
            FOR ALL ENTRIES IN lit_isu_cont
            WHERE vertrag = lit_isu_cont-lv_vertrag
            AND ( bcreason = space
                  AND loevm = space
                  AND simulation = space ).
    If sy-subrc = 0.
    " Billing document exits ".
    endif.
    Hope this helps.
    Regards,
    Kapil

  • Open sales orders and open deliveries and open billing doc to sap from legesy

    Dear all
    i have some open sales orders and open deliveries and open billing doc are there in the legesy system
    so i want to know how to transfer the doc to sap by using lsmw plz tell me

    Hi Amith,
    it is always good to search in Google before posting .LSMW is very old topic and i am sure you will get lots of Documents on this .Please go through the below link .you will get some idea on this.
    http://scn.sap.com/thread/1012472
    there are 14 steps in LSMW and it is same for all (master data and Transaction Data)
    Pls practice this in your sand box or quality system before working it in the client requirement.
    Hope this helps to you
    Regards
    Sundar

  • Open Doc - & in Child report prompts issue

    Hi,
       I am opening a child report using open doc function. This works fine but if there is no LOV in Child report with ampersend (&)
       ="<a href=\"http://server/XI/opendoc/openDocument.jsp?sType=wid&iDocID=7544&sWindow=Same&lsSSelectBusinessGroup:="[vTeam]"&lsSSelectOrgLevel01:="[Current].[Org Level 03]"&sRefresh=Y\">"[Current].[Org Level 03]+"</a>"
    If valuue of [Current].[Org Level 03] has value eg: 'R&D' the child report is selecting only upto 'R' excluding '&D'. Because of this no data is seen.
      Can anyone help?

    Hi,
    This is because of the character &.
    You need to enclose the value in double quotes. Use Char(34) while forming the url.
    ="<a href=http://server:port/opendoc/openDocument.jsp?sType=wid&iDocID=7544&lsSSelect+Business+Group:="+[vTeam]+"&lsSSelect+Org+Level+01:="+Char(34)+[Current.Org Level 03]+Char(34)+"&sRefresh=Y>"+[Current.Org Level 03]+"</a>"
    Also you can try replacing & with
    &amp;
    in the url using Replace function.
    If
    &amp;
    does not work, then try
    %26
    Regards

  • Open Pages doc from server by two persons !!!

    Hi,
    We have noticed that you can open a pages doc from a Apple MAcOS X Server from two diffrent persons, what wil result in not saving any data. Normal you CAN'T open a file that s already open ... !! This is a really big risk .. ?
    What to do about this .. ?

    This is a flaw that has existed since version 1 of Pages. My solution is to work locally and save globally (locked). It is a pain, I know, but it keeps multiple people from attempting to work on the same file at one time.

  • Print a report on doc format truncate data

    hi
    I have a report launching with a form in an oracle applications, when I print a report on pdf format looks ok
    but when I print the same report on doc format truncate data on left and right side.
    Can you help me
    thanks

    Hi Herbe
    Reports does not support .doc format. Are you referring .rtf format?
    In any case, you must contact Oracle Support to get the issue resolved.
    Regards
    Sripathy

  • Can we change billing doc without cancelling( excise invoice is subsequent)

    Dear all,
    Here is a urgent issue
    One Excise invoice has been created with reference to a billing document
    and we have not maintained tax code in that condition records so it is not allowing to release the doc for accounting entries
    now my requirement is without cancelling the excise invoice and also not to do transaction  J1ih,( to create excise JV for direct GL entries
    i want to change the billing document
    Thanks in advance

    have not maintained tax code in that condition records
    While it is not necessary to reverse the excise invoice, the fact is that since tax code was not flowing in billing document, I am sure, excise duty would also not be flowing, in which case, your excise invoice is also generated for wrong value. 
    I would be surprised if you say that excise values are flowing in billing document and also in excise invoice and if your issue is only tax, then as already suggested, maintain a condition record (with the date in line with pricing date in billing document) and try.
    G. Lakshmipathi

  • How do you allow multiple users share a common folder that is on the doc?

    I'm coming from many years as an OS 8.6 user. My family expects me to wade though all of the documentation and figure out how to make using the computer easy. One feature they liked was the way I set up the Apple Menu so that only the programs were listed. The categories were Applications, Diversions, Internet, and Utilities. This masked all of the other stuff that may have been associated with a program from them.
    I would like to do the same in OS X (10.4.7). So, in /users/shared I created a folder named of all things "Apple Menu". In this folder I've created new folders for Applications, Diversions, Internet, and Utilities. Into these folders I placed aliases to the various programs. I then took this folder and dragged it to the Doc. On my Doc, with I control click the "Apple Menu" folder, I see my folder names with drop downs listing all of the aliases just like in OS 8.6. Unfortunately, on the other user accounts after dragging the folder /users/shared/apple menu to the Doc, they can only see aliases to files that came with the system. They can not see any of the new files that I've added. How do I set this up so that I maintain one folder of the aliases to various programs and yet every account can see all of these aliases?
    I don't want the Doc cluttered with applications that are not used all of the time. At the same time I don't want to have to navigate to some sub-directory and scan a list of files looking for the application everytime I want to run it. The rest of my family members would go nuts. As a matter of fact, I think I would also. I liked the Apple Menu in OS 8.6. I think this Doc folder thing might just work, if I can get past this security/permissions issue.
    Thanks for the advice.
    Joe
    17" iMac G5   Mac OS X (10.4.7)   various Mac running OS 8.6

    Thanks for the suggestions offered so far, but they don't get to the root of the issue. I only want to maintain one, and only one, "Apple Menu" folder. I'm not looking to restrict user access. I'm trying to streamline user access for those who are not comfortable navigating down 2 or 3 or more levels of directories looking for the "applications". As Administrator I do this at the time an application is installed and place an alias to the application in the appropriate "Apple Menu" folder so that my family members can quickly and easily access it.
    I built the "Apple Menu" folder and placed it in /user/shared. I also built all of the aliases to the applications and placed them in the appropriate sub folder of "Apple Menu". I've chosen, "Applications", "Diversions", "Internet", and "Utilities" as the sub folders.
    Some of the aliases, while logged into a non-administrator account do not show up in the "Apple Menu" while others do. For example TextEdit appears while TextWrangler, which I installed does not. I thought that only programs that I installed are not showing up, but this is not true. I installed Reunion and this program is visible from the non-administrator accounts. Yet I can navigate to the item not appearing in the "Apple Menu" and launch it.
    The top folder's owner is myself, the group is "wheel" and it has read permission, and everyone has read permission. I've made myself and the other users members of the group wheel. And I've propogated these values down the folder hierarchy starting at "Apple Menu". I would like to know why this isn't working?
    Though Classic Apple Menu and XMenu sound like good alternatives in each case I would be responsible for setting these applications up in each environment. I only want to do this set up once as administrator and know that all of system's users have access to this information from the Dock.
    Is there some kind of installation step missing that is not permitting these aliases from being seen by all of the system's users?
    Again, thanks for the advice,
    Joe

  • After choosing a blank template in PAGES, i am unable to type in the main body of the docs. I have to open a text box to type. Pls help

    Hi all, need help here. I just face this problem today. When i click the pages icon and after choosing a blank template, i am unable to type anything in the document. All icons in the format bar at the top cannot be clicked (font, font size etc). I will have to open a text box in order to type it.
    If i open an existing PAGES doc, duplicate and rename it, then i delete all existing text that i have written, only then i can type in at the doc.
    To illustrate my problem, attached is a pic from my Macbook screen
    Please help.

    Maybe try turning on the grammar checker.

  • Link to trigger a .pdf or .doc file to show in presentation

    I would like to add a link that would trigger the showing of a .pdf file or a .doc file within the presentation itself. I can do this in powerpoint. There must be some way to do this in Keynote, but I can't figire out how to do this. Thanks for any ideas.

    Keynote does not allow links to anything but other Keynote presentations, websites, or email. However, you can use Expose or Command-Tab to quickly switch to a PDF or Word file.

  • Error in Creating a XML Doc

    i am having a error in the fellowing program.
    When i create a xml file.Entire XML file is printed in a single line.
    import org.w3c.dom.*;
    import javax.xml.parsers.*;
    import javax.xml.transform.*;
    import javax.xml.transform.dom.DOMSource;
    import javax.xml.transform.stream.StreamResult;
    class CreateDomXml
    public static void main(String[] args)
    try{
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder docBuilder = factory.newDocumentBuilder();
    Document doc = docBuilder.newDocument();
    Element root = doc.createElement("root");
    doc.appendChild(root);
    Comment comment = doc.createComment("This is comment");
    root.appendChild(comment);
    Element childElement = doc.createElement("Child");
    childElement.setAttribute("attribute1","The value of Attribute 1");
    root.appendChild(childElement);
    TransformerFactory tranFactory = TransformerFactory.newInstance();
    Transformer aTransformer = tranFactory.newTransformer();
    Source src = new DOMSource(doc);
    Result dest = new StreamResult(System.out);
    Result dest = new StreamResult(new File("hello.xml"));
    aTransformer.transform(src, dest);
    }catch(Exception e){
    System.out.println(e.getMessage());
    OUTput
    *<?xml version="1.0" encoding="UTF-8" standalone="no"?><root><!--This is comment--><Child attribute1="The value of Attribute 1"/></root>*
    Edited by: psathishcs on May 29, 2008 6:24 PM

    what do you expect it to print?
    your output is set to System.out, not a file.

  • Error while creating Billing doc using VF01 for Debit memo req. from RRB

    Hi,
    I am creating billing doc for my Debit memo req. which is created using RRB(DP90, DP95).
    Error message - Item 000010 does not exist.
    When I debugged and looked into code it seems following lines are causing problem.
    Program
    LV60AA28
    Line u2013 734
      IF  vbap-vkgru EQ vkgru_dyn_posten.
        IF vbap-aufnr IS INITIAL .
    set AUBEL because it was overwritten by VBAP-VBELN
          vbrp-aubel = vbap-vgbel.
          vbrp-aupos = vbap-vgpos.
          vbrp-autyp = vbap-vgtyp.
    This code was not in 4.6 system.
    We have just migrating from 4.6 to 6.0 and facing this issue while testing.

    First of all you should try to learn how to express in a public forum like this. 
    On your comments
    Do some ground work from your end
    why should I ??  if you want you can do ground work or any work.  If you post a question, you have to hear patiently all suggestions and dont scribble whatever you want.
    You should have some basic
       understanding of SAP ABAP.
    You should have posted this question ABAP forum !!!!   Why without any sense you have posted in sales forum ??

Maybe you are looking for